From mboxrd@z Thu Jan 1 00:00:00 1970 From: Preetham Chandru Ramchandra Subject: [PATCH V5 3/3] dt-bindings: tegra: add binding documentation Date: Fri, 30 Jun 2017 19:26:33 +0530 Message-ID: <1498830993-24666-4-git-send-email-pchandru@nvidia.com> References: <1498830993-24666-1-git-send-email-pchandru@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1498830993-24666-1-git-send-email-pchandru-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, cyndis-/1wQRMveznE@public.gmane.org Cc: preetham260-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, pkunapuli-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, Preetham Chandru R List-Id: linux-ide@vger.kernel.org From: Preetham Chandru R This adds bindings documentation for the AHCI controller on Tegra210 Signed-off-by: Preetham Chandru R --- v4: * changed the commit message * changed 'sata-cold' reset to mandatory for t210 and t124 * Removed the regulators for T210 since these regulators will be enabled in phy driver. v3: * Add AUX register. v2: * change cml1, pll_e and phy regulators as optional for T210. --- .../bindings/ata/nvidia,tegra124-ahci.txt | 38 ++++++++++++++-------- 1 file changed, 25 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt index 66c83c3..df4dc2c 100644 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt @@ -1,20 +1,19 @@ -Tegra124 SoC SATA AHCI controller +Tegra SoC SATA AHCI controller Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, - must contain '"nvidia,-ahci", "nvidia,tegra124-ahci"', where - is tegra132. -- reg : Should contain 2 entries: +- compatible : Must be one of: + - Tegra124 : "nvidia,tegra124-ahci" + - Tegra210 : "nvidia,tegra210-ahci" +- reg : Should contain 3 entries: - AHCI register set (SATA BAR5) - SATA register set + - Tegra210 : AUX register set - interrupts : Defines the interrupt used by SATA - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - sata - sata-oob - - cml1 - - pll_e - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -24,9 +23,22 @@ Required properties : - phys : Must contain an entry for each entry in phy-names. See ../phy/phy-bindings.txt for details. - phy-names : Must include the following entries: - - sata-phy : XUSB PADCTL SATA PHY -- hvdd-supply : Defines the SATA HVDD regulator -- vddio-supply : Defines the SATA VDDIO regulator -- avdd-supply : Defines the SATA AVDD regulator -- target-5v-supply : Defines the SATA 5V power regulator -- target-12v-supply : Defines the SATA 12V power regulator + - For T124: + - sata-phy : XUSB PADCTL SATA PHY + - For T210: + - sata-0 +- For T124: + - hvdd-supply : Defines the SATA HVDD regulator + - vddio-supply : Defines the SATA VDDIO regulator + - avdd-supply : Defines the SATA AVDD regulator + - target-5v-supply : Defines the SATA 5V power regulator + - target-12v-supply : Defines the SATA 12V power regulator + +Optional properties: +- clock-names : + - cml1 : + cml1 clock is required by phy so it is optional to define + here as phy driver will be enabling this clock. + - pll_e : + pll_e is the parent of cml1 clock so it is optional to define + here as phy driver will be enabling this clock. -- 2.1.4