[PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.

Arvind Yadav
2017-11-25T04:15:56Z

Here, The function pdc_hardware_init always return zero. So it is not
necessary to check its return value.

Fix these checkpatch.pl error:

ERROR: space prohibited after that '~' (ctx:WxW)
+ mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));

ERROR: spaces required around that '?' (ctx:VxW)
+ long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;

ERROR: that open brace { should be on the previous line
+ const struct ata_port_info *ppi[] =
+ { &pdc2027x_port_info[board_idx], NULL };

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
drivers/ata/pata_pdc2027x.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index ffd8d33..9a953ef 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -277,7 +277,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
ATA_ID_PROD_LEN + 1);
/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
- mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+ mask &= ~(1 << (6 + ATA_SHIFT_UDMA));

return mask;
}
@@ -520,7 +520,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u16 pll_ctl;
long pll_clock_khz = pll_clock / 1000;
- long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
+ long pout_required = board_idx ? PDC_133_MHZ:PDC_100_MHZ;
long ratio = pout_required / pll_clock_khz;
int F, R;

@@ -707,8 +707,8 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
unsigned int board_idx = (unsigned int) ent->driver_data;
- const struct ata_port_info *ppi[] =
- { &pdc2027x_port_info[board_idx], NULL };
+ const struct ata_port_info *ppi[] = {
+ &pdc2027x_port_info[board_idx], NULL };
struct ata_host *host;
void __iomem *mmio_base;
int i, rc;
@@ -753,8 +753,7 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
//pci_enable_intx(pdev);

/* initialize adapter */
- if (pdc_hardware_init(host, board_idx) != 0)
- return -EIO;
+ pdc_hardware_init(host, board_idx);

pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
@@ -778,8 +777,7 @@ static int pdc2027x_reinit_one(struct pci_dev *pdev)
else
board_idx = PDC_UDMA_133;

- if (pdc_hardware_init(host, board_idx))
- return -EIO;
+ pdc_hardware_init(host, board_idx);

ata_host_resume(host);
return 0;
--
2.7.4