From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>, Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
Date: Thu, 7 Dec 2017 03:45:25 +0900 [thread overview]
Message-ID: <1512585925-4251-1-git-send-email-ykaneko0929@gmail.com> (raw)
From: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Because power of Salvator-X board is cut off in suspend,
it needs to reset SATA PHY state in resume.
Otherwise, SATA partition could not be accessed anymore.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@rvc.renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the for-next branch of libata tree.
drivers/ata/sata_rcar.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 80ee2f2..aba6121 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -977,11 +977,43 @@ static int sata_rcar_resume(struct device *dev)
struct sata_rcar_priv *priv = host->private_data;
void __iomem *base = priv->base;
int ret;
+ u32 val;
ret = clk_prepare_enable(priv->clk);
if (ret)
return ret;
+ /* Re-use from sata_rcar_init_controller() */
+ /* reset and setup phy */
+ switch (priv->type) {
+ case RCAR_GEN1_SATA:
+ sata_rcar_gen1_phy_init(priv);
+ break;
+ case RCAR_GEN2_SATA:
+ sata_rcar_gen2_phy_init(priv);
+ break;
+ default:
+ dev_warn(host->dev, "SATA phy is not initialized\n");
+ break;
+ }
+
+ /* SATA-IP reset state */
+ val = ioread32(base + ATAPI_CONTROL1_REG);
+ val |= ATAPI_CONTROL1_RESET;
+ iowrite32(val, base + ATAPI_CONTROL1_REG);
+
+ /* ISM mode, PRD mode, DTEND flag at bit 0 */
+ val = ioread32(base + ATAPI_CONTROL1_REG);
+ val |= ATAPI_CONTROL1_ISM;
+ val |= ATAPI_CONTROL1_DESE;
+ val |= ATAPI_CONTROL1_DTA32M;
+ iowrite32(val, base + ATAPI_CONTROL1_REG);
+
+ /* Release the SATA-IP from the reset state */
+ val = ioread32(base + ATAPI_CONTROL1_REG);
+ val &= ~ATAPI_CONTROL1_RESET;
+ iowrite32(val, base + ATAPI_CONTROL1_REG);
+
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
--
1.9.1
next reply other threads:[~2017-12-06 18:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-06 18:45 Yoshihiro Kaneko [this message]
2017-12-06 18:56 ` [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes Geert Uytterhoeven
2017-12-19 8:26 ` Simon Horman
2017-12-28 22:16 ` Yoshihiro Kaneko
2017-12-30 10:28 ` Sergei Shtylyov
2018-01-01 10:38 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512585925-4251-1-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=linux-ide@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox