[ 8348.620026] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[ 8348.621645] ata1: irq_stat 0x00b40090, PHY RDY changed
[ 8348.623295] ata1: hard resetting link
[ 8358.626310] ata1: softreset failed (timeout)
[ 8358.627924] ata1: hard resetting link
[ 8361.391599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 8361.393811] ata1.00: ATA-8: ST3000DM001-9YN166, CC4H, max UDMA/133
[ 8361.395466] ata1.00: 5860533168 sectors, multi 0: LBA48 
[ 8361.397671] ata1.00: configured for UDMA/100
[ 8361.398342] ata1: EH complete
[ 8361.399205] scsi 0:0:0:0: Direct-Access     ATA      ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5
[ 8361.438676] sd 0:0:0:0: Attached scsi generic sg10 type 0
[ 8361.438689] sd 0:0:0:0: [sdj] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 8361.438694] sd 0:0:0:0: [sdj] 4096-byte physical blocks
[ 8361.438888] sd 0:0:0:0: [sdj] Write Protect is off
[ 8361.438896] sd 0:0:0:0: [sdj] Mode Sense: 00 3a 00 00
[ 8361.438971] sd 0:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8361.487871]  sdj: sdj1 sdj2
[ 8361.489045] sd 0:0:0:0: [sdj] Attached SCSI disk
[10562.688262] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10562.689701] ata1.00: irq_stat 0x00060002, PCI master abort while transferring data
[10562.691127] ata1.00: failed command: READ DMA
[10562.692609] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10562.695565] ata1.00: status: { Busy }
[10562.697060] ata1: hard resetting link
[10562.698547] ata1: controller in dubious state, performing PORT_RST
[10564.889203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[10564.891970] ata1.00: configured for UDMA/100
[10564.893545] ata1: EH complete
[10565.028037] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10565.029608] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10565.031207] ata1.00: failed command: READ DMA
[10565.032784] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10565.035952] ata1.00: status: { Busy }
[10565.037543] ata1: hard resetting link
[10565.039140] ata1: controller in dubious state, performing PORT_RST
[10567.228972] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[10567.231793] ata1.00: configured for UDMA/100
[10567.233456] ata1: EH complete
[10567.368096] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10567.369692] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10567.371315] ata1.00: failed command: READ DMA
[10567.372995] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10567.376224] ata1.00: status: { Busy }
[10567.377851] ata1: hard resetting link
[10567.379492] ata1: controller in dubious state, performing PORT_RST
[10569.568810] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[10569.571690] ata1.00: configured for UDMA/100
[10569.573371] ata1: EH complete
[10569.707698] ata1: limiting SATA link speed to 1.5 Gbps
[10569.709374] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10569.711087] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10569.712777] ata1.00: failed command: READ DMA
[10569.714466] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10569.717913] ata1.00: status: { Busy }
[10569.719683] ata1: hard resetting link
[10569.721770] ata1: controller in dubious state, performing PORT_RST
[10571.912619] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10571.915665] ata1.00: configured for UDMA/100
[10571.917481] ata1: EH complete
[10572.051552] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10572.053372] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10572.055229] ata1.00: failed command: READ DMA
[10572.057046] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10572.060734] ata1.00: status: { Busy }
[10572.062609] ata1: hard resetting link
[10572.064484] ata1: controller in dubious state, performing PORT_RST
[10574.257205] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10574.260335] ata1.00: configured for UDMA/100
[10574.262294] ata1: EH complete
[10574.399322] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10574.401276] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10574.403257] ata1.00: failed command: READ DMA
[10574.405205] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10574.409144] ata1.00: status: { Busy }
[10574.411542] ata1: hard resetting link
[10574.413555] ata1: controller in dubious state, performing PORT_RST
[10576.604232] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10576.607520] ata1.00: configured for UDMA/100
[10576.609563] sd 0:0:0:0: [sdj] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10576.611611] sd 0:0:0:0: [sdj] tag#0 Sense Key : Aborted Command [current] 
[10576.613654] sd 0:0:0:0: [sdj] tag#0 Add. Sense: Scsi parity error
[10576.616047] sd 0:0:0:0: [sdj] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 d3 d3 e0 00 00 01 00 00 00
[10576.618148] blk_update_request: I/O error, dev sdj, sector 13882336
[10576.620285] ata1: EH complete
[10576.759123] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10576.761194] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10576.763277] ata1.00: failed command: READ DMA
[10576.765334] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10576.769458] ata1.00: status: { Busy }
[10576.771537] ata1: hard resetting link
[10576.773567] ata1: controller in dubious state, performing PORT_RST
[10578.964029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10578.967309] ata1.00: configured for UDMA/100
[10578.969352] ata1: EH complete
[10579.102837] ata1.00: limiting speed to UDMA/66:PIO4
[10579.104858] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10579.106911] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10579.108930] ata1.00: failed command: READ DMA
[10579.110962] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10579.115015] ata1.00: status: { Busy }
[10579.117024] ata1: hard resetting link
[10579.119025] ata1: controller in dubious state, performing PORT_RST
[10581.307818] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10581.311119] ata1.00: configured for UDMA/66
[10581.313168] ata1: EH complete
[10581.450700] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10581.452739] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10581.454797] ata1.00: failed command: READ DMA
[10581.456811] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10581.460858] ata1.00: status: { Busy }
[10581.462922] ata1: hard resetting link
[10581.464926] ata1: controller in dubious state, performing PORT_RST
[10583.655637] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10583.658911] ata1.00: configured for UDMA/66
[10583.660997] ata1: EH complete
[10583.794492] ata1.00: limiting speed to UDMA/33:PIO4
[10583.796511] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10583.798564] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10583.800583] ata1.00: failed command: READ DMA
[10583.802618] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10583.806679] ata1.00: status: { Busy }
[10583.809058] ata1: hard resetting link
[10583.811090] ata1: controller in dubious state, performing PORT_RST
[10585.999405] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10586.002714] ata1.00: configured for UDMA/33
[10586.004761] ata1: EH complete
[10586.142263] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10586.144308] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10586.146368] ata1.00: failed command: READ DMA
[10586.148404] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10586.152495] ata1.00: status: { Busy }
[10586.154561] ata1: hard resetting link
[10586.156566] ata1: controller in dubious state, performing PORT_RST
[10588.347248] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10588.350519] ata1.00: configured for UDMA/33
[10588.352550] ata1: EH complete
[10588.494107] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[10588.496144] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data
[10588.498202] ata1.00: failed command: READ DMA
[10588.500218] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in
                        res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error)
[10588.504272] ata1.00: status: { Busy }
[10588.506335] ata1: hard resetting link
[10588.508342] ata1: controller in dubious state, performing PORT_RST
[10590.699055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[10590.702324] ata1.00: configured for UDMA/33
[10590.704363] sd 0:0:0:0: [sdj] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10590.706425] sd 0:0:0:0: [sdj] tag#0 Sense Key : Aborted Command [current] 
[10590.708464] sd 0:0:0:0: [sdj] tag#0 Add. Sense: Scsi parity error
[10590.710512] sd 0:0:0:0: [sdj] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 d3 d4 e0 00 00 01 00 00 00
[10590.712560] blk_update_request: I/O error, dev sdj, sector 13882592
[10590.714663] ata1: EH complete