32 GBYTE SWISS BIT

scsi0 : pata_altera_cf
ata1: PATA max PIO4 mmio cmd 0x8000000 ctl 0x8000038 irq 7
ata1.00: CFA: SFCF32GBH1BO4TO-I-NC-543-SMA, 110301a, max UDMA/66
ata1.00: 64028160 sectors, multi 0: LBA 
scsi 0:0:0:0: Direct-Access     ATA      SFCF32GBH1BO4TO- 1103 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 64028160 512-byte hardware sectors: (32.7 GB/30.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk


64 GBYTE SWISS BIT

/> Uncompressing Linux... Ok, booting the kernel.
Linux version 2.6.30 (janet@localhost.localdomain) (gcc version 3.4.6) #4699 PREEMPT Fri May 2 09:55:59 PDT 2014


uClinux/Nios II
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
Kernel command line: 
NR_IRQS:32
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory available: 128012k/1920k RAM, 0k/0k ROM (1177k kernel code, 743k data)
Calibrating delay loop... 49.45 BogoMIPS (lpj=247296)
Mount-cache hash table entries: 512
init_BSP(): registering device resources
bio: create slab <bio-0> at 0
SCSI subsystem initialized
io scheduler noop registered
io scheduler deadline registered (default)
ttyS0 at MMIO 0x8000060 (irq = 9) is a Altera UART
console [ttyS0] enabled
Driver 'sd' needs updating - please use bus_type methods
Freeing unused kernel memory: 504k freed (0x162000 - 0x1df000)
Shell invoked to run file: /etc/rc
Command: hostname uClinux
hostname: applet not found
Command: mount -t proc proc /proc -o noexec,nosuid,nodev
Command: mount -t sysfs sysfs /sys -o noexec,nosuid,nodev
Command: mount -t devpts devpts /dev/pts -o noexec,nosuid
Command: cd /dev
Command: mknod aim9x0 c 241 0
Command: sleep 1
scsi0 : pata_altera_cf
ata1: PATA max PIO4 mmio cmd 0x8000000 ctl 0x8000038 irq 7
irq 7: nobody cared (try booting with the "irqpoll" option)
Stack from 00343db0:<0>
       <0> 00000000<0> 00040084<0> 0015bb04<0> 0004028c<0> 0003e840<0> 00153284<0> 0000000a<0> 00000007<0>
       <0> 003408e0<0> ffffe000<0> 0015bb04<0> 00041154<0> 000000ff<0> 00343ea8<0> 0015d640<0> 00000007<0>
       <0> 000014fc<0> 00000000<0> 0015d640<0> 00000002<0> 00000a24<0> 00000001<0> 00326510<0> 00000000<0>
       <0> 3b9356f8<0> 00000000<0> 0015a540<0> 0000004c<0> 41b69800<0> 00000001<0> ffffe000<0> 00000101<0>
       <0> 00342000<0> 00342000<0> 00000001<0> 00000000<0> ffffffff<0> 00017274<0> deadbeef<0> 00343e60<0>
       <0> deadbeef<0> 00000001<0> 00000001<0> 000170f8<0> 0015a228<0> 0003e840<0> 08001854<0> 00332568<0>
Call Trace:<0>
       <0> [<000000ff>]<0> [<00000000>]<0> [<00000000>]<0> [<00017274>]<0>
       <0> [<00000001>]<0> [<000175dc>]<0> [<00001500>]<0> [<00004a38>]<0>
       <0> [<00000005>]<0> [<00000a24>]<0> [<00000001>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0> [<000000f7>]<0>
       <0> [<00000000>]<0> [<00024ec0>]<0> [<00000001>]<0> [<00000001>]<0>
       <0> [<0011fe00>]<0> [<0011fdb0>]<0> [<00024ec0>]<0> [<00000000>]<0>
       <0> [<0002a538>]<0> [<00000000>]<0> [<0002a538>]<0> [<00000001>]<0>
       <0> [<00024d04>]<0> [<00029b00>]<0> [<00001e18>]<0> [<000096cc>]<0>
       <0> [<00000b64>]<0> [<00000001>]<0> [<00029a68>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00000001>]<0> [<00000711>]<0>
       <0> [<00000711>]<0> [<00000000>]<0> [<00000000>]<0> [<00029f4c>]<0>
       <0> [<00000001>]<0> [<00000001>]<0> [<00001e08>]<0>
handlers:
[<001204c4>]
Disabling IRQ #7
Command: cat /etc/motd
Welcome to
          ____ _  _
         /  __| ||_|                 
    _   _| |  | | _ ____  _   _  _  _ 
   | | | | |  | || |  _ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |  ___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|

For further information check:
http://www.uclinux.org/

Execution Finished, Exiting

Sash command shell (version 1.1.1)
/> ata1.00: CFA: SFCF64GBH2BU4TO-I-NU-517-L28, 120504, max UDMA/133
ata1.00: 125313024 sectors, multi 0: LBA 
scsi 0:0:0:0: Direct-Access     ATA      SFCF64GBH2BU4TO- 1205 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 125313024 512-byte hardware sectors: (64.1 GB/59.7 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda:<4>ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: limiting speed to UDMA7:PIO5
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: limiting speed to PIO0
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: EH complete
INFO: task ata_aux:10 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ata_aux       D 00001e08     0    10      2
Stack from 00345c28:<0>
       <0> 00326040<0> ffffe000<0> 0015a514<0> 003261d0<0> 00000000<0> 00345cb8<0> 00000000<0> 00000000<0>
       <0> 00345c54<0> deadbeef<0> 00122ee4<0> 00000002<0> 00345d04<0> 7fffffff<0> ffffe000<0> 00345c6c<0>
       <0> 00122bf8<0> 7fffffff<0> 00345cac<0> 00123c4c<0> 00000000<0> 0040f6a8<0> 001bba80<0> 001bb988<0>
       <0> 00000001<0> ffffe000<0> 00198ebc<0> 00000000<0> 00000002<0> 00345d04<0> 7fffffff<0> ffffe000<0>
       <0> 00123308<0> 00000001<0> 00326040<0> 0000b33c<0> 00345d08<0> 00345d08<0> 00000000<0> 00326040<0>
       <0> 0000b33c<0> 00000000<0> 00000000<0> 00345d10<0> 00000000<0> 00345d04<0> 001bb988<0> 00000000<0>
Call Trace:<0>
       <0> [<00000001>]<0> [<00123430>]<0> [<00000020>]<0> [<000c7240>]<0>
       <0> [<000c703c>]<0> [<00000000>]<0> [<00000001>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00000020>]<0> [<00000010>]<0> [<00000020>]<0>
       <0> [<00000010>]<0> [<00000000>]<0> [<00000000>]<0> [<0008e390>]<0>
       <0> [<000c3868>]<0> [<00000020>]<0> [<00000010>]<0> [<000feaa0>]<0>
       <0> [<00000010>]<0> [<00000005>]<0> [<00000000>]<0> [<00000002>]<0>
       <0> [<000febb0>]<0> [<00000020>]<0> [<00000bb8>]<0> [<00000005>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<000c286c>]<0> [<00000000>]<0>
       <0> [<00000003>]<0> [<00109790>]<0> [<00000020>]<0> [<00000bb8>]<0>
       <0> [<00000005>]<0> [<00000000>]<0> [<0000109e>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00002000>]<0> [<00000000>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0>
       <0> [<00109c1c>]<0> [<00000000>]<0> [<00000bb8>]<0> [<00000005>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00000001>]<0> [<00000001>]<0> [<00000000>]<0>
       <0> [<00000001>]<0> [<000922ac>]<0> [<00000001>]<0> [<00107fc8>]<0>
       <0> [<00103834>]<0> [<00117f1c>]<0> [<00117dac>]<0> [<00024ec0>]<0>
       <0> [<00000000>]<0> [<0002a538>]<0> [<00000000>]<0> [<0002a538>]<0>
       <0> [<00000001>]<0> [<00024d04>]<0> [<00029b00>]<0> [<00001e18>]<0>
       <0> [<000096cc>]<0> [<00000b64>]<0> [<00000001>]<0> [<00029a68>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0> [<00000001>]<0>
       <0> [<00000711>]<0> [<00000711>]<0> [<00000000>]<0> [<00000000>]<0>
       <0> [<00029f4c>]<0> [<00000001>]<0> [<00000001>]<0> [<00001e08>]<0>
INFO: task async/0:23 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
async/0       D 00001e08     0    23      2
Stack from 0016dd28:<0>
       <0> 00418680<0> ffffe000<0> 0015a514<0> 00418810<0> 00000002<0> 00042c88<0> 0015ce78<0> 00167020<0>
       <0> 0016dd54<0> deadbeef<0> 00122ee4<0> 002e52c8<0> 0016ddb0<0> 00000001<0> ffffe000<0> 0016dd6c<0>
       <0> 00122bf8<0> 0015a8fc<0> 0016dd78<0> 0012394c<0> 00000000<0> 0016dda8<0> 0015ce78<0> 00042cd0<0>
       <0> 00123dd4<0> 00000000<0> 00167000<0> 00167000<0> 00310c60<0> 0016ddfc<0> 001e87c0<0> 000432e4<0>
       <0> 001e87c0<0> 00000000<0> 00000000<0> 00418680<0> 0002a57c<0> 002e52c8<0> 002e52c8<0> 001e87c0<0>
       <0> 00000000<0> 00000000<0> 00418680<0> 0002a57c<0> 0016ddbc<0> 0016ddbc<0> 0004521c<0> 00000000<0>
Call Trace:<0>
       <0> [<000aaf30>]<0> [<00000000>]<0> [<000ab0fc>]<0> [<00000001>]<0>
       <0> [<00000024>]<0> [<00000000>]<0> [<00000001>]<0> [<00000000>]<0>
       <0> [<00000001>]<0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0>
       <0> [<000aad44>]<0> [<00000000>]<0> [<00000001>]<0> [<00000002>]<0>
       <0> [<000ce098>]<0> [<00000000>]<0> [<00000000>]<0> [<00000001>]<0>
       <0> [<00000001>]<0> [<00000000>]<0> [<00091a60>]<0> [<00000000>]<0>
       <0> [<00000001>]<0> [<00000000>]<0> [<00000001>]<0> [<00091ae8>]<0>
       <0> [<000aab14>]<0> [<000c9900>]<0> [<000ca608>]<0> [<0010ae90>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00031ecc>]<0> [<00000000>]<0>
       <0> [<0000b33c>]<0> [<00000000>]<0> [<0000b33c>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00000000>]<0> [<00031d10>]<0> [<00029b00>]<0>
       <0> [<00001e18>]<0> [<000096cc>]<0> [<00000b64>]<0> [<00000001>]<0>
       <0> [<00029a68>]<0> [<00000000>]<0> [<00000000>]<0> [<00000000>]<0>
       <0> [<00000001>]<0> [<00000711>]<0> [<00000711>]<0> [<00000000>]<0>
       <0> [<00000000>]<0> [<00029f4c>]<0> [<00000001>]<0> [<00000001>]<0>
       <0> [<00001e08>]<0>
ata1: lost interrupt (Status 0x58)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
        00 00 00 00 
sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
 unable to read partition table
sd 0:0:0:0: [sda] Attached SCSI disk
ata1: EH complete
sda: detected capacity change from 0 to 64160268288
sda: detected capacity change from 0 to 64160268288
/>