Hello!

I download the 2.6.1-kernel from kernel.org. I have compilied it. At
booting it stop at the following line:
NET: Registered protocol family 20

That is all!

I have set CONFIG_BLK_DEV_IDEPCI, CONFIG_BLK_DEV_IDEDMA_PCI,
CONFIG_BLK_DEV_SIS5513 und CONFIG_EXT3_FS to yes. But it does not work.
I get no kernel panic.

Can anybody help me. Thanks.

Ausgabe lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 04)
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Eth

lilo.conf: 
image=/boot/vmlinuz-2.6.1
	#initrd=/boot/initrd-2.6.1-040124.img
	#append="apm=off hdc=ide-scsi acpi=on quiet resume2=swap:/dev/hda3 resume=/dev/hda3"
	#append="apm=off hdc=ide-scsi acpi=on pci=noacpi resume2=swap:/dev/hda3"
	append="apm=off acpi=on hdc=ide-scsi resume2=swap:/dev/hda3"
	label=2.6.1
	read-only
	root=/dev/hda2

CU        
         
  Michael  
          
--                                                       
           Michael Ott, e-mail: michael@zolnott.de, www.zolnott.de           
I am registered as user #275453 with the Linux Counter, http://counter.li.org.