From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Brahneborg Subject: 2.6.3: sata_via "abnormal status 0xD0 on port 0xC007" Date: Thu, 19 Feb 2004 21:11:25 +0100 Sender: linux-ide-owner@vger.kernel.org Message-ID: <20040219211125.A9526@nettis.grimsta> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="oyUTqETQ0mS9luUI" Return-path: Received: from 212-214-140-145.v-by.wtnord.net ([212.214.140.145]:53911 "EHLO ricercar.mine.nu") by vger.kernel.org with ESMTP id S267541AbUBSULf (ORCPT ); Thu, 19 Feb 2004 15:11:35 -0500 Content-Disposition: inline List-Id: linux-ide@vger.kernel.org To: jgarzik@pobox.com, akpm@osdl.org, linux-ide@vger.kernel.org --oyUTqETQ0mS9luUI Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I decided to make a new try with the 2.6.3 and 2.6.3-mm1 kernels with two SATA disks, on the SATA connectors on the motherboard (Abit KV7). The sata_via module loads fine and gives me two disks: sda and sdb. However, while small files work fine, I still get random data corruption on large (500MB files). With 2.6.3, the checksum of each copy is different, but same for each file. The corruption probably happens during write. With 2.6.3-mm1, the log file ends like this: Feb 19 21:11:17 fw kernel: ata1: DMA timeout, stat 0x0 Feb 19 21:11:17 fw kernel: ATA: abnormal status 0xD0 on port 0xC007 After that, the md5sum process is dead, can't be killed, and a hard reset was required. I've attached /var/log/messages, /var/log/dmesg, and the output from /proc/interrupts and "lspci -vv". I hope you can help me with this. /Basic --oyUTqETQ0mS9luUI Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=messages Feb 19 21:08:25 fw syslogd 1.4.1: restart. Feb 19 21:08:25 fw syslog: syslogd startup succeeded Feb 19 21:08:25 fw kernel: klogd 1.4.1, log source = /proc/kmsg started. Feb 19 21:08:25 fw kernel: Linux version 2.6.3-mm1 (root@fw.grimsta) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #16 Thu Feb 19 21:05:22 CET 2004 Feb 19 21:08:25 fw kernel: BIOS-provided physical RAM map: Feb 19 21:08:25 fw kernel: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) Feb 19 21:08:25 fw kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) Feb 19 21:08:25 fw kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Feb 19 21:08:25 fw kernel: BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) Feb 19 21:08:25 fw kernel: BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS) Feb 19 21:08:25 fw kernel: BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data) Feb 19 21:08:25 fw kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Feb 19 21:08:25 fw kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 19 21:08:25 fw kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Feb 19 21:08:25 fw syslog: klogd startup succeeded Feb 19 21:08:25 fw kernel: 254MB LOWMEM available. Feb 19 21:08:25 fw keytable: Loading keymap: Feb 19 21:08:25 fw kernel: found SMP MP-table at 000f5e70 Feb 19 21:08:25 fw kernel: zapping low mappings. Feb 19 21:08:25 fw kernel: On node 0 totalpages: 65264 Feb 19 21:08:25 fw kernel: DMA zone: 4096 pages, LIFO batch:1 Feb 19 21:08:25 fw keytable: ^[[60G Feb 19 21:08:25 fw kernel: Normal zone: 61168 pages, LIFO batch:14 Feb 19 21:08:25 fw keytable: Feb 19 21:08:25 fw kernel: HighMem zone: 0 pages, LIFO batch:1 Feb 19 21:08:26 fw keytable: Loading system font: Feb 19 21:08:26 fw kernel: DMI 2.2 present. Feb 19 21:08:26 fw keytable: Feb 19 21:08:26 fw kernel: ACPI: RSDP (v000 KT600 ) @ 0x000f7860 Feb 19 21:08:26 fw rc: Starting keytable: succeeded Feb 19 21:08:26 fw kernel: ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3000 Feb 19 21:08:26 fw kernel: ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3040 Feb 19 21:08:26 fw kernel: ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef7a00 Feb 19 21:08:26 fw kernel: ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 Feb 19 21:08:26 fw random: Initializing random number generator: succeeded Feb 19 21:08:26 fw kernel: ACPI: Local APIC address 0xfee00000 Feb 19 21:08:26 fw kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Feb 19 21:08:26 fw kernel: Processor #0 6:3 APIC version 16 Feb 19 21:08:26 fw kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Feb 19 21:08:26 fw kernel: Using ACPI for processor (LAPIC) configuration information Feb 19 21:08:26 fw kernel: Intel MultiProcessor Specification v1.4 Feb 19 21:08:26 fw kernel: Virtual Wire compatibility mode. Feb 19 21:08:26 fw kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Feb 19 21:08:26 fw kernel: I/O APIC #2 Version 17 at 0xFEC00000. Feb 19 21:08:27 fw mount: mount: wrong fs type, bad option, bad superblock on none, Feb 19 21:08:27 fw kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Feb 19 21:08:27 fw mount: or too many mounted file systems Feb 19 21:08:27 fw kernel: Processors: 1 Feb 19 21:08:27 fw kernel: Built 1 zonelists Feb 19 21:08:27 fw kernel: Initializing CPU#0 Feb 19 21:08:27 fw netfs: Mounting other filesystems: failed Feb 19 21:08:27 fw kernel: Kernel command line: ro root=/dev/hda3 Feb 19 21:08:27 fw kernel: PID hash table entries: 1024 (order 10: 8192 bytes) Feb 19 21:08:25 fw ifup: done. Feb 19 21:08:27 fw kernel: Detected 819.189 MHz processor. Feb 19 21:08:25 fw network: Bringing up interface eth0: succeeded Feb 19 21:08:27 fw kernel: Using tsc for high-res timesource Feb 19 21:08:28 fw kernel: Console: colour VGA+ 80x25 Feb 19 21:08:28 fw autofs: automount startup succeeded Feb 19 21:08:28 fw kernel: Memory: 254680k/261056k available (2038k kernel code, 5640k reserved, 722k data, 132k init, 0k highmem) Feb 19 21:08:28 fw kernel: Calibrating delay loop... 1609.72 BogoMIPS Feb 19 21:08:28 fw smartd[532]: smartd version 5.26 Copyright (C) 2002-3 Bruce Allen Feb 19 21:08:28 fw kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Feb 19 21:08:28 fw smartd[532]: Home page is http://smartmontools.sourceforge.net/ Feb 19 21:08:28 fw kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Feb 19 21:08:28 fw smartd[532]: Opened configuration file /etc/smartd.conf Feb 19 21:08:28 fw kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Feb 19 21:08:28 fw smartd[532]: Configuration file /etc/smartd.conf parsed. Feb 19 21:08:28 fw smartd[532]: Device: /dev/hda, opened Feb 19 21:08:28 fw smartd[532]: Device: /dev/hda, not found in smartd database. Feb 19 21:08:28 fw kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Feb 19 21:08:29 fw kernel: CPU: L2 Cache: 64K (64 bytes/line) Feb 19 21:08:29 fw smartd[532]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. Feb 19 21:08:29 fw kernel: Intel machine check architecture supported. Feb 19 21:08:29 fw smartd[532]: Device: /dev/hdi, No such device or address, open() failed Feb 19 21:08:29 fw kernel: Intel machine check reporting enabled on CPU#0. Feb 19 21:08:29 fw smartd[532]: Unable to register ATA device /dev/hdi at line 31 of file /etc/smartd.conf Feb 19 21:08:29 fw kernel: CPU: AMD Duron(tm) processor stepping 01 Feb 19 21:08:29 fw smartd[532]: Unable to register device /dev/hdi (no Directive -d removable). Exiting. Feb 19 21:08:29 fw kernel: Enabling fast FPU save and restore... done. Feb 19 21:08:29 fw kernel: Checking 'hlt' instruction... OK. Feb 19 21:08:29 fw smartd: smartd startup failed Feb 19 21:08:29 fw kernel: POSIX conformance testing by UNIFIX Feb 19 21:08:29 fw kernel: enabled ExtINT on CPU#0 Feb 19 21:08:29 fw kernel: ESR value before enabling vector: 00000000 Feb 19 21:08:29 fw kernel: ESR value after enabling vector: 00000000 Feb 19 21:08:30 fw named[543]: starting BIND 9.2.1 -u named Feb 19 21:08:30 fw kernel: ENABLING IO-APIC IRQs Feb 19 21:08:30 fw named[543]: using 1 CPU Feb 19 21:08:30 fw kernel: Setting 2 in the phys_id_present_map Feb 19 21:08:30 fw kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. Feb 19 21:08:30 fw named: named startup succeeded Feb 19 21:08:30 fw named[546]: loading configuration from '/etc/named.conf' Feb 19 21:08:31 fw named[546]: no IPv6 interfaces found Feb 19 21:08:31 fw sshd: Starting sshd: Feb 19 21:08:31 fw named[546]: listening on IPv4 interface lo, 127.0.0.1#53 Feb 19 21:08:31 fw sshd: succeeded Feb 19 21:08:31 fw kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 Feb 19 21:08:31 fw named[546]: listening on IPv4 interface eth0, 192.168.50.59#53 Feb 19 21:08:31 fw sshd: ^[[60G Feb 19 21:08:32 fw named[546]: command channel listening on 127.0.0.1#953 Feb 19 21:08:32 fw sshd: Feb 19 21:08:32 fw rc: Starting sshd: succeeded Feb 19 21:08:32 fw named[546]: zone 0.0.127.in-addr.arpa/IN: loaded serial 1997022700 Feb 19 21:08:32 fw kernel: testing the IO APIC....................... Feb 19 21:08:32 fw named[546]: zone localhost/IN: loaded serial 42 Feb 19 21:08:32 fw named[546]: running Feb 19 21:08:33 fw kernel: .................................... done. Feb 19 21:08:33 fw kernel: Using local APIC timer interrupts. Feb 19 21:08:33 fw kernel: calibrating APIC timer ... Feb 19 21:08:33 fw kernel: ..... CPU clock speed is 819.0133 MHz. Feb 19 21:08:33 fw kernel: ..... host bus clock speed is 204.0783 MHz. Feb 19 21:08:33 fw kernel: NET: Registered protocol family 16 Feb 19 21:08:33 fw kernel: PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1 Feb 19 21:08:33 fw kernel: PCI: Using configuration type 1 Feb 19 21:08:33 fw kernel: PCI: Probing PCI hardware Feb 19 21:08:33 fw kernel: PCI: Probing PCI hardware (bus 00) Feb 19 21:08:33 fw kernel: PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 Feb 19 21:08:33 fw kernel: PCI->APIC IRQ transform: (B0,I12,P0) -> 19 Feb 19 21:08:33 fw kernel: PCI->APIC IRQ transform: (B0,I15,P1) -> 20 Feb 19 21:08:33 fw kernel: PCI->APIC IRQ transform: (B0,I15,P0) -> 20 Feb 19 21:08:33 fw kernel: PCI->APIC IRQ transform: (B0,I18,P0) -> 23 Feb 19 21:08:33 fw kernel: Machine check exception polling timer started. Feb 19 21:08:33 fw kernel: SGI XFS with ACLs, no debug enabled Feb 19 21:08:33 fw kernel: Real Time Clock Driver v1.12 Feb 19 21:08:33 fw kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Feb 19 21:08:33 fw kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 19 21:08:33 fw kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1 Feb 19 21:08:33 fw kernel: VP_IDE: chipset revision 6 Feb 19 21:08:33 fw kernel: VP_IDE: not 100%% native mode: will probe irqs later Feb 19 21:08:33 fw kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 19 21:08:34 fw kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 Feb 19 21:08:34 fw kernel: ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio Feb 19 21:08:34 fw kernel: ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA Feb 19 21:08:34 fw kernel: hda: FUJITSU MHM2060AT, ATA DISK drive Feb 19 21:08:34 fw kernel: Using anticipatory io scheduler Feb 19 21:08:34 fw xinetd[576]: pmap_set failed. service=sgi_fam program=391002 version=2 Feb 19 21:08:34 fw kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 19 21:08:34 fw kernel: hdd: MATSHITA CD-RW CW-7586, ATAPI CD/DVD-ROM drive Feb 19 21:08:34 fw kernel: ide1 at 0x170-0x177,0x376 on irq 15 Feb 19 21:08:34 fw kernel: hda: max request size: 128KiB Feb 19 21:08:34 fw kernel: hda: 11733120 sectors (6007 MB) w/2048KiB Cache, CHS=12416/15/63, UDMA(66) Feb 19 21:08:34 fw kernel: hda: hda1 hda2 hda3 Feb 19 21:08:34 fw kernel: hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Feb 19 21:08:34 fw kernel: Uniform CD-ROM driver Revision: 3.20 Feb 19 21:08:34 fw kernel: mice: PS/2 mouse device common for all mice Feb 19 21:08:34 fw kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 19 21:08:34 fw kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 19 21:08:34 fw kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Feb 19 21:08:34 fw kernel: md: raid1 personality registered as nr 3 Feb 19 21:08:34 fw kernel: md: raid5 personality registered as nr 4 Feb 19 21:08:34 fw kernel: raid5: measuring checksumming speed Feb 19 21:08:34 fw kernel: 8regs : 1100.000 MB/sec Feb 19 21:08:34 fw kernel: 8regs_prefetch: 1036.000 MB/sec Feb 19 21:08:34 fw kernel: 32regs : 860.000 MB/sec Feb 19 21:08:34 fw kernel: 32regs_prefetch: 824.000 MB/sec Feb 19 21:08:34 fw kernel: pII_mmx : 2188.000 MB/sec Feb 19 21:08:34 fw kernel: p5_mmx : 2924.000 MB/sec Feb 19 21:08:34 fw kernel: raid5: using function: p5_mmx (2924.000 MB/sec) Feb 19 21:08:34 fw kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Feb 19 21:08:34 fw kernel: device-mapper: 4.0.0-ioctl (2003-06-04) initialised: dm@uk.sistina.com Feb 19 21:08:34 fw kernel: NET: Registered protocol family 2 Feb 19 21:08:34 fw kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Feb 19 21:08:34 fw kernel: TCP: Hash tables configured (established 8192 bind 16384) Feb 19 21:08:34 fw kernel: NET: Registered protocol family 1 Feb 19 21:08:34 fw kernel: NET: Registered protocol family 17 Feb 19 21:08:34 fw kernel: md: Autodetecting RAID arrays. Feb 19 21:08:34 fw kernel: md: autorun ... Feb 19 21:08:34 fw kernel: md: ... autorun DONE. Feb 19 21:08:34 fw kernel: kjournald starting. Commit interval 5 seconds Feb 19 21:08:34 fw kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 19 21:08:34 fw kernel: VFS: Mounted root (ext3 filesystem) readonly. Feb 19 21:08:34 fw kernel: Freeing unused kernel memory: 132k freed Feb 19 21:08:34 fw kernel: drivers/usb/core/usb.c: registered new driver hub Feb 19 21:08:34 fw kernel: EXT3 FS on hda3, internal journal Feb 19 21:08:34 fw kernel: Adding 522104k swap on /dev/hda2. Priority:-1 extents:1 Feb 19 21:08:34 fw kernel: kjournald starting. Commit interval 5 seconds Feb 19 21:08:34 fw kernel: EXT3 FS on hda1, internal journal Feb 19 21:08:34 fw kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 19 21:08:34 fw kernel: blk: queue c1313400, I/O limit 4095Mb (mask 0xffffffff) Feb 19 21:08:34 fw kernel: via-rhine.c:v1.10-LK1.1.19-2.5 July-12-2003 Written by Donald Becker Feb 19 21:08:34 fw kernel: http://www.scyld.com/network/via-rhine.html Feb 19 21:08:34 fw kernel: eth0: VIA VT6102 Rhine-II at 0xec00, 00:50:8d:4f:f5:f7, IRQ 23. Feb 19 21:08:34 fw kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Feb 19 21:08:35 fw kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. Feb 19 21:08:35 fw kernel: process `named' is using obsolete setsockopt SO_BSDCOMPAT Feb 19 21:08:35 fw xinetd[576]: xinetd Version 2.3.7 started with libwrap options compiled in. Feb 19 21:08:35 fw xinetd[576]: Started working: 0 available services Feb 19 21:08:35 fw xinetd: xinetd startup succeeded Feb 19 21:08:36 fw crond: crond startup succeeded Feb 19 21:08:37 fw smb: smbd startup succeeded Feb 19 21:08:37 fw smb: nmbd startup succeeded Feb 19 21:08:38 fw anacron: anacron startup succeeded Feb 19 21:08:38 fw atd: atd startup succeeded Feb 19 21:08:38 fw rc: Starting mdmonitor: succeeded Feb 19 21:08:38 fw kernel: warning: process `update' used the obsolete bdflush system call Feb 19 21:08:38 fw kernel: Fix your initscripts? Feb 19 21:08:43 fw kernel: warning: process `update' used the obsolete bdflush system call Feb 19 21:08:43 fw kernel: Fix your initscripts? Feb 19 21:09:02 fw sshd(pam_unix)[646]: session opened for user basic by (uid=500) Feb 19 21:09:17 fw su(pam_unix)[663]: session opened for user root by basic(uid=500) Feb 19 21:09:20 fw kernel: SCSI subsystem initialized Feb 19 21:09:35 fw kernel: ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 20 Feb 19 21:09:35 fw kernel: ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 20 Feb 19 21:09:36 fw kernel: ata1: dev 0 ATA, max UDMA7, 312581808 sectors (lba48) Feb 19 21:09:36 fw kernel: ata1: dev 0 configured for UDMA/133 Feb 19 21:09:36 fw kernel: scsi0 : sata_via Feb 19 21:09:36 fw kernel: ata2: dev 0 ATA, max UDMA7, 312581808 sectors (lba48) Feb 19 21:09:36 fw kernel: ata2: dev 0 configured for UDMA/133 Feb 19 21:09:36 fw kernel: scsi1 : sata_via Feb 19 21:09:36 fw kernel: Vendor: ATA Model: SAMSUNG SP1614C Rev: 1.00 Feb 19 21:09:36 fw kernel: Type: Direct-Access ANSI SCSI revision: 05 Feb 19 21:09:36 fw kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) Feb 19 21:09:36 fw kernel: SCSI device sda: drive cache: write through Feb 19 21:09:36 fw kernel: sda: sda1 sda2 sda3 sda4 Feb 19 21:09:36 fw kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Feb 19 21:09:36 fw kernel: Vendor: ATA Model: SAMSUNG SP1614C Rev: 1.00 Feb 19 21:09:36 fw kernel: Type: Direct-Access ANSI SCSI revision: 05 Feb 19 21:09:36 fw kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) Feb 19 21:09:36 fw kernel: SCSI device sdb: drive cache: write through Feb 19 21:09:36 fw kernel: sdb: sdb1 sdb2 Feb 19 21:09:36 fw kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Feb 19 21:09:59 fw kernel: XFS mounting filesystem sda1 Feb 19 21:11:17 fw kernel: ata1: DMA timeout, stat 0x0 Feb 19 21:11:17 fw kernel: ATA: abnormal status 0xD0 on port 0xC007 --oyUTqETQ0mS9luUI Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Linux version 2.6.3-mm1 (root@fw.grimsta) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #16 Thu Feb 19 21:05:22 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS) BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 254MB LOWMEM available. found SMP MP-table at 000f5e70 zapping low mappings. On node 0 totalpages: 65264 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61168 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 KT600 ) @ 0x000f7860 ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3000 ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3040 ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef7a00 ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Built 1 zonelists Initializing CPU#0 Kernel command line: ro root=/dev/hda3 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 819.689 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 254680k/261056k available (2038k kernel code, 5640k reserved, 722k data, 132k init, 0k highmem) Calibrating delay loop... 1609.72 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Duron(tm) processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-12, 2-16, 2-17, 2-18, 2-21, 2-22 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 001 01 1 1 0 1 0 1 1 91 14 001 01 1 1 0 1 0 1 1 99 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 A1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 819.0133 MHz. ..... host bus clock speed is 204.0783 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 PCI->APIC IRQ transform: (B0,I12,P0) -> 19 PCI->APIC IRQ transform: (B0,I15,P1) -> 20 PCI->APIC IRQ transform: (B0,I15,P0) -> 20 PCI->APIC IRQ transform: (B0,I18,P0) -> 23 Machine check exception polling timer started. SGI XFS with ACLs, no debug enabled Real Time Clock Driver v1.12 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA hda: FUJITSU MHM2060AT, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdd: MATSHITA CD-RW CW-7586, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 11733120 sectors (6007 MB) w/2048KiB Cache, CHS=12416/15/63, UDMA(66) hda: hda1 hda2 hda3 hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 1100.000 MB/sec 8regs_prefetch: 1036.000 MB/sec 32regs : 856.000 MB/sec 32regs_prefetch: 824.000 MB/sec pII_mmx : 2184.000 MB/sec p5_mmx : 2924.000 MB/sec raid5: using function: p5_mmx (2924.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.0.0-ioctl (2003-06-04) initialised: dm@uk.sistina.com NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed drivers/usb/core/usb.c: registered new driver hub EXT3 FS on hda3, internal journal Adding 522104k swap on /dev/hda2. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. blk: queue c1313400, I/O limit 4095Mb (mask 0xffffffff) --oyUTqETQ0mS9luUI Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=lspci-vv 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189 (rev 80) Subsystem: ABIT Computer Corp.: Unknown device 1408 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b198 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0c.0 VGA compatible controller: S3 Inc. 86c968 [Vision 968 VRAM] rev 0 (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] 00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80) Subsystem: ABIT Computer Corp.: Unknown device 1408 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-