Linux ATA/IDE development
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
To: "François Chenais" <francois@chenais.net>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: kernel 2.6.3 hdparm : HDIO_SET_DMA failed: Operation not permitted
Date: Fri, 5 Mar 2004 18:26:16 +0100	[thread overview]
Message-ID: <200403051826.16650.bzolnier@elka.pw.edu.pl> (raw)
In-Reply-To: <1078506007.2210.84.camel@tanna>

On Friday 05 of March 2004 18:00, François Chenais wrote:
> Hello,

Hi,

> Since I use kernel 2.6.3, my disk has very low performance
> If I do nothing during about 30 sec, the system takes about 3 sec before
> reaction because the disk seems awakened.
>
> So I asked around me how to tune it using hdparm but
> i have the following errors when setting on dma (logs bellow).
>
> Some persons around me have the same feeling of lowest performances.
>
>
> Perhaps my kernel .config has some bad values because I have no
> experience in disk tuning (see attached file).
>
> I use
>    - debian sid on a NEC VERSA L320 laptop with a 'home built' kernel.
>    - preemptive mode
>    - ACPI

CONFIG_BLK_DEV_PIIX is not set in your .config and due to the fact
that NEC VERSA L320 has Intel IDE chipset you need to set it to 'y'.

Regards,
Bartlomiej


  reply	other threads:[~2004-03-05 17:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-03-05 17:00 kernel 2.6.3 hdparm : HDIO_SET_DMA failed: Operation not permitted François Chenais
2004-03-05 17:26 ` Bartlomiej Zolnierkiewicz [this message]
2004-03-08 11:37   ` François Chenais

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200403051826.16650.bzolnier@elka.pw.edu.pl \
    --to=b.zolnierkiewicz@elka.pw.edu.pl \
    --cc=francois@chenais.net \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox