From: "Chris Rankin" <rankincj@yahoo.com>
To: linux-ide@vger.kernel.org
Cc: meelis.roos@cyber.ee, patrick@dreker.de
Subject: RE: IDE Timeout problem on Intel PIIX3 (Triton 2) chipset
Date: Mon, 28 Jun 2004 21:27:59 +0100 (BST) [thread overview]
Message-ID: <20040628202759.6202.qmail@web52909.mail.yahoo.com> (raw)
> Any kernel above and including 2.4.21 (including
> 2.6.5 and 2.6.7, others not tested) produces the
> following errors quite often (once or twice per
> minute, with the corresponding delay) and the
> harddisk drops out of DMA.
Linux 2.4.26-UP is fine for me here, for both hda and
hdb. This box has 64 MB RAM, amd the kernel is
compiled with gcc-3.2.3.
# lspci
00:00.0 Host bridge: Intel Corp. 430VX - 82437VX TVX
[Triton VX] (rev 02)
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA
[Natoma/Triton II] (rev 01)
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE
[Natoma/Triton II]
00:07.2 USB Controller: Intel Corp. 82371SB PIIX3 USB
[Natoma/Triton II] (rev 01)
00:08.0 VGA compatible controller: ATI Technologies
Inc 3D Rage I/II 215GT [Mach64 GT] (rev 41)
00:0d.0 VGA compatible controller: Matrox Graphics,
Inc. MGA 2164W [Millennium II]
00:0e.0 PCI bridge: Digital Equipment Corporation
DECchip 21152 (rev 03)
00:0f.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 08)
01:04.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 05)
01:05.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 05)
# cat /proc/ide/hda/settings
name value min
max mode
---- ----- ---
--- ----
acoustic 0 0
254 rw
address 0 0
2 rw
bios_cyl 787 0
65535 rw
bios_head 128 0
255 rw
bios_sect 63 0
63 rw
breada_readahead 8 0
255 rw
bswap 0 0
1 r
current_speed 34 0
70 rw
failures 0 0
65535 rw
file_readahead 124 0
16384 rw
init_speed 34 0
70 rw
io_32bit 3 0
3 rw
keepsettings 0 0
1 rw
lun 0 0
7 rw
max_failures 1 0
65535 rw
max_kb_per_request 128 1
255 rw
multcount 16 0
16 rw
nice1 1 0
1 rw
nowerr 0 0
1 rw
number 0 0
3 rw
pio_mode write-only 0
255 w
slow 0 0
1 rw
unmaskirq 1 0
1 rw
using_dma 1 0
1 rw
wcache 0 0
1 rw
# cat /proc/ide/hdb/settings
name value min
max mode
---- ----- ---
--- ----
acoustic 0 0
254 rw
address 0 0
2 rw
bios_cyl 667 0
65535 rw
bios_head 240 0
255 rw
bios_sect 63 0
63 rw
breada_readahead 8 0
255 rw
bswap 0 0
1 r
current_speed 0 0
70 rw
failures 0 0
65535 rw
file_readahead 124 0
16384 rw
init_speed 0 0
70 rw
io_32bit 3 0
3 rw
keepsettings 0 0
1 rw
lun 0 0
7 rw
max_failures 1 0
65535 rw
max_kb_per_request 128 1
255 rw
multcount 16 0
16 rw
nice1 1 0
1 rw
nowerr 0 0
1 rw
number 1 0
3 rw
pio_mode write-only 0
255 w
slow 0 0
1 rw
unmaskirq 1 0
1 rw
using_dma 1 0
1 rw
wcache 0 0
1 rw
# uptime
21:21:38 up 75 days, 1 min, 5 users, load average:
0.00, 0.00, 0.00
Uniform Multi-Platform E-IDE driver Revision:
7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
PIIX3: IDE controller at PCI slot 00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xefa0-0xefa7, BIOS settings:
hda:pio, hdb:pio
ide1: BM-DMA at 0xefa8-0xefaf, BIOS settings:
hdc:pio, hdd:pio
hda: WDC AC33200L, ATA DISK drive
hdb: WDC AC35100L, ATA DISK drive
blk: queue c02b5080, I/O limit 4095Mb (mask
0xffffffff)
blk: queue c02b51bc, I/O limit 4095Mb (mask
0xffffffff)
hdc: TOSHIBA CD-ROM XM-6002B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError
}
hda: 6346368 sectors (3249 MB) w/256KiB Cache,
CHS=787/128/63, DMA
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError
}
hdb: host protected area => 1
hdb: 10085040 sectors (5164 MB) w/256KiB Cache,
CHS=667/240/63, (U)DMA
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 hdb2 hdb3 hdb4
# cat /proc/interrupts
CPU0
0: 648044291 XT-PIC timer
1: 6916 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 27998 XT-PIC serial
9: 385 XT-PIC usb-uhci
10: 13465208 XT-PIC eth2, eth0
11: 604729 XT-PIC eth1
14: 4091193 XT-PIC ide0
15: 36 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
Cheers,
Chris
___________________________________________________________ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself http://uk.messenger.yahoo.com
next reply other threads:[~2004-06-29 1:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-28 20:27 Chris Rankin [this message]
2004-06-29 1:21 ` IDE Timeout problem on Intel PIIX3 (Triton 2) chipset Patrick Dreker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040628202759.6202.qmail@web52909.mail.yahoo.com \
--to=rankincj@yahoo.com \
--cc=linux-ide@vger.kernel.org \
--cc=meelis.roos@cyber.ee \
--cc=patrick@dreker.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).