From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nicola Subject: SiS 180 pata Date: Mon, 5 Jul 2004 12:53:47 +0200 Sender: linux-ide-owner@vger.kernel.org Message-ID: <200407051253.47003.ivololeribar@yahoo.it> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp001.mail.ukl.yahoo.com ([217.12.11.32]:10427 "HELO smtp001.mail.ukl.yahoo.com") by vger.kernel.org with SMTP id S266017AbUGEKxm (ORCPT ); Mon, 5 Jul 2004 06:53:42 -0400 Content-Disposition: inline List-Id: linux-ide@vger.kernel.org To: uwe.koziolek@gmx.net Cc: linux-ide@vger.kernel.org Dear Sirs, I have a problem with my SiS 180 controller sata/pata, running under Fedora Core 2 x86_64, with both kernels 2.6.5 and 2.6.6. I own a brand new mb for my AMD3200+, Jetway S755max with a Sis chipset 755, southbridge 963 + Sis 180. The supplementary Sis 180 chipset controls another parallel ata port (2 channels) and two sata ports. I'm not interested in sata ports for the time being. I would like to use my Pioneer dvd recorder on the third parallel ide, controlled by the sis 180 chipset. It is recognised from the bios and it works under xp, so it has to be a software isse. (the same happens if I attach a 40G drive). However the drive is not detected by linux: libata version 1.02 loaded. ata1: SATA max UDMA/133 cmd 0xD800 ctl 0xDC02 bmdma 0xE800 irq 19 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xE402 bmdma 0xE808 irq 19 ata1: no device found (phy stat 00000000) scsi1 : sata_sis ata2: no device found (phy stat 00000000) scsi2 : sata_sis I have tried to mount it under every possible hd device, as well as sd one. I have also read /usr/src/linux/Documentation/ide.txt and tried with various ide2=... combinations at boot time, without success. Now I'm quite confused. Does the sata_sis module covers only the sata side of the sis 180 chipset? I would highly appreciate any help you could give me. I really need this interface working. Thanks a lot in advance Nicola