From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Morton Subject: Re: linux 2.6.9 controller order reordered. was: [Re: linux 2.6.9 still having network code problems] Date: Tue, 2 Nov 2004 02:26:04 -0800 Message-ID: <20041102022604.262058c4.akpm@osdl.org> References: <418741EB.3080701@outblaze.com> <20041102011918.2b453e21.akpm@osdl.org> <4187478A.1040002@outblaze.com> <20041102014119.1a6096cc.akpm@osdl.org> <41874D93.9000008@outblaze.com> <20041102020712.18218d47.akpm@osdl.org> <418751B3.8090003@outblaze.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from fw.osdl.org ([65.172.181.6]:35271 "EHLO mail.osdl.org") by vger.kernel.org with ESMTP id S261932AbUKBJ1z (ORCPT ); Tue, 2 Nov 2004 04:27:55 -0500 In-Reply-To: <418751B3.8090003@outblaze.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Christopher Chan Cc: linux-ide@vger.kernel.org, Alan Cox Christopher Chan wrote: > > >>Hardware: Tyan mb with Serverworks chipset and onboard Promise controller. > >> The two disks on promise channel since Serverworks does not support ATA100 > >> > >>FC2 Installation will recognise the disks as hde and hdg > >>fstab is accordingly setup as so for swap (everything else are md) > >> > >>Changing to a 2.6.9 kernel that has the promise driver compiled in will > >>change the disks to hda and hdc. > > > > > > Could you send the dmesg output so we can see the probing activity? > > > > With FC2 2.6.8-1.521smp > > ~~~~~~~~~~~~~~~~~~~~~~~~ > Oct 14 11:34:50 spf5-3 kernel: RAMDISK driver initialized: 16 RAM disks > of 16384K size 1024 blocksize > Oct 14 11:34:50 spf5-3 kernel: Uniform Multi-Platform E-IDE driver > Revision: 7.00alpha2 > Oct 14 11:34:50 spf5-3 kernel: ide: Assuming 33MHz system bus speed for > PIO modes; override with idebus=xx > Oct 14 11:34:50 spf5-3 nfslock: rpc.statd startup succeeded > Oct 14 11:34:50 spf5-3 kernel: PDC20267: IDE controller at PCI slot > 0000:00:03.0 > Oct 14 11:34:50 spf5-3 kernel: PDC20267: chipset revision 2 > Oct 14 11:34:50 spf5-3 kernel: PDC20267: ROM enabled at 0xfead0000 > Oct 14 11:34:50 spf5-3 kernel: PDC20267: 100%% native mode on irq 161 > Oct 14 11:34:50 spf5-3 kernel: PDC20267: (U)DMA Burst Bit ENABLED > Primary MASTER Mode Secondary MASTER Mode. > Oct 14 11:34:50 spf5-3 kernel: ide2: BM-DMA at 0xdf00-0xdf07, BIOS > settings: hde:pio, hdf:pio > Oct 14 11:34:50 spf5-3 kernel: ide3: BM-DMA at 0xdf08-0xdf0f, BIOS > settings: hdg:pio, hdh:pio > Oct 14 11:34:50 spf5-3 kernel: hde: Maxtor 5T040H4, ATA DISK drive > Oct 14 11:34:50 spf5-3 kernel: Using deadline io scheduler > Oct 14 11:34:50 spf5-3 kernel: ide2 at 0xdfe0-0xdfe7,0xdfae on irq 161 > Oct 14 11:34:50 spf5-3 kernel: hdg: Maxtor 5T040H4, ATA DISK drive > Oct 14 11:34:50 spf5-3 kernel: ide3 at 0xdfa0-0xdfa7,0xdfaa on irq 161 > Oct 14 11:34:50 spf5-3 kernel: SvrWks OSB4: IDE controller at PCI slot > 0000:00:0f.1 > Oct 14 11:34:50 spf5-3 kernel: PCI: Enabling device 0000:00:0f.1 (0000 > -> 0001) > Oct 14 11:34:50 spf5-3 kernel: SvrWks OSB4: chipset revision 0 > Oct 14 11:34:50 spf5-3 kernel: SvrWks OSB4: not 100%% native mode: will > probe irqs later > Oct 14 11:34:50 spf5-3 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS > settings: hda:pio, hdb:pio > Oct 14 11:34:50 spf5-3 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS > settings: hdc:pio, hdd:pio > Oct 14 11:34:50 spf5-3 kernel: hde: max request size: 128KiB > Oct 14 11:34:50 spf5-3 kernel: hde: 80043264 sectors (40982 MB) > w/2048KiB Cache, CHS=65535/16/63, UDMA(100) > Oct 14 11:34:50 spf5-3 kernel: hde: hde1 hde2 hde3 hde4 < hde5 > > Oct 14 11:34:50 spf5-3 kernel: hdg: max request size: 128KiB > Oct 14 11:34:50 spf5-3 kernel: hdg: 80043264 sectors (40982 MB) > w/2048KiB Cache, CHS=65535/16/63, UDMA(100) > Oct 14 11:34:50 spf5-3 kernel: hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > With 2.6.9 > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Using deadline io scheduler > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Compaq SMART2 Driver (v 2.6.0) > HP CISS Driver (v 2.6.2) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PDC20267: IDE controller at PCI slot 0000:00:03.0 > PDC20267: chipset revision 2 > PDC20267: ROM enabled at 0xfead0000 > PDC20267: 100% native mode on irq 31 > PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER > Mode. > ide0: BM-DMA at 0xdf00-0xdf07, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: Maxtor 5T040H4, ATA DISK drive > ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31 > Probing IDE interface ide1... > hdc: Maxtor 5T040H4, ATA DISK drive > ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31 > SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 > PCI: Enabling device 0000:00:0f.1 (0000 -> 0001) > SvrWks OSB4: chipset revision 0 > SvrWks OSB4: not 100% native mode: will probe irqs later > ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:pio, hdf:pio > ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:pio, hdh:pio > Probing IDE interface ide2... > Probing IDE interface ide3... > Probing IDE interface ide2... > Probing IDE interface ide3... > Probing IDE interface ide4... > ide4: Wait for ready failed before probe ! > Probing IDE interface ide5... > ide5: Wait for ready failed before probe ! > hda: max request size: 128KiB > hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) > hda: cache flushes not supported > hda: hda1 hda2 hda3 hda4 < hda5 > > hdc: max request size: 128KiB > hdc: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) > hdc: cache flushes not supported > hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Well the problem is that "Wait for ready" thing. Was that an alanism?