From: Oliver Bausinger <bausi@bausi.org>
To: linux-ide@vger.kernel.org
Cc: Gerald Hopf <gerald.hopf@nv-systems.net>
Subject: siimage annoyance (was: ata_sil problems (lockup at boottime))
Date: Sun, 5 Dec 2004 15:15:34 +0100 [thread overview]
Message-ID: <200412051515.34666.bausi@bausi.org> (raw)
In-Reply-To: <200412050908.33124.bausi@bausi.org>
Replying to myself after more experimentation:
> [The other possible thing to do is to use the siimage driver in
> drivers/ide, but this one stopped working with 2.6.8 and further. The
> siimage driver works quite good with 2.6.7, so this is another proof for no
> hardware problems]
>
Ok, support for the deprected siimage driver has to be explicitly enabled
unter drivers/ide (CONFIG_BLK_DEV_IDE_SATA). Then it recognizes the chipset
and seems to work so far.
The only annoyance is that the driver hangs for some seconds probing the
second port (which is unused):
SiI3112 Serial ATA: IDE controller at PCI slot 0000:00:0a.0
PCI: Found IRQ 5 for device 0000:00:0a.0
SiI3112 Serial ATA: chipset revision 1
SiI3112 Serial ATA: 100% native mode on irq 5
ide2: MMIO-DMA , BIOS settings: hde:DMA, hdf:DMA
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: SAMSUNG SP1614C, ATA DISK drive
ide2 at 0xd0800080-0xd0800087,0xd080008a on irq 5
Probing IDE interface ide3...
hdg: no response (status = 0xfe)
But one can live with that.
Greetings
Bausi
next prev parent reply other threads:[~2004-12-05 14:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-04 23:34 sata_sil problems (lockup at boottime) Gerald Hopf
2004-12-05 8:08 ` Oliver Bausinger
2004-12-05 14:15 ` Oliver Bausinger [this message]
2004-12-05 16:10 ` Bartlomiej Zolnierkiewicz
2004-12-05 16:38 ` Oliver Bausinger
2004-12-06 22:16 ` Gerald Hopf
2004-12-07 8:40 ` Oliver Bausinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200412051515.34666.bausi@bausi.org \
--to=bausi@bausi.org \
--cc=gerald.hopf@nv-systems.net \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).