From: "Oskar Liljeblad" <oskar@osk.mine.nu>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: clock drift with two Promise Ultra133 TX2 (PDC 20269) cards
Date: Mon, 2 May 2005 21:28:43 +0200 [thread overview]
Message-ID: <20050502192843.GA3367@oskar> (raw)
I'm running 2.6.11.8 on an server with two Promise Ultra133 TX2 (PDC20269)
PCI cards, same hardware revision (judging from stickers on the cards).
I'm using the CONFIG_BLK_DEV_PDC202XX_NEW driver.
Each card has two connected hard drives. Whenever I read from a disk
on one of the cards (e.g. using 'dd if=/dev/hdX of=/dev/null bs=1M'), and
at the same time read from a disk on the other card, there is heavy
software clock drift. It drifts about 2-5 seconds per minute.
This does not happen if I read from two drives connected on the same
card, or if I read from a drive connected to the motherboard IDE
(VIA vt8233a) and a drive on either of the Promise cards.
Oskar Liljeblad (oskar@osk.mine.nu)
next reply other threads:[~2005-05-02 19:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-02 19:28 Oskar Liljeblad [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-05-03 14:18 clock drift with two Promise Ultra133 TX2 (PDC 20269) cards Drew Winstel
2005-05-03 14:40 ` Oskar Liljeblad
2005-05-03 15:13 Drew Winstel
2005-05-03 16:02 ` Oskar Liljeblad
2005-05-03 16:07 Drew Winstel
2005-05-03 17:28 ` Oskar Liljeblad
2005-05-04 17:59 ` Bill Davidsen
2005-05-03 18:29 Drew Winstel
2005-05-04 20:10 ` Oskar Liljeblad
2005-05-05 14:45 Drew Winstel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050502192843.GA3367@oskar \
--to=oskar@osk.mine.nu \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).