From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Subject: Re: CSB5 IDE does not fully support native mode??
Date: Thu, 26 May 2005 10:55:38 -0600
Message-ID: <200505261055.38137.bjorn.helgaas@hp.com>
References: <200505242026.DJT32107@ms3.netsolmail.com> <1117117463.5743.149.camel@localhost.localdomain>
Mime-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Return-path: <linux-ide-owner@vger.kernel.org>
Received: from atlrel9.hp.com ([156.153.255.214]:10145 "EHLO atlrel9.hp.com")
	by vger.kernel.org with ESMTP id S261604AbVEZQzu (ORCPT
	<rfc822;linux-ide@vger.kernel.org>); Thu, 26 May 2005 12:55:50 -0400
In-Reply-To: <1117117463.5743.149.camel@localhost.localdomain>
Content-Disposition: inline
Sender: linux-ide-owner@vger.kernel.org
List-Id: linux-ide@vger.kernel.org
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: evt@texelsoft.com, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-ide@vger.kernel.org

On Thursday 26 May 2005 8:24 am, Alan Cox wrote:
> In order to keep the legacy world from falling to bits IDE and VGA have
> some ugly hacks in the PCI spec.
> 
> In legacy mode an IDE device appears at the "old" standard IDE addresses
> and uses an external IRQ pin wired to the ISA IRQ lines (14 or 15). In 
> native mode it behaves like a PCI device, honouring the PCI bars and
> using the PCI INT lines.

This has been niggling in my mind for a while -- in legacy mode,
the device should use IRQ 14/15.  But I think we still call
pci_enable_device(), which sets up IRQ routing according to
the usual PCI rules.  Should we be using pci_enable_device()
at all in legacy mode?