Re: [SATA] command 0x35 timeout errors on 2.6.13.1

[Prashant Alves <prashant.alves@gmail.com>]

Sorry wrong subject line, corrected to 2.6.13.1

On 11 September 2005 pm 13:35, Prashant Alves wrote:
> Hi Jeff,
>
> With a linux-2.6.13.1 kernel my machine freezes and I get the following
> error strings on my console:
> ata1: command 0x35 timeout,  stat 0x50 host_stat 0x4
> ata 2: command 0x35 timeout,  stat 0x50 host_stat 0x4
>
> The only option after this is to reset the machine using the reset button.
> linux-2.6.12.5 works fine for me as was linux-2.6.9 before that.
>
> This problems seem similar to the one mentioned here
> http://www.ussg.iu.edu/hypermail/linux/kernel/0506.0/1494.html
>
> Machine:
> AMD-64, Nvidia nforce3 based motherboard. 2 Seagate SATA HDDs. (250GB and
> 200GB)
>
> Disk From 2.6.12.5 dmesg:
>
> [   26.132398] scsi1 : sata_nv
> [   26.132469]   Vendor: ATA       Model: ST3200822AS       Rev: 3.01
> [   26.132641]   Type:   Direct-Access                      ANSI SCSI
> revision: 05
> [   26.132982]   Vendor: ATA       Model: ST3250823AS       Rev: 3.03
> [   26.133159]   Type:   Direct-Access                      ANSI SCSI
> revision: 05
>
> Thanks,
> Prashant Alves