From: Adrian Bunk <bunk@stusta.de>
To: B.Zolnierkiewicz@elka.pw.edu.pl
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
"Andrey J. Melnikoff" <temnota@kmv.ru>
Subject: [2.6 patch] Fix PDC202XX_FORCE kconfig selection
Date: Sat, 14 Jan 2006 16:21:19 +0100 [thread overview]
Message-ID: <20060114152119.GN29663@stusta.de> (raw)
Split PDC202XX_FORCE selection into two independ option and allow user
select it only for specific driver.
Signed-off-by: Andrey Melnikov <temnota@kmv.ru>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was sent by Andrey J. Melnikoff on:
- 28 Dec 2005
drivers/ide/Kconfig | 9 +++++++--
drivers/ide/pci/pdc202xx_new.c | 4 ++--
drivers/ide/pci/pdc202xx_old.c | 10 +++++-----
3 files changed, 14 insertions(+), 9 deletions(-)
--- linux/drivers/ide/Kconfig~ 2005-12-28 21:51:52.000000000 +0300
+++ linux/drivers/ide/Kconfig 2005-12-28 21:51:52.000000000 +0300
@@ -670,11 +670,16 @@
If unsure, say N.
+config PDC202XX_OLD_FORCE
+ bool "Enable controller even if disabled by BIOS"
+ depends on BLK_DEV_PDC202XX_OLD
+ help
+ Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
+
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
+config PDC202XX_NEW_FORCE
bool "Enable controller even if disabled by BIOS"
depends on BLK_DEV_PDC202XX_NEW
help
--- linux/drivers/ide/pci/pdc202xx_new.c~ 2005-12-28 21:52:32.000000000 +0300
+++ linux/drivers/ide/pci/pdc202xx_new.c 2005-12-28 21:52:32.000000000 +0300
@@ -420,7 +420,7 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_NEW_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
@@ -447,7 +447,7 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_NEW_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
--- linux/drivers/ide/pci/pdc202xx_old.c~ 2005-12-28 21:53:26.000000000 +0300
+++ linux/drivers/ide/pci/pdc202xx_old.c 2005-12-28 21:53:26.000000000 +0300
@@ -786,7 +786,7 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_OLD_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
@@ -799,7 +799,7 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_OLD_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
@@ -813,7 +813,7 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_OLD_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
@@ -826,7 +826,7 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_OLD_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
@@ -840,7 +840,7 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
+#ifndef CONFIG_PDC202XX_OLD_FORCE
.enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
#endif
.bootable = OFF_BOARD,
next reply other threads:[~2006-01-14 15:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-14 15:21 Adrian Bunk [this message]
2006-01-14 16:13 ` [2.6 patch] Fix PDC202XX_FORCE kconfig selection Alan Cox
2006-01-14 17:47 ` Bartlomiej Zolnierkiewicz
2006-01-14 19:55 ` [2.6 patch] always enable CONFIG_PDC202XX_FORCE Adrian Bunk
2006-01-15 1:07 ` Alan Cox
2006-01-15 1:50 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060114152119.GN29663@stusta.de \
--to=bunk@stusta.de \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=temnota@kmv.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).