From mboxrd@z Thu Jan 1 00:00:00 1970 From: Parag Warudkar Subject: IDE CDROM - No DMA Date: Fri, 10 Mar 2006 18:42:09 -0500 Message-ID: <200603101842.09251.kernel-stuff@comcast.net> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from rwcrmhc12.comcast.net ([216.148.227.152]:2301 "EHLO rwcrmhc12.comcast.net") by vger.kernel.org with ESMTP id S1750868AbWCJXmL convert rfc822-to-8bit (ORCPT ); Fri, 10 Mar 2006 18:42:11 -0500 Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org I have a "TSSTCorp" CD-RW/DVD Drive in my laptop=20 which is IDE1. =A0DMA is not enabled on this drive. (Copying from CDROM= stalls=20 the machine - conforming that DMA is not really in use.) penguin ~ # hdparm -d /dev/hdc /dev/hdc: =A0using_dma =A0 =A0=3D =A00 (off) penguin ~ # hdparm -d1 /dev/hdc /dev/hdc: =A0setting using_dma to 1 (on) =A0HDIO_SET_DMA failed: Operation not permitted =A0using_dma =A0 =A0=3D =A00 (off) hdparm -i /dev/hdc /dev/hdc: =A0Model=3DTSSTcorpCD-RW/DVD-ROM TSL462C, FwRev=3DDE01, SerialNo=3D =A0Config=3D{ Fixed Removeable DTR<=3D5Mbs DTR>10Mbs nonMagnetic } =A0RawCHS=3D0/0/0, TrkSize=3D0, SectSize=3D0, ECCbytes=3D0 =A0BuffType=3Dunknown, BuffSize=3D0kB, MaxMultSect=3D0 =A0(maybe): CurCHS=3D0/0/0, CurSects=3D0, LBA=3Dyes, LBAsects=3D0 =A0IORDY=3Don/off, tPIO=3D{min:240,w/IORDY:120}, tDMA=3D{min:120,rec:12= 0} =A0PIO modes: =A0pio0 pio1 pio2 pio3 pio4 =A0DMA modes: =A0sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 =A0UDMA modes: udma0 udma1 *udma2 =A0AdvancedPM=3Dno =A0Drive conforms to: device does not report version: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - Perhaps due to this?=20 =A0* signifies the current active mode dmesg =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D Linux version 2.6.15-gentoo-r1 (root@penguin) (gcc version 3.4.4 (Gento= o=20 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #8 SMP PREEMPT Fri Mar 10 18:07:06= EST=20 2006 BIOS-provided physical RAM map: =A0BIOS-e820: 0000000000000000 - 000000000009f000 (usable) =A0BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) =A0BIOS-e820: 0000000000100000 - 000000007f6d3400 (usable) =A0BIOS-e820: 000000007f6d3400 - 0000000080000000 (reserved) =A0BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) =A0BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) =A0BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) =A0BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) =A0BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) =A0BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1142MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 521939 =A0 DMA zone: 4096 pages, LIFO batch:0 =A0 DMA32 zone: 0 pages, LIFO batch:0 =A0 Normal zone: 225280 pages, LIFO batch:31 =A0 HighMem zone: 292563 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v000 DELL =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 =A0) @ 0x000fc370 ACPI: RSDT (v001 DELL =A0 =A0M07 =A0 =A0 0x27d50c11 ASL =A00x00000061) = @ 0x7f6d3a96 ACPI: FADT (v001 DELL =A0 =A0M07 =A0 =A0 0x27d50c11 ASL =A00x00000061) = @ 0x7f6d4800 ACPI: MADT (v001 DELL =A0 =A0M07 =A0 =A0 0x27d50c11 ASL =A00x00000047) = @ 0x7f6d5000 ACPI: MCFG (v016 DELL =A0 =A0M07 =A0 =A0 0x27d50c11 ASL =A00x00000061) = @ 0x7f6d4fc0 ACPI: BOOT (v001 DELL =A0 =A0M07 =A0 =A0 0x27d50c11 ASL =A00x00000061) = @ 0x7f6d4bc0 ACPI: SSDT (v001 =A0PmRef =A0 =A0CpuPm 0x00003000 INTL 0x20050624) @ 0x= 7f6d3ace ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x000000= 00 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: =A0Flat. =A0Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists Kernel command line: real_root=3D/dev/sda3 ide=3Dautodma ide_setup: ide=3Dautodma -- BAD OPTION mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1831.119 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2065536k/2087756k available (2641k kernel code, 21132k reserved= , 748k=20 data, 232k init, 1170252k highmem) Checking if this processor honours the WP bit even in supervisor mode..= =2E Ok. Calibrating delay using timer specific routine.. 3667.61 BogoMIPS=20 (lpj=3D7335231) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000=20 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0= 000c1a9=20 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a= 9=20 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Genuine Intel(R) CPU =A0 =A0 =A0 =A0 =A0 T2400 =A0@ 1.83GHz= stepping 08 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3662.09 BogoMIPS=20 (lpj=3D7324196) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000=20 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0= 000c1a9=20 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a= 9=20 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU =A0 =A0 =A0 =A0 =A0 T2400 =A0@ 1.83GHz= stepping 08 Total of 2 processors activated (7329.71 BogoMIPS). ENABLING IO-APIC IRQs =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 checking TSC synchronization across 2 CPUs:=20 CPU#0 had 0 usecs TSC skew, fixed it up. CPU#1 had 0 usecs TSC skew, fixed it up. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb4d6, last bus=3D14 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". =A0If it helps, po= st a report pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x1000-0x1005 could not be reserved pnp: 00:01: ioport range 0x1008-0x100f could not be reserved pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved pnp: 00:02: ioport range 0x1006-0x1007 has been reserved pnp: 00:02: ioport range 0x100a-0x1059 could not be reserved pnp: 00:02: ioport range 0x1060-0x107f has been reserved pnp: 00:02: ioport range 0x1080-0x10bf has been reserved pnp: 00:02: ioport range 0x10c0-0x10df has been reserved pnp: 00:07: ioport range 0xc80-0xcff has been reserved pnp: 00:07: ioport range 0x910-0x91f has been reserved pnp: 00:07: ioport range 0x920-0x92f has been reserved pnp: 00:07: ioport range 0xcb0-0xcbf has been reserved pnp: 00:07: ioport range 0x940-0x97f has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 =A0 IO window: disabled. =A0 MEM window: disabled. =A0 PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 =A0 IO window: disabled. =A0 MEM window: dfd00000-dfdfffff =A0 PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 =A0 IO window: d000-dfff =A0 MEM window: dfa00000-dfcfffff =A0 PREFETCH window: d0000000-d01fffff PCI: Bridge: 0000:00:1e.0 =A0 IO window: disabled. =A0 MEM window: df900000-df9fffff =A0 PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag at 0x79 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1142014773.660:1): initialized highmem bounce pool size: 64 pages Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] vesafb: Intel Corporation, Intel(r) 82945GM Chipset Family Graphics=20 Controller, Hardware Version 0.0 (OEM: Intel(r) 82945GM Chipset Family=20 Graphics Chip Accelerated VGA BIOS) vesafb: VBE version: 3.0 vesafb: VBIOS/hardware supports DDC2 transfers vesafb: monitor limits: vf =3D 60 Hz, hf =3D 75 kHz, clk =3D 161 MHz vesafb: using default BIOS refresh rate vesafb: scrolling: redraw Console: switching to colour frame buffer device 200x75 vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7872k, t= otal=20 7872k fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes =A0rom: no =A0post: no) ACPI: Video Device [VID] (multi-head: yes =A0rom: no =A0post: no) ACPI: Video Device [VID2] (multi-head: yes =A0rom: no =A0post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM] (44 C) lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915= G/915GM=20 chipsets intelfb: Version 0.9.2 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabl= ed mice: PS/2 mouse device common for all mice Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebu= s=3Dxx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... input: AT Translated Set 2 keyboard as /class/input/input0 Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x20= 0000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 hdc: TSSTcorpCD-RW/DVD-ROM TSL462C, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 ata: 0x170 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 ata1: dev 0 cfg 49:2f00 82:746b 83:7f09 84:6023 85:7469 86:3e09 87:6023= =20 88:203f ata1: dev 0 ATA-6, max UDMA/100, 153356490 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix =A0 Vendor: ATA =A0 =A0 =A0 Model: TOSHIBA MK8032GS =A0Rev: AS11 =A0 Type: =A0 Direct-Access =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= ANSI SCSI revision: 05 SCSI device sda: 153356490 512-byte hdwr sectors (78519 MB) SCSI device sda: drive cache: write back SCSI device sda: 153356490 512-byte hdwr sectors (78519 MB) SCSI device sda: drive cache: write back =A0sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 185 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[185] =A0MMIO=3D[df9fd80= 0-df9fdfff] =A0 Max Packet=3D[2048] ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 225, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000bf80 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000bf60 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 50, io base 0x0000bf40 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 58, io base 0x0000bf20 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ieee1394: Host added: ID:BUS[0-00:1023] =A0GUID[334fc000345c4521] hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. usb 4-2: new low speed USB device using uhci_hcd and address 2 input: Microsoft Microsoft Wireless Optical Mouse=AE 1.0A as /class/inp= ut/input2 input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse=AE= 1.0A]=20 on usb-0000:00:1d.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered ip_conntrack version 2.4 (8192 buckets, 65536 max) - 212 bytes per conn= track ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . =A0 http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 1 devices found EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 232k freed kjournald starting. =A0Commit interval 5 seconds eth1394: $Rev: 1312 $ Ben Collins eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Adding 2008116k swap on /dev/sda2. =A0Priority:-1 extents:1 across:2008= 116k EXT3 FS on sda3, internal journal =A0 Vendor: Maxtor =A0 =A0Model: OneTouch =A0 =A0 =A0 =A0 =A0Rev: 0201 =A0 Type: =A0 Direct-Access =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= ANSI SCSI revision: 00 SCSI device sdb: 398295040 512-byte hdwr sectors (203927 MB) sdb: assuming drive cache: write through SCSI device sdb: 398295040 512-byte hdwr sectors (203927 MB) sdb: assuming drive cache: write through =A0sdb: sdb1 sdb2 sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete b44.c:v0.97 (Nov 30, 2005) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177 eth1: Broadcom 4400 10/100BaseT Ethernet 00:14:22:f2:31:89 [drm] Initialized drm 1.0.1 20051102 PCI: Unable to reserve mem region #3:10000000@c0000000 for device 0000:= 00:02.0 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.4.0 20060119 on minor 0:=20 [drm] Used old pci detect: framebuffer loaded ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, 1.1.12 ieee80211: Copyright (C) 2004-2005 Intel Corporation=20 ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux= ,=20 0.0.70 ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:0c:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection kjournald starting. =A0Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. hw_random hardware driver 1.0.0 loaded ipw3945: Detected geography ABG (11 802.11bg channels, 9 802.11a channe= ls) ieee80211_crypt: registered algorithm 'TKIP'