From: Uwe Hermann <uwe@hermann-uwe.de>
To: linux-ide@vger.kernel.org
Cc: B.Zolnierkiewicz@elka.pw.edu.pl
Subject: [PATCH] Support for DMA on ICH6M / piix.
Date: Fri, 24 Mar 2006 05:17:06 +0100 [thread overview]
Message-ID: <20060324041706.GA1337@aragorn> (raw)
[-- Attachment #1: Type: text/plain, Size: 3094 bytes --]
Hi,
the disk drive in my laptop cannot enable DMA with "hdparm -d1 /dev/hda",
unless I use a kernel with the supplied patch.
The patch was originally written by Erik Slagter for 2.6.12
(see http://marc.theaimsgroup.com/?l=linux-ide&m=112030174904055&w=2) and
I have successfully used it until 2.6.14. I want to upgrade to 2.6.16 ASAP,
so I adapted the patch for vanilla 2.6.16.
It works for me, but you might want to check whether it messes up things...
More info on my hardware:
$ dmesg | grep SAMSUNG
hda: SAMSUNG MP0804H, ATA DISK drive
$ lspci | grep ICH6M
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
The patch:
diff -Naurp linux-2.6.16.orig/drivers/ide/pci/piix.c linux-2.6.16/drivers/ide/pci/piix.c
--- linux-2.6.16.orig/drivers/ide/pci/piix.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/ide/pci/piix.c 2006-03-24 00:29:34.000000000 +0100
@@ -132,6 +132,7 @@ static u8 piix_ratemask (ide_drive_t *dr
case PCI_DEVICE_ID_INTEL_82801DB_11:
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
+ case PCI_DEVICE_ID_INTEL_ICH6_5:
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
@@ -447,6 +448,7 @@ static unsigned int __devinit init_chips
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_82801E_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
+ case PCI_DEVICE_ID_INTEL_ICH6_5:
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
@@ -578,6 +580,7 @@ static ide_pci_device_t piix_pci_info[]
/* 22 */ DECLARE_PIIX_DEV("ICH4"),
/* 23 */ DECLARE_PIIX_DEV("ESB2"),
/* 24 */ DECLARE_PIIX_DEV("ICH8M"),
+ /* 25 */ DECLARE_PIIX_DEV("ICH6M"),
};
/**
@@ -655,6 +658,7 @@ static struct pci_device_id piix_pci_tbl
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 25},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
diff -Naurp linux-2.6.16.orig/include/linux/pci_ids.h linux-2.6.16/include/linux/pci_ids.h
--- linux-2.6.16.orig/include/linux/pci_ids.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/include/linux/pci_ids.h 2006-03-24 00:28:35.000000000 +0100
@@ -2092,6 +2092,7 @@
#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
+#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653
#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a
#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d
#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e
HTH, Uwe.
--
Uwe Hermann
http://www.hermann-uwe.de
http://www.it-services-uh.de | http://www.crazy-hacks.org
http://www.holsham-traders.de | http://www.unmaintained-free-software.org
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 191 bytes --]
reply other threads:[~2006-03-24 4:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060324041706.GA1337@aragorn \
--to=uwe@hermann-uwe.de \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).