* sata_mv: ata5: Entering mv_eng_timeout
@ 2006-04-17 0:43 Onis
0 siblings, 0 replies; only message in thread
From: Onis @ 2006-04-17 0:43 UTC (permalink / raw)
To: linux-ide
Hi!
I'm getting following kernel messages during "heavy load" (xfs_fsr). It's
always the same port (ata5). sata_mv seems to get over these errors just
fine and my raid5 stays ok. Are these messages something to worry about?
dmesg
-----
ata5: Entering mv_eng_timeout
mmio_base ffffc20000080000 ap ffff81003ea3bc80 qc ffff81003ea3bde8 scsi_cmnd
ffff81002489e340 &cmnd ffff81002489e3b0
ata5: no device found (phy stat 00000100)
ata5: status=0x50 { DriveReady SeekComplete }
ata5: error=0x01 { AddrMarkNotFound }
sde: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
System
------
* Tyan Thunder S2882 Dual Opteron 240
* Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller
(rev 09) (Supermicro)
* 8 x Maxtor Maxline III 300GB SATA
* Debian Sarge AMD64
* kernel 2.6.17-rc1-git7 + xfs "remount,ro" patch
Please CC, I'm not on the list. Thanks!
- Onion
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-04-17 0:43 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-17 0:43 sata_mv: ata5: Entering mv_eng_timeout Onis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).