From: "Raphael Bossek" <raphael.bossek@gmx.de>
To: linux-ide@vger.kernel.org
Subject: How to debug CompactFlash card fails on PATA port of an SATA controller ?
Date: Tue, 16 May 2006 10:11:21 +0200 [thread overview]
Message-ID: <20060516081121.78840@gmx.net> (raw)
Hi,
I get the PATA interface of my Promise PDC40775 (SATA 300 TX2plus) working.
But now I run into trouble while connecting a SimpleTech CompactFlash card
SLCF512J2U-F (512MB). This are are the messages from log:
sata_promise 0000:00:0a.0: version 1.04
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 217
sata_promise PATA port found
ata9: SATA max UDMA/133 cmd 0xBE9D0200 ctl 0xBE9D0238 bmdma 0x0 irq 217
ata10: SATA max UDMA/133 cmd 0xBE9D0280 ctl 0xBE9D02B8 bmdma 0x0 irq 217
sata_promiseDisabling SATA for third port
ata11: PATA max UDMA/133 cmd 0xBE9D0300 ctl 0xBE9D0338 bmdma 0x0 irq 217
ata9: SATA link down (SStatus 0)
scsi8 : sata_promise
ata10: SATA link down (SStatus 0)
scsi9 : sata_promise
ata11: dev 0 cfg 49:0300 82:7068 83:4004 84:4000 85:7068 86:0004 87:4000 88:0000
ata11: dev 0 ATA-0, max MWDMA2, 1000944 sectors: LBA
ata11: dev 0 configured for MWDMA2
scsi10 : sata_promise
Vendor: ATA Model: STI Flash 7.3.0 Rev: 06/1
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb:<3>ata11: command timeout
ata11: translated ATA stat/err 0xff/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata11: status=0xff { Busy }
sd 10:0:0:0: SCSI error: return code = 0x8000002
sdb: Current: sense key: Aborted Command
Additional sense: Scsi parity error
Info fld=0xfffffff
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata11: command timeout
ata11: translated ATA stat/err 0xff/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata11: status=0xff { Busy }
sd 10:0:0:0: SCSI error: return code = 0x8000002
sdb: Current: sense key: Aborted Command
Additional sense: Scsi parity error
Info fld=0xfffffff
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
sd 10:0:0:0: Attached scsi disk sdb
How can I identify the real problem for this device ?
--
Raphael Bossek
--
Bis zu 70% Ihrer Onlinekosten sparen: GMX SmartSurfer!
Kostenlos downloaden: http://www.gmx.net/de/go/smartsurfer
next reply other threads:[~2006-05-16 8:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-16 8:11 Raphael Bossek [this message]
2006-05-17 5:18 ` How to debug CompactFlash card fails on PATA port of an SATA controller ? Albert Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060516081121.78840@gmx.net \
--to=raphael.bossek@gmx.de \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).