Re: [BUGREPORT 1/3] Kernel Oops with HPT372A IDE controller

[Foli Ayivoh <it21@arcor.de>]

Sergei Shtylyov wrote:
> 
> Hello.
> 
> Foli Ayivoh wrote:
> > Kernel Oops with HighPoint RocketRAID ATA133 aka HPT372A/N since kernel 2.6
> > Now tested with kernel 2.6.17-rc4
> > 
> > Kernel is on bootable CD-ROM
> > Modules are loaded from initrd
> > 
> > This is what I copied from screen:
> > 
> > Loading hpt366
> > [17179578.396000] HPT372A: IDE controller at PCI slot 0000:01:0a.0
> > [17179578.400000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
> > [17179578.404000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 18
> > [17179578.408000] HPT372A: chipset revision 2
> > [17179578.412000] HPT372A: 100% native mode on irq 18
> > [17179578.416000] hpt: HPT372N detected, using 372N timing.
> > [17179578.420000] FREQ: 125 PLL: 45
> > [17179579.536000] No Clock Stabilization!!!
> > [17179579.540000] hpt: no known IDE timings, disabling DMA
> > [17179579.544000] hpt: HPT372N detected, using 372N timing.
> > [17179579.548000] FREQ: 156 PLL: 66
> > [17179579.664000] No Clock Stabilization!!!
> 
>     Please try my latest patches. This one should fix this (and oops should be
> gone):
> 
> http://marc.theaimsgroup.com/?l=linux-ide&m=114677223914159&w=2
> 
> MBR, Sergei
> 
all patches applied, but I still get Kernel Oops :-(

some smal difference here:

  HPT372A: IDE controller at PCI slot 0000:01:0a.0
  ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
  ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 18
  HPT372A: chipset revision 2
  HPT372A: 100% native mode on irq 18
+ HPT37X: no clock data saved by BIOS
+ HPT3xxN detected, FREQ: 124, PLL: 45
+ HPT37xN unknown bus timing [48 4].

but the rest is the same ...