From mboxrd@z Thu Jan 1 00:00:00 1970 From: Foli Ayivoh Subject: Re: [BUGREPORT 1/3] Kernel Oops with HPT372A IDE controller Date: Wed, 17 May 2006 00:59:45 +0200 Message-ID: <200605170059.45455.it21@arcor.de> References: <200605142110.53348.it21@arcor.de> <4468960D.2090004@ru.mvista.com> Reply-To: 101551.753@compuserve.com Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-in-01.arcor-online.net ([151.189.21.41]:43973 "EHLO mail-in-01.arcor-online.net") by vger.kernel.org with ESMTP id S1750816AbWEPW6l (ORCPT ); Tue, 16 May 2006 18:58:41 -0400 In-Reply-To: <4468960D.2090004@ru.mvista.com> Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Sergei Shtylyov Cc: linux-ide@vger.kernel.org Sergei Shtylyov wrote: > > Hello. > > Foli Ayivoh wrote: > > Kernel Oops with HighPoint RocketRAID ATA133 aka HPT372A/N since kernel 2.6 > > Now tested with kernel 2.6.17-rc4 > > > > Kernel is on bootable CD-ROM > > Modules are loaded from initrd > > > > This is what I copied from screen: > > > > Loading hpt366 > > [17179578.396000] HPT372A: IDE controller at PCI slot 0000:01:0a.0 > > [17179578.400000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > > [17179578.404000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 18 > > [17179578.408000] HPT372A: chipset revision 2 > > [17179578.412000] HPT372A: 100% native mode on irq 18 > > [17179578.416000] hpt: HPT372N detected, using 372N timing. > > [17179578.420000] FREQ: 125 PLL: 45 > > [17179579.536000] No Clock Stabilization!!! > > [17179579.540000] hpt: no known IDE timings, disabling DMA > > [17179579.544000] hpt: HPT372N detected, using 372N timing. > > [17179579.548000] FREQ: 156 PLL: 66 > > [17179579.664000] No Clock Stabilization!!! > > Please try my latest patches. This one should fix this (and oops should be > gone): > > http://marc.theaimsgroup.com/?l=linux-ide&m=114677223914159&w=2 > > MBR, Sergei > all patches applied, but I still get Kernel Oops :-( some smal difference here: HPT372A: IDE controller at PCI slot 0000:01:0a.0 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 18 HPT372A: chipset revision 2 HPT372A: 100% native mode on irq 18 + HPT37X: no clock data saved by BIOS + HPT3xxN detected, FREQ: 124, PLL: 45 + HPT37xN unknown bus timing [48 4]. but the rest is the same ...