From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jochen Heuer Subject: Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4 Date: Wed, 28 Jun 2006 10:09:12 +0200 Message-ID: <20060628080912.GA18463@planetzork.ping.de> References: <20060627184320.GA16782@planetzork.ping.de> <44A222CB.1080300@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from lilly.ping.de ([83.97.42.2]:5895 "HELO lilly.ping.de") by vger.kernel.org with SMTP id S1423216AbWF1IOo (ORCPT ); Wed, 28 Jun 2006 04:14:44 -0400 Content-Disposition: inline In-Reply-To: <44A222CB.1080300@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org Hi Tejun, > >ata1: command 0xca timeout, stat 0x50 host_stat 0x4 > >ata1: status=0x50 { DriveReady SeekComplete } > >ata1: command 0xea timeout, stat 0x50 host_stat 0x0 > >ata1: status=0x50 { DriveReady SeekComplete } > > The original error is probably a hardware problem. ok, I will try to get this disc replaced after some testing ... > >I had hoped 2.6.17 would fix this since I seem to remember some fixes for > >libata with similar error messages. But at least on my system it did not. > > Can you apply the following patch and see what happens? Patch is installed and system is running: libata version 1.30 loaded. sata_via 0000:00:0f.0: version 1.2 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 18 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xA800 irq 18 ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 18 scsi0 : sata_via ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/133 scsi1 : sata_via ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: configured for UDMA/133 Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3200822AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 I will monitor this for a some time. And thanks for the quick response! Jochen -- Well, yeah ... I suppose there's no point in getting greedy, is there? << Calvin & Hobbes >>