From: Adrian Bunk <bunk@stusta.de>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: akpm@osdl.org, B.Zolnierkiewicz@elka.pw.edu.pl,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/ide/: cleanups
Date: Tue, 11 Jul 2006 17:19:33 +0200 [thread overview]
Message-ID: <20060711151933.GT13938@stusta.de> (raw)
In-Reply-To: <44B3B7E8.3080800@ru.mvista.com>
On Tue, Jul 11, 2006 at 06:38:32PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> Adrian Bunk wrote:
>
> >This patch contains the following clenups:
> >- setup-pci.c: #if 0 the unused ide_pci_unregister_driver()
> >- ide.c: remove the unused EXPORT_SYMBOL(ide_register_hw)
>
> It's used by arm/bast-ide.c (CONFIG_NLK_DEV_IDE_BAST is defined as
> tristate).
Sorry, my fault.
I did grep and check the options, but it seems I missed this one.
Updated patch below.
> I don't understand what's the point insisting on its removal
> since any SOC modular driver in the future may need it...
There are two points:
- re-adding is trivial if it's ever needed, but until then it only
bloats the kernel
- drivers/ide/ are the legacy IDE drivers that will be superseded
by libata
>...
> WBR, Sergei
cu
Adrian
<-- snip -->
This patch contains the following clenups:
- setup-pci.c: #if 0 the unused ide_pci_unregister_driver()
- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/ide/ide-dma.c | 2 --
drivers/ide/setup-pci.c | 4 +++-
include/linux/ide.h | 1 -
3 files changed, 3 insertions(+), 4 deletions(-)
--- linux-2.6.17-rc1-mm2-full/include/linux/ide.h.old 2006-04-10 22:46:27.000000000 +0200
+++ linux-2.6.17-rc1-mm2-full/include/linux/ide.h 2006-04-10 22:46:36.000000000 +0200
@@ -1188,7 +1188,6 @@
extern void ide_scan_pcibus(int scan_direction) __init;
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE)
-extern void ide_pci_unregister_driver(struct pci_driver *driver);
void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
--- linux-2.6.17-rc1-mm2-full/drivers/ide/ide-dma.c.old 2006-04-10 22:44:21.000000000 +0200
+++ linux-2.6.17-rc1-mm2-full/drivers/ide/ide-dma.c 2006-04-10 22:44:28.000000000 +0200
@@ -152,8 +152,6 @@
return 0;
}
-EXPORT_SYMBOL_GPL(ide_in_drive_list);
-
/**
* ide_dma_intr - IDE DMA interrupt handler
* @drive: the drive the interrupt is for
--- linux-2.6.17-rc1-mm2-full/drivers/ide/setup-pci.c.old 2006-04-10 22:46:46.000000000 +0200
+++ linux-2.6.17-rc1-mm2-full/drivers/ide/setup-pci.c 2006-04-10 22:47:03.000000000 +0200
@@ -807,7 +807,8 @@
* Unregister a currently installed IDE driver. Returns are the same
* as for pci_unregister_driver
*/
-
+
+#if 0
void ide_pci_unregister_driver(struct pci_driver *driver)
{
if(!pre_init)
@@ -817,6 +818,7 @@
}
EXPORT_SYMBOL_GPL(ide_pci_unregister_driver);
+#endif /* 0 */
/**
* ide_scan_pcidev - find an IDE driver for a device
next prev parent reply other threads:[~2006-07-11 15:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-11 14:16 [2.6 patch] drivers/ide/: cleanups Adrian Bunk
2006-07-11 14:30 ` Michael Tokarev
2006-07-11 14:33 ` Arjan van de Ven
2006-07-11 16:20 ` Alan Cox
2006-07-15 0:37 ` Adrian Bunk
2006-07-11 14:38 ` Sergei Shtylyov
2006-07-11 15:19 ` Adrian Bunk [this message]
2006-07-11 16:19 ` Alan Cox
2006-07-11 16:07 ` Adrian Bunk
2006-07-14 10:43 ` Benjamin Herrenschmidt
2006-07-14 16:33 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060711151933.GT13938@stusta.de \
--to=bunk@stusta.de \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=akpm@osdl.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).