From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jim Paris Subject: Re: sata_sis only recognizing primary drive in 2.6.18 Date: Fri, 6 Oct 2006 17:22:51 -0400 Message-ID: <20061006212251.GA1324@jim.sh> References: <20061006065816.GA5782@jim.sh> <45263683.408@gmx.net> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="LQksG6bCIzRHxTLp" Return-path: Received: from NEUROSIS.MIT.EDU ([18.95.3.133]:18379 "EHLO neurosis.jim.sh") by vger.kernel.org with ESMTP id S932641AbWJFVXC (ORCPT ); Fri, 6 Oct 2006 17:23:02 -0400 Content-Disposition: inline In-Reply-To: <45263683.408@gmx.net> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Uwe Koziolek Cc: Tejun Heo , linux-ide@vger.kernel.org, muthas@mit.edu, fragmede@gmail.com --LQksG6bCIzRHxTLp Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Uwe Koziolek wrote: > the sata_sis is running without slave support in the versions from > kernel.org. That is ok if you are using > a SiS964 and 965L chip. The SiS 965, SiS180 and SiS966 needs a slave > support. > > The attached patch against 2.6.18 should help. > > + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS, Hi Uwe, Adding ATA_FLAG_SLAVE_POSS works great -- all drives are now recognized. dmesg and lspci output are attached. Thank you! -jim --LQksG6bCIzRHxTLp Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="lspci.txt" 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 761/M761 Host (rev 01) Subsystem: Foxconn International, Inc. Unknown device 0c67 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Capabilities: [d0] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [d0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM unknown, Port 0 Link: Latency L0s <1us, L1 <2us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [bc] HyperTransport: MSI Mapping Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff000 Data: 4041 Capabilities: [f4] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Unknown device 0000 00: 39 10 04 00 07 04 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00 20: 00 d4 f0 db 01 c0 f1 c7 00 00 00 00 00 00 00 00 30: 00 00 00 00 d0 00 00 00 00 00 00 00 09 01 08 00 40: 10 00 00 78 02 10 01 00 52 e3 00 16 80 02 00 00 50: 00 00 00 2e 00 00 00 00 80 c1 05 00 52 ff 11 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 07 77 27 13 97 00 00 00 00 00 00 00 00 00 00 00 a0: 05 f4 01 00 00 f0 ef fe 41 40 00 00 00 00 00 00 b0: 0d 00 00 00 39 10 00 00 00 00 00 00 08 a0 02 a8 c0: 40 01 18 00 02 88 43 28 00 10 19 00 00 00 60 5c d0: 10 bc 41 01 20 00 00 00 10 08 10 00 01 c1 10 00 e0: 00 00 01 31 80 25 00 00 c0 03 40 00 00 00 00 00 f0: 00 00 00 00 01 b0 02 c8 00 00 00 00 00 00 00 00 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 4000 [size=16] Capabilities: [58] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 39 10 13 55 05 00 10 02 01 80 01 01 00 80 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 40 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c 30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 06 00 00 00 00 00 50: 82 21 82 21 2a 96 80 d0 01 00 02 80 00 00 00 00 60: fb aa fb aa 00 00 00 00 c8 00 a0 00 00 00 ff ff 70: 26 21 06 04 00 60 1c 1e 56 23 06 04 00 60 1c 1e 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Foxconn International, Inc. Unknown device 0c67 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [d0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <1us, L1 <2us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [f4] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [130] Advanced Error Reporting 00: 39 10 0a 00 07 00 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 b1 b1 00 00 20: b0 df b0 df e1 df e1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 d0 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 00 00 00 00 03 06 0c 00 00 00 08 00 50: 2e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 08 b0 02 a8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d c0 00 00 39 10 00 00 00 00 00 00 00 00 00 00 c0: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 10 f4 41 01 20 00 00 00 10 08 10 00 01 cd 00 00 e0: 00 00 11 10 00 00 00 00 c0 03 40 00 00 00 00 00 f0: 00 00 00 00 01 00 02 c8 00 00 00 00 00 00 00 00 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [d0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <1us, L1 <2us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [f4] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [130] Advanced Error Reporting 00: 39 10 0a 00 07 00 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 d1 d1 00 00 20: d0 df d0 df c1 df c1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 d0 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 00 00 00 00 03 06 0c 00 00 00 08 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 08 b0 02 a8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0d c0 00 00 39 10 00 00 00 00 00 00 00 00 00 00 c0: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 10 f4 41 01 20 00 00 00 10 08 10 00 01 cd 00 00 e0: 00 00 01 10 00 00 00 00 c0 03 40 00 00 00 00 00 f0: 00 00 00 00 01 00 02 c8 00 00 00 00 00 00 00 00 00:0a.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- APIC 0 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 0-80000000 NUMA: Using 63 for the hash shift. Bootmem setup node 0 0000000000000000-000000007fef0000 No mptable found. On node 0 totalpages: 515872 DMA zone: 3060 pages, LIFO batch:0 DMA32 zone: 512812 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 No local APIC present Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) SMP: Allowing 0 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 515872 Kernel command line: root=/dev/sda2 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2199.416 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ b0000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:00:00 Aperture from AGP @ b0000000 size 256 MB (APSIZE f00) Memory: 2055144k/2096064k available (1929k kernel code, 40532k reserved, 863k data, 176k init) Calibrating delay using timer specific routine.. 4400.89 BogoMIPS (lpj=8801796) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0e60) weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Apic disabled by BIOS Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 5108k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 0:18 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0400 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: match found with the PnP device '00:0a' and the driver 'system' pnp: match found with the PnP device '00:0b' and the driver 'system' PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: d4000000-dbffffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:06.0 IO window: b000-bfff MEM window: dfb00000-dfbfffff PREFETCH window: dfe00000-dfefffff PCI: Bridge: 0000:00:07.0 IO window: d000-dfff MEM window: dfd00000-dfdfffff PREFETCH window: dfc00000-dfcfffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1160168547.588:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) 0000:00:03.3 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie03] PCI: Setting latency timer of device 0000:00:07.0 to 64 pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] Allocate Port Service[0000:00:07.0:pcie03] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:06' and the driver 'serial' 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: match found with the PnP device '00:07' and the driver 'serial' 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize usbmon: debugfs is not available pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 176k freed ACPI: Fan [FAN] (on) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [THRM] (36 C) input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx HPT302: IDE controller at PCI slot 0000:00:0b.0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 HPT302: chipset revision 2 HPT302: 100% native mode on irq 10 HPT37X: using 33MHz PCI clock ide2: BM-DMA at 0xee00-0xee07, BIOS settings: hde:DMA, hdf:pio HPT37X: using 33MHz PCI clock ide3: BM-DMA at 0xee08-0xee0f, BIOS settings: hdg:DMA, hdh:pio Probing IDE interface ide2... ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) hde: ST3160022A, ATA DISK drive ide2 at 0xf600-0xf607,0xf502 on irq 10 Probing IDE interface ide3... hdg: SAMSUNG SP0802N, ATA DISK drive ide3 at 0xf400-0xf407,0xf302 on irq 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 6 (level, low) -> IRQ 6 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: irq 6, io mem 0xdfffc000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. hde: max request size: 512KiB hde: 312558593 sectors (160029 MB) w/1024KiB Cache, CHS=19455/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hde2 hde3 hdg: max request size: 512KiB hdg: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdg: cache flushes supported hdg: hdg1 hdg2 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 5, io mem 0xdffff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 10, io mem 0xdfffe000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:03.2: irq 11, io mem 0xdfffd000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS965 ATA 133 (2nd gen) controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Hewlett-Packard HP f2100a Optical USB Travel Mouse as /class/input/input1 input: USB HID v1.00 Mouse [Hewlett-Packard HP f2100a Optical USB Travel Mouse] on usb-0000:00:03.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver hda: DVD DC DQ60, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SAMSUNG SP0822N, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 512KiB hdc: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) hdc: cache flushes supported hdc: hdc1 hdc2 sata_sis 0000:00:05.0: version 0.6 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 sata_sis 0000:00:05.0: Detected SiS 182 chipset ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xFB02 bmdma 0xF800 irq 11 ata2: SATA max UDMA/133 cmd 0xFA00 ctl 0xF902 bmdma 0xF808 irq 11 scsi0 : sata_sis hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 1419kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.01: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 1 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : sata_sis ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xFA07 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sd 0:0:1:0: Attached scsi disk sdb md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 md: raid1 personality registered for level 1 raid5: automatically using best checksumming function: generic_sse generic_sse: 6730.000 MB/sec raid5: using function: generic_sse (6730.000 MB/sec) raid6: int64x1 2004 MB/s raid6: int64x2 2651 MB/s raid6: int64x4 2512 MB/s raid6: int64x8 1756 MB/s raid6: sse2x1 2739 MB/s raid6: sse2x2 3692 MB/s raid6: sse2x4 3989 MB/s raid6: using algorithm sse2x4 (3989 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: md0 stopped. md: bind md: bind md: bind md: kicking non-fresh hdc1 from array! md: unbind md: export_rdev(hdc1) raid5: device hde1 operational as raid disk 1 raid5: device hdg1 operational as raid disk 2 raid5: allocated 3212kB for md0 raid5: raid level 5 set md0 active with 2 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:2 fd:1 disk 1, o:1, dev:hde1 disk 2, o:1, dev:hdg1 md: md1 stopped. md: bind md: bind md: bind md: kicking non-fresh hdc2 from array! md: unbind md: export_rdev(hdc2) raid1: raid set md1 active with 2 out of 3 mirrors kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:08' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] agpgart: Unsupported SiS chipset (device id: 0761) ts: Compaq touchscreen protocol output sis190 Gigabit Ethernet driver 1.2 loaded. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:04.0 to 64 0000:00:04.0: Read MAC address from EEPROM Intel 810 + AC97 Audio, version 1.01, 17:40:31 Sep 29 2006 0000:00:04.0: Broadcom PHY BCM5461 transceiver at address 1. 0000:00:04.0: Using transceiver at address 1 as default. 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc2000001e000 (IRQ: 5), 71:d9:00:00:00:00 eth0: RGMII mode. eth0: Enabling Auto-negotiation. ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 i810: SiS 7012 found at IO 0xfe00 and 0xf000, MEM 0x0000 and 0x0000, IRQ 10 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 codec, id: ALG97 (Unknown) i810_audio: only 48Khz playback available. i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.5 addr 0xdfbfc000 irq 5 Yukon-EC (0xb6) rev 2 sky2 eth0: addr 00:00:5a:00:01:98 sky2 0000:02:00.0: No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information. EXT3 FS on sda2, internal journal loop: loaded (max 8 devices) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. sky2 eth0: enabling interface ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present --LQksG6bCIzRHxTLp--