* libata: CD and dvd devices not recognized
@ 2007-03-14 22:14 YUP
2007-03-15 3:56 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-14 22:14 UTC (permalink / raw)
To: linux-ide
Hello,
I have the folowing problem. I'm running kubuntu box with
2.6.20-10 kernel with ubuntu patches and my cdrom as well as dvd drive
doesn't recognized at all. I've already reported this on kubuntu forum,
but nobody can answer me. The link is here:
http://kubuntuforums.net/forums/index.php?topic=3080227.0
I also tried to compile generic kernels from kernel.org with the same
result. Can anybody say what is going on with my hardware or kernel?
Before 2.6.20 everything ran smoothly.
My latest dmesg output:
[ 0.000000] Linux version 2.6.20-10-386 (root@vernadsky) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Mar 11 23:59:49 UTC 2007 (Ubuntu
2.6.20-10.17-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size:
0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size:
0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size:
0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size:
000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size:
0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c80
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP (v000 GBT )
@ 0x000f6710
[ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x1fff6800
[ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT
0x0100000c) @ 0x00000000
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:1 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] Detected 1800.141 MHz processor.
[ 28.901063] Built 1 zonelists. Total pages: 130033
[ 28.901067] Kernel command line:
root=UUID=bdcb0225-6620-4d74-9fe5-2f008da464c7 ro quiet splash
[ 28.901313] mapped APIC to ffffd000 (fee00000)
[ 28.901317] mapped IOAPIC to ffffc000 (fec00000)
[ 28.901323] Enabling fast FPU save and restore... done.
[ 28.901327] Enabling unmasked SIMD FPU exception support... done.
[ 28.901352] Initializing CPU#0
[ 28.901478] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 28.903160] Console: colour VGA+ 80x25
[ 28.903823] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 28.904492] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 28.927726] Memory: 508900k/524224k available (1909k kernel code,
14664k reserved, 855k data, 324k init, 0k highmem)
[ 28.927741] virtual kernel memory layout:
[ 28.927743] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 28.927745] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.927746] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 28.927748] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 28.927750] .init : 0xc03b6000 - 0xc0407000 ( 324 kB)
[ 28.927751] .data : 0xc02dd483 - 0xc03b3434 ( 855 kB)
[ 28.927753] .text : 0xc0100000 - 0xc02dd483 (1909 kB)
[ 28.927757] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 29.005328] Calibrating delay using timer specific routine.. 3603.20
BogoMIPS (lpj=7206406)
[ 29.005379] Security Framework v1.0.0 initialized
[ 29.005391] SELinux: Disabled at boot.
[ 29.005407] Mount-cache hash table entries: 512
[ 29.005567] CPU: After generic identify, caps: 3febfbff 00000000
00000000 00000000 00000000 00000000 00000000
[ 29.005582] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 29.005585] CPU: L2 cache: 256K
[ 29.005588] CPU: After all inits, caps: 3febfbff 00000000 00000000
00003080 00000000 00000000 00000000
[ 29.005603] Compat vDSO mapped to ffffe000.
[ 29.005617] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
[ 29.005630] Checking 'hlt' instruction... OK.
[ 29.022034] Early unpacking initramfs... done
[ 29.465585] ExtINT not setup in hardware but reported by MP table
[ 29.465670] ENABLING IO-APIC IRQs
[ 29.465900] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 29.612735] Booting paravirtualized kernel on bare hardware
[ 29.612845] Time: 19:44:46 Date: 02/14/107
[ 29.612900] NET: Registered protocol family 16
[ 29.613087] EISA bus registered
[ 29.638722] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=2
[ 29.638726] PCI: Using configuration type 1
[ 29.638729] Setting up standard PCI resources
[ 29.645436] ACPI: Interpreter disabled.
[ 29.645445] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.645456] pnp: PnP ACPI: disabled
[ 29.645459] PnPBIOS: Scanning system for PnP BIOS support...
[ 29.645515] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc20
[ 29.645519] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc50, dseg
0xf0000
[ 29.646852] PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
[ 29.646930] PCI: Probing PCI hardware
[ 29.646937] PCI: Probing PCI hardware (bus 00)
[ 29.647200] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 29.647206] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 29.647575] Boot video device is 0000:01:00.0
[ 29.647815] PCI: Transparent bridge - 0000:00:1e.0
[ 29.648646] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
[ 29.648666] PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19
[ 29.648670] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
[ 29.648674] PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 23
[ 29.648678] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
[ 29.648682] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 29.648686] PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 21
[ 29.648690] PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 21
[ 29.664587] PCI: Bridge: 0000:00:01.0
[ 29.664594] IO window: c000-cfff
[ 29.664600] MEM window: ec000000-edffffff
[ 29.664604] PREFETCH window: e0000000-e7ffffff
[ 29.664610] PCI: Bridge: 0000:00:1e.0
[ 29.664614] IO window: a000-bfff
[ 29.664620] MEM window: ee000000-efffffff
[ 29.664626] PREFETCH window: 30000000-300fffff
[ 29.664650] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 29.664700] NET: Registered protocol family 2
[ 29.692398] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 29.692530] TCP established hash table entries: 16384 (order: 4,
65536 bytes)
[ 29.692624] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 29.692679] TCP: Hash tables configured (established 16384 bind 8192)
[ 29.692683] TCP reno registered
[ 29.704498] checking if image is initramfs... it is
[ 30.589971] Freeing initrd memory: 6672k freed
[ 30.590656] audit: initializing netlink socket (disabled)
[ 30.590684] audit(1173901486.772:1): initialized
[ 30.590890] VFS: Disk quotas dquot_6.5.1
[ 30.590925] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 30.591052] io scheduler noop registered
[ 30.591057] io scheduler anticipatory registered
[ 30.591059] io scheduler deadline registered
[ 30.591075] io scheduler cfq registered (default)
[ 30.591462] isapnp: Scanning for PnP cards...
[ 30.945192] isapnp: No Plug & Play device found
[ 31.025152] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 31.025309] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.025741] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 31.027338] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.028024] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 31.028591] mice: PS/2 mouse device common for all mice
[ 31.029412] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 31.029671] input: Macintosh mouse button emulation as
/class/input/input0
[ 31.029732] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.029739] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 31.030110] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 31.032916] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 31.032925] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 31.033122] EISA: Probing bus 0 at eisa.0
[ 31.033147] Cannot allocate resource for EISA slot 4
[ 31.033150] Cannot allocate resource for EISA slot 5
[ 31.033165] EISA: Detected 0 cards.
[ 31.033308] TCP cubic registered
[ 31.033327] NET: Registered protocol family 1
[ 31.033336] NET: Registered protocol family 8
[ 31.033338] NET: Registered protocol family 20
[ 31.033391] Using IPI Shortcut mode
[ 31.033430] Magic number: 15:731:748
[ 31.034301] Time: tsc clocksource has been installed.
[ 31.034526] Freeing unused kernel memory: 324k freed
[ 31.060782] input: AT Translated Set 2 keyboard as /class/input/input1
[ 32.530947] Capability LSM initialized
[ 32.625002] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 33.640591] usbcore: registered new interface driver usbfs
[ 33.640632] usbcore: registered new interface driver hub
[ 33.640682] usbcore: registered new device driver usb
[ 33.642221] USB Universal Host Controller Interface driver v3.0
[ 33.642330] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 33.642335] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 33.642593] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
bus number 1
[ 33.642636] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000
[ 33.642847] usb usb1: configuration #1 chosen from 1 choice
[ 33.642890] hub 1-0:1.0: USB hub found
[ 33.642905] hub 1-0:1.0: 2 ports detected
[ 33.707293] SCSI subsystem initialized
[ 33.715511] libata version 2.00 loaded.
[ 33.732227] Linux Tulip driver version 1.1.14 (December 15, 2004)
[ 33.746542] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 33.746550] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 33.746588] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned
bus number 2
[ 33.746624] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d800
[ 33.746776] usb usb2: configuration #1 chosen from 1 choice
[ 33.746816] hub 2-0:1.0: USB hub found
[ 33.746831] hub 2-0:1.0: 2 ports detected
[ 33.877549] Floppy drive(s): fd0 is 1.44M
[ 33.926133] ata_piix 0000:00:1f.1: version 2.00ac7
[ 33.926178] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 33.926324] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000
irq 14
[ 33.926388] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008
irq 15
[ 33.926412] scsi0 : ata_piix
[ 33.993985] FDC 0 is a post-1991 82077
[ 34.245729] ata1.00: ATAPI, max UDMA/33
[ 34.409478] ata1.01: ATAPI, max MWDMA2
[ 34.573238] ata1.00: configured for UDMA/33
[ 34.736993] ata1.01: configured for MWDMA2
[ 34.737023] scsi1 : ata_piix
[ 34.894993] scsi 0:0:0:0: CD-ROM HP DVD Writer 200j
1.36 PQ: 0 ANSI: 5
[ 34.896276] scsi 0:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH
A80 PQ: 0 ANSI: 5
[ 34.909780] tulip0: MII transceiver #1 config 1000 status 786d
advertising 05e1.
[ 34.917561] eth0: ADMtek Comet rev 17 at Port 0xb400,
00:04:5A:8A:55:7B, IRQ 21.
[ 34.917761] pata_pdc2027x 0000:02:01.0: version 0.74-ac5
[ 35.016968] pata_pdc2027x 0000:02:01.0: PLL input clock 16550 kHz
[ 35.051596] ata3: PATA max UDMA/133 cmd 0xE08297C0 ctl 0xE0829FDA
bmdma 0xE0829000 irq 21
[ 35.051661] ata4: PATA max UDMA/133 cmd 0xE08295C0 ctl 0xE0829DDA
bmdma 0xE0829008 irq 21
[ 35.051681] scsi2 : pata_pdc2027x
[ 35.082740] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 35.082749] Uniform CD-ROM driver Revision: 3.20
[ 35.083141] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 35.092019] sr1: scsi3-mmc drive: 231x/52x cd/rw xa/form2 cdda tray
[ 35.092385] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 35.099265] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 35.099296] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 35.212468] ata3.00: ATA-7, max UDMA/100, 234493056 sectors: LBA48
[ 35.212474] ata3.00: ata3: dev 0 multi count 16
[ 35.220438] ata3.01: ATA-7, max UDMA/133, 320173056 sectors: LBA48
[ 35.220441] ata3.01: ata3: dev 1 multi count 16
[ 35.228424] ata3.00: Host Protected Area detected:
[ 35.228426] current size: 234493056 sectors (120 GB)
[ 35.228427] native size: 274965953385600 sectors (140782568 GB)
[ 35.228431] ata3.00: configured for UDMA/100
[ 35.236410] ata3.01: configured for UDMA/133
[ 35.236440] scsi3 : pata_pdc2027x
[ 35.403177] ATA: abnormal status 0x8 on port 0xE08295DF
[ 35.404104] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1203N
TL10 PQ: 0 ANSI: 5
[ 35.404234] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 35.406414] scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y160P0
YAR4 PQ: 0 ANSI: 5
[ 35.406557] scsi 2:0:1:0: Attached scsi generic sg3 type 0
[ 35.428061] SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
[ 35.428121] sda: Write Protect is off
[ 35.428125] sda: Mode Sense: 00 3a 00 00
[ 35.428146] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.428249] SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
[ 35.428261] sda: Write Protect is off
[ 35.428264] sda: Mode Sense: 00 3a 00 00
[ 35.428283] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.428288] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 35.471341] sd 2:0:0:0: Attached scsi disk sda
[ 35.471701] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[ 35.471722] sdb: Write Protect is off
[ 35.471725] sdb: Mode Sense: 00 3a 00 00
[ 35.471745] SCSI device sdb: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.471835] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[ 35.471848] sdb: Write Protect is off
[ 35.471851] sdb: Mode Sense: 00 3a 00 00
[ 35.471869] SCSI device sdb: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.471874] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 35.505434] sd 2:0:1:0: Attached scsi disk sdb
[ 36.226710] Attempting manual resume
[ 36.226716] swsusp: Resume From Partition 8:6
[ 36.226718] PM: Checking swsusp image.
[ 36.226998] PM: Resume from disk failed.
[ 36.272428] kjournald starting. Commit interval 5 seconds
[ 36.272453] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.717504] NET: Registered protocol family 10
[ 43.717652] lo: Disabled Privacy Extensions
[ 45.315793] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 45.326258] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.383717] iTCO_vendor_support: vendor-support=0
[ 45.385484] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 45.385607] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled
by hardware
[ 45.385618] iTCO_wdt: No card detected
[ 45.528961] Linux agpgart interface v0.101 (c) Dave Jones
[ 45.538893] agpgart: Detected an Intel i845 Chipset.
[ 45.543002] agpgart: AGP aperture is 64M @ 0xe8000000
[ 45.658548] 0000:02:05.0: tulip_stop_rxtx() failed (CSR5 0xfc664010
CSR6 0xff972113)
[ 45.658562] eth0: Setting full-duplex based on MII#1 link partner
capability of 41e1.
[ 46.160206] Real Time Clock Driver v1.12ac
[ 46.409529] input: PC Speaker as /class/input/input2
[ 46.721256] parport: PnPBIOS parport detected.
[ 46.721325] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 46.970786] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 47.578596] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 47.893095] intel8x0_measure_ac97_clock: measured 54928 usecs
[ 47.893102] intel8x0: clocking to 48000
[ 54.519171] eth0: no IPv6 routers present
[ 65.095382] ata1.01: qc timeout (cmd 0xa0)
[ 65.095404] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 65.095409] ata1.01: (BMDMA stat 0x65)
[ 65.095417] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 65.095419] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 72.084934] ata1: port is slow to respond, please be patient (Status
0xd8)
[ 95.066527] ata1: port failed to respond (30 secs, Status 0xd8)
[ 95.066538] ata1: soft resetting port
[ 95.549849] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 95.549856] ata1.01: revalidation failed (errno=-5)
[ 95.549865] ata1: failed to recover some devices, retrying in 5 secs
[ 100.546369] ata1: soft resetting port
[ 101.193580] ata1.00: configured for UDMA/33
[ 101.357350] ata1.01: configured for MWDMA2
[ 101.357399] ata1: EH complete
[ 131.348286] ata1.01: qc timeout (cmd 0xa0)
[ 131.348308] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 131.348314] ata1.01: (BMDMA stat 0x65)
[ 131.348322] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 131.348324] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 138.337850] ata1: port is slow to respond, please be patient (Status
0xd8)
[ 161.319429] ata1: port failed to respond (30 secs, Status 0xd8)
[ 161.319440] ata1: soft resetting port
[ 161.802751] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 161.802759] ata1.01: revalidation failed (errno=-5)
[ 161.802767] ata1: failed to recover some devices, retrying in 5 secs
[ 166.799279] ata1: soft resetting port
[ 167.446501] ata1.00: configured for UDMA/33
[ 167.610263] ata1.01: configured for MWDMA2
[ 167.610309] ata1: EH complete
[ 197.581219] ata1.01: qc timeout (cmd 0xa0)
[ 197.581238] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 197.581243] ata1.01: (BMDMA stat 0x65)
[ 197.581251] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 197.581254] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 204.570799] ata1: port is slow to respond, please be patient (Status
0xd8)
[ 222.413761] fuse init (API version 7.8)
[ 222.455823] lp0: using parport0 (interrupt-driven).
[ 222.677756] it87: Found IT8712F chip at 0x290, revision 4
[ 222.682692] it87-isa 9191-0290: Detected broken BIOS defaults,
disabling PWM interface
[ 222.749640] Adding 1044184k swap on
/dev/disk/by-uuid/5c6a2d8c-54c1-44cb-8f1b-4a159373a120. Priority:-1
extents:1 across:1044184k
[ 222.988655] EXT3 FS on sda7, internal journal
[ 226.546597] kjournald starting. Commit interval 5 seconds
[ 226.546759] EXT3 FS on sda1, internal journal
[ 226.546768] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.572475] kjournald starting. Commit interval 5 seconds
[ 226.572662] EXT3 FS on sda3, internal journal
[ 226.572670] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.622569] kjournald starting. Commit interval 5 seconds
[ 226.622821] EXT3 FS on sdb5, internal journal
[ 226.622830] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.654728] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 226.722162] NTFS volume version 3.1.
[ 226.813689] kjournald starting. Commit interval 5 seconds
[ 226.813910] EXT3 FS on sdb6, internal journal
[ 226.813919] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.828535] kjournald starting. Commit interval 5 seconds
[ 226.828689] EXT3 FS on sda5, internal journal
[ 226.828697] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.859417] kjournald starting. Commit interval 5 seconds
[ 226.859590] EXT3 FS on sda2, internal journal
[ 226.859597] EXT3-fs: mounted filesystem with ordered data mode.
[ 227.560360] ata1: port failed to respond (30 secs, Status 0xd8)
[ 227.560371] ata1: soft resetting port
[ 228.043665] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 228.043672] ata1.01: revalidation failed (errno=-5)
[ 228.043680] ata1: failed to recover some devices, retrying in 5 secs
[ 228.815175] NET: Registered protocol family 17
[ 233.040220] ata1: soft resetting port
[ 233.679451] ata1.00: configured for UDMA/33
[ 233.843205] ata1.01: configured for MWDMA2
[ 233.843250] ata1: EH complete
[ 239.008402] ppdev: user-space parallel port driver
[ 241.617434] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 245.714461] [drm] Initialized drm 1.1.0 20060810
[ 245.764993] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 246.443254] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 246.443476] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 246.443667] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 246.734936] [drm] Setting GART location based on new memory map
[ 246.735007] [drm] writeback test succeeded in 1 usecs
[ 4906.833413] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 4907.027229] usb 2-2: configuration #1 chosen from 1 choice
[ 4907.568430] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4C11
[ 4907.569056] usbcore: registered new interface driver usblp
[ 4907.569339] drivers/usb/class/usblp.c: v0.13: USB Printer Device
Class driver
[ 4962.925328] drivers/usb/class/usblp.c: usblp0: removed
[ 8919.303864] usb 2-2: USB disconnect, address 2
[10872.570238] usb 2-2: new full speed USB device using uhci_hcd and
address 3
[10872.764030] usb 2-2: configuration #1 chosen from 1 choice
[10872.770976] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4C11
[10878.980584] drivers/usb/class/usblp.c: usblp0: removed
Regards,
Yarema
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-14 22:14 libata: CD and dvd devices not recognized YUP
@ 2007-03-15 3:56 ` Albert Lee
2007-03-15 13:11 ` YUP
0 siblings, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-15 3:56 UTC (permalink / raw)
To: YUP; +Cc: linux-ide
YUP wrote:
> Hello,
>
> I have the folowing problem. I'm running kubuntu box with
> 2.6.20-10 kernel with ubuntu patches and my cdrom as well as dvd drive
> doesn't recognized at all. I've already reported this on kubuntu forum,
> but nobody can answer me. The link is here:
> http://kubuntuforums.net/forums/index.php?topic=3080227.0
> I also tried to compile generic kernels from kernel.org with the same
> result. Can anybody say what is going on with my hardware or kernel?
> Before 2.6.20 everything ran smoothly.
>
>
> My latest dmesg output:
>
<snip>
> [ 33.707293] SCSI subsystem initialized
> [ 33.715511] libata version 2.00 loaded.
...
> [ 33.926133] ata_piix 0000:00:1f.1: version 2.00ac7
> [ 33.926178] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 33.926324] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000
> irq 14
> [ 33.926388] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008
> irq 15
> [ 33.926412] scsi0 : ata_piix
> [ 33.993985] FDC 0 is a post-1991 82077
> [ 34.245729] ata1.00: ATAPI, max UDMA/33
> [ 34.409478] ata1.01: ATAPI, max MWDMA2
> [ 34.573238] ata1.00: configured for UDMA/33
> [ 34.736993] ata1.01: configured for MWDMA2
> [ 34.737023] scsi1 : ata_piix
> [ 34.894993] scsi 0:0:0:0: CD-ROM HP DVD Writer 200j
> 1.36 PQ: 0 ANSI: 5
> [ 34.896276] scsi 0:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH
> A80 PQ: 0 ANSI: 5
> [ 34.909780] tulip0: MII transceiver #1 config 1000 status 786d
> advertising 05e1.
> [ 34.917561] eth0: ADMtek Comet rev 17 at Port 0xb400,
> 00:04:5A:8A:55:7B, IRQ 21.
> [ 34.917761] pata_pdc2027x 0000:02:01.0: version 0.74-ac5
> [ 35.016968] pata_pdc2027x 0000:02:01.0: PLL input clock 16550 kHz
> [ 35.051596] ata3: PATA max UDMA/133 cmd 0xE08297C0 ctl 0xE0829FDA
> bmdma 0xE0829000 irq 21
> [ 35.051661] ata4: PATA max UDMA/133 cmd 0xE08295C0 ctl 0xE0829DDA
> bmdma 0xE0829008 irq 21
> [ 35.051681] scsi2 : pata_pdc2027x
> [ 35.082740] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda
> tray
> [ 35.082749] Uniform CD-ROM driver Revision: 3.20
> [ 35.083141] sr 0:0:0:0: Attached scsi CD-ROM sr0
> [ 35.092019] sr1: scsi3-mmc drive: 231x/52x cd/rw xa/form2 cdda tray
> [ 35.092385] sr 0:0:1:0: Attached scsi CD-ROM sr1
> [ 35.099265] sr 0:0:0:0: Attached scsi generic sg0 type 5
> [ 35.099296] sr 0:0:1:0: Attached scsi generic sg1 type 5
Both your HP DVD Writer 200j and AOpen 56X/AKH are detected correctly
as sr0 and sr1. (It might be /dev/scd0 and /dev/scd1 on your distro.)
However, there are problems with the AOpen "E-IDE CD-ROM 56X/AKH"
drive. It reports the strange "231x" speed and later timeout on INQUIRY.
<snip>
> [ 65.095382] ata1.01: qc timeout (cmd 0xa0)
> [ 65.095404] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> frozen
> [ 65.095409] ata1.01: (BMDMA stat 0x65)
> [ 65.095417] ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0
> cdb 0x12 data 254 in
> [ 65.095419] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
> 0x5 (timeout)
> [ 72.084934] ata1: port is slow to respond, please be patient (Status
> 0xd8)
> [ 95.066527] ata1: port failed to respond (30 secs, Status 0xd8)
> [ 95.066538] ata1: soft resetting port
> [ 95.549849] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
> [ 95.549856] ata1.01: revalidation failed (errno=-5)
> [ 95.549865] ata1: failed to recover some devices, retrying in 5 secs
> [ 100.546369] ata1: soft resetting port
> [ 101.193580] ata1.00: configured for UDMA/33
> [ 101.357350] ata1.01: configured for MWDMA2
> [ 101.357399] ata1: EH complete
> [ 131.348286] ata1.01: qc timeout (cmd 0xa0)
> [ 131.348308] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Could you please replace the cable and/or connect the AOpen drive to
another PATA port and see if it makes the "qc timeout" go away, thanks.
--
Albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-15 3:56 ` Albert Lee
@ 2007-03-15 13:11 ` YUP
2007-03-15 17:32 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-15 13:11 UTC (permalink / raw)
To: albertl; +Cc: linux-ide
Hi Albert,
Thanks for quick answer.
>> [ 35.082749] Uniform CD-ROM driver Revision: 3.20
>> [ 35.083141] sr 0:0:0:0: Attached scsi CD-ROM sr0
>> [ 35.092019] sr1: scsi3-mmc drive: 231x/52x cd/rw xa/form2 cdda tray
>> [ 35.092385] sr 0:0:1:0: Attached scsi CD-ROM sr1
>> [ 35.099265] sr 0:0:0:0: Attached scsi generic sg0 type 5
>> [ 35.099296] sr 0:0:1:0: Attached scsi generic sg1 type 5
>
> Both your HP DVD Writer 200j and AOpen 56X/AKH are detected correctly
> as sr0 and sr1. (It might be /dev/scd0 and /dev/scd1 on your distro.)
>
> However, there are problems with the AOpen "E-IDE CD-ROM 56X/AKH"
> drive. It reports the strange "231x" speed and later timeout on INQUIRY.
I've seen that, but! I have no devices like /dev/sr0 and /dev/sr1 nor
/dev/scd0 and /dev/scd1.
>
> Could you please replace the cable and/or connect the AOpen drive to
> another PATA port and see if it makes the "qc timeout" go away, thanks.
I tried replace the cable with no result. The second experiment was
successful: I plugged DVD and cdrom separately to the different ports
(before they were on one cable as master and slave), this time dvd runs
well, but I can't see cdrom. I also tried play with master-slave,
different combination with different cables etc. Result is the same -
dvd is OK, cdrom causes annoying messages. Maybe something is wrong
with my cdrom. But under windows everything works fine... And with
2.6.18 kernel everything was fine.
Yarema
Here is my dmesg:
[ 0.000000] Linux version 2.6.20-10-386 (root@vernadsky) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Mar 11 23:59:49 UTC 2007 (Ubuntu
2.6.20-10.17-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size:
0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size:
0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size:
0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size:
000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size:
0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c80
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP (v000 GBT )
@ 0x000f6710
[ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x1fff6800
[ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT
0x0100000c) @ 0x00000000
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:1 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] Detected 1800.171 MHz processor.
[ 29.455466] Built 1 zonelists. Total pages: 130033
[ 29.455470] Kernel command line:
root=UUID=bdcb0225-6620-4d74-9fe5-2f008da464c7 ro quiet splash
[ 29.455717] mapped APIC to ffffd000 (fee00000)
[ 29.455721] mapped IOAPIC to ffffc000 (fec00000)
[ 29.455727] Enabling fast FPU save and restore... done.
[ 29.455731] Enabling unmasked SIMD FPU exception support... done.
[ 29.455756] Initializing CPU#0
[ 29.455875] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 29.457532] Console: colour VGA+ 80x25
[ 29.458199] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 29.458869] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 29.480398] Memory: 508900k/524224k available (1909k kernel code,
14664k reserved, 855k data, 324k init, 0k highmem)
[ 29.480412] virtual kernel memory layout:
[ 29.480414] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 29.480416] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 29.480418] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 29.480419] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 29.480421] .init : 0xc03b6000 - 0xc0407000 ( 324 kB)
[ 29.480423] .data : 0xc02dd483 - 0xc03b3434 ( 855 kB)
[ 29.480424] .text : 0xc0100000 - 0xc02dd483 (1909 kB)
[ 29.480429] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 29.559726] Calibrating delay using timer specific routine.. 3603.21
BogoMIPS (lpj=7206423)
[ 29.559776] Security Framework v1.0.0 initialized
[ 29.559787] SELinux: Disabled at boot.
[ 29.559803] Mount-cache hash table entries: 512
[ 29.559964] CPU: After generic identify, caps: 3febfbff 00000000
00000000 00000000 00000000 00000000 00000000
[ 29.559979] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 29.559982] CPU: L2 cache: 256K
[ 29.559985] CPU: After all inits, caps: 3febfbff 00000000 00000000
00003080 00000000 00000000 00000000
[ 29.560000] Compat vDSO mapped to ffffe000.
[ 29.560014] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
[ 29.560026] Checking 'hlt' instruction... OK.
[ 29.576433] Early unpacking initramfs... done
[ 30.020000] ExtINT not setup in hardware but reported by MP table
[ 30.020085] ENABLING IO-APIC IRQs
[ 30.020316] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 30.167137] Booting paravirtualized kernel on bare hardware
[ 30.167250] Time: 13:54:27 Date: 02/15/107
[ 30.167305] NET: Registered protocol family 16
[ 30.167496] EISA bus registered
[ 30.193128] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=2
[ 30.193132] PCI: Using configuration type 1
[ 30.193134] Setting up standard PCI resources
[ 30.199841] ACPI: Interpreter disabled.
[ 30.199849] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 30.199860] pnp: PnP ACPI: disabled
[ 30.199864] PnPBIOS: Scanning system for PnP BIOS support...
[ 30.199916] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc20
[ 30.199920] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc50, dseg
0xf0000
[ 30.201260] PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
[ 30.201341] PCI: Probing PCI hardware
[ 30.201348] PCI: Probing PCI hardware (bus 00)
[ 30.201613] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 30.201618] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 30.201987] Boot video device is 0000:01:00.0
[ 30.202228] PCI: Transparent bridge - 0000:00:1e.0
[ 30.203057] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
[ 30.203077] PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19
[ 30.203081] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
[ 30.203085] PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 23
[ 30.203089] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
[ 30.203093] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 30.203097] PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 21
[ 30.203101] PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 21
[ 30.219006] PCI: Bridge: 0000:00:01.0
[ 30.219012] IO window: c000-cfff
[ 30.219018] MEM window: ec000000-edffffff
[ 30.219023] PREFETCH window: e0000000-e7ffffff
[ 30.219029] PCI: Bridge: 0000:00:1e.0
[ 30.219033] IO window: a000-bfff
[ 30.219039] MEM window: ee000000-efffffff
[ 30.219044] PREFETCH window: 30000000-300fffff
[ 30.219069] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 30.219121] NET: Registered protocol family 2
[ 30.246800] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 30.246936] TCP established hash table entries: 16384 (order: 4,
65536 bytes)
[ 30.247030] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 30.247085] TCP: Hash tables configured (established 16384 bind 8192)
[ 30.247088] TCP reno registered
[ 30.258891] checking if image is initramfs... it is
[ 31.143842] Freeing initrd memory: 6672k freed
[ 31.144533] audit: initializing netlink socket (disabled)
[ 31.144561] audit(1173966867.768:1): initialized
[ 31.144772] VFS: Disk quotas dquot_6.5.1
[ 31.144806] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 31.144908] io scheduler noop registered
[ 31.144912] io scheduler anticipatory registered
[ 31.144915] io scheduler deadline registered
[ 31.144932] io scheduler cfq registered (default)
[ 31.145318] isapnp: Scanning for PnP cards...
[ 31.499036] isapnp: No Plug & Play device found
[ 31.579514] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 31.579672] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.580109] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 31.581783] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.582462] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 31.583028] mice: PS/2 mouse device common for all mice
[ 31.583803] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 31.584267] input: Macintosh mouse button emulation as
/class/input/input0
[ 31.584328] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.584335] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 31.584774] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 31.588348] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 31.588361] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 31.588632] EISA: Probing bus 0 at eisa.0
[ 31.588660] Cannot allocate resource for EISA slot 4
[ 31.588663] Cannot allocate resource for EISA slot 5
[ 31.588678] EISA: Detected 0 cards.
[ 31.588837] TCP cubic registered
[ 31.588856] NET: Registered protocol family 1
[ 31.588866] NET: Registered protocol family 8
[ 31.588868] NET: Registered protocol family 20
[ 31.588923] Using IPI Shortcut mode
[ 31.588962] Magic number: 15:376:938
[ 31.590013] Freeing unused kernel memory: 324k freed
[ 31.592694] Time: tsc clocksource has been installed.
[ 31.617427] input: AT Translated Set 2 keyboard as /class/input/input1
[ 33.117461] Capability LSM initialized
[ 33.211373] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 34.215236] SCSI subsystem initialized
[ 34.252968] libata version 2.00 loaded.
[ 34.255515] ata_piix 0000:00:1f.1: version 2.00ac7
[ 34.255556] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 34.255697] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000
irq 14
[ 34.255756] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008
irq 15
[ 34.255777] scsi0 : ata_piix
[ 34.296839] Linux Tulip driver version 1.1.14 (December 15, 2004)
[ 34.340884] usbcore: registered new interface driver usbfs
[ 34.340931] usbcore: registered new interface driver hub
[ 34.340971] usbcore: registered new device driver usb
[ 34.342547] USB Universal Host Controller Interface driver v3.0
[ 34.534069] Floppy drive(s): fd0 is 1.44M
[ 34.566101] FDC 0 is a post-1991 82077
[ 34.572543] ata1.00: ATAPI, max UDMA/33
[ 34.736223] ata1.00: configured for UDMA/33
[ 34.736252] scsi1 : ata_piix
[ 34.894233] scsi 0:0:0:0: CD-ROM HP DVD Writer 200j
1.36 PQ: 0 ANSI: 5
[ 34.900160] pata_pdc2027x 0000:02:01.0: version 0.74-ac5
[ 34.999368] pata_pdc2027x 0000:02:01.0: PLL input clock 16550 kHz
[ 35.029543] ata3: PATA max UDMA/133 cmd 0xE08617C0 ctl 0xE0861FDA
bmdma 0xE0861000 irq 21
[ 35.029600] ata4: PATA max UDMA/133 cmd 0xE08615C0 ctl 0xE0861DDA
bmdma 0xE0861008 irq 21
[ 35.029617] scsi2 : pata_pdc2027x
[ 35.048373] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 35.048383] Uniform CD-ROM driver Revision: 3.20
[ 35.048479] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 35.055422] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 35.191725] ata3.00: ATA-7, max UDMA/100, 234493056 sectors: LBA48
[ 35.191732] ata3.00: ata3: dev 0 multi count 16
[ 35.199693] ata3.01: ATA-7, max UDMA/133, 320173056 sectors: LBA48
[ 35.199697] ata3.01: ata3: dev 1 multi count 16
[ 35.207679] ata3.00: Host Protected Area detected:
[ 35.207681] current size: 234493056 sectors (120 GB)
[ 35.207683] native size: 274965953385600 sectors (140782568 GB)
[ 35.207687] ata3.00: configured for UDMA/100
[ 35.215664] ata3.01: configured for UDMA/133
[ 35.215694] scsi3 : pata_pdc2027x
[ 35.382452] ATA: abnormal status 0x7F on port 0xE08615DF
[ 35.393825] ATA: abnormal status 0x7F on port 0xE08615DF
[ 35.555096] ata4.01: ATAPI, max MWDMA2
[ 35.718854] ata4.01: configured for MWDMA2
[ 35.721044] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1203N
TL10 PQ: 0 ANSI: 5
[ 35.721824] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 35.722015] scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y160P0
YAR4 PQ: 0 ANSI: 5
[ 35.722742] scsi 2:0:1:0: Attached scsi generic sg2 type 0
[ 35.723427] scsi 3:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH
A80 PQ: 0 ANSI: 5
[ 35.732888] sr1: scsi3-mmc drive: 229x/52x cd/rw xa/form2 cdda tray
[ 35.733222] sr 3:0:1:0: Attached scsi CD-ROM sr1
[ 35.733642] sr 3:0:1:0: Attached scsi generic sg3 type 5
[ 35.734643] tulip0: MII transceiver #1 config 3100 status 7869
advertising 05e1.
[ 35.742236] eth0: ADMtek Comet rev 17 at Port 0xb400,
00:04:5A:8A:55:7B, IRQ 21.
[ 35.744659] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 35.744669] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 35.745018] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
bus number 1
[ 35.745060] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000
[ 35.745265] usb usb1: configuration #1 chosen from 1 choice
[ 35.745310] hub 1-0:1.0: USB hub found
[ 35.745325] hub 1-0:1.0: 2 ports detected
[ 35.774910] SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
[ 35.774980] sda: Write Protect is off
[ 35.774984] sda: Mode Sense: 00 3a 00 00
[ 35.775004] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.775115] SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
[ 35.775128] sda: Write Protect is off
[ 35.775132] sda: Mode Sense: 00 3a 00 00
[ 35.775151] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.775156] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 35.823059] sd 2:0:0:0: Attached scsi disk sda
[ 35.823396] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[ 35.823415] sdb: Write Protect is off
[ 35.823419] sdb: Mode Sense: 00 3a 00 00
[ 35.823437] SCSI device sdb: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.823529] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[ 35.823541] sdb: Write Protect is off
[ 35.823544] sdb: Mode Sense: 00 3a 00 00
[ 35.823562] SCSI device sdb: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 35.823567] sdb: sdb1 sdb2 sdb3 < sdb5<7>PCI: Setting latency timer
of device 0000:00:1f.4 to 64
[ 35.846562] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 35.846602] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned
bus number 2
[ 35.846639] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d800
[ 35.846796] usb usb2: configuration #1 chosen from 1 choice
[ 35.846837] hub 2-0:1.0: USB hub found
[ 35.846852] hub 2-0:1.0: 2 ports detected
[ 35.858930] sdb6 >
[ 35.860216] sd 2:0:1:0: Attached scsi disk sdb
[ 36.524306] kjournald starting. Commit interval 5 seconds
[ 36.524332] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.894970] NET: Registered protocol family 10
[ 43.895117] lo: Disabled Privacy Extensions
[ 45.335580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 45.345886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.511545] iTCO_vendor_support: vendor-support=0
[ 45.521224] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 45.521345] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled
by hardware
[ 45.521355] iTCO_wdt: No card detected
[ 45.809539] 0000:02:05.0: tulip_stop_rxtx() failed (CSR5 0xfc664010
CSR6 0xff972113)
[ 45.809553] eth0: Setting full-duplex based on MII#1 link partner
capability of 41e1.
[ 45.895396] Linux agpgart interface v0.101 (c) Dave Jones
[ 46.159436] agpgart: Detected an Intel i845 Chipset.
[ 46.163439] agpgart: AGP aperture is 64M @ 0xe8000000
[ 46.171919] Real Time Clock Driver v1.12ac
[ 46.865081] parport: PnPBIOS parport detected.
[ 46.865149] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 46.878482] input: PC Speaker as /class/input/input2
[ 46.975046] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 47.289213] intel8x0_measure_ac97_clock: measured 54646 usecs
[ 47.289220] intel8x0: clocking to 48000
[ 47.305146] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 54.442512] eth0: no IPv6 routers present
[ 65.749627] ata4.01: qc timeout (cmd 0xa0)
[ 65.749644] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 65.749656] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 65.749658] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 72.739179] ata4: port is slow to respond, please be patient (Status
0xd8)
[ 95.720773] ata4: port failed to respond (30 secs, Status 0xd8)
[ 95.720785] ata4: soft resetting port
[ 95.887933] ATA: abnormal status 0x7F on port 0xE08615DF
[ 95.899315] ATA: abnormal status 0x7F on port 0xE08615DF
[ 96.060304] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 96.060311] ata4.01: revalidation failed (errno=-5)
[ 96.060321] ata4: failed to recover some devices, retrying in 5 secs
[ 101.056818] ata4: soft resetting port
[ 101.223969] ATA: abnormal status 0x7F on port 0xE08615DF
[ 101.235354] ATA: abnormal status 0x7F on port 0xE08615DF
[ 101.560374] ata4.01: configured for MWDMA2
[ 101.560425] ata4: EH complete
[ 131.535236] ata4.01: qc timeout (cmd 0xa0)
[ 131.535253] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 131.535265] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 131.535268] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 138.524781] ata4: port is slow to respond, please be patient (Status
0xd8)
[ 161.506376] ata4: port failed to respond (30 secs, Status 0xd8)
[ 161.506387] ata4: soft resetting port
[ 161.673536] ATA: abnormal status 0x7F on port 0xE08615DF
[ 161.684917] ATA: abnormal status 0x7F on port 0xE08615DF
[ 161.845906] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 161.845913] ata4.01: revalidation failed (errno=-5)
[ 161.845923] ata4: failed to recover some devices, retrying in 5 secs
[ 166.842421] ata4: soft resetting port
[ 167.009572] ATA: abnormal status 0x7F on port 0xE08615DF
[ 167.020954] ATA: abnormal status 0x7F on port 0xE08615DF
[ 167.345977] ata4.01: configured for MWDMA2
[ 167.346031] ata4: EH complete
[ 197.308849] ata4.01: qc timeout (cmd 0xa0)
[ 197.308866] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 197.308927] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 197.308929] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 204.298412] ata4: port is slow to respond, please be patient (Status
0xd8)
[ 222.621206] fuse init (API version 7.8)
[ 222.668357] lp0: using parport0 (interrupt-driven).
[ 222.882014] it87: Found IT8712F chip at 0x290, revision 4
[ 222.886999] it87-isa 9191-0290: Detected broken BIOS defaults,
disabling PWM interface
[ 222.959348] Adding 1044184k swap on
/dev/disk/by-uuid/5c6a2d8c-54c1-44cb-8f1b-4a159373a120. Priority:-1
extents:1 across:1044184k
[ 223.209655] EXT3 FS on sda7, internal journal
[ 226.626339] kjournald starting. Commit interval 5 seconds
[ 226.626500] EXT3 FS on sda1, internal journal
[ 226.626507] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.652213] kjournald starting. Commit interval 5 seconds
[ 226.652396] EXT3 FS on sda3, internal journal
[ 226.652403] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.699841] kjournald starting. Commit interval 5 seconds
[ 226.700075] EXT3 FS on sdb5, internal journal
[ 226.700083] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.742721] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 226.807748] NTFS volume version 3.1.
[ 226.907585] kjournald starting. Commit interval 5 seconds
[ 226.907810] EXT3 FS on sdb6, internal journal
[ 226.907818] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.924917] kjournald starting. Commit interval 5 seconds
[ 226.925073] EXT3 FS on sda5, internal journal
[ 226.925080] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.955687] kjournald starting. Commit interval 5 seconds
[ 226.955847] EXT3 FS on sda2, internal journal
[ 226.955854] EXT3-fs: mounted filesystem with ordered data mode.
[ 227.280029] ata4: port failed to respond (30 secs, Status 0xd8)
[ 227.280106] ata4: soft resetting port
[ 227.447161] ATA: abnormal status 0x7F on port 0xE08615DF
[ 227.458549] ATA: abnormal status 0x7F on port 0xE08615DF
[ 227.619595] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 227.619602] ata4.01: revalidation failed (errno=-5)
[ 227.619676] ata4: failed to recover some devices, retrying in 5 secs
[ 228.961532] NET: Registered protocol family 17
[ 232.616042] ata4: soft resetting port
[ 232.783248] ATA: abnormal status 0x7F on port 0xE08615DF
[ 232.794665] ATA: abnormal status 0x7F on port 0xE08615DF
[ 233.119644] ata4.01: configured for MWDMA2
[ 233.119696] ata4: EH complete
[ 240.102736] ppdev: user-space parallel port driver
[ 242.695559] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 246.376081] [drm] Initialized drm 1.1.0 20060810
[ 246.436220] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 247.097487] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 247.097713] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 247.097907] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 247.397555] [drm] Setting GART location based on new memory map
[ 247.397628] [drm] writeback test succeeded in 1 usecs
[ 273.918469] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 273.918499] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 273.918519] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-15 13:11 ` YUP
@ 2007-03-15 17:32 ` Albert Lee
2007-03-16 10:16 ` YUP
0 siblings, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-15 17:32 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
YUP wrote:
> Hi Albert,
>
> Thanks for quick answer.
>
>>> [ 35.082749] Uniform CD-ROM driver Revision: 3.20
>>> [ 35.083141] sr 0:0:0:0: Attached scsi CD-ROM sr0
>>> [ 35.092019] sr1: scsi3-mmc drive: 231x/52x cd/rw xa/form2 cdda tray
>>> [ 35.092385] sr 0:0:1:0: Attached scsi CD-ROM sr1
>>> [ 35.099265] sr 0:0:0:0: Attached scsi generic sg0 type 5
>>> [ 35.099296] sr 0:0:1:0: Attached scsi generic sg1 type 5
>>
>>
>> Both your HP DVD Writer 200j and AOpen 56X/AKH are detected correctly
>> as sr0 and sr1. (It might be /dev/scd0 and /dev/scd1 on your distro.)
>>
>> However, there are problems with the AOpen "E-IDE CD-ROM 56X/AKH"
>> drive. It reports the strange "231x" speed and later timeout on INQUIRY.
>
>
> I've seen that, but! I have no devices like /dev/sr0 and /dev/sr1 nor
> /dev/scd0 and /dev/scd1.
>
>
Strange. But this is another problem. Let's focused on the "qc timeout"
problem first.
>>
>> Could you please replace the cable and/or connect the AOpen drive to
>> another PATA port and see if it makes the "qc timeout" go away, thanks.
>
>
> I tried replace the cable with no result. The second experiment was
> successful: I plugged DVD and cdrom separately to the different ports
> (before they were on one cable as master and slave), this time dvd runs
> well, but I can't see cdrom. I also tried play with master-slave,
> different combination with different cables etc. Result is the same -
> dvd is OK, cdrom causes annoying messages. Maybe something is wrong
> with my cdrom. But under windows everything works fine... And with
> 2.6.18 kernel everything was fine.
>
> Yarema
>
> Here is my dmesg:
>
<snip>
> [ 34.252968] libata version 2.00 loaded.
> [ 34.255515] ata_piix 0000:00:1f.1: version 2.00ac7
> [ 34.255556] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 34.255697] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000
> irq 14
> [ 34.255756] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008
> irq 15
> [ 34.255777] scsi0 : ata_piix
> [ 34.572543] ata1.00: ATAPI, max UDMA/33
> [ 34.736223] ata1.00: configured for UDMA/33
> [ 34.736252] scsi1 : ata_piix
> [ 34.894233] scsi 0:0:0:0: CD-ROM HP DVD Writer 200j
> 1.36 PQ: 0 ANSI: 5
> [ 34.900160] pata_pdc2027x 0000:02:01.0: version 0.74-ac5
> [ 34.999368] pata_pdc2027x 0000:02:01.0: PLL input clock 16550 kHz
> [ 35.029543] ata3: PATA max UDMA/133 cmd 0xE08617C0 ctl 0xE0861FDA
> bmdma 0xE0861000 irq 21
> [ 35.029600] ata4: PATA max UDMA/133 cmd 0xE08615C0 ctl 0xE0861DDA
> bmdma 0xE0861008 irq 21
> [ 35.029617] scsi2 : pata_pdc2027x
> [ 35.048373] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda
> tray
> [ 35.048383] Uniform CD-ROM driver Revision: 3.20
> [ 35.048479] sr 0:0:0:0: Attached scsi CD-ROM sr0
> [ 35.055422] sr 0:0:0:0: Attached scsi generic sg0 type 5
> [ 35.191725] ata3.00: ATA-7, max UDMA/100, 234493056 sectors: LBA48
> [ 35.191732] ata3.00: ata3: dev 0 multi count 16
> [ 35.199693] ata3.01: ATA-7, max UDMA/133, 320173056 sectors: LBA48
> [ 35.199697] ata3.01: ata3: dev 1 multi count 16
> [ 35.207679] ata3.00: Host Protected Area detected:
> [ 35.207681] current size: 234493056 sectors (120 GB)
> [ 35.207683] native size: 274965953385600 sectors (140782568 GB)
> [ 35.207687] ata3.00: configured for UDMA/100
> [ 35.215664] ata3.01: configured for UDMA/133
> [ 35.215694] scsi3 : pata_pdc2027x
> [ 35.382452] ATA: abnormal status 0x7F on port 0xE08615DF
> [ 35.393825] ATA: abnormal status 0x7F on port 0xE08615DF
> [ 35.555096] ata4.01: ATAPI, max MWDMA2
> [ 35.718854] ata4.01: configured for MWDMA2
> [ 35.721044] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1203N
> TL10 PQ: 0 ANSI: 5
> [ 35.721824] scsi 2:0:0:0: Attached scsi generic sg1 type 0
> [ 35.722015] scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y160P0
> YAR4 PQ: 0 ANSI: 5
> [ 35.722742] scsi 2:0:1:0: Attached scsi generic sg2 type 0
> [ 35.723427] scsi 3:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH
> A80 PQ: 0 ANSI: 5
> [ 35.732888] sr1: scsi3-mmc drive: 229x/52x cd/rw xa/form2 cdda tray
> [ 35.733222] sr 3:0:1:0: Attached scsi CD-ROM sr1
> [ 35.733642] sr 3:0:1:0: Attached scsi generic sg3 type 5
It was "sr1: scsi3-mmc drive: 231x/52x cd/rw xa/form2 cdda tray" and
this time it's "229x/52x"... Looks like one bit of data is changed.
Maybe signal interference?
<snip>
> [ 65.749627] ata4.01: qc timeout (cmd 0xa0)
> [ 65.749644] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> frozen
> [ 65.749656] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
> cdb 0x12 data 254 in
> [ 65.749658] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
> 0x5 (timeout)
> [ 72.739179] ata4: port is slow to respond, please be patient (Status
> 0xd8)
> [ 95.720773] ata4: port failed to respond (30 secs, Status 0xd8)
> [ 95.720785] ata4: soft resetting port
> [ 95.887933] ATA: abnormal status 0x7F on port 0xE08615DF
> [ 95.899315] ATA: abnormal status 0x7F on port 0xE08615DF
> [ 96.060304] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
> [ 96.060311] ata4.01: revalidation failed (errno=-5)
> [ 96.060321] ata4: failed to recover some devices, retrying in 5 secs
> [ 101.056818] ata4: soft resetting port
I still have no clue what caused "qc timeout" here.
Could you please try:
1. Apply the attached HSM debug patch to mainline 2.6.20.3 kernel
and post the dmesg for debugging.
2. Turn off ATAPI DMA by adding one line of
{ "CD-ROM 56X/AKH", NULL, ATA_HORKAGE_NODMA },
to ata_device_blacklist[] and see if it helps.
Thanks.
--
albert
--- linux-2.6.20.3/drivers/ata/libata-core.c 2007-03-15 12:13:12.000000000 +0800
+++ linux-2.6.20.3-mod/drivers/ata/libata-core.c 2007-03-15 12:13:55.000000000 +0800
@@ -4371,8 +4371,9 @@ int ata_hsm_move(struct ata_port *ap, st
WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
fsm_start:
- DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+ if (is_atapi_taskfile(&qc->tf))
+ printk(KERN_ERR "ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state, status);
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -5091,8 +5092,9 @@ inline unsigned int ata_host_intr (struc
struct ata_eh_info *ehi = &ap->eh_info;
u8 status, host_stat = 0;
- VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state);
+ if (is_atapi_taskfile(&qc->tf))
+ printk(KERN_ERR "ata%u: protocol %d task_state %d\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state);
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-15 17:32 ` Albert Lee
@ 2007-03-16 10:16 ` YUP
2007-03-16 15:06 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-16 10:16 UTC (permalink / raw)
To: albertl; +Cc: linux-ide
[-- Attachment #1: Type: text/plain, Size: 207 bytes --]
Hi Albert,
> 2. Turn off ATAPI DMA by adding one line of
> { "CD-ROM 56X/AKH", NULL, ATA_HORKAGE_NODMA },
> to ata_device_blacklist[] and see if it helps.
>
Here is dmesg with blacklisted cdrom:
[-- Attachment #2: blacklisted_cdrom --]
[-- Type: text/plain, Size: 67460 bytes --]
[ 0.000000] Linux version 2.6.20.3 (root@zaraza) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 Thu Mar 15 23:53:58 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c80
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f6710
[ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6800
[ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:1 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1800.150 MHz processor.
[ 21.864686] Built 1 zonelists. Total pages: 130033
[ 21.864689] Kernel command line: root=UUID=bdcb0225-6620-4d74-9fe5-2f008da464c7 ro quiet splash
[ 21.864936] mapped APIC to ffffd000 (fee00000)
[ 21.864939] mapped IOAPIC to ffffc000 (fec00000)
[ 21.864945] Enabling fast FPU save and restore... done.
[ 21.864949] Enabling unmasked SIMD FPU exception support... done.
[ 21.864972] Initializing CPU#0
[ 21.865093] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 21.866773] Console: colour VGA+ 80x25
[ 21.867436] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.868110] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.889292] Memory: 474608k/524224k available (1902k kernel code, 49000k reserved, 850k data, 320k init, 0k highmem)
[ 21.889305] virtual kernel memory layout:
[ 21.889307] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 21.889309] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.889311] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 21.889312] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 21.889314] .init : 0xc03b4000 - 0xc0404000 ( 320 kB)
[ 21.889316] .data : 0xc02db893 - 0xc03b0434 ( 850 kB)
[ 21.889318] .text : 0xc0100000 - 0xc02db893 (1902 kB)
[ 21.889322] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.968944] Calibrating delay using timer specific routine.. 3603.21 BogoMIPS (lpj=7206428)
[ 21.968995] Security Framework v1.0.0 initialized
[ 21.969005] SELinux: Disabled at boot.
[ 21.969022] Mount-cache hash table entries: 512
[ 21.969183] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 21.969199] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 21.969202] CPU: L2 cache: 256K
[ 21.969204] CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000
[ 21.969235] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
[ 21.969247] Checking 'hlt' instruction... OK.
[ 21.985616] ExtINT not setup in hardware but reported by MP table
[ 21.985701] ENABLING IO-APIC IRQs
[ 21.985938] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 22.132798] PM: Adding info for No Bus:platform
[ 22.133043] Booting paravirtualized kernel on bare hardware
[ 22.133162] Time: 11:08:06 Date: 02/16/107
[ 22.133223] NET: Registered protocol family 16
[ 22.133276] PM: Adding info for No Bus:vtcon0
[ 22.133418] EISA bus registered
[ 22.159055] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=2
[ 22.159059] PCI: Using configuration type 1
[ 22.159062] Setting up standard PCI resources
[ 22.165748] ACPI: Interpreter disabled.
[ 22.165758] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.165780] pnp: PnP ACPI: disabled
[ 22.165785] PnPBIOS: Scanning system for PnP BIOS support...
[ 22.165838] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc20
[ 22.165842] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc50, dseg 0xf0000
[ 22.165858] PM: Adding info for No Bus:pnp0
[ 22.165892] PM: Adding info for pnp:00:00
[ 22.166002] PM: Adding info for pnp:00:01
[ 22.166061] PM: Adding info for pnp:00:02
[ 22.166117] PM: Adding info for pnp:00:03
[ 22.166167] PM: Adding info for pnp:00:04
[ 22.166237] PM: Adding info for pnp:00:05
[ 22.166293] PM: Adding info for pnp:00:06
[ 22.166347] PM: Adding info for pnp:00:07
[ 22.166405] PM: Adding info for pnp:00:08
[ 22.166459] PM: Adding info for pnp:00:09
[ 22.166510] PM: Adding info for pnp:00:0a
[ 22.166581] PM: Adding info for pnp:00:0b
[ 22.166678] PM: Adding info for pnp:00:0c
[ 22.166758] PM: Adding info for pnp:00:0d
[ 22.166864] PM: Adding info for pnp:00:0f
[ 22.166961] PM: Adding info for pnp:00:10
[ 22.167051] PM: Adding info for pnp:00:11
[ 22.167138] PM: Adding info for pnp:00:12
[ 22.167195] PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
[ 22.167270] PCI: Probing PCI hardware
[ 22.167278] PCI: Probing PCI hardware (bus 00)
[ 22.167290] PM: Adding info for No Bus:pci0000:00
[ 22.167557] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 22.167562] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 22.167929] Boot video device is 0000:01:00.0
[ 22.168168] PCI: Transparent bridge - 0000:00:1e.0
[ 22.168198] PM: Adding info for pci:0000:00:00.0
[ 22.168270] PM: Adding info for pci:0000:00:01.0
[ 22.168332] PM: Adding info for pci:0000:00:1e.0
[ 22.168385] PM: Adding info for pci:0000:00:1f.0
[ 22.168443] PM: Adding info for pci:0000:00:1f.1
[ 22.168512] PM: Adding info for pci:0000:00:1f.2
[ 22.168569] PM: Adding info for pci:0000:00:1f.3
[ 22.168633] PM: Adding info for pci:0000:00:1f.4
[ 22.168717] PM: Adding info for pci:0000:00:1f.5
[ 22.168779] PM: Adding info for pci:0000:01:00.0
[ 22.168850] PM: Adding info for pci:0000:02:01.0
[ 22.168909] PM: Adding info for pci:0000:02:05.0
[ 22.169069] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
[ 22.169090] PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19
[ 22.169095] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
[ 22.169099] PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 23
[ 22.169103] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
[ 22.169107] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 22.169111] PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 21
[ 22.169115] PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 21
[ 22.184378] NET: Registered protocol family 8
[ 22.184382] NET: Registered protocol family 20
[ 22.184554] PM: Adding info for No Bus:mem
[ 22.184612] PM: Adding info for No Bus:kmem
[ 22.184670] PM: Adding info for No Bus:null
[ 22.184708] PM: Adding info for No Bus:port
[ 22.184761] PM: Adding info for No Bus:zero
[ 22.184801] PM: Adding info for No Bus:full
[ 22.184839] PM: Adding info for No Bus:random
[ 22.184878] PM: Adding info for No Bus:urandom
[ 22.184916] PM: Adding info for No Bus:kmsg
[ 22.184954] PM: Adding info for No Bus:oldmem
[ 22.185035] PCI: Bridge: 0000:00:01.0
[ 22.185040] IO window: c000-cfff
[ 22.185045] MEM window: ec000000-edffffff
[ 22.185050] PREFETCH window: e0000000-e7ffffff
[ 22.185056] PCI: Bridge: 0000:00:1e.0
[ 22.185059] IO window: a000-bfff
[ 22.185065] MEM window: ee000000-efffffff
[ 22.185071] PREFETCH window: 30000000-300fffff
[ 22.185094] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 22.185148] NET: Registered protocol family 2
[ 22.212687] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 22.212826] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 22.212918] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 22.212965] TCP: Hash tables configured (established 16384 bind 8192)
[ 22.212969] TCP reno registered
[ 22.224797] checking if image is initramfs... it is
[ 27.706647] Freeing initrd memory: 41023k freed
[ 27.706942] PM: Adding info for platform:pcspkr
[ 27.707338] PM: Adding info for No Bus:snapshot
[ 27.707384] audit: initializing netlink socket (disabled)
[ 27.707410] audit(1174043291.932:1): initialized
[ 27.707618] VFS: Disk quotas dquot_6.5.1
[ 27.707654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.707754] io scheduler noop registered
[ 27.707759] io scheduler anticipatory registered
[ 27.707762] io scheduler deadline registered
[ 27.707778] io scheduler cfq registered (default)
[ 27.708180] PM: Adding info for No Bus:pnp1
[ 27.708189] isapnp: Scanning for PnP cards...
[ 28.061919] isapnp: No Plug & Play device found
[ 28.061947] PM: Adding info for No Bus:tty
[ 28.062012] PM: Adding info for No Bus:console
[ 28.062055] PM: Adding info for No Bus:ptmx
[ 28.062095] PM: Adding info for No Bus:tty0
[ 28.062158] PM: Adding info for No Bus:vcs
[ 28.062209] PM: Adding info for No Bus:vcsa
[ 28.062261] PM: Adding info for No Bus:tty1
[ 28.062301] PM: Adding info for No Bus:tty2
[ 28.062341] PM: Adding info for No Bus:tty3
[ 28.062382] PM: Adding info for No Bus:tty4
[ 28.062422] PM: Adding info for No Bus:tty5
[ 28.062460] PM: Adding info for No Bus:tty6
[ 28.062509] PM: Adding info for No Bus:tty7
[ 28.062547] PM: Adding info for No Bus:tty8
[ 28.062593] PM: Adding info for No Bus:tty9
[ 28.062634] PM: Adding info for No Bus:tty10
[ 28.062679] PM: Adding info for No Bus:tty11
[ 28.062719] PM: Adding info for No Bus:tty12
[ 28.062770] PM: Adding info for No Bus:tty13
[ 28.062813] PM: Adding info for No Bus:tty14
[ 28.062855] PM: Adding info for No Bus:tty15
[ 28.062894] PM: Adding info for No Bus:tty16
[ 28.062937] PM: Adding info for No Bus:tty17
[ 28.062978] PM: Adding info for No Bus:tty18
[ 28.063020] PM: Adding info for No Bus:tty19
[ 28.063074] PM: Adding info for No Bus:tty20
[ 28.063113] PM: Adding info for No Bus:tty21
[ 28.063155] PM: Adding info for No Bus:tty22
[ 28.063201] PM: Adding info for No Bus:tty23
[ 28.063243] PM: Adding info for No Bus:tty24
[ 28.063284] PM: Adding info for No Bus:tty25
[ 28.063333] PM: Adding info for No Bus:tty26
[ 28.063376] PM: Adding info for No Bus:tty27
[ 28.063417] PM: Adding info for No Bus:tty28
[ 28.063464] PM: Adding info for No Bus:tty29
[ 28.063508] PM: Adding info for No Bus:tty30
[ 28.063553] PM: Adding info for No Bus:tty31
[ 28.063597] PM: Adding info for No Bus:tty32
[ 28.063651] PM: Adding info for No Bus:tty33
[ 28.063691] PM: Adding info for No Bus:tty34
[ 28.063739] PM: Adding info for No Bus:tty35
[ 28.063782] PM: Adding info for No Bus:tty36
[ 28.063843] PM: Adding info for No Bus:tty37
[ 28.063907] PM: Adding info for No Bus:tty38
[ 28.063965] PM: Adding info for No Bus:tty39
[ 28.064013] PM: Adding info for No Bus:tty40
[ 28.064060] PM: Adding info for No Bus:tty41
[ 28.064103] PM: Adding info for No Bus:tty42
[ 28.064147] PM: Adding info for No Bus:tty43
[ 28.064193] PM: Adding info for No Bus:tty44
[ 28.064238] PM: Adding info for No Bus:tty45
[ 28.064292] PM: Adding info for No Bus:tty46
[ 28.064342] PM: Adding info for No Bus:tty47
[ 28.064389] PM: Adding info for No Bus:tty48
[ 28.064439] PM: Adding info for No Bus:tty49
[ 28.064490] PM: Adding info for No Bus:tty50
[ 28.064537] PM: Adding info for No Bus:tty51
[ 28.064592] PM: Adding info for No Bus:tty52
[ 28.064642] PM: Adding info for No Bus:tty53
[ 28.064687] PM: Adding info for No Bus:tty54
[ 28.064733] PM: Adding info for No Bus:tty55
[ 28.064778] PM: Adding info for No Bus:tty56
[ 28.064829] PM: Adding info for No Bus:tty57
[ 28.064877] PM: Adding info for No Bus:tty58
[ 28.064944] PM: Adding info for No Bus:tty59
[ 28.064990] PM: Adding info for No Bus:tty60
[ 28.065035] PM: Adding info for No Bus:tty61
[ 28.065083] PM: Adding info for No Bus:tty62
[ 28.065130] PM: Adding info for No Bus:tty63
[ 28.065265] PM: Adding info for No Bus:ptyp0
[ 28.065336] PM: Adding info for No Bus:ptyp1
[ 28.065384] PM: Adding info for No Bus:ptyp2
[ 28.065432] PM: Adding info for No Bus:ptyp3
[ 28.065481] PM: Adding info for No Bus:ptyp4
[ 28.065530] PM: Adding info for No Bus:ptyp5
[ 28.065577] PM: Adding info for No Bus:ptyp6
[ 28.065630] PM: Adding info for No Bus:ptyp7
[ 28.065688] PM: Adding info for No Bus:ptyp8
[ 28.065737] PM: Adding info for No Bus:ptyp9
[ 28.065785] PM: Adding info for No Bus:ptypa
[ 28.065835] PM: Adding info for No Bus:ptypb
[ 28.065881] PM: Adding info for No Bus:ptypc
[ 28.065932] PM: Adding info for No Bus:ptypd
[ 28.065993] PM: Adding info for No Bus:ptype
[ 28.066047] PM: Adding info for No Bus:ptypf
[ 28.066099] PM: Adding info for No Bus:ptyq0
[ 28.066149] PM: Adding info for No Bus:ptyq1
[ 28.066197] PM: Adding info for No Bus:ptyq2
[ 28.066254] PM: Adding info for No Bus:ptyq3
[ 28.066307] PM: Adding info for No Bus:ptyq4
[ 28.066370] PM: Adding info for No Bus:ptyq5
[ 28.066421] PM: Adding info for No Bus:ptyq6
[ 28.066469] PM: Adding info for No Bus:ptyq7
[ 28.066517] PM: Adding info for No Bus:ptyq8
[ 28.066568] PM: Adding info for No Bus:ptyq9
[ 28.066617] PM: Adding info for No Bus:ptyqa
[ 28.066679] PM: Adding info for No Bus:ptyqb
[ 28.066730] PM: Adding info for No Bus:ptyqc
[ 28.066781] PM: Adding info for No Bus:ptyqd
[ 28.066830] PM: Adding info for No Bus:ptyqe
[ 28.066891] PM: Adding info for No Bus:ptyqf
[ 28.066941] PM: Adding info for No Bus:ptyr0
[ 28.066991] PM: Adding info for No Bus:ptyr1
[ 28.067055] PM: Adding info for No Bus:ptyr2
[ 28.067112] PM: Adding info for No Bus:ptyr3
[ 28.067164] PM: Adding info for No Bus:ptyr4
[ 28.067218] PM: Adding info for No Bus:ptyr5
[ 28.067268] PM: Adding info for No Bus:ptyr6
[ 28.067318] PM: Adding info for No Bus:ptyr7
[ 28.067385] PM: Adding info for No Bus:ptyr8
[ 28.067449] PM: Adding info for No Bus:ptyr9
[ 28.067504] PM: Adding info for No Bus:ptyra
[ 28.067566] PM: Adding info for No Bus:ptyrb
[ 28.067618] PM: Adding info for No Bus:ptyrc
[ 28.067673] PM: Adding info for No Bus:ptyrd
[ 28.067728] PM: Adding info for No Bus:ptyre
[ 28.067795] PM: Adding info for No Bus:ptyrf
[ 28.067919] PM: Adding info for No Bus:ptys0
[ 28.067979] PM: Adding info for No Bus:ptys1
[ 28.068032] PM: Adding info for No Bus:ptys2
[ 28.068087] PM: Adding info for No Bus:ptys3
[ 28.068141] PM: Adding info for No Bus:ptys4
[ 28.068202] PM: Adding info for No Bus:ptys5
[ 28.068258] PM: Adding info for No Bus:ptys6
[ 28.068319] PM: Adding info for No Bus:ptys7
[ 28.068371] PM: Adding info for No Bus:ptys8
[ 28.068423] PM: Adding info for No Bus:ptys9
[ 28.068479] PM: Adding info for No Bus:ptysa
[ 28.068536] PM: Adding info for No Bus:ptysb
[ 28.068607] PM: Adding info for No Bus:ptysc
[ 28.068666] PM: Adding info for No Bus:ptysd
[ 28.068721] PM: Adding info for No Bus:ptyse
[ 28.068778] PM: Adding info for No Bus:ptysf
[ 28.068836] PM: Adding info for No Bus:ptyt0
[ 28.068892] PM: Adding info for No Bus:ptyt1
[ 28.068954] PM: Adding info for No Bus:ptyt2
[ 28.069019] PM: Adding info for No Bus:ptyt3
[ 28.069075] PM: Adding info for No Bus:ptyt4
[ 28.069133] PM: Adding info for No Bus:ptyt5
[ 28.069190] PM: Adding info for No Bus:ptyt6
[ 28.069253] PM: Adding info for No Bus:ptyt7
[ 28.069310] PM: Adding info for No Bus:ptyt8
[ 28.069385] PM: Adding info for No Bus:ptyt9
[ 28.069441] PM: Adding info for No Bus:ptyta
[ 28.069504] PM: Adding info for No Bus:ptytb
[ 28.069565] PM: Adding info for No Bus:ptytc
[ 28.069624] PM: Adding info for No Bus:ptytd
[ 28.069682] PM: Adding info for No Bus:ptyte
[ 28.069759] PM: Adding info for No Bus:ptytf
[ 28.069821] PM: Adding info for No Bus:ptyu0
[ 28.069878] PM: Adding info for No Bus:ptyu1
[ 28.069942] PM: Adding info for No Bus:ptyu2
[ 28.070003] PM: Adding info for No Bus:ptyu3
[ 28.070063] PM: Adding info for No Bus:ptyu4
[ 28.070127] PM: Adding info for No Bus:ptyu5
[ 28.070203] PM: Adding info for No Bus:ptyu6
[ 28.070265] PM: Adding info for No Bus:ptyu7
[ 28.070333] PM: Adding info for No Bus:ptyu8
[ 28.070396] PM: Adding info for No Bus:ptyu9
[ 28.070457] PM: Adding info for No Bus:ptyua
[ 28.070529] PM: Adding info for No Bus:ptyub
[ 28.070602] PM: Adding info for No Bus:ptyuc
[ 28.070668] PM: Adding info for No Bus:ptyud
[ 28.070738] PM: Adding info for No Bus:ptyue
[ 28.070805] PM: Adding info for No Bus:ptyuf
[ 28.070867] PM: Adding info for No Bus:ptyv0
[ 28.070934] PM: Adding info for No Bus:ptyv1
[ 28.070997] PM: Adding info for No Bus:ptyv2
[ 28.071082] PM: Adding info for No Bus:ptyv3
[ 28.071153] PM: Adding info for No Bus:ptyv4
[ 28.071221] PM: Adding info for No Bus:ptyv5
[ 28.071284] PM: Adding info for No Bus:ptyv6
[ 28.071354] PM: Adding info for No Bus:ptyv7
[ 28.071464] PM: Adding info for No Bus:ptyv8
[ 28.071551] PM: Adding info for No Bus:ptyv9
[ 28.071619] PM: Adding info for No Bus:ptyva
[ 28.071686] PM: Adding info for No Bus:ptyvb
[ 28.071749] PM: Adding info for No Bus:ptyvc
[ 28.071866] PM: Adding info for No Bus:ptyvd
[ 28.071959] PM: Adding info for No Bus:ptyve
[ 28.072023] PM: Adding info for No Bus:ptyvf
[ 28.072102] PM: Adding info for No Bus:ptyw0
[ 28.072167] PM: Adding info for No Bus:ptyw1
[ 28.072233] PM: Adding info for No Bus:ptyw2
[ 28.072303] PM: Adding info for No Bus:ptyw3
[ 28.072366] PM: Adding info for No Bus:ptyw4
[ 28.072430] PM: Adding info for No Bus:ptyw5
[ 28.072510] PM: Adding info for No Bus:ptyw6
[ 28.072583] PM: Adding info for No Bus:ptyw7
[ 28.072656] PM: Adding info for No Bus:ptyw8
[ 28.072729] PM: Adding info for No Bus:ptyw9
[ 28.072795] PM: Adding info for No Bus:ptywa
[ 28.072867] PM: Adding info for No Bus:ptywb
[ 28.072939] PM: Adding info for No Bus:ptywc
[ 28.073024] PM: Adding info for No Bus:ptywd
[ 28.073095] PM: Adding info for No Bus:ptywe
[ 28.073178] PM: Adding info for No Bus:ptywf
[ 28.073252] PM: Adding info for No Bus:ptyx0
[ 28.073322] PM: Adding info for No Bus:ptyx1
[ 28.073393] PM: Adding info for No Bus:ptyx2
[ 28.073481] PM: Adding info for No Bus:ptyx3
[ 28.073556] PM: Adding info for No Bus:ptyx4
[ 28.073630] PM: Adding info for No Bus:ptyx5
[ 28.073700] PM: Adding info for No Bus:ptyx6
[ 28.073770] PM: Adding info for No Bus:ptyx7
[ 28.073844] PM: Adding info for No Bus:ptyx8
[ 28.073917] PM: Adding info for No Bus:ptyx9
[ 28.074001] PM: Adding info for No Bus:ptyxa
[ 28.074086] PM: Adding info for No Bus:ptyxb
[ 28.074160] PM: Adding info for No Bus:ptyxc
[ 28.074230] PM: Adding info for No Bus:ptyxd
[ 28.074306] PM: Adding info for No Bus:ptyxe
[ 28.074379] PM: Adding info for No Bus:ptyxf
[ 28.074459] PM: Adding info for No Bus:ptyy0
[ 28.074541] PM: Adding info for No Bus:ptyy1
[ 28.074620] PM: Adding info for No Bus:ptyy2
[ 28.074702] PM: Adding info for No Bus:ptyy3
[ 28.074784] PM: Adding info for No Bus:ptyy4
[ 28.074855] PM: Adding info for No Bus:ptyy5
[ 28.074931] PM: Adding info for No Bus:ptyy6
[ 28.075032] PM: Adding info for No Bus:ptyy7
[ 28.075111] PM: Adding info for No Bus:ptyy8
[ 28.075191] PM: Adding info for No Bus:ptyy9
[ 28.075276] PM: Adding info for No Bus:ptyya
[ 28.075362] PM: Adding info for No Bus:ptyyb
[ 28.075498] PM: Adding info for No Bus:ptyyc
[ 28.075594] PM: Adding info for No Bus:ptyyd
[ 28.075681] PM: Adding info for No Bus:ptyye
[ 28.075761] PM: Adding info for No Bus:ptyyf
[ 28.075926] PM: Adding info for No Bus:ptyz0
[ 28.076021] PM: Adding info for No Bus:ptyz1
[ 28.076112] PM: Adding info for No Bus:ptyz2
[ 28.076212] PM: Adding info for No Bus:ptyz3
[ 28.076312] PM: Adding info for No Bus:ptyz4
[ 28.076399] PM: Adding info for No Bus:ptyz5
[ 28.076487] PM: Adding info for No Bus:ptyz6
[ 28.076569] PM: Adding info for No Bus:ptyz7
[ 28.076654] PM: Adding info for No Bus:ptyz8
[ 28.076752] PM: Adding info for No Bus:ptyz9
[ 28.076855] PM: Adding info for No Bus:ptyza
[ 28.076949] PM: Adding info for No Bus:ptyzb
[ 28.077034] PM: Adding info for No Bus:ptyzc
[ 28.077118] PM: Adding info for No Bus:ptyzd
[ 28.077202] PM: Adding info for No Bus:ptyze
[ 28.077291] PM: Adding info for No Bus:ptyzf
[ 28.077375] PM: Adding info for No Bus:ptya0
[ 28.077476] PM: Adding info for No Bus:ptya1
[ 28.077567] PM: Adding info for No Bus:ptya2
[ 28.077657] PM: Adding info for No Bus:ptya3
[ 28.077745] PM: Adding info for No Bus:ptya4
[ 28.077836] PM: Adding info for No Bus:ptya5
[ 28.077925] PM: Adding info for No Bus:ptya6
[ 28.078025] PM: Adding info for No Bus:ptya7
[ 28.078125] PM: Adding info for No Bus:ptya8
[ 28.078218] PM: Adding info for No Bus:ptya9
[ 28.078314] PM: Adding info for No Bus:ptyaa
[ 28.078419] PM: Adding info for No Bus:ptyab
[ 28.078516] PM: Adding info for No Bus:ptyac
[ 28.078616] PM: Adding info for No Bus:ptyad
[ 28.078730] PM: Adding info for No Bus:ptyae
[ 28.078827] PM: Adding info for No Bus:ptyaf
[ 28.078921] PM: Adding info for No Bus:ptyb0
[ 28.079022] PM: Adding info for No Bus:ptyb1
[ 28.079114] PM: Adding info for No Bus:ptyb2
[ 28.079210] PM: Adding info for No Bus:ptyb3
[ 28.079323] PM: Adding info for No Bus:ptyb4
[ 28.079475] PM: Adding info for No Bus:ptyb5
[ 28.079586] PM: Adding info for No Bus:ptyb6
[ 28.079702] PM: Adding info for No Bus:ptyb7
[ 28.079866] PM: Adding info for No Bus:ptyb8
[ 28.079995] PM: Adding info for No Bus:ptyb9
[ 28.080104] PM: Adding info for No Bus:ptyba
[ 28.080230] PM: Adding info for No Bus:ptybb
[ 28.080338] PM: Adding info for No Bus:ptybc
[ 28.080445] PM: Adding info for No Bus:ptybd
[ 28.080548] PM: Adding info for No Bus:ptybe
[ 28.080652] PM: Adding info for No Bus:ptybf
[ 28.080770] PM: Adding info for No Bus:ptyc0
[ 28.080887] PM: Adding info for No Bus:ptyc1
[ 28.081001] PM: Adding info for No Bus:ptyc2
[ 28.081126] PM: Adding info for No Bus:ptyc3
[ 28.081244] PM: Adding info for No Bus:ptyc4
[ 28.081360] PM: Adding info for No Bus:ptyc5
[ 28.081477] PM: Adding info for No Bus:ptyc6
[ 28.081588] PM: Adding info for No Bus:ptyc7
[ 28.081718] PM: Adding info for No Bus:ptyc8
[ 28.081836] PM: Adding info for No Bus:ptyc9
[ 28.081949] PM: Adding info for No Bus:ptyca
[ 28.082066] PM: Adding info for No Bus:ptycb
[ 28.082188] PM: Adding info for No Bus:ptycc
[ 28.082308] PM: Adding info for No Bus:ptycd
[ 28.082433] PM: Adding info for No Bus:ptyce
[ 28.082567] PM: Adding info for No Bus:ptycf
[ 28.082684] PM: Adding info for No Bus:ptyd0
[ 28.082802] PM: Adding info for No Bus:ptyd1
[ 28.082925] PM: Adding info for No Bus:ptyd2
[ 28.083051] PM: Adding info for No Bus:ptyd3
[ 28.083167] PM: Adding info for No Bus:ptyd4
[ 28.083302] PM: Adding info for No Bus:ptyd5
[ 28.083466] PM: Adding info for No Bus:ptyd6
[ 28.083599] PM: Adding info for No Bus:ptyd7
[ 28.083720] PM: Adding info for No Bus:ptyd8
[ 28.083920] PM: Adding info for No Bus:ptyd9
[ 28.084049] PM: Adding info for No Bus:ptyda
[ 28.084186] PM: Adding info for No Bus:ptydb
[ 28.084308] PM: Adding info for No Bus:ptydc
[ 28.084420] PM: Adding info for No Bus:ptydd
[ 28.084529] PM: Adding info for No Bus:ptyde
[ 28.084643] PM: Adding info for No Bus:ptydf
[ 28.084765] PM: Adding info for No Bus:ptye0
[ 28.084892] PM: Adding info for No Bus:ptye1
[ 28.085037] PM: Adding info for No Bus:ptye2
[ 28.085170] PM: Adding info for No Bus:ptye3
[ 28.085301] PM: Adding info for No Bus:ptye4
[ 28.085427] PM: Adding info for No Bus:ptye5
[ 28.085550] PM: Adding info for No Bus:ptye6
[ 28.085697] PM: Adding info for No Bus:ptye7
[ 28.085841] PM: Adding info for No Bus:ptye8
[ 28.085976] PM: Adding info for No Bus:ptye9
[ 28.086109] PM: Adding info for No Bus:ptyea
[ 28.086246] PM: Adding info for No Bus:ptyeb
[ 28.086380] PM: Adding info for No Bus:ptyec
[ 28.086519] PM: Adding info for No Bus:ptyed
[ 28.086648] PM: Adding info for No Bus:ptyee
[ 28.086796] PM: Adding info for No Bus:ptyef
[ 28.086948] PM: Adding info for No Bus:ttyp0
[ 28.087086] PM: Adding info for No Bus:ttyp1
[ 28.087216] PM: Adding info for No Bus:ttyp2
[ 28.087354] PM: Adding info for No Bus:ttyp3
[ 28.087566] PM: Adding info for No Bus:ttyp4
[ 28.087711] PM: Adding info for No Bus:ttyp5
[ 28.087938] PM: Adding info for No Bus:ttyp6
[ 28.088084] PM: Adding info for No Bus:ttyp7
[ 28.088213] PM: Adding info for No Bus:ttyp8
[ 28.088340] PM: Adding info for No Bus:ttyp9
[ 28.088466] PM: Adding info for No Bus:ttypa
[ 28.088606] PM: Adding info for No Bus:ttypb
[ 28.088756] PM: Adding info for No Bus:ttypc
[ 28.088888] PM: Adding info for No Bus:ttypd
[ 28.089012] PM: Adding info for No Bus:ttype
[ 28.089151] PM: Adding info for No Bus:ttypf
[ 28.089284] PM: Adding info for No Bus:ttyq0
[ 28.089420] PM: Adding info for No Bus:ttyq1
[ 28.089561] PM: Adding info for No Bus:ttyq2
[ 28.089699] PM: Adding info for No Bus:ttyq3
[ 28.089829] PM: Adding info for No Bus:ttyq4
[ 28.089958] PM: Adding info for No Bus:ttyq5
[ 28.090103] PM: Adding info for No Bus:ttyq6
[ 28.090249] PM: Adding info for No Bus:ttyq7
[ 28.090389] PM: Adding info for No Bus:ttyq8
[ 28.090545] PM: Adding info for No Bus:ttyq9
[ 28.090685] PM: Adding info for No Bus:ttyqa
[ 28.090832] PM: Adding info for No Bus:ttyqb
[ 28.090975] PM: Adding info for No Bus:ttyqc
[ 28.091120] PM: Adding info for No Bus:ttyqd
[ 28.091263] PM: Adding info for No Bus:ttyqe
[ 28.091478] PM: Adding info for No Bus:ttyqf
[ 28.091639] PM: Adding info for No Bus:ttyr0
[ 28.091854] PM: Adding info for No Bus:ttyr1
[ 28.092026] PM: Adding info for No Bus:ttyr2
[ 28.092182] PM: Adding info for No Bus:ttyr3
[ 28.092328] PM: Adding info for No Bus:ttyr4
[ 28.092469] PM: Adding info for No Bus:ttyr5
[ 28.092632] PM: Adding info for No Bus:ttyr6
[ 28.092782] PM: Adding info for No Bus:ttyr7
[ 28.092926] PM: Adding info for No Bus:ttyr8
[ 28.093070] PM: Adding info for No Bus:ttyr9
[ 28.093211] PM: Adding info for No Bus:ttyra
[ 28.093366] PM: Adding info for No Bus:ttyrb
[ 28.093520] PM: Adding info for No Bus:ttyrc
[ 28.093673] PM: Adding info for No Bus:ttyrd
[ 28.093819] PM: Adding info for No Bus:ttyre
[ 28.093973] PM: Adding info for No Bus:ttyrf
[ 28.094127] PM: Adding info for No Bus:ttys0
[ 28.094284] PM: Adding info for No Bus:ttys1
[ 28.094443] PM: Adding info for No Bus:ttys2
[ 28.094623] PM: Adding info for No Bus:ttys3
[ 28.094781] PM: Adding info for No Bus:ttys4
[ 28.094939] PM: Adding info for No Bus:ttys5
[ 28.095097] PM: Adding info for No Bus:ttys6
[ 28.095252] PM: Adding info for No Bus:ttys7
[ 28.095476] PM: Adding info for No Bus:ttys8
[ 28.095657] PM: Adding info for No Bus:ttys9
[ 28.095905] PM: Adding info for No Bus:ttysa
[ 28.096092] PM: Adding info for No Bus:ttysb
[ 28.096255] PM: Adding info for No Bus:ttysc
[ 28.096412] PM: Adding info for No Bus:ttysd
[ 28.096568] PM: Adding info for No Bus:ttyse
[ 28.096730] PM: Adding info for No Bus:ttysf
[ 28.096902] PM: Adding info for No Bus:ttyt0
[ 28.097069] PM: Adding info for No Bus:ttyt1
[ 28.097231] PM: Adding info for No Bus:ttyt2
[ 28.097399] PM: Adding info for No Bus:ttyt3
[ 28.097561] PM: Adding info for No Bus:ttyt4
[ 28.097723] PM: Adding info for No Bus:ttyt5
[ 28.097897] PM: Adding info for No Bus:ttyt6
[ 28.098072] PM: Adding info for No Bus:ttyt7
[ 28.098243] PM: Adding info for No Bus:ttyt8
[ 28.098411] PM: Adding info for No Bus:ttyt9
[ 28.098587] PM: Adding info for No Bus:ttyta
[ 28.098778] PM: Adding info for No Bus:ttytb
[ 28.098958] PM: Adding info for No Bus:ttytc
[ 28.099148] PM: Adding info for No Bus:ttytd
[ 28.099329] PM: Adding info for No Bus:ttyte
[ 28.099584] PM: Adding info for No Bus:ttytf
[ 28.099765] PM: Adding info for No Bus:ttyu0
[ 28.100041] PM: Adding info for No Bus:ttyu1
[ 28.100224] PM: Adding info for No Bus:ttyu2
[ 28.100409] PM: Adding info for No Bus:ttyu3
[ 28.100592] PM: Adding info for No Bus:ttyu4
[ 28.100765] PM: Adding info for No Bus:ttyu5
[ 28.100935] PM: Adding info for No Bus:ttyu6
[ 28.101120] PM: Adding info for No Bus:ttyu7
[ 28.101299] PM: Adding info for No Bus:ttyu8
[ 28.101477] PM: Adding info for No Bus:ttyu9
[ 28.101676] PM: Adding info for No Bus:ttyua
[ 28.101856] PM: Adding info for No Bus:ttyub
[ 28.102036] PM: Adding info for No Bus:ttyuc
[ 28.102210] PM: Adding info for No Bus:ttyud
[ 28.102396] PM: Adding info for No Bus:ttyue
[ 28.102578] PM: Adding info for No Bus:ttyuf
[ 28.102768] PM: Adding info for No Bus:ttyv0
[ 28.102967] PM: Adding info for No Bus:ttyv1
[ 28.103155] PM: Adding info for No Bus:ttyv2
[ 28.103350] PM: Adding info for No Bus:ttyv3
[ 28.103615] PM: Adding info for No Bus:ttyv4
[ 28.103894] PM: Adding info for No Bus:ttyv5
[ 28.104109] PM: Adding info for No Bus:ttyv6
[ 28.104317] PM: Adding info for No Bus:ttyv7
[ 28.104506] PM: Adding info for No Bus:ttyv8
[ 28.104694] PM: Adding info for No Bus:ttyv9
[ 28.104887] PM: Adding info for No Bus:ttyva
[ 28.105090] PM: Adding info for No Bus:ttyvb
[ 28.105291] PM: Adding info for No Bus:ttyvc
[ 28.105488] PM: Adding info for No Bus:ttyvd
[ 28.105688] PM: Adding info for No Bus:ttyve
[ 28.105890] PM: Adding info for No Bus:ttyvf
[ 28.106086] PM: Adding info for No Bus:ttyw0
[ 28.106279] PM: Adding info for No Bus:ttyw1
[ 28.106472] PM: Adding info for No Bus:ttyw2
[ 28.106668] PM: Adding info for No Bus:ttyw3
[ 28.106883] PM: Adding info for No Bus:ttyw4
[ 28.107089] PM: Adding info for No Bus:ttyw5
[ 28.107290] PM: Adding info for No Bus:ttyw6
[ 28.107573] PM: Adding info for No Bus:ttyw7
[ 28.107870] PM: Adding info for No Bus:ttyw8
[ 28.108151] PM: Adding info for No Bus:ttyw9
[ 28.108377] PM: Adding info for No Bus:ttywa
[ 28.108591] PM: Adding info for No Bus:ttywb
[ 28.108788] PM: Adding info for No Bus:ttywc
[ 28.108983] PM: Adding info for No Bus:ttywd
[ 28.109183] PM: Adding info for No Bus:ttywe
[ 28.109381] PM: Adding info for No Bus:ttywf
[ 28.109587] PM: Adding info for No Bus:ttyx0
[ 28.109808] PM: Adding info for No Bus:ttyx1
[ 28.110007] PM: Adding info for No Bus:ttyx2
[ 28.110218] PM: Adding info for No Bus:ttyx3
[ 28.110427] PM: Adding info for No Bus:ttyx4
[ 28.110631] PM: Adding info for No Bus:ttyx5
[ 28.110835] PM: Adding info for No Bus:ttyx6
[ 28.111058] PM: Adding info for No Bus:ttyx7
[ 28.111270] PM: Adding info for No Bus:ttyx8
[ 28.111555] PM: Adding info for No Bus:ttyx9
[ 28.111858] PM: Adding info for No Bus:ttyxa
[ 28.112108] PM: Adding info for No Bus:ttyxb
[ 28.112325] PM: Adding info for No Bus:ttyxc
[ 28.112533] PM: Adding info for No Bus:ttyxd
[ 28.112762] PM: Adding info for No Bus:ttyxe
[ 28.112976] PM: Adding info for No Bus:ttyxf
[ 28.113187] PM: Adding info for No Bus:ttyy0
[ 28.113399] PM: Adding info for No Bus:ttyy1
[ 28.113609] PM: Adding info for No Bus:ttyy2
[ 28.113836] PM: Adding info for No Bus:ttyy3
[ 28.114059] PM: Adding info for No Bus:ttyy4
[ 28.114277] PM: Adding info for No Bus:ttyy5
[ 28.114489] PM: Adding info for No Bus:ttyy6
[ 28.114706] PM: Adding info for No Bus:ttyy7
[ 28.114917] PM: Adding info for No Bus:ttyy8
[ 28.115132] PM: Adding info for No Bus:ttyy9
[ 28.115428] PM: Adding info for No Bus:ttyya
[ 28.115688] PM: Adding info for No Bus:ttyyb
[ 28.116026] PM: Adding info for No Bus:ttyyc
[ 28.116268] PM: Adding info for No Bus:ttyyd
[ 28.116488] PM: Adding info for No Bus:ttyye
[ 28.116723] PM: Adding info for No Bus:ttyyf
[ 28.116943] PM: Adding info for No Bus:ttyz0
[ 28.117173] PM: Adding info for No Bus:ttyz1
[ 28.117408] PM: Adding info for No Bus:ttyz2
[ 28.117642] PM: Adding info for No Bus:ttyz3
[ 28.117872] PM: Adding info for No Bus:ttyz4
[ 28.118101] PM: Adding info for No Bus:ttyz5
[ 28.118329] PM: Adding info for No Bus:ttyz6
[ 28.118558] PM: Adding info for No Bus:ttyz7
[ 28.118813] PM: Adding info for No Bus:ttyz8
[ 28.119042] PM: Adding info for No Bus:ttyz9
[ 28.119272] PM: Adding info for No Bus:ttyza
[ 28.119596] PM: Adding info for No Bus:ttyzb
[ 28.119941] PM: Adding info for No Bus:ttyzc
[ 28.120251] PM: Adding info for No Bus:ttyzd
[ 28.120518] PM: Adding info for No Bus:ttyze
[ 28.120762] PM: Adding info for No Bus:ttyzf
[ 28.120995] PM: Adding info for No Bus:ttya0
[ 28.121227] PM: Adding info for No Bus:ttya1
[ 28.121466] PM: Adding info for No Bus:ttya2
[ 28.121712] PM: Adding info for No Bus:ttya3
[ 28.121949] PM: Adding info for No Bus:ttya4
[ 28.122201] PM: Adding info for No Bus:ttya5
[ 28.122435] PM: Adding info for No Bus:ttya6
[ 28.122678] PM: Adding info for No Bus:ttya7
[ 28.122917] PM: Adding info for No Bus:ttya8
[ 28.123153] PM: Adding info for No Bus:ttya9
[ 28.123468] PM: Adding info for No Bus:ttyaa
[ 28.123834] PM: Adding info for No Bus:ttyab
[ 28.124120] PM: Adding info for No Bus:ttyac
[ 28.124366] PM: Adding info for No Bus:ttyad
[ 28.124604] PM: Adding info for No Bus:ttyae
[ 28.124846] PM: Adding info for No Bus:ttyaf
[ 28.125088] PM: Adding info for No Bus:ttyb0
[ 28.125331] PM: Adding info for No Bus:ttyb1
[ 28.125596] PM: Adding info for No Bus:ttyb2
[ 28.125850] PM: Adding info for No Bus:ttyb3
[ 28.126104] PM: Adding info for No Bus:ttyb4
[ 28.126352] PM: Adding info for No Bus:ttyb5
[ 28.126596] PM: Adding info for No Bus:ttyb6
[ 28.126838] PM: Adding info for No Bus:ttyb7
[ 28.127093] PM: Adding info for No Bus:ttyb8
[ 28.127417] PM: Adding info for No Bus:ttyb9
[ 28.127691] PM: Adding info for No Bus:ttyba
[ 28.128089] PM: Adding info for No Bus:ttybb
[ 28.128357] PM: Adding info for No Bus:ttybc
[ 28.128611] PM: Adding info for No Bus:ttybd
[ 28.128861] PM: Adding info for No Bus:ttybe
[ 28.129138] PM: Adding info for No Bus:ttybf
[ 28.129390] PM: Adding info for No Bus:ttyc0
[ 28.129638] PM: Adding info for No Bus:ttyc1
[ 28.129893] PM: Adding info for No Bus:ttyc2
[ 28.130158] PM: Adding info for No Bus:ttyc3
[ 28.130416] PM: Adding info for No Bus:ttyc4
[ 28.130677] PM: Adding info for No Bus:ttyc5
[ 28.130940] PM: Adding info for No Bus:ttyc6
[ 28.131195] PM: Adding info for No Bus:ttyc7
[ 28.131545] PM: Adding info for No Bus:ttyc8
[ 28.131920] PM: Adding info for No Bus:ttyc9
[ 28.132204] PM: Adding info for No Bus:ttyca
[ 28.132494] PM: Adding info for No Bus:ttycb
[ 28.132777] PM: Adding info for No Bus:ttycc
[ 28.133034] PM: Adding info for No Bus:ttycd
[ 28.133292] PM: Adding info for No Bus:ttyce
[ 28.133546] PM: Adding info for No Bus:ttycf
[ 28.133876] PM: Adding info for No Bus:ttyd0
[ 28.134162] PM: Adding info for No Bus:ttyd1
[ 28.134442] PM: Adding info for No Bus:ttyd2
[ 28.134722] PM: Adding info for No Bus:ttyd3
[ 28.134999] PM: Adding info for No Bus:ttyd4
[ 28.135264] PM: Adding info for No Bus:ttyd5
[ 28.135622] PM: Adding info for No Bus:ttyd6
[ 28.136036] PM: Adding info for No Bus:ttyd7
[ 28.136328] PM: Adding info for No Bus:ttyd8
[ 28.136624] PM: Adding info for No Bus:ttyd9
[ 28.136894] PM: Adding info for No Bus:ttyda
[ 28.137174] PM: Adding info for No Bus:ttydb
[ 28.137448] PM: Adding info for No Bus:ttydc
[ 28.137715] PM: Adding info for No Bus:ttydd
[ 28.137988] PM: Adding info for No Bus:ttyde
[ 28.138271] PM: Adding info for No Bus:ttydf
[ 28.138552] PM: Adding info for No Bus:ttye0
[ 28.138828] PM: Adding info for No Bus:ttye1
[ 28.139104] PM: Adding info for No Bus:ttye2
[ 28.139493] PM: Adding info for No Bus:ttye3
[ 28.139902] PM: Adding info for No Bus:ttye4
[ 28.140213] PM: Adding info for No Bus:ttye5
[ 28.140514] PM: Adding info for No Bus:ttye6
[ 28.140795] PM: Adding info for No Bus:ttye7
[ 28.141072] PM: Adding info for No Bus:ttye8
[ 28.141351] PM: Adding info for No Bus:ttye9
[ 28.141626] PM: Adding info for No Bus:ttyea
[ 28.141918] PM: Adding info for No Bus:ttyeb
[ 28.142216] PM: Adding info for No Bus:ttyec
[ 28.142510] PM: Adding info for No Bus:ttyed
[ 28.142792] PM: Adding info for No Bus:ttyee
[ 28.143086] PM: Adding info for No Bus:ttyef
[ 28.143182] PM: Adding info for No Bus:hpet
[ 28.143248] PM: Removing info for No Bus:hpet
[ 28.143343] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 28.143375] PM: Adding info for platform:serial8250
[ 28.143510] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.143830] PM: Adding info for No Bus:ttyS0
[ 28.143985] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.144228] PM: Adding info for No Bus:ttyS1
[ 28.144576] PM: Adding info for No Bus:ttyS2
[ 28.144911] PM: Adding info for No Bus:ttyS3
[ 28.145461] PM: Removing info for No Bus:ttyS0
[ 28.145595] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.145894] PM: Adding info for No Bus:ttyS0
[ 28.146150] PM: Removing info for No Bus:ttyS1
[ 28.146279] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.146555] PM: Adding info for No Bus:ttyS1
[ 28.146767] PM: Adding info for No Bus:isa
[ 28.147529] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.147873] input: Macintosh mouse button emulation as /class/input/input0
[ 28.147895] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.147900] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 28.148249] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 28.148307] PM: Adding info for platform:i8042
[ 28.151067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.151077] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.151126] PM: Adding info for serio:serio0
[ 28.151220] PM: Adding info for serio:serio1
[ 28.151319] PM: Adding info for No Bus:psaux
[ 28.151352] mice: PS/2 mouse device common for all mice
[ 28.151482] PM: Adding info for platform:eisa.0
[ 28.151527] EISA: Probing bus 0 at eisa.0
[ 28.151552] Cannot allocate resource for EISA slot 4
[ 28.151555] Cannot allocate resource for EISA slot 5
[ 28.151569] EISA: Detected 0 cards.
[ 28.151736] TCP cubic registered
[ 28.151750] NET: Registered protocol family 1
[ 28.151791] Using IPI Shortcut mode
[ 28.151829] Magic number: 15:412:125
[ 28.152877] Freeing unused kernel memory: 320k freed
[ 28.152963] PM: Adding info for No Bus:vcs1
[ 28.153092] PM: Adding info for No Bus:vcsa1
[ 28.155698] Time: tsc clocksource has been installed.
[ 28.179069] input: AT Translated Set 2 keyboard as /class/input/input1
[ 28.343278] PM: Adding info for No Bus:vcs2
[ 28.343391] PM: Adding info for No Bus:vcsa2
[ 28.344318] PM: Removing info for No Bus:vcs2
[ 28.344429] PM: Removing info for No Bus:vcsa2
[ 28.347730] PM: Adding info for No Bus:vcs2
[ 28.347851] PM: Adding info for No Bus:vcsa2
[ 28.353123] PM: Removing info for No Bus:vcs2
[ 28.353265] PM: Removing info for No Bus:vcsa2
[ 28.355733] PM: Adding info for No Bus:vcs2
[ 28.355839] PM: Adding info for No Bus:vcsa2
[ 28.357629] PM: Removing info for No Bus:vcs2
[ 28.357747] PM: Removing info for No Bus:vcsa2
[ 28.359329] PM: Adding info for No Bus:vcs3
[ 28.359485] PM: Adding info for No Bus:vcsa3
[ 28.360350] PM: Removing info for No Bus:vcs3
[ 28.360458] PM: Removing info for No Bus:vcsa3
[ 28.363721] PM: Adding info for No Bus:vcs3
[ 28.363852] PM: Adding info for No Bus:vcsa3
[ 28.368961] PM: Removing info for No Bus:vcs3
[ 28.369092] PM: Removing info for No Bus:vcsa3
[ 28.371491] PM: Adding info for No Bus:vcs3
[ 28.371602] PM: Adding info for No Bus:vcsa3
[ 28.373403] PM: Removing info for No Bus:vcs3
[ 28.373520] PM: Removing info for No Bus:vcsa3
[ 28.375071] PM: Adding info for No Bus:vcs4
[ 28.375182] PM: Adding info for No Bus:vcsa4
[ 28.376068] PM: Removing info for No Bus:vcs4
[ 28.376179] PM: Removing info for No Bus:vcsa4
[ 28.379445] PM: Adding info for No Bus:vcs4
[ 28.379566] PM: Adding info for No Bus:vcsa4
[ 28.384490] PM: Removing info for No Bus:vcs4
[ 28.384631] PM: Removing info for No Bus:vcsa4
[ 28.387021] PM: Adding info for No Bus:vcs4
[ 28.387127] PM: Adding info for No Bus:vcsa4
[ 28.388990] PM: Removing info for No Bus:vcs4
[ 28.389109] PM: Removing info for No Bus:vcsa4
[ 28.390662] PM: Adding info for No Bus:vcs5
[ 28.390769] PM: Adding info for No Bus:vcsa5
[ 28.391757] PM: Removing info for No Bus:vcs5
[ 28.391872] PM: Removing info for No Bus:vcsa5
[ 28.395151] PM: Adding info for No Bus:vcs5
[ 28.395275] PM: Adding info for No Bus:vcsa5
[ 28.400323] PM: Removing info for No Bus:vcs5
[ 28.400463] PM: Removing info for No Bus:vcsa5
[ 28.402901] PM: Adding info for No Bus:vcs5
[ 28.403005] PM: Adding info for No Bus:vcsa5
[ 28.404832] PM: Removing info for No Bus:vcs5
[ 28.404948] PM: Removing info for No Bus:vcsa5
[ 28.406517] PM: Adding info for No Bus:vcs6
[ 28.406624] PM: Adding info for No Bus:vcsa6
[ 28.407537] PM: Removing info for No Bus:vcs6
[ 28.407647] PM: Removing info for No Bus:vcsa6
[ 28.410913] PM: Adding info for No Bus:vcs6
[ 28.411050] PM: Adding info for No Bus:vcsa6
[ 28.416143] PM: Removing info for No Bus:vcs6
[ 28.416275] PM: Removing info for No Bus:vcsa6
[ 28.418650] PM: Adding info for No Bus:vcs6
[ 28.418759] PM: Adding info for No Bus:vcsa6
[ 28.420568] PM: Removing info for No Bus:vcs6
[ 28.420681] PM: Removing info for No Bus:vcsa6
[ 28.524688] PM: Adding info for No Bus:vcs8
[ 28.524828] PM: Adding info for No Bus:vcsa8
[ 29.718952] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 30.746025] usbcore: registered new interface driver usbfs
[ 30.746085] usbcore: registered new interface driver hub
[ 30.746127] usbcore: registered new device driver usb
[ 30.748688] USB Universal Host Controller Interface driver v3.0
[ 30.748797] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 30.748803] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 30.749038] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 30.749080] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000
[ 30.749170] PM: Adding info for usb:usb1
[ 30.749263] PM: Adding info for No Bus:usbdev1.1_ep00
[ 30.749290] usb usb1: configuration #1 chosen from 1 choice
[ 30.749306] PM: Adding info for usb:1-0:1.0
[ 30.749334] hub 1-0:1.0: USB hub found
[ 30.749349] hub 1-0:1.0: 2 ports detected
[ 30.829507] SCSI subsystem initialized
[ 30.840610] libata version 2.00 loaded.
[ 30.851753] PM: Adding info for No Bus:usbdev1.1_ep81
[ 30.851919] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 30.851925] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 30.851976] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 30.852013] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d800
[ 30.852089] PM: Adding info for usb:usb2
[ 30.852159] PM: Adding info for No Bus:usbdev2.1_ep00
[ 30.852181] usb usb2: configuration #1 chosen from 1 choice
[ 30.852199] PM: Adding info for usb:2-0:1.0
[ 30.852226] hub 2-0:1.0: USB hub found
[ 30.852244] hub 2-0:1.0: 2 ports detected
[ 30.862114] Linux Tulip driver version 1.1.14 (May 11, 2002)
[ 30.955636] PM: Adding info for No Bus:usbdev2.1_ep81
[ 30.980056] pata_pdc2027x 0000:02:01.0: version 0.74-ac5
[ 31.079273] pata_pdc2027x 0000:02:01.0: PLL input clock 16550 kHz
[ 31.143890] ata1: PATA max UDMA/133 cmd 0xE08517C0 ctl 0xE0851FDA bmdma 0xE0851000 irq 21
[ 31.143939] ata2: PATA max UDMA/133 cmd 0xE08515C0 ctl 0xE0851DDA bmdma 0xE0851008 irq 21
[ 31.143962] scsi0 : pata_pdc2027x
[ 31.144002] PM: Adding info for No Bus:host0
[ 31.187961] Floppy drive(s): fd0 is 1.44M
[ 31.257445] FDC 0 is a post-1991 82077
[ 31.278397] PM: Adding info for platform:floppy.0
[ 31.307401] ata1.00: ATA-7, max UDMA/100, 234493056 sectors: LBA48
[ 31.307407] ata1.00: ata1: dev 0 multi count 16
[ 31.315341] ata1.01: ATA-7, max UDMA/133, 320173056 sectors: LBA48
[ 31.315348] ata1.01: ata1: dev 1 multi count 16
[ 31.323327] ata1.00: configured for UDMA/100
[ 31.331336] ata1.01: configured for UDMA/133
[ 31.331376] scsi1 : pata_pdc2027x
[ 31.331423] PM: Adding info for No Bus:host1
[ 31.498123] ATA: abnormal status 0x7F on port 0xE08515DF
[ 31.509508] ATA: abnormal status 0x7F on port 0xE08515DF
[ 31.638396] PM: Removing info for No Bus:vcs8
[ 31.638451] PM: Removing info for No Bus:vcsa8
[ 31.670767] ata2.01: ATAPI, max MWDMA2
[ 31.670779] ata2.01: device is on DMA blacklist, disabling DMA
[ 31.834514] ata2.01: configured for PIO4
[ 31.834585] PM: Adding info for No Bus:target0:0:0
[ 31.834757] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1203N TL10 PQ: 0 ANSI: 5
[ 31.834772] PM: Adding info for scsi:0:0:0:0
[ 31.834853] PM: Adding info for No Bus:target0:0:1
[ 31.835435] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5
[ 31.835459] PM: Adding info for scsi:0:0:1:0
[ 31.835549] PM: Adding info for No Bus:target1:0:1
[ 31.836116] scsi 1:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH A80 PQ: 0 ANSI: 5
[ 31.836139] PM: Adding info for scsi:1:0:1:0
[ 31.837144] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
[ 31.844041] eth0: ADMtek Comet rev 17 at Port 0xb400, 00:04:5A:8A:55:7B, IRQ 21.
[ 31.844513] ata_piix 0000:00:1f.1: version 2.00ac7
[ 31.844552] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 31.844648] ata3: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[ 31.844713] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[ 31.844746] scsi2 : ata_piix
[ 31.844772] PM: Adding info for No Bus:host2
[ 31.874227] SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
[ 31.876140] sda: Write Protect is off
[ 31.876148] sda: Mode Sense: 00 3a 00 00
[ 31.876200] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.876321] SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
[ 31.876333] sda: Write Protect is off
[ 31.876337] sda: Mode Sense: 00 3a 00 00
[ 31.876354] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.876360] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 31.930547] sd 0:0:0:0: Attached scsi disk sda
[ 31.930887] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[ 31.930906] sdb: Write Protect is off
[ 31.930910] sdb: Mode Sense: 00 3a 00 00
[ 31.930929] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.931017] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[ 31.931029] sdb: Write Protect is off
[ 31.931033] sdb: Mode Sense: 00 3a 00 00
[ 31.931051] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.931056] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 31.956568] sd 0:0:1:0: Attached scsi disk sdb
[ 31.966535] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 31.966777] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 31.967009] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 32.009563] sr0: scsi3-mmc drive: 229x/52x cd/rw xa/form2 cdda tray
[ 32.009573] Uniform CD-ROM driver Revision: 3.20
[ 32.009974] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 32.162001] ata3.00: ATAPI, max UDMA/33
[ 32.325697] ata3.00: configured for UDMA/33
[ 32.325727] scsi3 : ata_piix
[ 32.325761] PM: Adding info for No Bus:host3
[ 32.481337] PM: Adding info for No Bus:target2:0:0
[ 32.483575] scsi 2:0:0:0: CD-ROM HP DVD Writer 200j 1.36 PQ: 0 ANSI: 5
[ 32.483590] PM: Adding info for scsi:2:0:0:0
[ 32.487568] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 32.487758] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 32.487850] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 32.586158] Attempting manual resume
[ 32.586165] swsusp: Resume From Partition 8:6
[ 32.586167] PM: Checking swsusp image.
[ 32.594160] PM: Resume from disk failed.
[ 32.648471] kjournald starting. Commit interval 5 seconds
[ 32.648495] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.007169] PM: Removing info for No Bus:vcs1
[ 33.007216] PM: Removing info for No Bus:vcsa1
[ 33.007300] PM: Adding info for No Bus:vcs1
[ 33.007319] PM: Adding info for No Bus:vcsa1
[ 37.668888] PM: Adding info for No Bus:vcs2
[ 37.668929] PM: Adding info for No Bus:vcsa2
[ 37.670856] PM: Removing info for No Bus:vcs2
[ 37.670903] PM: Removing info for No Bus:vcsa2
[ 37.671155] PM: Adding info for No Bus:vcs3
[ 37.671178] PM: Adding info for No Bus:vcsa3
[ 37.673056] PM: Removing info for No Bus:vcs3
[ 37.673102] PM: Removing info for No Bus:vcsa3
[ 37.673360] PM: Adding info for No Bus:vcs4
[ 37.673382] PM: Adding info for No Bus:vcsa4
[ 37.675310] PM: Removing info for No Bus:vcs4
[ 37.675359] PM: Removing info for No Bus:vcsa4
[ 37.675608] PM: Adding info for No Bus:vcs5
[ 37.675632] PM: Adding info for No Bus:vcsa5
[ 37.677592] PM: Removing info for No Bus:vcs5
[ 37.677640] PM: Removing info for No Bus:vcsa5
[ 37.677894] PM: Adding info for No Bus:vcs6
[ 37.677918] PM: Adding info for No Bus:vcsa6
[ 37.679801] PM: Removing info for No Bus:vcs6
[ 37.679850] PM: Removing info for No Bus:vcsa6
[ 40.253492] NET: Registered protocol family 10
[ 40.253691] lo: Disabled Privacy Extensions
[ 41.654379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.702491] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.028844] 0000:02:05.0: tulip_stop_rxtx() failed
[ 42.028859] eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
[ 42.348211] input: PC Speaker as /class/input/input2
[ 42.392817] iTCO_vendor_support: vendor-support=0
[ 42.419619] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 42.419685] PM: Adding info for platform:iTCO_wdt
[ 42.419744] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 42.419804] iTCO_wdt: No card detected
[ 42.431118] PM: Adding info for No Bus:rtc
[ 42.431187] Real Time Clock Driver v1.12ac
[ 42.461676] Linux agpgart interface v0.101 (c) Dave Jones
[ 42.479668] agpgart: Detected an Intel i845 Chipset.
[ 42.483579] PM: Adding info for No Bus:agpgart
[ 42.483677] agpgart: AGP aperture is 64M @ 0xe8000000
[ 43.427358] parport: PnPBIOS parport detected.
[ 43.427428] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 43.731141] PM: Adding info for No Bus:timer
[ 43.814766] PM: Adding info for No Bus:seq
[ 43.940800] PM: Adding info for No Bus:sequencer
[ 43.940851] PM: Adding info for No Bus:sequencer2
[ 44.285467] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 44.290828] PM: Adding info for No Bus:midiC1D0
[ 44.290865] PM: Adding info for No Bus:midi1
[ 44.290885] PM: Adding info for No Bus:dmmidi1
[ 44.290946] PM: Adding info for No Bus:controlC1
[ 44.290979] PM: Adding info for No Bus:mixer1
[ 44.291826] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 44.607088] intel8x0_measure_ac97_clock: measured 54895 usecs
[ 44.607093] intel8x0: clocking to 48000
[ 44.607149] PM: Adding info for No Bus:pcmC0D1c
[ 44.607302] PM: Adding info for No Bus:adsp
[ 44.607349] PM: Adding info for No Bus:pcmC0D0p
[ 44.607401] PM: Adding info for No Bus:pcmC0D0c
[ 44.607447] PM: Adding info for No Bus:dsp
[ 44.607503] PM: Adding info for No Bus:audio
[ 44.607560] PM: Adding info for ac97:0-0:ALC200,200P
[ 44.607611] PM: Adding info for No Bus:controlC0
[ 44.607667] PM: Adding info for No Bus:mixer
[ 50.889690] eth0: no IPv6 routers present
[ 62.013082] ata2.01: qc timeout (cmd 0xa0)
[ 62.013098] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 62.013160] ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 62.013163] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 69.002638] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 91.984233] ata2: port failed to respond (30 secs, Status 0xd8)
[ 91.984292] ata2: soft resetting port
[ 92.151391] ATA: abnormal status 0x7F on port 0xE08515DF
[ 92.162767] ATA: abnormal status 0x7F on port 0xE08515DF
[ 92.323758] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 92.323766] ata2.01: revalidation failed (errno=-5)
[ 92.323821] ata2: failed to recover some devices, retrying in 5 secs
[ 97.320272] ata2: soft resetting port
[ 97.487428] ATA: abnormal status 0x7F on port 0xE08515DF
[ 97.498808] ATA: abnormal status 0x7F on port 0xE08515DF
[ 97.660041] ata2.01: device is on DMA blacklist, disabling DMA
[ 97.823822] ata2.01: configured for PIO4
[ 97.823874] ata2: EH complete
[ 127.798684] ata2.01: qc timeout (cmd 0xa0)
[ 127.798702] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 127.798762] ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 127.798764] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 134.788234] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 157.769854] ata2: port failed to respond (30 secs, Status 0xd8)
[ 157.769913] ata2: soft resetting port
[ 157.936980] ATA: abnormal status 0x7F on port 0xE08515DF
[ 157.948359] ATA: abnormal status 0x7F on port 0xE08515DF
[ 158.109360] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 158.109367] ata2.01: revalidation failed (errno=-5)
[ 158.109422] ata2: failed to recover some devices, retrying in 5 secs
[ 163.105873] ata2: soft resetting port
[ 163.273031] ATA: abnormal status 0x7F on port 0xE08515DF
[ 163.284407] ATA: abnormal status 0x7F on port 0xE08515DF
[ 163.445644] ata2.01: device is on DMA blacklist, disabling DMA
[ 163.609414] ata2.01: configured for PIO4
[ 163.609465] ata2: EH complete
[ 193.576298] ata2.01: qc timeout (cmd 0xa0)
[ 193.576316] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 193.576378] ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 193.576380] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 200.565848] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 218.829995] fuse init (API version 7.8)
[ 218.830085] PM: Adding info for No Bus:fuse
[ 218.868534] lp0: using parport0 (interrupt-driven).
[ 218.931362] PM: Adding info for No Bus:i2c-0
[ 218.986295] PM: Adding info for i2c:0-0050
[ 219.002275] PM: Adding info for i2c:0-0051
[ 219.072822] PM: Adding info for No Bus:i2c-9191
[ 219.111646] it87: Found IT8712F chip at 0x290, revision 4
[ 219.114138] PM: Adding info for i2c:9191-0290
[ 219.116585] it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
[ 219.183076] Adding 1044184k swap on /dev/disk/by-uuid/5c6a2d8c-54c1-44cb-8f1b-4a159373a120. Priority:-1 extents:1 across:1044184k
[ 219.427288] EXT3 FS on sda7, internal journal
[ 222.960271] kjournald starting. Commit interval 5 seconds
[ 222.960444] EXT3 FS on sda1, internal journal
[ 222.960451] EXT3-fs: mounted filesystem with ordered data mode.
[ 222.986146] kjournald starting. Commit interval 5 seconds
[ 222.986337] EXT3 FS on sda3, internal journal
[ 222.986344] EXT3-fs: mounted filesystem with ordered data mode.
[ 223.034396] kjournald starting. Commit interval 5 seconds
[ 223.034642] EXT3 FS on sdb5, internal journal
[ 223.034649] EXT3-fs: mounted filesystem with ordered data mode.
[ 223.103760] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 223.183821] NTFS volume version 3.1.
[ 223.317066] kjournald starting. Commit interval 5 seconds
[ 223.317338] EXT3 FS on sdb6, internal journal
[ 223.317345] EXT3-fs: mounted filesystem with ordered data mode.
[ 223.333630] kjournald starting. Commit interval 5 seconds
[ 223.333788] EXT3 FS on sda5, internal journal
[ 223.333796] EXT3-fs: mounted filesystem with ordered data mode.
[ 223.364396] kjournald starting. Commit interval 5 seconds
[ 223.364553] EXT3 FS on sda2, internal journal
[ 223.364561] EXT3-fs: mounted filesystem with ordered data mode.
[ 223.547444] ata2: port failed to respond (30 secs, Status 0xd8)
[ 223.547504] ata2: soft resetting port
[ 223.714662] ATA: abnormal status 0x7F on port 0xE08515DF
[ 223.726189] ATA: abnormal status 0x7F on port 0xE08515DF
[ 223.886974] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 223.886982] ata2.01: revalidation failed (errno=-5)
[ 223.887037] ata2: failed to recover some devices, retrying in 5 secs
[ 225.378920] NET: Registered protocol family 17
[ 228.883486] ata2: soft resetting port
[ 229.050629] ATA: abnormal status 0x7F on port 0xE08515DF
[ 229.062003] ATA: abnormal status 0x7F on port 0xE08515DF
[ 229.223263] ata2.01: device is on DMA blacklist, disabling DMA
[ 229.387034] ata2.01: configured for PIO4
[ 229.387079] ata2: EH complete
[ 229.517651] PM: Adding info for No Bus:vcs2
[ 229.520683] PM: Adding info for No Bus:vcsa2
[ 229.525249] PM: Removing info for No Bus:vcs2
[ 229.527875] PM: Removing info for No Bus:vcsa2
[ 229.532537] PM: Adding info for No Bus:vcs2
[ 229.535581] PM: Adding info for No Bus:vcsa2
[ 229.544509] PM: Removing info for No Bus:vcs2
[ 229.547175] PM: Removing info for No Bus:vcsa2
[ 229.550172] PM: Adding info for No Bus:vcs3
[ 229.553182] PM: Adding info for No Bus:vcsa3
[ 229.557709] PM: Removing info for No Bus:vcs3
[ 229.560384] PM: Removing info for No Bus:vcsa3
[ 229.565022] PM: Adding info for No Bus:vcs3
[ 229.568050] PM: Adding info for No Bus:vcsa3
[ 229.577018] PM: Removing info for No Bus:vcs3
[ 229.579670] PM: Removing info for No Bus:vcsa3
[ 229.582686] PM: Adding info for No Bus:vcs4
[ 229.585641] PM: Adding info for No Bus:vcsa4
[ 229.590187] PM: Removing info for No Bus:vcs4
[ 229.592854] PM: Removing info for No Bus:vcsa4
[ 229.597495] PM: Adding info for No Bus:vcs4
[ 229.600545] PM: Adding info for No Bus:vcsa4
[ 229.609510] PM: Removing info for No Bus:vcs4
[ 229.612171] PM: Removing info for No Bus:vcsa4
[ 229.615182] PM: Adding info for No Bus:vcs5
[ 229.618150] PM: Adding info for No Bus:vcsa5
[ 229.622735] PM: Removing info for No Bus:vcs5
[ 229.625355] PM: Removing info for No Bus:vcsa5
[ 229.629959] PM: Adding info for No Bus:vcs5
[ 229.632994] PM: Adding info for No Bus:vcsa5
[ 229.642019] PM: Removing info for No Bus:vcs5
[ 229.644679] PM: Removing info for No Bus:vcsa5
[ 229.647695] PM: Adding info for No Bus:vcs6
[ 229.650666] PM: Adding info for No Bus:vcsa6
[ 229.655279] PM: Removing info for No Bus:vcs6
[ 229.657901] PM: Removing info for No Bus:vcsa6
[ 229.662609] PM: Adding info for No Bus:vcs6
[ 229.665584] PM: Adding info for No Bus:vcsa6
[ 229.674548] PM: Removing info for No Bus:vcs6
[ 229.677190] PM: Removing info for No Bus:vcsa6
[ 229.687379] PM: Adding info for No Bus:vcs2
[ 229.690392] PM: Adding info for No Bus:vcsa2
[ 229.695297] PM: Removing info for No Bus:vcs2
[ 229.697892] PM: Removing info for No Bus:vcsa2
[ 229.700735] PM: Adding info for No Bus:vcs3
[ 229.703734] PM: Adding info for No Bus:vcsa3
[ 229.708605] PM: Removing info for No Bus:vcs3
[ 229.711250] PM: Removing info for No Bus:vcsa3
[ 229.714049] PM: Adding info for No Bus:vcs4
[ 229.717010] PM: Adding info for No Bus:vcsa4
[ 229.721892] PM: Removing info for No Bus:vcs4
[ 229.724511] PM: Removing info for No Bus:vcsa4
[ 229.727372] PM: Adding info for No Bus:vcs5
[ 229.730324] PM: Adding info for No Bus:vcsa5
[ 229.735183] PM: Removing info for No Bus:vcs5
[ 229.737783] PM: Removing info for No Bus:vcsa5
[ 229.740613] PM: Adding info for No Bus:vcs6
[ 229.743572] PM: Adding info for No Bus:vcsa6
[ 229.748413] PM: Removing info for No Bus:vcs6
[ 229.751060] PM: Removing info for No Bus:vcsa6
[ 229.759522] PM: Adding info for No Bus:vcs6
[ 229.762651] PM: Adding info for No Bus:vcsa6
[ 230.352093] PM: Removing info for No Bus:vcs6
[ 230.354757] PM: Removing info for No Bus:vcsa6
[ 230.493471] PM: Adding info for No Bus:vcs2
[ 230.496434] PM: Adding info for No Bus:vcsa2
[ 230.499626] PM: Removing info for No Bus:vcs2
[ 230.502206] PM: Removing info for No Bus:vcsa2
[ 230.504891] PM: Adding info for No Bus:vcs3
[ 230.507858] PM: Adding info for No Bus:vcsa3
[ 230.510906] PM: Removing info for No Bus:vcs3
[ 230.513511] PM: Removing info for No Bus:vcsa3
[ 230.516195] PM: Adding info for No Bus:vcs4
[ 230.519135] PM: Adding info for No Bus:vcsa4
[ 230.522205] PM: Removing info for No Bus:vcs4
[ 230.524774] PM: Removing info for No Bus:vcsa4
[ 230.527479] PM: Adding info for No Bus:vcs5
[ 230.530467] PM: Adding info for No Bus:vcsa5
[ 230.533528] PM: Removing info for No Bus:vcs5
[ 230.536084] PM: Removing info for No Bus:vcsa5
[ 230.538825] PM: Adding info for No Bus:vcs6
[ 230.541757] PM: Adding info for No Bus:vcsa6
[ 230.544844] PM: Removing info for No Bus:vcs6
[ 230.547452] PM: Removing info for No Bus:vcsa6
[ 230.594087] PM: Adding info for No Bus:vcs2
[ 230.597095] PM: Adding info for No Bus:vcsa2
[ 230.601565] PM: Removing info for No Bus:vcs2
[ 230.604168] PM: Removing info for No Bus:vcsa2
[ 230.610636] PM: Adding info for No Bus:vcs3
[ 230.613666] PM: Adding info for No Bus:vcsa3
[ 230.618117] PM: Removing info for No Bus:vcs3
[ 230.620724] PM: Removing info for No Bus:vcsa3
[ 230.627269] PM: Adding info for No Bus:vcs4
[ 230.630310] PM: Adding info for No Bus:vcsa4
[ 230.634739] PM: Removing info for No Bus:vcs4
[ 230.637399] PM: Removing info for No Bus:vcsa4
[ 230.643862] PM: Adding info for No Bus:vcs5
[ 230.646881] PM: Adding info for No Bus:vcsa5
[ 230.651343] PM: Removing info for No Bus:vcs5
[ 230.653992] PM: Removing info for No Bus:vcsa5
[ 230.660475] PM: Adding info for No Bus:vcs6
[ 230.663518] PM: Adding info for No Bus:vcsa6
[ 230.667963] PM: Removing info for No Bus:vcs6
[ 230.670619] PM: Removing info for No Bus:vcsa6
[ 230.677292] PM: Adding info for No Bus:vcs6
[ 230.680256] PM: Adding info for No Bus:vcsa6
[ 230.688494] PM: Removing info for No Bus:vcs6
[ 230.691150] PM: Removing info for No Bus:vcsa6
[ 230.695194] PM: Adding info for No Bus:vcs6
[ 230.695721] PM: Adding info for No Bus:vcsa6
[ 230.695925] PM: Removing info for No Bus:vcs6
[ 230.695956] PM: Removing info for No Bus:vcsa6
[ 230.699839] PM: Adding info for No Bus:vcs6
[ 230.699881] PM: Adding info for No Bus:vcsa6
[ 230.731208] PM: Removing info for No Bus:vcs6
[ 230.733846] PM: Removing info for No Bus:vcsa6
[ 230.740270] PM: Adding info for No Bus:vcs6
[ 230.743274] PM: Adding info for No Bus:vcsa6
[ 230.748173] PM: Removing info for No Bus:vcs6
[ 230.750831] PM: Removing info for No Bus:vcsa6
[ 230.757351] PM: Adding info for No Bus:vcs6
[ 230.760340] PM: Adding info for No Bus:vcsa6
[ 230.765080] PM: Removing info for No Bus:vcs6
[ 230.767677] PM: Removing info for No Bus:vcsa6
[ 230.774274] PM: Adding info for No Bus:vcs6
[ 230.777281] PM: Adding info for No Bus:vcsa6
[ 230.781869] PM: Removing info for No Bus:vcs6
[ 230.784467] PM: Removing info for No Bus:vcsa6
[ 231.074427] PM: Adding info for No Bus:vcs6
[ 231.075248] PM: Adding info for No Bus:vcsa6
[ 231.091025] PM: Adding info for No Bus:vcs4
[ 231.091812] PM: Adding info for No Bus:vcsa4
[ 231.094189] PM: Adding info for No Bus:vcs5
[ 231.095030] PM: Adding info for No Bus:vcsa5
[ 231.123168] PM: Adding info for No Bus:vcs2
[ 231.126207] PM: Adding info for No Bus:vcsa2
[ 231.130894] PM: Adding info for No Bus:vcs3
[ 231.133917] PM: Adding info for No Bus:vcsa3
[ 236.594800] Capability LSM initialized
[ 237.034619] PM: Adding info for No Bus:parport0
[ 237.039139] ppdev: user-space parallel port driver
[ 239.729681] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 239.730291] PM: Adding info for No Bus:apm_bios
[ 243.107859] PM: Adding info for No Bus:vcs7
[ 243.111994] PM: Adding info for No Bus:vcsa7
[ 243.533096] [drm] Initialized drm 1.1.0 20060810
[ 243.627045] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 244.268157] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 244.268424] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 244.268673] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 244.577952] [drm] Setting GART location based on new memory map
[ 244.578022] [drm] writeback test succeeded in 1 usecs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-16 10:16 ` YUP
@ 2007-03-16 15:06 ` Albert Lee
2007-03-16 15:50 ` YUP
2007-03-16 22:37 ` YUP
0 siblings, 2 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-16 15:06 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
YUP wrote:
> Hi Albert,
>
>> 2. Turn off ATAPI DMA by adding one line of
>> { "CD-ROM 56X/AKH", NULL, ATA_HORKAGE_NODMA },
>> to ata_device_blacklist[] and see if it helps.
>
>
> Here is dmesg with blacklisted cdrom:
>
>
>
> ------------------------------------------------------------------------
<snip>
> [ 50.889690] eth0: no IPv6 routers present
> [ 62.013082] ata2.01: qc timeout (cmd 0xa0)
> [ 62.013098] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 62.013160] ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
> [ 62.013163] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
> [ 69.002638] ata2: port is slow to respond, please be patient (Status 0xd8)
> [ 91.984233] ata2: port failed to respond (30 secs, Status 0xd8)
> [ 91.984292] ata2: soft resetting port
> [ 92.151391] ATA: abnormal status 0x7F on port 0xE08515DF
> [ 92.162767] ATA: abnormal status 0x7F on port 0xE08515DF
> [ 92.323758] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
> [ 92.323766] ata2.01: revalidation failed (errno=-5)
> [ 92.323821] ata2: failed to recover some devices, retrying in 5 secs
> [ 97.320272] ata2: soft resetting port
> [ 97.487428] ATA: abnormal status 0x7F on port 0xE08515DF
> [ 97.498808] ATA: abnormal status 0x7F on port 0xE08515DF
> [ 97.660041] ata2.01: device is on DMA blacklist, disabling DMA
> [ 97.823822] ata2.01: configured for PIO4
> [ 97.823874] ata2: EH complete
> [ 127.798684] ata2.01: qc timeout (cmd 0xa0)
> [ 127.798702] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 127.798762] ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
> [ 127.798764] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
Hi Yarema,
The dmesg looks bad. The AOpen CD-956E/AKH doesn't work under PIO mode 4 either.
Device status 0x51 means "device error". The drive should interrupt the software to
report the error but it didn't and caused qc timeout eventually.
BTW, the problem only affect the ATAPI commands;
ATA commands (e.g. IDENTIFY PACKET DEVICE and set transfer mode) look fine.
I've checked some local forum about the AOpen CD-952E drive (close relative of CD-956E)
(http://www.arclink.com.tw/TopicProductList.do?p_id=495&page=2). It's said
that the AOpen 52x drives have quality issues and over-heat problem.
Some drive even stop working after 4-days of use.
So, I guess your AOpen 56x hardware is broken. If true, there is little hope we can
workaround it from the software.
Could you please check whether the IDE driver work for it? (Please configure the
IDE pdc202xx_new and deconfig the libata pata_pdc2027x driver, recompile/reboot
the kernel and try read some cd using the IDE driver.) Thanks.
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-16 15:06 ` Albert Lee
@ 2007-03-16 15:50 ` YUP
2007-03-17 13:29 ` Bartlomiej Zolnierkiewicz
2007-03-16 22:37 ` YUP
1 sibling, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-16 15:50 UTC (permalink / raw)
To: albertl; +Cc: linux-ide
Hi Albert,
I'll do it today and send you results.
Yarema
>
> Could you please check whether the IDE driver work for it? (Please configure the
> IDE pdc202xx_new and deconfig the libata pata_pdc2027x driver, recompile/reboot
> the kernel and try read some cd using the IDE driver.) Thanks.
>
> --
> albert
>
>
>
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-16 15:06 ` Albert Lee
2007-03-16 15:50 ` YUP
@ 2007-03-16 22:37 ` YUP
2007-03-17 3:24 ` Albert Lee
1 sibling, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-16 22:37 UTC (permalink / raw)
To: albertl; +Cc: linux-ide
Hi Albert,
I think my cdrom drive is broken. I did some test under windows by means
of nero-info tool and it shows that cdrom drive has not available
read/write speed. Here is summary:
Nero InfoTool 4.2.1.0
Drive Information
------------------
Drive : HP DVD Writer 200j
Type : DVD+R/RW Recorder
Firmware Version : 1.36
Buffer Size : 2 MB
Date : 02-07-24
Serial Number : DA33 110484
Vendor Specific : 020724
Drive Letter : E:\
Location : 0:0
Mechanism : Tray
Read Speed : 32 , 20 , 12 , 10 , 8 , 4 , 2 X
Write Speed : 12 , 8 , 4 , 2 X
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD-R DL : No
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : No
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : No
Write DVD-RW : No
Write DVD-R DL : No
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : No
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : Yes
Mount Rainier : No
SolidBurn : No
Labelflash : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16,
RAW SAO 96, RAW DAO 96
Region Protection Control : RPC II
Region : 2
Changes User : 4
Changes Vendor : 4
Drive Information
------------------
Drive : E-IDE CD-ROM 56X/AKH
Type : CD-ROM Drive
Firmware Version : A80
Buffer Size : 192 KB
Date : ?
Serial Number
Vendor Specific :
Drive Letter : D:\
Location : 1:1
Mechanism : Tray
Read Speed : n/a
Write Speed : n/a
Read CD Text : No
Return C2 Pointers : No
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD-R DL : No
Read DVD+R : No
Read DVD+RW : No
Read DVD+R DL : No
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes
Write CD-R : No
Write CD-RW : No
Write DVD-R : No
Write DVD-RW : No
Write DVD-R DL : No
Write DVD+R : No
Write DVD+RW : No
Write DVD+R DL : No
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : No
Mount Rainier : No
SolidBurn : No
Labelflash : No
Modes : n/a
Regards,
Yarema
> Could you please check whether the IDE driver work for it? (Please configure the
> IDE pdc202xx_new and deconfig the libata pata_pdc2027x driver, recompile/reboot
> the kernel and try read some cd using the IDE driver.) Thanks.
>
> --
> albert
>
>
>
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-16 22:37 ` YUP
@ 2007-03-17 3:24 ` Albert Lee
2007-03-17 9:09 ` YUP
0 siblings, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-17 3:24 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
YUP wrote:
> Hi Albert,
>
> I think my cdrom drive is broken. I did some test under windows by means
> of nero-info tool and it shows that cdrom drive has not available
> read/write speed. Here is summary:
>
Ok. Can windows or nero read any data out of the drive?
If not, we can be quite sure it's broken hardware.
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 3:24 ` Albert Lee
@ 2007-03-17 9:09 ` YUP
2007-03-17 10:51 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-17 9:09 UTC (permalink / raw)
To: albertl; +Cc: linux-ide
Hi Albert,
I confirm that windows can read data from this drive. Autoplay works
too. Even more, after I inserted dist into cdrom drive nero-info showed
speed 52X:
Drive Information
------------------
Drive : E-IDE CD-ROM 56X/AKH
Type : CD-ROM Drive
Firmware Version : A80
Buffer Size : 192 KB
Date : ?
Serial Number
Vendor Specific :
Drive Letter : D:\
Location : 1:1
Mechanism : Tray
Read Speed : 52 , 40 , 32 , 24 , 16 , 8 , 4 X
Write Speed : n/a
Read CD Text : No
Return C2 Pointers : No
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD-R DL : No
Read DVD+R : No
Read DVD+RW : No
Read DVD+R DL : No
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes
I tried to start linux box with inserted cd into drive but it didn't help.
Yarema
> Ok. Can windows or nero read any data out of the drive?
> If not, we can be quite sure it's broken hardware.
> --
> albert
>
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 9:09 ` YUP
@ 2007-03-17 10:51 ` Albert Lee
0 siblings, 0 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-17 10:51 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
YUP wrote:
> Hi Albert,
>
> I confirm that windows can read data from this drive. Autoplay works
> too. Even more, after I inserted dist into cdrom drive nero-info showed
> speed 52X:
>
> Drive Information
> ------------------
> Drive : E-IDE CD-ROM 56X/AKH
> Type : CD-ROM Drive
> Firmware Version : A80
> Buffer Size : 192 KB
> Date : ?
> Serial Number
> Vendor Specific :
> Drive Letter : D:\
> Location : 1:1
> Mechanism : Tray
> Read Speed : 52 , 40 , 32 , 24 , 16 , 8 , 4 X
> Write Speed : n/a
>
> Read CD Text : No
> Return C2 Pointers : No
> Read CD-R : Yes
> Read CD-RW : Yes
> Read DVD-ROM : No
> Read DVD-RAM : No
> Read DVD-R : No
> Read DVD-RW : No
> Read DVD-R DL : No
> Read DVD+R : No
> Read DVD+RW : No
> Read DVD+R DL : No
> Read BD-ROM : No
> Read BD-R : No
> Read BD-RE : No
> Read HD DVD-ROM : No
> Read HD DVD-R : No
> Read HD DVD-RW : No
> Read HD-BURN : No
> Read Digital Audio : Yes
> Read CD+G : No
> Read VideoCD : Yes
>
> I tried to start linux box with inserted cd into drive but it didn't help.
>
I don't know how windows works with it? Maybe uses polling to deal
with the lost irq?
Could you please keep the AOpen drive connected to the Promise adapter,
disconnect the HP drive from the Intel controller,
apply the attached patch, together with the previous debug patch and
{ "CD-ROM 56X/AKH", NULL, ATA_HORKAGE_NODMA } DMA blacklist, and see if it helps.
Thanks.
--
albert
--- linux-2.6.20.3-ori/drivers/ata/pata_pdc2027x.c 2007-03-14 02:27:08.000000000 +0800
+++ linux-2.6.20.3-mod/drivers/ata/pata_pdc2027x.c 2007-03-17 18:40:49.000000000 +0800
@@ -214,7 +214,7 @@ static struct ata_port_info pdc2027x_por
{
.sht = &pdc2027x_sht,
.flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
- ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -224,7 +224,7 @@ static struct ata_port_info pdc2027x_por
{
.sht = &pdc2027x_sht,
.flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
- ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6, /* udma0-6 */
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-16 15:50 ` YUP
@ 2007-03-17 13:29 ` Bartlomiej Zolnierkiewicz
2007-03-17 14:39 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-17 13:29 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
Hi,
Any news about this test? ide-cd driver is much more forgiving for
quirky hardware than libata+sr so please give it a try...
Bart
On Friday 16 March 2007, YUP wrote:
> Hi Albert,
> I'll do it today and send you results.
>
> Yarema
>
> >
> > Could you please check whether the IDE driver work for it? (Please configure the
> > IDE pdc202xx_new and deconfig the libata pata_pdc2027x driver, recompile/reboot
> > the kernel and try read some cd using the IDE driver.) Thanks.
> >
> > --
> > albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 13:29 ` Bartlomiej Zolnierkiewicz
@ 2007-03-17 14:39 ` Albert Lee
2007-03-17 15:00 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-17 14:39 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: YUP, albertl, linux-ide
Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> Any news about this test? ide-cd driver is much more forgiving for
> quirky hardware than libata+sr so please give it a try...
>
Hi Bart,
Yarema did the run test, but the AOpen drive was connected to the PIIX
controller, which is driven by libata:
[ 30.523140] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[ 30.523202] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[ 30.523232] scsi0 : ata_piix
[ 30.523249] PM: Adding info for No Bus:host0
[ 30.550217] usbcore: registered new interface driver usbfs
[ 30.550257] usbcore: registered new interface driver hub
[ 30.550298] usbcore: registered new device driver usb
[ 30.552764] USB Universal Host Controller Interface driver v3.0
[ 30.640707] Linux Tulip driver version 1.1.14 (May 11, 2002)
[ 30.841828] ata1.00: ATAPI, max UDMA/33
[ 30.863680] Floppy drive(s): fd0 is 1.44M
[ 30.940952] FDC 0 is a post-1991 82077
[ 30.958682] PM: Adding info for platform:floppy.0
[ 31.005533] ata1.00: configured for UDMA/33
[ 31.005560] scsi1 : ata_piix
[ 31.005593] PM: Adding info for No Bus:host1
[ 31.172448] ATA: abnormal status 0x7F on port 0x177
[ 31.333039] ata2.01: ATAPI, max MWDMA2
[ 31.496799] ata2.01: configured for MWDMA2
[ 31.496863] PM: Adding info for No Bus:target0:0:0
[ 31.499200] scsi 0:0:0:0: CD-ROM HP DVD Writer 200j 1.36 PQ: 0 ANSI: 5
[ 31.499214] PM: Adding info for scsi:0:0:0:0
[ 31.499783] PM: Adding info for No Bus:target1:0:1
[ 31.500477] scsi 1:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH A80 PQ: 0 ANSI: 5
[ 31.500492] PM: Adding info for scsi:1:0:1:0
...
[ 31.716631] PDC20269: IDE controller at PCI slot 0000:02:01.0
[ 31.716668] PDC20269: chipset revision 2
[ 31.716673] PDC20269: ROM enabled at 0x30020000
[ 31.726626] PDC20269: PLL input clock is 16565 kHz
[ 31.756376] PDC20269: 100% native mode on irq 21
[ 31.756387] ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
[ 31.757010] ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
[ 31.757027] Probing IDE interface ide2...
[ 32.044020] hde: SAMSUNG SP1203N, ATA DISK drive
[ 32.044077] PM: Adding info for No Bus:ide2
[ 32.388718] PM: Removing info for No Bus:vcs8
[ 32.388777] PM: Removing info for No Bus:vcsa8
[ 32.555258] hdf: Maxtor 6Y160P0, ATA DISK drive
[ 32.611416] ide2 at 0xa000-0xa007,0xa402 on irq 21
[ 32.611464] PM: Adding info for ide:2.0
[ 32.611842] PM: Adding info for ide:2.1
[ 32.612050] Probing IDE interface ide3...
[ 33.179031] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
[ 33.186241] eth0: ADMtek Comet rev 17 at Port 0xb400, 00:04:5A:8A:55:7B, IRQ 21.
[ 33.197996] hde: max request size: 512KiB
[ 33.207974] hde: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 33.208614] hde: cache flushes supported
[ 33.208697] hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 >
[ 33.248309] hdf: max request size: 512KiB
[ 33.248888] hdf: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
[ 33.249048] hdf: cache flushes supported
[ 33.249097] hdf: hdf1 hdf2 hdf3 < hdf5 hdf6 >
Hi Yurema,
Could you please redo the IDE test:
1. Connect the AOpen drive to the Promise controller.
2. Configure the IDE pdc202xx_new driver and remove the libata pata_pdc2027x driver.
3. Boot the kernel with IDE pdc202xx_new driver to see if IDE works ok with the AOpen drive?
Thanks.
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 14:39 ` Albert Lee
@ 2007-03-17 15:00 ` Bartlomiej Zolnierkiewicz
2007-03-17 18:38 ` YUP
` (2 more replies)
0 siblings, 3 replies; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-17 15:00 UTC (permalink / raw)
To: albertl; +Cc: YUP, linux-ide
On Saturday 17 March 2007, Albert Lee wrote:
> Bartlomiej Zolnierkiewicz wrote:
> > Hi,
> >
> > Any news about this test? ide-cd driver is much more forgiving for
> > quirky hardware than libata+sr so please give it a try...
> >
>
> Hi Bart,
> Yarema did the run test, but the AOpen drive was connected to the PIIX
> controller, which is driven by libata:
Which unfortunately says us nothing besides that pdc202xx_new works great
on this system... ;-)
Yarema, could you disable ata_piix, enable drivers/ide piix driver and retest?
Thanks,
Bart
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 15:00 ` Bartlomiej Zolnierkiewicz
@ 2007-03-17 18:38 ` YUP
2007-03-17 18:47 ` YUP
2007-03-18 6:42 ` YUP
2 siblings, 0 replies; 47+ messages in thread
From: YUP @ 2007-03-17 18:38 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
Sorry for delay I was a little bit busy. I'll do this tests today and
let you know about results.
Regards,
Yarema
Bartlomiej Zolnierkiewicz пише:
> On Saturday 17 March 2007, Albert Lee wrote:
>> Bartlomiej Zolnierkiewicz wrote:
>>> Hi,
>>>
>>> Any news about this test? ide-cd driver is much more forgiving for
>>> quirky hardware than libata+sr so please give it a try...
>>>
>> Hi Bart,
>> Yarema did the run test, but the AOpen drive was connected to the PIIX
>> controller, which is driven by libata:
>
> Which unfortunately says us nothing besides that pdc202xx_new works great
> on this system... ;-)
>
> Yarema, could you disable ata_piix, enable drivers/ide piix driver and retest?
>
> Thanks,
> Bart
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 15:00 ` Bartlomiej Zolnierkiewicz
2007-03-17 18:38 ` YUP
@ 2007-03-17 18:47 ` YUP
2007-03-17 19:12 ` Bartlomiej Zolnierkiewicz
2007-03-18 6:42 ` YUP
2 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-17 18:47 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
BTW, maybe I didn't understand you well, stupid question- what is
Promise controller? Is it normal ide controler on my motherboard or
attached ultra ATA 133/ PCI controller?
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset
Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP
Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 12)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
Audio (rev 12)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW
[Radeon 7500]
This one?
02:01.0 Mass storage controller: Promise Technology, Inc. 20269 (rev 02)
02:05.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast
Ethernet 10/100 (rev 11)
Bartlomiej Zolnierkiewicz пише:
> On Saturday 17 March 2007, Albert Lee wrote:
>> Bartlomiej Zolnierkiewicz wrote:
>>> Hi,
>>>
>>> Any news about this test? ide-cd driver is much more forgiving for
>>> quirky hardware than libata+sr so please give it a try...
>>>
>> Hi Bart,
>> Yarema did the run test, but the AOpen drive was connected to the PIIX
>> controller, which is driven by libata:
>
> Which unfortunately says us nothing besides that pdc202xx_new works great
> on this system... ;-)
>
> Yarema, could you disable ata_piix, enable drivers/ide piix driver and retest?
>
> Thanks,
> Bart
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 18:47 ` YUP
@ 2007-03-17 19:12 ` Bartlomiej Zolnierkiewicz
2007-03-17 19:22 ` YUP
0 siblings, 1 reply; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-17 19:12 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
On Saturday 17 March 2007, YUP wrote:
> BTW, maybe I didn't understand you well, stupid question- what is
> Promise controller? Is it normal ide controler on my motherboard or
> attached ultra ATA 133/ PCI controller?
attached one
> 00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset
> Host Bridge (rev 03)
> 00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP
> Bridge (rev 03)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 12)
> 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 12)
> 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 12)
> 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 12)
> 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 12)
> 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 12)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
> Audio (rev 12)
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW
> [Radeon 7500]
>
> This one?
>
> 02:01.0 Mass storage controller: Promise Technology, Inc. 20269 (rev 02)
Yes.
However you have the "problematic" drive on the on-board Intel controller so
please disable ata_piix libata driver, enable piix IDE driver and retest. :-)
Thanks,
Bart
> 02:05.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast
> Ethernet 10/100 (rev 11)
>
>
>
> Bartlomiej Zolnierkiewicz пише:
> > On Saturday 17 March 2007, Albert Lee wrote:
> >> Bartlomiej Zolnierkiewicz wrote:
> >>> Hi,
> >>>
> >>> Any news about this test? ide-cd driver is much more forgiving for
> >>> quirky hardware than libata+sr so please give it a try...
> >>>
> >> Hi Bart,
> >> Yarema did the run test, but the AOpen drive was connected to the PIIX
> >> controller, which is driven by libata:
> >
> > Which unfortunately says us nothing besides that pdc202xx_new works great
> > on this system... ;-)
> >
> > Yarema, could you disable ata_piix, enable drivers/ide piix driver and retest?
> >
> > Thanks,
> > Bart
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 19:12 ` Bartlomiej Zolnierkiewicz
@ 2007-03-17 19:22 ` YUP
2007-03-17 20:07 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-17 19:22 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
[-- Attachment #1: Type: text/plain, Size: 62 bytes --]
Just to check up can you recheck my config?
Thanks,
Yarema
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 78439 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20.3
# Sat Mar 17 20:02:46 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_EFI=y
CONFIG_BOOT_IOREMAP=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
CONFIG_PM_TRACE=y
CONFIG_PM_SYSFS_DEPRECATED=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=2000
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_DMASCC=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
CONFIG_IBM_ASM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_MSI_LAPTOP=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=m
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_PROBE_EISA_VL=y
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_FD_MCS=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=m
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
# CONFIG_IBMMCA_SCSI_DEV_RESET is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR_D700=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_NCR_Q720=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
CONFIG_SCSI_MCA_53C9X=m
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_SIM710=m
CONFIG_53C700_IO_MAPPED=y
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=m
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_QDI=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RZ1000=m
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=m
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
# CONFIG_PATA_WINBOND_VLB is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Macintosh device drivers
#
CONFIG_MAC_EMUMOUSEBTN=y
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
# CONFIG_FIXED_MII_100_FDX is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_ELMC=m
CONFIG_ELMC_II=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRAMCA=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCMCIA_XIRTULIP=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
CONFIG_NE2_MCA=m
CONFIG_IBMLANA=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_CS89x0=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_LNE390=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_ES3210=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_MADGEMC=m
CONFIG_SMCTR=m
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
# CONFIG_ESPSERIAL is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_OSS=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CAFE_CCIC=m
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
# CONFIG_RADIO_TYPHOON_PROC_FS is not set
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
CONFIG_DVB_TUNER_LGH06XF=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_VESA is not set
CONFIG_FB_IMAC=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_GX=m
# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not set
CONFIG_SOUND_TVMIXER=m
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Virtualization
#
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_PARAVIRT is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 19:22 ` YUP
@ 2007-03-17 20:07 ` Bartlomiej Zolnierkiewicz
2007-03-18 10:07 ` YUP
0 siblings, 1 reply; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-17 20:07 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
On Saturday 17 March 2007, YUP wrote:
> Just to check up can you recheck my config?
Looks fine but please set CONFIG_ATA_PIIX to "n" (just in case).
Bart
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 15:00 ` Bartlomiej Zolnierkiewicz
2007-03-17 18:38 ` YUP
2007-03-17 18:47 ` YUP
@ 2007-03-18 6:42 ` YUP
2 siblings, 0 replies; 47+ messages in thread
From: YUP @ 2007-03-18 6:42 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
[-- Attachment #1: Type: text/plain, Size: 328 bytes --]
Hi Bartek and Albert,
I did the test. Well, this time I have both - cd and dvd drives. I
attached my dmesg.
Yarema
> Which unfortunately says us nothing besides that pdc202xx_new works great
> on this system... ;-)
>
> Yarema, could you disable ata_piix, enable drivers/ide piix driver and retest?
>
> Thanks,
> Bart
>
[-- Attachment #2: dmesg_output_ide --]
[-- Type: text/plain, Size: 64211 bytes --]
[ 0.000000] Linux version 2.6.20.3 (root@zaraza) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 Fri Mar 16 17:07:50 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c80
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f6710
[ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6800
[ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:1 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1800.160 MHz processor.
[ 21.710785] Built 1 zonelists. Total pages: 130033
[ 21.710788] Kernel command line: root=UUID=bdcb0225-6620-4d74-9fe5-2f008da464c7 ro quiet splash
[ 21.711034] mapped APIC to ffffd000 (fee00000)
[ 21.711037] mapped IOAPIC to ffffc000 (fec00000)
[ 21.711043] Enabling fast FPU save and restore... done.
[ 21.711047] Enabling unmasked SIMD FPU exception support... done.
[ 21.711072] Initializing CPU#0
[ 21.711194] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 21.712878] Console: colour VGA+ 80x25
[ 21.713540] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.714210] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.736853] Memory: 474616k/524224k available (1898k kernel code, 48984k reserved, 850k data, 320k init, 0k highmem)
[ 21.736866] virtual kernel memory layout:
[ 21.736868] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 21.736870] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.736871] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 21.736873] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 21.736875] .init : 0xc03b2000 - 0xc0402000 ( 320 kB)
[ 21.736876] .data : 0xc02dab73 - 0xc03af434 ( 850 kB)
[ 21.736878] .text : 0xc0100000 - 0xc02dab73 (1898 kB)
[ 21.736882] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.815045] Calibrating delay using timer specific routine.. 3603.21 BogoMIPS (lpj=7206434)
[ 21.815095] Security Framework v1.0.0 initialized
[ 21.815107] SELinux: Disabled at boot.
[ 21.815124] Mount-cache hash table entries: 512
[ 21.815283] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 21.815298] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 21.815301] CPU: L2 cache: 256K
[ 21.815304] CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000
[ 21.815335] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
[ 21.815347] Checking 'hlt' instruction... OK.
[ 21.831724] ExtINT not setup in hardware but reported by MP table
[ 21.831809] ENABLING IO-APIC IRQs
[ 21.832047] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 21.978900] PM: Adding info for No Bus:platform
[ 21.979143] Booting paravirtualized kernel on bare hardware
[ 21.979260] Time: 21:21:38 Date: 02/16/107
[ 21.979319] NET: Registered protocol family 16
[ 21.979377] PM: Adding info for No Bus:vtcon0
[ 21.979517] EISA bus registered
[ 22.005146] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=2
[ 22.005150] PCI: Using configuration type 1
[ 22.005153] Setting up standard PCI resources
[ 22.011855] ACPI: Interpreter disabled.
[ 22.011864] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.011884] pnp: PnP ACPI: disabled
[ 22.011888] PnPBIOS: Scanning system for PnP BIOS support...
[ 22.011944] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc20
[ 22.011948] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc50, dseg 0xf0000
[ 22.011964] PM: Adding info for No Bus:pnp0
[ 22.012001] PM: Adding info for pnp:00:00
[ 22.012115] PM: Adding info for pnp:00:01
[ 22.012172] PM: Adding info for pnp:00:02
[ 22.012224] PM: Adding info for pnp:00:03
[ 22.012274] PM: Adding info for pnp:00:04
[ 22.012337] PM: Adding info for pnp:00:05
[ 22.012393] PM: Adding info for pnp:00:06
[ 22.012446] PM: Adding info for pnp:00:07
[ 22.012497] PM: Adding info for pnp:00:08
[ 22.012555] PM: Adding info for pnp:00:09
[ 22.012608] PM: Adding info for pnp:00:0a
[ 22.012673] PM: Adding info for pnp:00:0b
[ 22.012768] PM: Adding info for pnp:00:0c
[ 22.012845] PM: Adding info for pnp:00:0d
[ 22.012949] PM: Adding info for pnp:00:0f
[ 22.013044] PM: Adding info for pnp:00:10
[ 22.013134] PM: Adding info for pnp:00:11
[ 22.013224] PM: Adding info for pnp:00:12
[ 22.013279] PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
[ 22.013354] PCI: Probing PCI hardware
[ 22.013361] PCI: Probing PCI hardware (bus 00)
[ 22.013371] PM: Adding info for No Bus:pci0000:00
[ 22.013640] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 22.013646] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 22.014012] Boot video device is 0000:01:00.0
[ 22.014250] PCI: Transparent bridge - 0000:00:1e.0
[ 22.014278] PM: Adding info for pci:0000:00:00.0
[ 22.014347] PM: Adding info for pci:0000:00:01.0
[ 22.014404] PM: Adding info for pci:0000:00:1e.0
[ 22.014456] PM: Adding info for pci:0000:00:1f.0
[ 22.014510] PM: Adding info for pci:0000:00:1f.1
[ 22.014579] PM: Adding info for pci:0000:00:1f.2
[ 22.014633] PM: Adding info for pci:0000:00:1f.3
[ 22.014689] PM: Adding info for pci:0000:00:1f.4
[ 22.014769] PM: Adding info for pci:0000:00:1f.5
[ 22.014832] PM: Adding info for pci:0000:01:00.0
[ 22.014894] PM: Adding info for pci:0000:02:01.0
[ 22.014948] PM: Adding info for pci:0000:02:05.0
[ 22.015099] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
[ 22.015120] PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19
[ 22.015125] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
[ 22.015129] PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 23
[ 22.015133] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
[ 22.015137] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 22.015141] PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 21
[ 22.015145] PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 21
[ 22.030443] NET: Registered protocol family 8
[ 22.030446] NET: Registered protocol family 20
[ 22.030613] PM: Adding info for No Bus:mem
[ 22.030673] PM: Adding info for No Bus:kmem
[ 22.030715] PM: Adding info for No Bus:null
[ 22.030770] PM: Adding info for No Bus:port
[ 22.030826] PM: Adding info for No Bus:zero
[ 22.030866] PM: Adding info for No Bus:full
[ 22.030904] PM: Adding info for No Bus:random
[ 22.030946] PM: Adding info for No Bus:urandom
[ 22.030985] PM: Adding info for No Bus:kmsg
[ 22.031023] PM: Adding info for No Bus:oldmem
[ 22.031100] PCI: Bridge: 0000:00:01.0
[ 22.031104] IO window: c000-cfff
[ 22.031109] MEM window: ec000000-edffffff
[ 22.031114] PREFETCH window: e0000000-e7ffffff
[ 22.031120] PCI: Bridge: 0000:00:1e.0
[ 22.031123] IO window: a000-bfff
[ 22.031130] MEM window: ee000000-efffffff
[ 22.031135] PREFETCH window: 30000000-300fffff
[ 22.031158] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 22.031207] NET: Registered protocol family 2
[ 22.058780] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 22.058921] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 22.059012] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 22.059062] TCP: Hash tables configured (established 16384 bind 8192)
[ 22.059066] TCP reno registered
[ 22.070890] checking if image is initramfs... it is
[ 27.506291] Freeing initrd memory: 41014k freed
[ 27.506611] PM: Adding info for platform:pcspkr
[ 27.507009] PM: Adding info for No Bus:snapshot
[ 27.507058] audit: initializing netlink socket (disabled)
[ 27.507084] audit(1174080102.888:1): initialized
[ 27.507289] VFS: Disk quotas dquot_6.5.1
[ 27.507326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.507425] io scheduler noop registered
[ 27.507430] io scheduler anticipatory registered
[ 27.507433] io scheduler deadline registered
[ 27.507452] io scheduler cfq registered (default)
[ 27.507831] PM: Adding info for No Bus:pnp1
[ 27.507842] isapnp: Scanning for PnP cards...
[ 27.861570] isapnp: No Plug & Play device found
[ 27.861606] PM: Adding info for No Bus:tty
[ 27.861668] PM: Adding info for No Bus:console
[ 27.861713] PM: Adding info for No Bus:ptmx
[ 27.861752] PM: Adding info for No Bus:tty0
[ 27.861813] PM: Adding info for No Bus:vcs
[ 27.861855] PM: Adding info for No Bus:vcsa
[ 27.861915] PM: Adding info for No Bus:tty1
[ 27.861959] PM: Adding info for No Bus:tty2
[ 27.862009] PM: Adding info for No Bus:tty3
[ 27.862047] PM: Adding info for No Bus:tty4
[ 27.862087] PM: Adding info for No Bus:tty5
[ 27.862124] PM: Adding info for No Bus:tty6
[ 27.862163] PM: Adding info for No Bus:tty7
[ 27.862210] PM: Adding info for No Bus:tty8
[ 27.862254] PM: Adding info for No Bus:tty9
[ 27.862292] PM: Adding info for No Bus:tty10
[ 27.862341] PM: Adding info for No Bus:tty11
[ 27.862382] PM: Adding info for No Bus:tty12
[ 27.862424] PM: Adding info for No Bus:tty13
[ 27.862474] PM: Adding info for No Bus:tty14
[ 27.862517] PM: Adding info for No Bus:tty15
[ 27.862555] PM: Adding info for No Bus:tty16
[ 27.862600] PM: Adding info for No Bus:tty17
[ 27.862642] PM: Adding info for No Bus:tty18
[ 27.862684] PM: Adding info for No Bus:tty19
[ 27.862727] PM: Adding info for No Bus:tty20
[ 27.862780] PM: Adding info for No Bus:tty21
[ 27.862825] PM: Adding info for No Bus:tty22
[ 27.862871] PM: Adding info for No Bus:tty23
[ 27.862913] PM: Adding info for No Bus:tty24
[ 27.862958] PM: Adding info for No Bus:tty25
[ 27.862999] PM: Adding info for No Bus:tty26
[ 27.863049] PM: Adding info for No Bus:tty27
[ 27.863091] PM: Adding info for No Bus:tty28
[ 27.863135] PM: Adding info for No Bus:tty29
[ 27.863176] PM: Adding info for No Bus:tty30
[ 27.863222] PM: Adding info for No Bus:tty31
[ 27.863267] PM: Adding info for No Bus:tty32
[ 27.863313] PM: Adding info for No Bus:tty33
[ 27.863365] PM: Adding info for No Bus:tty34
[ 27.863410] PM: Adding info for No Bus:tty35
[ 27.863451] PM: Adding info for No Bus:tty36
[ 27.863496] PM: Adding info for No Bus:tty37
[ 27.863542] PM: Adding info for No Bus:tty38
[ 27.863587] PM: Adding info for No Bus:tty39
[ 27.863639] PM: Adding info for No Bus:tty40
[ 27.863690] PM: Adding info for No Bus:tty41
[ 27.863732] PM: Adding info for No Bus:tty42
[ 27.863775] PM: Adding info for No Bus:tty43
[ 27.863822] PM: Adding info for No Bus:tty44
[ 27.863867] PM: Adding info for No Bus:tty45
[ 27.863909] PM: Adding info for No Bus:tty46
[ 27.863969] PM: Adding info for No Bus:tty47
[ 27.864016] PM: Adding info for No Bus:tty48
[ 27.864062] PM: Adding info for No Bus:tty49
[ 27.864115] PM: Adding info for No Bus:tty50
[ 27.864161] PM: Adding info for No Bus:tty51
[ 27.864206] PM: Adding info for No Bus:tty52
[ 27.864263] PM: Adding info for No Bus:tty53
[ 27.864309] PM: Adding info for No Bus:tty54
[ 27.864356] PM: Adding info for No Bus:tty55
[ 27.864403] PM: Adding info for No Bus:tty56
[ 27.864453] PM: Adding info for No Bus:tty57
[ 27.864499] PM: Adding info for No Bus:tty58
[ 27.864550] PM: Adding info for No Bus:tty59
[ 27.864606] PM: Adding info for No Bus:tty60
[ 27.864652] PM: Adding info for No Bus:tty61
[ 27.864700] PM: Adding info for No Bus:tty62
[ 27.864747] PM: Adding info for No Bus:tty63
[ 27.864883] PM: Adding info for No Bus:ptyp0
[ 27.864945] PM: Adding info for No Bus:ptyp1
[ 27.865002] PM: Adding info for No Bus:ptyp2
[ 27.865054] PM: Adding info for No Bus:ptyp3
[ 27.865101] PM: Adding info for No Bus:ptyp4
[ 27.865147] PM: Adding info for No Bus:ptyp5
[ 27.865190] PM: Adding info for No Bus:ptyp6
[ 27.865243] PM: Adding info for No Bus:ptyp7
[ 27.865290] PM: Adding info for No Bus:ptyp8
[ 27.865350] PM: Adding info for No Bus:ptyp9
[ 27.865396] PM: Adding info for No Bus:ptypa
[ 27.865445] PM: Adding info for No Bus:ptypb
[ 27.865489] PM: Adding info for No Bus:ptypc
[ 27.865540] PM: Adding info for No Bus:ptypd
[ 27.865588] PM: Adding info for No Bus:ptype
[ 27.865648] PM: Adding info for No Bus:ptypf
[ 27.865698] PM: Adding info for No Bus:ptyq0
[ 27.865748] PM: Adding info for No Bus:ptyq1
[ 27.865796] PM: Adding info for No Bus:ptyq2
[ 27.865858] PM: Adding info for No Bus:ptyq3
[ 27.865908] PM: Adding info for No Bus:ptyq4
[ 27.865955] PM: Adding info for No Bus:ptyq5
[ 27.866082] PM: Adding info for No Bus:ptyq6
[ 27.866136] PM: Adding info for No Bus:ptyq7
[ 27.866182] PM: Adding info for No Bus:ptyq8
[ 27.866233] PM: Adding info for No Bus:ptyq9
[ 27.866282] PM: Adding info for No Bus:ptyqa
[ 27.866333] PM: Adding info for No Bus:ptyqb
[ 27.866392] PM: Adding info for No Bus:ptyqc
[ 27.866446] PM: Adding info for No Bus:ptyqd
[ 27.866495] PM: Adding info for No Bus:ptyqe
[ 27.866552] PM: Adding info for No Bus:ptyqf
[ 27.866606] PM: Adding info for No Bus:ptyr0
[ 27.866659] PM: Adding info for No Bus:ptyr1
[ 27.866714] PM: Adding info for No Bus:ptyr2
[ 27.866781] PM: Adding info for No Bus:ptyr3
[ 27.866832] PM: Adding info for No Bus:ptyr4
[ 27.866885] PM: Adding info for No Bus:ptyr5
[ 27.866935] PM: Adding info for No Bus:ptyr6
[ 27.866987] PM: Adding info for No Bus:ptyr7
[ 27.867042] PM: Adding info for No Bus:ptyr8
[ 27.867102] PM: Adding info for No Bus:ptyr9
[ 27.867161] PM: Adding info for No Bus:ptyra
[ 27.867222] PM: Adding info for No Bus:ptyrb
[ 27.867275] PM: Adding info for No Bus:ptyrc
[ 27.867327] PM: Adding info for No Bus:ptyrd
[ 27.867384] PM: Adding info for No Bus:ptyre
[ 27.867440] PM: Adding info for No Bus:ptyrf
[ 27.867507] PM: Adding info for No Bus:ptys0
[ 27.867565] PM: Adding info for No Bus:ptys1
[ 27.867618] PM: Adding info for No Bus:ptys2
[ 27.867673] PM: Adding info for No Bus:ptys3
[ 27.867731] PM: Adding info for No Bus:ptys4
[ 27.867786] PM: Adding info for No Bus:ptys5
[ 27.867852] PM: Adding info for No Bus:ptys6
[ 27.867914] PM: Adding info for No Bus:ptys7
[ 27.867972] PM: Adding info for No Bus:ptys8
[ 27.868030] PM: Adding info for No Bus:ptys9
[ 27.868090] PM: Adding info for No Bus:ptysa
[ 27.868147] PM: Adding info for No Bus:ptysb
[ 27.868202] PM: Adding info for No Bus:ptysc
[ 27.868277] PM: Adding info for No Bus:ptysd
[ 27.868332] PM: Adding info for No Bus:ptyse
[ 27.868389] PM: Adding info for No Bus:ptysf
[ 27.868448] PM: Adding info for No Bus:ptyt0
[ 27.868505] PM: Adding info for No Bus:ptyt1
[ 27.868566] PM: Adding info for No Bus:ptyt2
[ 27.868645] PM: Adding info for No Bus:ptyt3
[ 27.868705] PM: Adding info for No Bus:ptyt4
[ 27.868764] PM: Adding info for No Bus:ptyt5
[ 27.868824] PM: Adding info for No Bus:ptyt6
[ 27.868886] PM: Adding info for No Bus:ptyt7
[ 27.868948] PM: Adding info for No Bus:ptyt8
[ 27.869010] PM: Adding info for No Bus:ptyt9
[ 27.869081] PM: Adding info for No Bus:ptyta
[ 27.869147] PM: Adding info for No Bus:ptytb
[ 27.869212] PM: Adding info for No Bus:ptytc
[ 27.869275] PM: Adding info for No Bus:ptytd
[ 27.869338] PM: Adding info for No Bus:ptyte
[ 27.869408] PM: Adding info for No Bus:ptytf
[ 27.869480] PM: Adding info for No Bus:ptyu0
[ 27.869544] PM: Adding info for No Bus:ptyu1
[ 27.869607] PM: Adding info for No Bus:ptyu2
[ 27.869674] PM: Adding info for No Bus:ptyu3
[ 27.869737] PM: Adding info for No Bus:ptyu4
[ 27.869802] PM: Adding info for No Bus:ptyu5
[ 27.869913] PM: Adding info for No Bus:ptyu6
[ 27.870040] PM: Adding info for No Bus:ptyu7
[ 27.870119] PM: Adding info for No Bus:ptyu8
[ 27.870186] PM: Adding info for No Bus:ptyu9
[ 27.870249] PM: Adding info for No Bus:ptyua
[ 27.870319] PM: Adding info for No Bus:ptyub
[ 27.870383] PM: Adding info for No Bus:ptyuc
[ 27.870454] PM: Adding info for No Bus:ptyud
[ 27.870526] PM: Adding info for No Bus:ptyue
[ 27.870591] PM: Adding info for No Bus:ptyuf
[ 27.870651] PM: Adding info for No Bus:ptyv0
[ 27.870714] PM: Adding info for No Bus:ptyv1
[ 27.870776] PM: Adding info for No Bus:ptyv2
[ 27.870845] PM: Adding info for No Bus:ptyv3
[ 27.870937] PM: Adding info for No Bus:ptyv4
[ 27.871005] PM: Adding info for No Bus:ptyv5
[ 27.871075] PM: Adding info for No Bus:ptyv6
[ 27.871146] PM: Adding info for No Bus:ptyv7
[ 27.871214] PM: Adding info for No Bus:ptyv8
[ 27.871280] PM: Adding info for No Bus:ptyv9
[ 27.871359] PM: Adding info for No Bus:ptyva
[ 27.871431] PM: Adding info for No Bus:ptyvb
[ 27.871497] PM: Adding info for No Bus:ptyvc
[ 27.871567] PM: Adding info for No Bus:ptyvd
[ 27.871638] PM: Adding info for No Bus:ptyve
[ 27.871703] PM: Adding info for No Bus:ptyvf
[ 27.871776] PM: Adding info for No Bus:ptyw0
[ 27.871856] PM: Adding info for No Bus:ptyw1
[ 27.871926] PM: Adding info for No Bus:ptyw2
[ 27.872000] PM: Adding info for No Bus:ptyw3
[ 27.872069] PM: Adding info for No Bus:ptyw4
[ 27.872139] PM: Adding info for No Bus:ptyw5
[ 27.872214] PM: Adding info for No Bus:ptyw6
[ 27.872295] PM: Adding info for No Bus:ptyw7
[ 27.872368] PM: Adding info for No Bus:ptyw8
[ 27.872446] PM: Adding info for No Bus:ptyw9
[ 27.872516] PM: Adding info for No Bus:ptywa
[ 27.872588] PM: Adding info for No Bus:ptywb
[ 27.872664] PM: Adding info for No Bus:ptywc
[ 27.872736] PM: Adding info for No Bus:ptywd
[ 27.872817] PM: Adding info for No Bus:ptywe
[ 27.872897] PM: Adding info for No Bus:ptywf
[ 27.872972] PM: Adding info for No Bus:ptyx0
[ 27.873045] PM: Adding info for No Bus:ptyx1
[ 27.873122] PM: Adding info for No Bus:ptyx2
[ 27.873201] PM: Adding info for No Bus:ptyx3
[ 27.873288] PM: Adding info for No Bus:ptyx4
[ 27.873370] PM: Adding info for No Bus:ptyx5
[ 27.873445] PM: Adding info for No Bus:ptyx6
[ 27.873518] PM: Adding info for No Bus:ptyx7
[ 27.873596] PM: Adding info for No Bus:ptyx8
[ 27.873676] PM: Adding info for No Bus:ptyx9
[ 27.873755] PM: Adding info for No Bus:ptyxa
[ 27.873911] PM: Adding info for No Bus:ptyxb
[ 27.874065] PM: Adding info for No Bus:ptyxc
[ 27.874154] PM: Adding info for No Bus:ptyxd
[ 27.874239] PM: Adding info for No Bus:ptyxe
[ 27.874318] PM: Adding info for No Bus:ptyxf
[ 27.874396] PM: Adding info for No Bus:ptyy0
[ 27.874482] PM: Adding info for No Bus:ptyy1
[ 27.874561] PM: Adding info for No Bus:ptyy2
[ 27.874640] PM: Adding info for No Bus:ptyy3
[ 27.874720] PM: Adding info for No Bus:ptyy4
[ 27.874797] PM: Adding info for No Bus:ptyy5
[ 27.874875] PM: Adding info for No Bus:ptyy6
[ 27.874957] PM: Adding info for No Bus:ptyy7
[ 27.875050] PM: Adding info for No Bus:ptyy8
[ 27.875129] PM: Adding info for No Bus:ptyy9
[ 27.875210] PM: Adding info for No Bus:ptyya
[ 27.875298] PM: Adding info for No Bus:ptyyb
[ 27.875378] PM: Adding info for No Bus:ptyyc
[ 27.875463] PM: Adding info for No Bus:ptyyd
[ 27.875551] PM: Adding info for No Bus:ptyye
[ 27.875630] PM: Adding info for No Bus:ptyyf
[ 27.875714] PM: Adding info for No Bus:ptyz0
[ 27.875800] PM: Adding info for No Bus:ptyz1
[ 27.875881] PM: Adding info for No Bus:ptyz2
[ 27.875970] PM: Adding info for No Bus:ptyz3
[ 27.876052] PM: Adding info for No Bus:ptyz4
[ 27.876144] PM: Adding info for No Bus:ptyz5
[ 27.876232] PM: Adding info for No Bus:ptyz6
[ 27.876313] PM: Adding info for No Bus:ptyz7
[ 27.876391] PM: Adding info for No Bus:ptyz8
[ 27.876481] PM: Adding info for No Bus:ptyz9
[ 27.876569] PM: Adding info for No Bus:ptyza
[ 27.876666] PM: Adding info for No Bus:ptyzb
[ 27.876766] PM: Adding info for No Bus:ptyzc
[ 27.876856] PM: Adding info for No Bus:ptyzd
[ 27.876943] PM: Adding info for No Bus:ptyze
[ 27.877036] PM: Adding info for No Bus:ptyzf
[ 27.877129] PM: Adding info for No Bus:ptya0
[ 27.877221] PM: Adding info for No Bus:ptya1
[ 27.877335] PM: Adding info for No Bus:ptya2
[ 27.877426] PM: Adding info for No Bus:ptya3
[ 27.877512] PM: Adding info for No Bus:ptya4
[ 27.877602] PM: Adding info for No Bus:ptya5
[ 27.877693] PM: Adding info for No Bus:ptya6
[ 27.877786] PM: Adding info for No Bus:ptya7
[ 27.877949] PM: Adding info for No Bus:ptya8
[ 27.878124] PM: Adding info for No Bus:ptya9
[ 27.878225] PM: Adding info for No Bus:ptyaa
[ 27.878323] PM: Adding info for No Bus:ptyab
[ 27.878415] PM: Adding info for No Bus:ptyac
[ 27.878509] PM: Adding info for No Bus:ptyad
[ 27.878606] PM: Adding info for No Bus:ptyae
[ 27.878716] PM: Adding info for No Bus:ptyaf
[ 27.878808] PM: Adding info for No Bus:ptyb0
[ 27.878903] PM: Adding info for No Bus:ptyb1
[ 27.879000] PM: Adding info for No Bus:ptyb2
[ 27.879094] PM: Adding info for No Bus:ptyb3
[ 27.879193] PM: Adding info for No Bus:ptyb4
[ 27.879298] PM: Adding info for No Bus:ptyb5
[ 27.879394] PM: Adding info for No Bus:ptyb6
[ 27.879498] PM: Adding info for No Bus:ptyb7
[ 27.879595] PM: Adding info for No Bus:ptyb8
[ 27.879694] PM: Adding info for No Bus:ptyb9
[ 27.879798] PM: Adding info for No Bus:ptyba
[ 27.879904] PM: Adding info for No Bus:ptybb
[ 27.880017] PM: Adding info for No Bus:ptybc
[ 27.880122] PM: Adding info for No Bus:ptybd
[ 27.880224] PM: Adding info for No Bus:ptybe
[ 27.880321] PM: Adding info for No Bus:ptybf
[ 27.880425] PM: Adding info for No Bus:ptyc0
[ 27.880530] PM: Adding info for No Bus:ptyc1
[ 27.880640] PM: Adding info for No Bus:ptyc2
[ 27.880767] PM: Adding info for No Bus:ptyc3
[ 27.880881] PM: Adding info for No Bus:ptyc4
[ 27.880988] PM: Adding info for No Bus:ptyc5
[ 27.881099] PM: Adding info for No Bus:ptyc6
[ 27.881206] PM: Adding info for No Bus:ptyc7
[ 27.881309] PM: Adding info for No Bus:ptyc8
[ 27.881429] PM: Adding info for No Bus:ptyc9
[ 27.881536] PM: Adding info for No Bus:ptyca
[ 27.881642] PM: Adding info for No Bus:ptycb
[ 27.881752] PM: Adding info for No Bus:ptycc
[ 27.881910] PM: Adding info for No Bus:ptycd
[ 27.882099] PM: Adding info for No Bus:ptyce
[ 27.882233] PM: Adding info for No Bus:ptycf
[ 27.882342] PM: Adding info for No Bus:ptyd0
[ 27.882444] PM: Adding info for No Bus:ptyd1
[ 27.882544] PM: Adding info for No Bus:ptyd2
[ 27.882658] PM: Adding info for No Bus:ptyd3
[ 27.882768] PM: Adding info for No Bus:ptyd4
[ 27.882877] PM: Adding info for No Bus:ptyd5
[ 27.883008] PM: Adding info for No Bus:ptyd6
[ 27.883118] PM: Adding info for No Bus:ptyd7
[ 27.883232] PM: Adding info for No Bus:ptyd8
[ 27.883348] PM: Adding info for No Bus:ptyd9
[ 27.883461] PM: Adding info for No Bus:ptyda
[ 27.883584] PM: Adding info for No Bus:ptydb
[ 27.883712] PM: Adding info for No Bus:ptydc
[ 27.883832] PM: Adding info for No Bus:ptydd
[ 27.883944] PM: Adding info for No Bus:ptyde
[ 27.884063] PM: Adding info for No Bus:ptydf
[ 27.884182] PM: Adding info for No Bus:ptye0
[ 27.884301] PM: Adding info for No Bus:ptye1
[ 27.884429] PM: Adding info for No Bus:ptye2
[ 27.884569] PM: Adding info for No Bus:ptye3
[ 27.884692] PM: Adding info for No Bus:ptye4
[ 27.884818] PM: Adding info for No Bus:ptye5
[ 27.884937] PM: Adding info for No Bus:ptye6
[ 27.885060] PM: Adding info for No Bus:ptye7
[ 27.885188] PM: Adding info for No Bus:ptye8
[ 27.885324] PM: Adding info for No Bus:ptye9
[ 27.885447] PM: Adding info for No Bus:ptyea
[ 27.885575] PM: Adding info for No Bus:ptyeb
[ 27.885697] PM: Adding info for No Bus:ptyec
[ 27.885892] PM: Adding info for No Bus:ptyed
[ 27.886123] PM: Adding info for No Bus:ptyee
[ 27.886268] PM: Adding info for No Bus:ptyef
[ 27.886425] PM: Adding info for No Bus:ttyp0
[ 27.886551] PM: Adding info for No Bus:ttyp1
[ 27.886664] PM: Adding info for No Bus:ttyp2
[ 27.886793] PM: Adding info for No Bus:ttyp3
[ 27.886910] PM: Adding info for No Bus:ttyp4
[ 27.887024] PM: Adding info for No Bus:ttyp5
[ 27.887153] PM: Adding info for No Bus:ttyp6
[ 27.887269] PM: Adding info for No Bus:ttyp7
[ 27.887385] PM: Adding info for No Bus:ttyp8
[ 27.887505] PM: Adding info for No Bus:ttyp9
[ 27.887628] PM: Adding info for No Bus:ttypa
[ 27.887756] PM: Adding info for No Bus:ttypb
[ 27.887881] PM: Adding info for No Bus:ttypc
[ 27.888021] PM: Adding info for No Bus:ttypd
[ 27.888151] PM: Adding info for No Bus:ttype
[ 27.888289] PM: Adding info for No Bus:ttypf
[ 27.888414] PM: Adding info for No Bus:ttyq0
[ 27.888542] PM: Adding info for No Bus:ttyq1
[ 27.888673] PM: Adding info for No Bus:ttyq2
[ 27.888818] PM: Adding info for No Bus:ttyq3
[ 27.888952] PM: Adding info for No Bus:ttyq4
[ 27.889081] PM: Adding info for No Bus:ttyq5
[ 27.889206] PM: Adding info for No Bus:ttyq6
[ 27.889333] PM: Adding info for No Bus:ttyq7
[ 27.889461] PM: Adding info for No Bus:ttyq8
[ 27.889598] PM: Adding info for No Bus:ttyq9
[ 27.889745] PM: Adding info for No Bus:ttyqa
[ 27.890047] PM: Adding info for No Bus:ttyqb
[ 27.890218] PM: Adding info for No Bus:ttyqc
[ 27.890351] PM: Adding info for No Bus:ttyqd
[ 27.890479] PM: Adding info for No Bus:ttyqe
[ 27.890605] PM: Adding info for No Bus:ttyqf
[ 27.890743] PM: Adding info for No Bus:ttyr0
[ 27.890878] PM: Adding info for No Bus:ttyr1
[ 27.891008] PM: Adding info for No Bus:ttyr2
[ 27.891146] PM: Adding info for No Bus:ttyr3
[ 27.891278] PM: Adding info for No Bus:ttyr4
[ 27.891405] PM: Adding info for No Bus:ttyr5
[ 27.891538] PM: Adding info for No Bus:ttyr6
[ 27.891697] PM: Adding info for No Bus:ttyr7
[ 27.891832] PM: Adding info for No Bus:ttyr8
[ 27.891962] PM: Adding info for No Bus:ttyr9
[ 27.892103] PM: Adding info for No Bus:ttyra
[ 27.892247] PM: Adding info for No Bus:ttyrb
[ 27.892389] PM: Adding info for No Bus:ttyrc
[ 27.892542] PM: Adding info for No Bus:ttyrd
[ 27.892690] PM: Adding info for No Bus:ttyre
[ 27.892830] PM: Adding info for No Bus:ttyrf
[ 27.892975] PM: Adding info for No Bus:ttys0
[ 27.893120] PM: Adding info for No Bus:ttys1
[ 27.893263] PM: Adding info for No Bus:ttys2
[ 27.893413] PM: Adding info for No Bus:ttys3
[ 27.893577] PM: Adding info for No Bus:ttys4
[ 27.893720] PM: Adding info for No Bus:ttys5
[ 27.894026] PM: Adding info for No Bus:ttys6
[ 27.894221] PM: Adding info for No Bus:ttys7
[ 27.894372] PM: Adding info for No Bus:ttys8
[ 27.894517] PM: Adding info for No Bus:ttys9
[ 27.894670] PM: Adding info for No Bus:ttysa
[ 27.894826] PM: Adding info for No Bus:ttysb
[ 27.894967] PM: Adding info for No Bus:ttysc
[ 27.895108] PM: Adding info for No Bus:ttysd
[ 27.895251] PM: Adding info for No Bus:ttyse
[ 27.895407] PM: Adding info for No Bus:ttysf
[ 27.895555] PM: Adding info for No Bus:ttyt0
[ 27.895721] PM: Adding info for No Bus:ttyt1
[ 27.895871] PM: Adding info for No Bus:ttyt2
[ 27.896035] PM: Adding info for No Bus:ttyt3
[ 27.896183] PM: Adding info for No Bus:ttyt4
[ 27.896327] PM: Adding info for No Bus:ttyt5
[ 27.896479] PM: Adding info for No Bus:ttyt6
[ 27.896646] PM: Adding info for No Bus:ttyt7
[ 27.896811] PM: Adding info for No Bus:ttyt8
[ 27.896972] PM: Adding info for No Bus:ttyt9
[ 27.897127] PM: Adding info for No Bus:ttyta
[ 27.897291] PM: Adding info for No Bus:ttytb
[ 27.897448] PM: Adding info for No Bus:ttytc
[ 27.897607] PM: Adding info for No Bus:ttytd
[ 27.897841] PM: Adding info for No Bus:ttyte
[ 27.898107] PM: Adding info for No Bus:ttytf
[ 27.898285] PM: Adding info for No Bus:ttyu0
[ 27.898445] PM: Adding info for No Bus:ttyu1
[ 27.898599] PM: Adding info for No Bus:ttyu2
[ 27.898766] PM: Adding info for No Bus:ttyu3
[ 27.898938] PM: Adding info for No Bus:ttyu4
[ 27.899104] PM: Adding info for No Bus:ttyu5
[ 27.899263] PM: Adding info for No Bus:ttyu6
[ 27.899429] PM: Adding info for No Bus:ttyu7
[ 27.899586] PM: Adding info for No Bus:ttyu8
[ 27.899744] PM: Adding info for No Bus:ttyu9
[ 27.899902] PM: Adding info for No Bus:ttyua
[ 27.900087] PM: Adding info for No Bus:ttyub
[ 27.900248] PM: Adding info for No Bus:ttyuc
[ 27.900408] PM: Adding info for No Bus:ttyud
[ 27.900569] PM: Adding info for No Bus:ttyue
[ 27.900742] PM: Adding info for No Bus:ttyuf
[ 27.900911] PM: Adding info for No Bus:ttyv0
[ 27.901090] PM: Adding info for No Bus:ttyv1
[ 27.901274] PM: Adding info for No Bus:ttyv2
[ 27.901459] PM: Adding info for No Bus:ttyv3
[ 27.901632] PM: Adding info for No Bus:ttyv4
[ 27.901879] PM: Adding info for No Bus:ttyv5
[ 27.902167] PM: Adding info for No Bus:ttyv6
[ 27.902354] PM: Adding info for No Bus:ttyv7
[ 27.902545] PM: Adding info for No Bus:ttyv8
[ 27.902717] PM: Adding info for No Bus:ttyv9
[ 27.902887] PM: Adding info for No Bus:ttyva
[ 27.903070] PM: Adding info for No Bus:ttyvb
[ 27.903242] PM: Adding info for No Bus:ttyvc
[ 27.903411] PM: Adding info for No Bus:ttyvd
[ 27.903599] PM: Adding info for No Bus:ttyve
[ 27.903784] PM: Adding info for No Bus:ttyvf
[ 27.903954] PM: Adding info for No Bus:ttyw0
[ 27.904127] PM: Adding info for No Bus:ttyw1
[ 27.904304] PM: Adding info for No Bus:ttyw2
[ 27.904488] PM: Adding info for No Bus:ttyw3
[ 27.904668] PM: Adding info for No Bus:ttyw4
[ 27.904861] PM: Adding info for No Bus:ttyw5
[ 27.905047] PM: Adding info for No Bus:ttyw6
[ 27.905235] PM: Adding info for No Bus:ttyw7
[ 27.905430] PM: Adding info for No Bus:ttyw8
[ 27.905616] PM: Adding info for No Bus:ttyw9
[ 27.905869] PM: Adding info for No Bus:ttywa
[ 27.906218] PM: Adding info for No Bus:ttywb
[ 27.906430] PM: Adding info for No Bus:ttywc
[ 27.906619] PM: Adding info for No Bus:ttywd
[ 27.906808] PM: Adding info for No Bus:ttywe
[ 27.907002] PM: Adding info for No Bus:ttywf
[ 27.907193] PM: Adding info for No Bus:ttyx0
[ 27.907380] PM: Adding info for No Bus:ttyx1
[ 27.907594] PM: Adding info for No Bus:ttyx2
[ 27.907798] PM: Adding info for No Bus:ttyx3
[ 27.907991] PM: Adding info for No Bus:ttyx4
[ 27.908178] PM: Adding info for No Bus:ttyx5
[ 27.908368] PM: Adding info for No Bus:ttyx6
[ 27.908569] PM: Adding info for No Bus:ttyx7
[ 27.908771] PM: Adding info for No Bus:ttyx8
[ 27.908970] PM: Adding info for No Bus:ttyx9
[ 27.909162] PM: Adding info for No Bus:ttyxa
[ 27.909370] PM: Adding info for No Bus:ttyxb
[ 27.909577] PM: Adding info for No Bus:ttyxc
[ 27.909843] PM: Adding info for No Bus:ttyxd
[ 27.910163] PM: Adding info for No Bus:ttyxe
[ 27.910421] PM: Adding info for No Bus:ttyxf
[ 27.910627] PM: Adding info for No Bus:ttyy0
[ 27.910827] PM: Adding info for No Bus:ttyy1
[ 27.911026] PM: Adding info for No Bus:ttyy2
[ 27.911244] PM: Adding info for No Bus:ttyy3
[ 27.911446] PM: Adding info for No Bus:ttyy4
[ 27.911659] PM: Adding info for No Bus:ttyy5
[ 27.911869] PM: Adding info for No Bus:ttyy6
[ 27.912070] PM: Adding info for No Bus:ttyy7
[ 27.912272] PM: Adding info for No Bus:ttyy8
[ 27.912476] PM: Adding info for No Bus:ttyy9
[ 27.912684] PM: Adding info for No Bus:ttyya
[ 27.912897] PM: Adding info for No Bus:ttyyb
[ 27.913117] PM: Adding info for No Bus:ttyyc
[ 27.913326] PM: Adding info for No Bus:ttyyd
[ 27.913543] PM: Adding info for No Bus:ttyye
[ 27.913832] PM: Adding info for No Bus:ttyyf
[ 27.914169] PM: Adding info for No Bus:ttyz0
[ 27.914397] PM: Adding info for No Bus:ttyz1
[ 27.914622] PM: Adding info for No Bus:ttyz2
[ 27.914844] PM: Adding info for No Bus:ttyz3
[ 27.915060] PM: Adding info for No Bus:ttyz4
[ 27.915273] PM: Adding info for No Bus:ttyz5
[ 27.915486] PM: Adding info for No Bus:ttyz6
[ 27.915702] PM: Adding info for No Bus:ttyz7
[ 27.915920] PM: Adding info for No Bus:ttyz8
[ 27.916151] PM: Adding info for No Bus:ttyz9
[ 27.916367] PM: Adding info for No Bus:ttyza
[ 27.916602] PM: Adding info for No Bus:ttyzb
[ 27.916823] PM: Adding info for No Bus:ttyzc
[ 27.917042] PM: Adding info for No Bus:ttyzd
[ 27.917267] PM: Adding info for No Bus:ttyze
[ 27.917492] PM: Adding info for No Bus:ttyzf
[ 27.917718] PM: Adding info for No Bus:ttya0
[ 27.918154] PM: Adding info for No Bus:ttya1
[ 27.918402] PM: Adding info for No Bus:ttya2
[ 27.918637] PM: Adding info for No Bus:ttya3
[ 27.918862] PM: Adding info for No Bus:ttya4
[ 27.919085] PM: Adding info for No Bus:ttya5
[ 27.919328] PM: Adding info for No Bus:ttya6
[ 27.919564] PM: Adding info for No Bus:ttya7
[ 27.919788] PM: Adding info for No Bus:ttya8
[ 27.920012] PM: Adding info for No Bus:ttya9
[ 27.920251] PM: Adding info for No Bus:ttyaa
[ 27.920492] PM: Adding info for No Bus:ttyab
[ 27.920741] PM: Adding info for No Bus:ttyac
[ 27.920986] PM: Adding info for No Bus:ttyad
[ 27.921215] PM: Adding info for No Bus:ttyae
[ 27.921454] PM: Adding info for No Bus:ttyaf
[ 27.921690] PM: Adding info for No Bus:ttyb0
[ 27.922106] PM: Adding info for No Bus:ttyb1
[ 27.922372] PM: Adding info for No Bus:ttyb2
[ 27.922639] PM: Adding info for No Bus:ttyb3
[ 27.922875] PM: Adding info for No Bus:ttyb4
[ 27.923116] PM: Adding info for No Bus:ttyb5
[ 27.923352] PM: Adding info for No Bus:ttyb6
[ 27.923585] PM: Adding info for No Bus:ttyb7
[ 27.923822] PM: Adding info for No Bus:ttyb8
[ 27.924074] PM: Adding info for No Bus:ttyb9
[ 27.924323] PM: Adding info for No Bus:ttyba
[ 27.924574] PM: Adding info for No Bus:ttybb
[ 27.924816] PM: Adding info for No Bus:ttybc
[ 27.925055] PM: Adding info for No Bus:ttybd
[ 27.925302] PM: Adding info for No Bus:ttybe
[ 27.925554] PM: Adding info for No Bus:ttybf
[ 27.925995] PM: Adding info for No Bus:ttyc0
[ 27.926304] PM: Adding info for No Bus:ttyc1
[ 27.926552] PM: Adding info for No Bus:ttyc2
[ 27.926825] PM: Adding info for No Bus:ttyc3
[ 27.927079] PM: Adding info for No Bus:ttyc4
[ 27.927326] PM: Adding info for No Bus:ttyc5
[ 27.927590] PM: Adding info for No Bus:ttyc6
[ 27.927847] PM: Adding info for No Bus:ttyc7
[ 27.928094] PM: Adding info for No Bus:ttyc8
[ 27.928344] PM: Adding info for No Bus:ttyc9
[ 27.928598] PM: Adding info for No Bus:ttyca
[ 27.928874] PM: Adding info for No Bus:ttycb
[ 27.929126] PM: Adding info for No Bus:ttycc
[ 27.929398] PM: Adding info for No Bus:ttycd
[ 27.929658] PM: Adding info for No Bus:ttyce
[ 27.930093] PM: Adding info for No Bus:ttycf
[ 27.930379] PM: Adding info for No Bus:ttyd0
[ 27.930632] PM: Adding info for No Bus:ttyd1
[ 27.930894] PM: Adding info for No Bus:ttyd2
[ 27.931177] PM: Adding info for No Bus:ttyd3
[ 27.931444] PM: Adding info for No Bus:ttyd4
[ 27.931698] PM: Adding info for No Bus:ttyd5
[ 27.931954] PM: Adding info for No Bus:ttyd6
[ 27.932226] PM: Adding info for No Bus:ttyd7
[ 27.932487] PM: Adding info for No Bus:ttyd8
[ 27.932742] PM: Adding info for No Bus:ttyd9
[ 27.933023] PM: Adding info for No Bus:ttyda
[ 27.933293] PM: Adding info for No Bus:ttydb
[ 27.933558] PM: Adding info for No Bus:ttydc
[ 27.933994] PM: Adding info for No Bus:ttydd
[ 27.934315] PM: Adding info for No Bus:ttyde
[ 27.934587] PM: Adding info for No Bus:ttydf
[ 27.934865] PM: Adding info for No Bus:ttye0
[ 27.935136] PM: Adding info for No Bus:ttye1
[ 27.935405] PM: Adding info for No Bus:ttye2
[ 27.935692] PM: Adding info for No Bus:ttye3
[ 27.935966] PM: Adding info for No Bus:ttye4
[ 27.936239] PM: Adding info for No Bus:ttye5
[ 27.936508] PM: Adding info for No Bus:ttye6
[ 27.936805] PM: Adding info for No Bus:ttye7
[ 27.937086] PM: Adding info for No Bus:ttye8
[ 27.937363] PM: Adding info for No Bus:ttye9
[ 27.937640] PM: Adding info for No Bus:ttyea
[ 27.938135] PM: Adding info for No Bus:ttyeb
[ 27.938451] PM: Adding info for No Bus:ttyec
[ 27.938743] PM: Adding info for No Bus:ttyed
[ 27.939034] PM: Adding info for No Bus:ttyee
[ 27.939321] PM: Adding info for No Bus:ttyef
[ 27.939418] PM: Adding info for No Bus:hpet
[ 27.939478] PM: Removing info for No Bus:hpet
[ 27.939528] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 27.939555] PM: Adding info for platform:serial8250
[ 27.939679] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.939962] PM: Adding info for No Bus:ttyS0
[ 27.940110] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.940355] PM: Adding info for No Bus:ttyS1
[ 27.940675] PM: Adding info for No Bus:ttyS2
[ 27.941014] PM: Adding info for No Bus:ttyS3
[ 27.941556] PM: Removing info for No Bus:ttyS0
[ 27.941694] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.942091] PM: Adding info for No Bus:ttyS0
[ 27.942368] PM: Removing info for No Bus:ttyS1
[ 27.942500] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.942777] PM: Adding info for No Bus:ttyS1
[ 27.942987] PM: Adding info for No Bus:isa
[ 27.943750] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 27.944014] input: Macintosh mouse button emulation as /class/input/input0
[ 27.944031] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 27.944037] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 27.944405] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 27.944516] PM: Adding info for platform:i8042
[ 27.947105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.947114] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.947162] PM: Adding info for serio:serio0
[ 27.947255] PM: Adding info for serio:serio1
[ 27.947361] PM: Adding info for No Bus:psaux
[ 27.947395] mice: PS/2 mouse device common for all mice
[ 27.947527] PM: Adding info for platform:eisa.0
[ 27.947573] EISA: Probing bus 0 at eisa.0
[ 27.947598] Cannot allocate resource for EISA slot 4
[ 27.947601] Cannot allocate resource for EISA slot 5
[ 27.947615] EISA: Detected 0 cards.
[ 27.947763] TCP cubic registered
[ 27.947779] NET: Registered protocol family 1
[ 27.947823] Using IPI Shortcut mode
[ 27.947860] Magic number: 15:234:399
[ 27.948904] Freeing unused kernel memory: 320k freed
[ 27.948992] PM: Adding info for No Bus:vcs1
[ 27.949114] PM: Adding info for No Bus:vcsa1
[ 27.949877] Time: tsc clocksource has been installed.
[ 27.974094] input: AT Translated Set 2 keyboard as /class/input/input1
[ 28.142095] PM: Adding info for No Bus:vcs2
[ 28.142208] PM: Adding info for No Bus:vcsa2
[ 28.143019] PM: Removing info for No Bus:vcs2
[ 28.143131] PM: Removing info for No Bus:vcsa2
[ 28.146357] PM: Adding info for No Bus:vcs2
[ 28.146483] PM: Adding info for No Bus:vcsa2
[ 28.151373] PM: Removing info for No Bus:vcs2
[ 28.151517] PM: Removing info for No Bus:vcsa2
[ 28.153861] PM: Adding info for No Bus:vcs2
[ 28.153962] PM: Adding info for No Bus:vcsa2
[ 28.155728] PM: Removing info for No Bus:vcs2
[ 28.155839] PM: Removing info for No Bus:vcsa2
[ 28.157332] PM: Adding info for No Bus:vcs3
[ 28.157493] PM: Adding info for No Bus:vcsa3
[ 28.158387] PM: Removing info for No Bus:vcs3
[ 28.158504] PM: Removing info for No Bus:vcsa3
[ 28.161751] PM: Adding info for No Bus:vcs3
[ 28.161873] PM: Adding info for No Bus:vcsa3
[ 28.166897] PM: Removing info for No Bus:vcs3
[ 28.167040] PM: Removing info for No Bus:vcsa3
[ 28.169403] PM: Adding info for No Bus:vcs3
[ 28.169508] PM: Adding info for No Bus:vcsa3
[ 28.171338] PM: Removing info for No Bus:vcs3
[ 28.171453] PM: Removing info for No Bus:vcsa3
[ 28.172960] PM: Adding info for No Bus:vcs4
[ 28.173064] PM: Adding info for No Bus:vcsa4
[ 28.173939] PM: Removing info for No Bus:vcs4
[ 28.174051] PM: Removing info for No Bus:vcsa4
[ 28.177247] PM: Adding info for No Bus:vcs4
[ 28.177384] PM: Adding info for No Bus:vcsa4
[ 28.182370] PM: Removing info for No Bus:vcs4
[ 28.182509] PM: Removing info for No Bus:vcsa4
[ 28.184804] PM: Adding info for No Bus:vcs4
[ 28.184913] PM: Adding info for No Bus:vcsa4
[ 28.186747] PM: Removing info for No Bus:vcs4
[ 28.186864] PM: Removing info for No Bus:vcsa4
[ 28.188405] PM: Adding info for No Bus:vcs5
[ 28.188511] PM: Adding info for No Bus:vcsa5
[ 28.189325] PM: Removing info for No Bus:vcs5
[ 28.189487] PM: Removing info for No Bus:vcsa5
[ 28.192760] PM: Adding info for No Bus:vcs5
[ 28.192889] PM: Adding info for No Bus:vcsa5
[ 28.198000] PM: Removing info for No Bus:vcs5
[ 28.198138] PM: Removing info for No Bus:vcsa5
[ 28.200422] PM: Adding info for No Bus:vcs5
[ 28.200527] PM: Adding info for No Bus:vcsa5
[ 28.202354] PM: Removing info for No Bus:vcs5
[ 28.202472] PM: Removing info for No Bus:vcsa5
[ 28.203975] PM: Adding info for No Bus:vcs6
[ 28.204082] PM: Adding info for No Bus:vcsa6
[ 28.204901] PM: Removing info for No Bus:vcs6
[ 28.205012] PM: Removing info for No Bus:vcsa6
[ 28.208215] PM: Adding info for No Bus:vcs6
[ 28.208348] PM: Adding info for No Bus:vcsa6
[ 28.213341] PM: Removing info for No Bus:vcs6
[ 28.213564] PM: Removing info for No Bus:vcsa6
[ 28.215832] PM: Adding info for No Bus:vcs6
[ 28.215931] PM: Adding info for No Bus:vcsa6
[ 28.217844] PM: Removing info for No Bus:vcs6
[ 28.217955] PM: Removing info for No Bus:vcsa6
[ 28.324125] PM: Adding info for No Bus:vcs8
[ 28.324257] PM: Adding info for No Bus:vcsa8
[ 29.521146] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 30.508970] SCSI subsystem initialized
[ 30.519854] libata version 2.00 loaded.
[ 30.522951] ata_piix 0000:00:1f.1: version 2.00ac7
[ 30.522995] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 30.523140] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[ 30.523202] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[ 30.523232] scsi0 : ata_piix
[ 30.523249] PM: Adding info for No Bus:host0
[ 30.550217] usbcore: registered new interface driver usbfs
[ 30.550257] usbcore: registered new interface driver hub
[ 30.550298] usbcore: registered new device driver usb
[ 30.552764] USB Universal Host Controller Interface driver v3.0
[ 30.640707] Linux Tulip driver version 1.1.14 (May 11, 2002)
[ 30.841828] ata1.00: ATAPI, max UDMA/33
[ 30.863680] Floppy drive(s): fd0 is 1.44M
[ 30.940952] FDC 0 is a post-1991 82077
[ 30.958682] PM: Adding info for platform:floppy.0
[ 31.005533] ata1.00: configured for UDMA/33
[ 31.005560] scsi1 : ata_piix
[ 31.005593] PM: Adding info for No Bus:host1
[ 31.172448] ATA: abnormal status 0x7F on port 0x177
[ 31.333039] ata2.01: ATAPI, max MWDMA2
[ 31.496799] ata2.01: configured for MWDMA2
[ 31.496863] PM: Adding info for No Bus:target0:0:0
[ 31.499200] scsi 0:0:0:0: CD-ROM HP DVD Writer 200j 1.36 PQ: 0 ANSI: 5
[ 31.499214] PM: Adding info for scsi:0:0:0:0
[ 31.499783] PM: Adding info for No Bus:target1:0:1
[ 31.500477] scsi 1:0:1:0: CD-ROM E-IDE CD-ROM 56X/AKH A80 PQ: 0 ANSI: 5
[ 31.500492] PM: Adding info for scsi:1:0:1:0
[ 31.510680] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 31.510689] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 31.510944] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 31.510985] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000
[ 31.511089] PM: Adding info for usb:usb1
[ 31.511175] PM: Adding info for No Bus:usbdev1.1_ep00
[ 31.511199] usb usb1: configuration #1 chosen from 1 choice
[ 31.511215] PM: Adding info for usb:1-0:1.0
[ 31.511244] hub 1-0:1.0: USB hub found
[ 31.511262] hub 1-0:1.0: 2 ports detected
[ 31.552229] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 31.552239] Uniform CD-ROM driver Revision: 3.20
[ 31.552635] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 31.561599] sr1: scsi3-mmc drive: 231x/52x cd/rw xa/form2 cdda tray
[ 31.561965] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 31.571463] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 31.571685] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 31.612494] PM: Adding info for No Bus:usbdev1.1_ep81
[ 31.612669] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 31.612675] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 31.612717] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 31.612755] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d800
[ 31.612829] PM: Adding info for usb:usb2
[ 31.612886] PM: Adding info for No Bus:usbdev2.1_ep00
[ 31.612912] usb usb2: configuration #1 chosen from 1 choice
[ 31.612927] PM: Adding info for usb:2-0:1.0
[ 31.612963] hub 2-0:1.0: USB hub found
[ 31.612975] hub 2-0:1.0: 2 ports detected
[ 31.716329] PM: Adding info for No Bus:usbdev2.1_ep81
[ 31.716631] PDC20269: IDE controller at PCI slot 0000:02:01.0
[ 31.716668] PDC20269: chipset revision 2
[ 31.716673] PDC20269: ROM enabled at 0x30020000
[ 31.726626] PDC20269: PLL input clock is 16565 kHz
[ 31.756376] PDC20269: 100% native mode on irq 21
[ 31.756387] ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
[ 31.757010] ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
[ 31.757027] Probing IDE interface ide2...
[ 32.044020] hde: SAMSUNG SP1203N, ATA DISK drive
[ 32.044077] PM: Adding info for No Bus:ide2
[ 32.388718] PM: Removing info for No Bus:vcs8
[ 32.388777] PM: Removing info for No Bus:vcsa8
[ 32.555258] hdf: Maxtor 6Y160P0, ATA DISK drive
[ 32.611416] ide2 at 0xa000-0xa007,0xa402 on irq 21
[ 32.611464] PM: Adding info for ide:2.0
[ 32.611842] PM: Adding info for ide:2.1
[ 32.612050] Probing IDE interface ide3...
[ 33.179031] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
[ 33.186241] eth0: ADMtek Comet rev 17 at Port 0xb400, 00:04:5A:8A:55:7B, IRQ 21.
[ 33.197996] hde: max request size: 512KiB
[ 33.207974] hde: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 33.208614] hde: cache flushes supported
[ 33.208697] hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 >
[ 33.248309] hdf: max request size: 512KiB
[ 33.248888] hdf: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
[ 33.249048] hdf: cache flushes supported
[ 33.249097] hdf: hdf1 hdf2 hdf3 < hdf5 hdf6 >
[ 33.856216] Attempting manual resume
[ 33.856223] swsusp: Resume From Partition 33:6
[ 33.856226] PM: Checking swsusp image.
[ 33.856465] PM: Resume from disk failed.
[ 33.908042] kjournald starting. Commit interval 5 seconds
[ 33.908067] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.283024] PM: Removing info for No Bus:vcs1
[ 34.283072] PM: Removing info for No Bus:vcsa1
[ 34.283151] PM: Adding info for No Bus:vcs1
[ 34.283170] PM: Adding info for No Bus:vcsa1
[ 38.911927] PM: Adding info for No Bus:vcs2
[ 38.911970] PM: Adding info for No Bus:vcsa2
[ 38.913910] PM: Removing info for No Bus:vcs2
[ 38.913957] PM: Removing info for No Bus:vcsa2
[ 38.914202] PM: Adding info for No Bus:vcs3
[ 38.914226] PM: Adding info for No Bus:vcsa3
[ 38.916103] PM: Removing info for No Bus:vcs3
[ 38.916150] PM: Removing info for No Bus:vcsa3
[ 38.916399] PM: Adding info for No Bus:vcs4
[ 38.916422] PM: Adding info for No Bus:vcsa4
[ 38.918341] PM: Removing info for No Bus:vcs4
[ 38.918388] PM: Removing info for No Bus:vcsa4
[ 38.918630] PM: Adding info for No Bus:vcs5
[ 38.918651] PM: Adding info for No Bus:vcsa5
[ 38.920529] PM: Removing info for No Bus:vcs5
[ 38.920577] PM: Removing info for No Bus:vcsa5
[ 38.920825] PM: Adding info for No Bus:vcs6
[ 38.920847] PM: Adding info for No Bus:vcsa6
[ 38.922782] PM: Removing info for No Bus:vcs6
[ 38.922832] PM: Removing info for No Bus:vcsa6
[ 41.690206] NET: Registered protocol family 10
[ 41.690392] lo: Disabled Privacy Extensions
[ 42.793564] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.857861] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.308782] 0000:02:05.0: tulip_stop_rxtx() failed
[ 43.308797] eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
[ 43.758608] input: PC Speaker as /class/input/input2
[ 43.775702] PM: Adding info for No Bus:rtc
[ 43.775761] Real Time Clock Driver v1.12ac
[ 43.867350] Linux agpgart interface v0.101 (c) Dave Jones
[ 43.888646] agpgart: Detected an Intel i845 Chipset.
[ 43.892561] PM: Adding info for No Bus:agpgart
[ 43.892660] agpgart: AGP aperture is 64M @ 0xe8000000
[ 43.906434] iTCO_vendor_support: vendor-support=0
[ 43.925774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 43.925840] PM: Adding info for platform:iTCO_wdt
[ 43.925904] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 43.925964] iTCO_wdt: No card detected
[ 44.100776] PM: Adding info for No Bus:timer
[ 44.970774] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 45.142803] PM: Adding info for No Bus:seq
[ 45.279073] PM: Adding info for No Bus:midiC1D0
[ 45.279129] PM: Adding info for No Bus:midi1
[ 45.279172] PM: Adding info for No Bus:dmmidi1
[ 45.279220] PM: Adding info for No Bus:controlC1
[ 45.364773] parport: PnPBIOS parport detected.
[ 45.364842] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 45.425667] PM: Adding info for No Bus:sequencer
[ 45.425727] PM: Adding info for No Bus:sequencer2
[ 45.555865] PM: Adding info for No Bus:mixer1
[ 45.926138] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 46.238517] intel8x0_measure_ac97_clock: measured 54900 usecs
[ 46.238523] intel8x0: clocking to 48000
[ 46.238580] PM: Adding info for No Bus:pcmC0D1c
[ 46.238745] PM: Adding info for No Bus:adsp
[ 46.238795] PM: Adding info for No Bus:pcmC0D0p
[ 46.238841] PM: Adding info for No Bus:pcmC0D0c
[ 46.238888] PM: Adding info for No Bus:dsp
[ 46.238932] PM: Adding info for No Bus:audio
[ 46.238980] PM: Adding info for ac97:0-0:ALC200,200P
[ 46.239099] PM: Adding info for No Bus:controlC0
[ 46.239164] PM: Adding info for No Bus:mixer
[ 52.053820] eth0: no IPv6 routers present
[ 61.559632] ata2.01: qc timeout (cmd 0xa0)
[ 61.559654] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 61.559710] ata2.01: (BMDMA stat 0x45)
[ 61.559758] ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 61.559761] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 68.549185] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 91.530775] ata2: port failed to respond (30 secs, Status 0xd8)
[ 91.530843] ata2: soft resetting port
[ 91.697897] ATA: abnormal status 0x7F on port 0x177
[ 91.858328] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 91.858335] ata2.01: revalidation failed (errno=-5)
[ 91.858400] ata2: failed to recover some devices, retrying in 5 secs
[ 96.854849] ata2: soft resetting port
[ 97.021957] ATA: abnormal status 0x7F on port 0x177
[ 97.346290] ata2.01: configured for MWDMA2
[ 97.346336] ata2: EH complete
[ 127.321273] ata2.01: qc timeout (cmd 0xa0)
[ 127.321295] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 127.321361] ata2.01: (BMDMA stat 0x45)
[ 127.321416] ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 127.321419] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 134.310818] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 157.292413] ata2: port failed to respond (30 secs, Status 0xd8)
[ 157.292485] ata2: soft resetting port
[ 157.459536] ATA: abnormal status 0x7F on port 0x177
[ 157.619967] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 157.619976] ata2.01: revalidation failed (errno=-5)
[ 157.620042] ata2: failed to recover some devices, retrying in 5 secs
[ 162.616486] ata2: soft resetting port
[ 162.783578] ATA: abnormal status 0x7F on port 0x177
[ 163.107943] ata2.01: configured for MWDMA2
[ 163.107994] ata2: EH complete
[ 193.070927] ata2.01: qc timeout (cmd 0xa0)
[ 193.070949] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 193.071014] ata2.01: (BMDMA stat 0x45)
[ 193.071070] ata2.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 193.071072] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 200.060476] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 220.160401] fuse init (API version 7.8)
[ 220.160498] PM: Adding info for No Bus:fuse
[ 220.201566] lp0: using parport0 (interrupt-driven).
[ 220.270196] PM: Adding info for No Bus:i2c-0
[ 220.322173] PM: Adding info for i2c:0-0050
[ 220.338152] PM: Adding info for i2c:0-0051
[ 220.411715] PM: Adding info for No Bus:i2c-9191
[ 220.458828] it87: Found IT8712F chip at 0x290, revision 4
[ 220.461321] PM: Adding info for i2c:9191-0290
[ 220.463797] it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
[ 220.683723] Adding 1044184k swap on /dev/disk/by-uuid/5c6a2d8c-54c1-44cb-8f1b-4a159373a120. Priority:-1 extents:1 across:1044184k
[ 220.997416] EXT3 FS on hde7, internal journal
[ 223.042077] ata2: port failed to respond (30 secs, Status 0xd8)
[ 223.042149] ata2: soft resetting port
[ 223.209223] ATA: abnormal status 0x7F on port 0x177
[ 223.369700] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 223.369710] ata2.01: revalidation failed (errno=-5)
[ 223.369784] ata2: failed to recover some devices, retrying in 5 secs
[ 224.555235] kjournald starting. Commit interval 5 seconds
[ 224.555360] EXT3 FS on hde1, internal journal
[ 224.555367] EXT3-fs: mounted filesystem with ordered data mode.
[ 224.581094] kjournald starting. Commit interval 5 seconds
[ 224.581248] EXT3 FS on hde3, internal journal
[ 224.581256] EXT3-fs: mounted filesystem with ordered data mode.
[ 224.630208] kjournald starting. Commit interval 5 seconds
[ 224.630415] EXT3 FS on hdf5, internal journal
[ 224.630423] EXT3-fs: mounted filesystem with ordered data mode.
[ 224.710512] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 224.779116] NTFS volume version 3.1.
[ 224.904552] kjournald starting. Commit interval 5 seconds
[ 224.904792] EXT3 FS on hdf6, internal journal
[ 224.904801] EXT3-fs: mounted filesystem with ordered data mode.
[ 224.921254] kjournald starting. Commit interval 5 seconds
[ 224.921396] EXT3 FS on hde5, internal journal
[ 224.921405] EXT3-fs: mounted filesystem with ordered data mode.
[ 224.951048] kjournald starting. Commit interval 5 seconds
[ 224.951174] EXT3 FS on hde2, internal journal
[ 224.951182] EXT3-fs: mounted filesystem with ordered data mode.
[ 226.942631] NET: Registered protocol family 17
[ 228.366147] ata2: soft resetting port
[ 228.533250] ATA: abnormal status 0x7F on port 0x177
[ 228.857581] ata2.01: configured for MWDMA2
[ 228.857623] ata2: EH complete
[ 231.087788] PM: Adding info for No Bus:vcs2
[ 231.090822] PM: Adding info for No Bus:vcsa2
[ 231.095414] PM: Removing info for No Bus:vcs2
[ 231.098071] PM: Removing info for No Bus:vcsa2
[ 231.102746] PM: Adding info for No Bus:vcs2
[ 231.105757] PM: Adding info for No Bus:vcsa2
[ 231.114804] PM: Removing info for No Bus:vcs2
[ 231.117455] PM: Removing info for No Bus:vcsa2
[ 231.120508] PM: Adding info for No Bus:vcs3
[ 231.123535] PM: Adding info for No Bus:vcsa3
[ 231.128090] PM: Removing info for No Bus:vcs3
[ 231.130788] PM: Removing info for No Bus:vcsa3
[ 231.135506] PM: Adding info for No Bus:vcs3
[ 231.138561] PM: Adding info for No Bus:vcsa3
[ 231.147594] PM: Removing info for No Bus:vcs3
[ 231.150291] PM: Removing info for No Bus:vcsa3
[ 231.153298] PM: Adding info for No Bus:vcs4
[ 231.156321] PM: Adding info for No Bus:vcsa4
[ 231.160904] PM: Removing info for No Bus:vcs4
[ 231.163584] PM: Removing info for No Bus:vcsa4
[ 231.168258] PM: Adding info for No Bus:vcs4
[ 231.171320] PM: Adding info for No Bus:vcsa4
[ 231.180320] PM: Removing info for No Bus:vcs4
[ 231.182985] PM: Removing info for No Bus:vcsa4
[ 231.186026] PM: Adding info for No Bus:vcs5
[ 231.189011] PM: Adding info for No Bus:vcsa5
[ 231.193560] PM: Removing info for No Bus:vcs5
[ 231.196245] PM: Removing info for No Bus:vcsa5
[ 231.200924] PM: Adding info for No Bus:vcs5
[ 231.203993] PM: Adding info for No Bus:vcsa5
[ 231.213029] PM: Removing info for No Bus:vcs5
[ 231.215713] PM: Removing info for No Bus:vcsa5
[ 231.218728] PM: Adding info for No Bus:vcs6
[ 231.221712] PM: Adding info for No Bus:vcsa6
[ 231.226321] PM: Removing info for No Bus:vcs6
[ 231.228953] PM: Removing info for No Bus:vcsa6
[ 231.233664] PM: Adding info for No Bus:vcs6
[ 231.236721] PM: Adding info for No Bus:vcsa6
[ 231.245706] PM: Removing info for No Bus:vcs6
[ 231.248394] PM: Removing info for No Bus:vcsa6
[ 231.258666] PM: Adding info for No Bus:vcs2
[ 231.261654] PM: Adding info for No Bus:vcsa2
[ 231.266622] PM: Removing info for No Bus:vcs2
[ 231.269246] PM: Removing info for No Bus:vcsa2
[ 231.272104] PM: Adding info for No Bus:vcs3
[ 231.275110] PM: Adding info for No Bus:vcsa3
[ 231.280039] PM: Removing info for No Bus:vcs3
[ 231.282690] PM: Removing info for No Bus:vcsa3
[ 231.285513] PM: Adding info for No Bus:vcs4
[ 231.288473] PM: Adding info for No Bus:vcsa4
[ 231.293395] PM: Removing info for No Bus:vcs4
[ 231.296029] PM: Removing info for No Bus:vcsa4
[ 231.298902] PM: Adding info for No Bus:vcs5
[ 231.301867] PM: Adding info for No Bus:vcsa5
[ 231.306791] PM: Removing info for No Bus:vcs5
[ 231.309415] PM: Removing info for No Bus:vcsa5
[ 231.312261] PM: Adding info for No Bus:vcs6
[ 231.315257] PM: Adding info for No Bus:vcsa6
[ 231.320162] PM: Removing info for No Bus:vcs6
[ 231.322840] PM: Removing info for No Bus:vcsa6
[ 232.038765] PM: Adding info for No Bus:vcs2
[ 232.041774] PM: Adding info for No Bus:vcsa2
[ 232.044873] PM: Removing info for No Bus:vcs2
[ 232.047473] PM: Removing info for No Bus:vcsa2
[ 232.050232] PM: Adding info for No Bus:vcs3
[ 232.053213] PM: Adding info for No Bus:vcsa3
[ 232.056280] PM: Removing info for No Bus:vcs3
[ 232.058907] PM: Removing info for No Bus:vcsa3
[ 232.061649] PM: Adding info for No Bus:vcs4
[ 232.064640] PM: Adding info for No Bus:vcsa4
[ 232.067717] PM: Removing info for No Bus:vcs4
[ 232.070321] PM: Removing info for No Bus:vcsa4
[ 232.073078] PM: Adding info for No Bus:vcs5
[ 232.076041] PM: Adding info for No Bus:vcsa5
[ 232.079128] PM: Removing info for No Bus:vcs5
[ 232.081752] PM: Removing info for No Bus:vcsa5
[ 232.084465] PM: Adding info for No Bus:vcs6
[ 232.087437] PM: Adding info for No Bus:vcsa6
[ 232.090542] PM: Removing info for No Bus:vcs6
[ 232.093156] PM: Removing info for No Bus:vcsa6
[ 232.147683] PM: Adding info for No Bus:vcs2
[ 232.150739] PM: Adding info for No Bus:vcsa2
[ 232.155219] PM: Removing info for No Bus:vcs2
[ 232.157888] PM: Removing info for No Bus:vcsa2
[ 232.164439] PM: Adding info for No Bus:vcs3
[ 232.167460] PM: Adding info for No Bus:vcsa3
[ 232.171983] PM: Removing info for No Bus:vcs3
[ 232.174649] PM: Removing info for No Bus:vcsa3
[ 232.181234] PM: Adding info for No Bus:vcs4
[ 232.184265] PM: Adding info for No Bus:vcsa4
[ 232.188813] PM: Removing info for No Bus:vcs4
[ 232.191450] PM: Removing info for No Bus:vcsa4
[ 232.196475] PM: Adding info for No Bus:vcs5
[ 232.197006] PM: Adding info for No Bus:vcsa5
[ 232.198581] PM: Removing info for No Bus:vcs5
[ 232.198636] PM: Removing info for No Bus:vcsa5
[ 232.202637] PM: Adding info for No Bus:vcs6
[ 232.202676] PM: Adding info for No Bus:vcsa6
[ 232.204159] PM: Removing info for No Bus:vcs6
[ 232.204210] PM: Removing info for No Bus:vcsa6
[ 232.561348] PM: Adding info for No Bus:vcs4
[ 232.562162] PM: Adding info for No Bus:vcsa4
[ 232.566550] PM: Adding info for No Bus:vcs5
[ 232.567364] PM: Adding info for No Bus:vcsa5
[ 232.575960] PM: Adding info for No Bus:vcs2
[ 232.578934] PM: Adding info for No Bus:vcsa2
[ 232.583495] PM: Adding info for No Bus:vcs3
[ 232.586498] PM: Adding info for No Bus:vcsa3
[ 232.595450] PM: Adding info for No Bus:vcs6
[ 232.598517] PM: Adding info for No Bus:vcsa6
[ 237.912449] Capability LSM initialized
[ 238.306966] PM: Adding info for No Bus:parport0
[ 238.311900] ppdev: user-space parallel port driver
[ 241.031388] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 241.031987] PM: Adding info for No Bus:apm_bios
[ 244.353872] PM: Adding info for No Bus:vcs7
[ 244.358306] PM: Adding info for No Bus:vcsa7
[ 244.816248] [drm] Initialized drm 1.1.0 20060810
[ 244.887759] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 245.600002] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 245.600263] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 245.600512] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 245.898897] [drm] Setting GART location based on new memory map
[ 245.898969] [drm] writeback test succeeded in 1 usecs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-17 20:07 ` Bartlomiej Zolnierkiewicz
@ 2007-03-18 10:07 ` YUP
2007-03-18 15:10 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-18 10:07 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
[-- Attachment #1: Type: text/plain, Size: 319 bytes --]
Please ignore previous message, I sent wrong file. Here is right dmesg
output with disabled ata_piix.
Yarema
Bartlomiej Zolnierkiewicz пише:
> On Saturday 17 March 2007, YUP wrote:
>> Just to check up can you recheck my config?
>
> Looks fine but please set CONFIG_ATA_PIIX to "n" (just in case).
>
> Bart
>
[-- Attachment #2: dmesg_output_ide --]
[-- Type: text/plain, Size: 57910 bytes --]
[ 0.000000] Linux version 2.6.20.3 (root@zaraza) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #1 Sat Mar 17 21:33:41 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c80
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f6710
[ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6800
[ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:1 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1800.159 MHz processor.
[ 29.524405] Built 1 zonelists. Total pages: 130033
[ 29.524408] Kernel command line: root=UUID=bdcb0225-6620-4d74-9fe5-2f008da464c7 ro quiet splash
[ 29.524692] mapped APIC to ffffd000 (fee00000)
[ 29.524696] mapped IOAPIC to ffffc000 (fec00000)
[ 29.524703] Enabling fast FPU save and restore... done.
[ 29.524707] Enabling unmasked SIMD FPU exception support... done.
[ 29.524732] Initializing CPU#0
[ 29.524853] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 29.526536] Console: colour VGA+ 80x25
[ 29.527202] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 29.527884] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.550524] Memory: 475000k/524224k available (1894k kernel code, 48572k reserved, 850k data, 320k init, 0k highmem)
[ 29.550538] virtual kernel memory layout:
[ 29.550540] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
[ 29.550542] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 29.550543] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 29.550545] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 29.550547] .init : 0xc03b2000 - 0xc0402000 ( 320 kB)
[ 29.550548] .data : 0xc02d9b53 - 0xc03ae434 ( 850 kB)
[ 29.550550] .text : 0xc0100000 - 0xc02d9b53 (1894 kB)
[ 29.550554] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 29.628703] Calibrating delay using timer specific routine.. 3603.22 BogoMIPS (lpj=7206459)
[ 29.628753] Security Framework v1.0.0 initialized
[ 29.628765] SELinux: Disabled at boot.
[ 29.628782] Mount-cache hash table entries: 512
[ 29.628938] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 29.628954] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 29.628958] CPU: L2 cache: 256K
[ 29.628961] CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000
[ 29.628989] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
[ 29.629001] Checking 'hlt' instruction... OK.
[ 29.645391] ExtINT not setup in hardware but reported by MP table
[ 29.645477] ENABLING IO-APIC IRQs
[ 29.645714] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 29.792559] PM: Adding info for No Bus:platform
[ 29.792795] Booting paravirtualized kernel on bare hardware
[ 29.792910] Time: 9:34:45 Date: 02/18/107
[ 29.792971] NET: Registered protocol family 16
[ 29.793025] PM: Adding info for No Bus:vtcon0
[ 29.793166] EISA bus registered
[ 29.818798] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=2
[ 29.818801] PCI: Using configuration type 1
[ 29.818804] Setting up standard PCI resources
[ 29.825477] ACPI: Interpreter disabled.
[ 29.825486] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.825507] pnp: PnP ACPI: disabled
[ 29.825512] PnPBIOS: Scanning system for PnP BIOS support...
[ 29.825571] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc20
[ 29.825576] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc50, dseg 0xf0000
[ 29.825592] PM: Adding info for No Bus:pnp0
[ 29.825628] PM: Adding info for pnp:00:00
[ 29.825738] PM: Adding info for pnp:00:01
[ 29.825793] PM: Adding info for pnp:00:02
[ 29.825848] PM: Adding info for pnp:00:03
[ 29.825898] PM: Adding info for pnp:00:04
[ 29.825958] PM: Adding info for pnp:00:05
[ 29.826014] PM: Adding info for pnp:00:06
[ 29.826066] PM: Adding info for pnp:00:07
[ 29.826119] PM: Adding info for pnp:00:08
[ 29.826171] PM: Adding info for pnp:00:09
[ 29.826223] PM: Adding info for pnp:00:0a
[ 29.826292] PM: Adding info for pnp:00:0b
[ 29.826390] PM: Adding info for pnp:00:0c
[ 29.826472] PM: Adding info for pnp:00:0d
[ 29.826580] PM: Adding info for pnp:00:0f
[ 29.826684] PM: Adding info for pnp:00:10
[ 29.826776] PM: Adding info for pnp:00:11
[ 29.826868] PM: Adding info for pnp:00:12
[ 29.826925] PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
[ 29.827000] PCI: Probing PCI hardware
[ 29.827007] PCI: Probing PCI hardware (bus 00)
[ 29.827019] PM: Adding info for No Bus:pci0000:00
[ 29.827290] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 29.827295] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 29.827659] Boot video device is 0000:01:00.0
[ 29.827896] PCI: Transparent bridge - 0000:00:1e.0
[ 29.827925] PM: Adding info for pci:0000:00:00.0
[ 29.827993] PM: Adding info for pci:0000:00:01.0
[ 29.828047] PM: Adding info for pci:0000:00:1e.0
[ 29.828095] PM: Adding info for pci:0000:00:1f.0
[ 29.828152] PM: Adding info for pci:0000:00:1f.1
[ 29.828213] PM: Adding info for pci:0000:00:1f.2
[ 29.828264] PM: Adding info for pci:0000:00:1f.3
[ 29.828317] PM: Adding info for pci:0000:00:1f.4
[ 29.828369] PM: Adding info for pci:0000:00:1f.5
[ 29.828453] PM: Adding info for pci:0000:01:00.0
[ 29.828516] PM: Adding info for pci:0000:02:01.0
[ 29.828571] PM: Adding info for pci:0000:02:05.0
[ 29.828729] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
[ 29.828750] PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19
[ 29.828755] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
[ 29.828760] PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 23
[ 29.828764] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
[ 29.828768] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 29.828772] PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 21
[ 29.828777] PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 21
[ 29.844069] NET: Registered protocol family 8
[ 29.844072] NET: Registered protocol family 20
[ 29.844237] PM: Adding info for No Bus:mem
[ 29.844296] PM: Adding info for No Bus:kmem
[ 29.844337] PM: Adding info for No Bus:null
[ 29.844374] PM: Adding info for No Bus:port
[ 29.844449] PM: Adding info for No Bus:zero
[ 29.844492] PM: Adding info for No Bus:full
[ 29.844529] PM: Adding info for No Bus:random
[ 29.844567] PM: Adding info for No Bus:urandom
[ 29.844604] PM: Adding info for No Bus:kmsg
[ 29.844641] PM: Adding info for No Bus:oldmem
[ 29.844728] PCI: Bridge: 0000:00:01.0
[ 29.844732] IO window: c000-cfff
[ 29.844737] MEM window: ec000000-edffffff
[ 29.844742] PREFETCH window: e0000000-e7ffffff
[ 29.844748] PCI: Bridge: 0000:00:1e.0
[ 29.844752] IO window: a000-bfff
[ 29.844758] MEM window: ee000000-efffffff
[ 29.844763] PREFETCH window: 30000000-300fffff
[ 29.844787] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 29.844833] NET: Registered protocol family 2
[ 29.872431] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 29.872568] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 29.872659] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 29.872712] TCP: Hash tables configured (established 16384 bind 8192)
[ 29.872717] TCP reno registered
[ 29.884540] checking if image is initramfs... it is
[ 35.451156] Freeing initrd memory: 40600k freed
[ 35.451425] PM: Adding info for platform:pcspkr
[ 35.451824] PM: Adding info for No Bus:snapshot
[ 35.451877] audit: initializing netlink socket (disabled)
[ 35.451905] audit(1174210491.016:1): initialized
[ 35.452127] VFS: Disk quotas dquot_6.5.1
[ 35.452160] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 35.452261] io scheduler noop registered
[ 35.452265] io scheduler anticipatory registered
[ 35.452268] io scheduler deadline registered
[ 35.452283] io scheduler cfq registered (default)
[ 35.452654] PM: Adding info for No Bus:pnp1
[ 35.452664] isapnp: Scanning for PnP cards...
[ 35.806394] isapnp: No Plug & Play device found
[ 35.806422] PM: Adding info for No Bus:tty
[ 35.806505] PM: Adding info for No Bus:console
[ 35.806548] PM: Adding info for No Bus:ptmx
[ 35.806590] PM: Adding info for No Bus:tty0
[ 35.806651] PM: Adding info for No Bus:vcs
[ 35.806691] PM: Adding info for No Bus:vcsa
[ 35.806739] PM: Adding info for No Bus:tty1
[ 35.806789] PM: Adding info for No Bus:tty2
[ 35.806829] PM: Adding info for No Bus:tty3
[ 35.806868] PM: Adding info for No Bus:tty4
[ 35.806908] PM: Adding info for No Bus:tty5
[ 35.806946] PM: Adding info for No Bus:tty6
[ 35.806987] PM: Adding info for No Bus:tty7
[ 35.807035] PM: Adding info for No Bus:tty8
[ 35.807082] PM: Adding info for No Bus:tty9
[ 35.807122] PM: Adding info for No Bus:tty10
[ 35.807171] PM: Adding info for No Bus:tty11
[ 35.807214] PM: Adding info for No Bus:tty12
[ 35.807255] PM: Adding info for No Bus:tty13
[ 35.807300] PM: Adding info for No Bus:tty14
[ 35.807349] PM: Adding info for No Bus:tty15
[ 35.807391] PM: Adding info for No Bus:tty16
[ 35.807434] PM: Adding info for No Bus:tty17
[ 35.807494] PM: Adding info for No Bus:tty18
[ 35.807537] PM: Adding info for No Bus:tty19
[ 35.807580] PM: Adding info for No Bus:tty20
[ 35.807632] PM: Adding info for No Bus:tty21
[ 35.807676] PM: Adding info for No Bus:tty22
[ 35.807722] PM: Adding info for No Bus:tty23
[ 35.807764] PM: Adding info for No Bus:tty24
[ 35.807807] PM: Adding info for No Bus:tty25
[ 35.807851] PM: Adding info for No Bus:tty26
[ 35.807893] PM: Adding info for No Bus:tty27
[ 35.807946] PM: Adding info for No Bus:tty28
[ 35.807992] PM: Adding info for No Bus:tty29
[ 35.808034] PM: Adding info for No Bus:tty30
[ 35.808079] PM: Adding info for No Bus:tty31
[ 35.808126] PM: Adding info for No Bus:tty32
[ 35.808171] PM: Adding info for No Bus:tty33
[ 35.808220] PM: Adding info for No Bus:tty34
[ 35.808266] PM: Adding info for No Bus:tty35
[ 35.808310] PM: Adding info for No Bus:tty36
[ 35.808355] PM: Adding info for No Bus:tty37
[ 35.808401] PM: Adding info for No Bus:tty38
[ 35.808447] PM: Adding info for No Bus:tty39
[ 35.808489] PM: Adding info for No Bus:tty40
[ 35.808550] PM: Adding info for No Bus:tty41
[ 35.808594] PM: Adding info for No Bus:tty42
[ 35.808638] PM: Adding info for No Bus:tty43
[ 35.808686] PM: Adding info for No Bus:tty44
[ 35.808730] PM: Adding info for No Bus:tty45
[ 35.808774] PM: Adding info for No Bus:tty46
[ 35.808833] PM: Adding info for No Bus:tty47
[ 35.808879] PM: Adding info for No Bus:tty48
[ 35.808924] PM: Adding info for No Bus:tty49
[ 35.808974] PM: Adding info for No Bus:tty50
[ 35.809023] PM: Adding info for No Bus:tty51
[ 35.809068] PM: Adding info for No Bus:tty52
[ 35.809115] PM: Adding info for No Bus:tty53
[ 35.809172] PM: Adding info for No Bus:tty54
[ 35.809219] PM: Adding info for No Bus:tty55
[ 35.809268] PM: Adding info for No Bus:tty56
[ 35.809316] PM: Adding info for No Bus:tty57
[ 35.809363] PM: Adding info for No Bus:tty58
[ 35.809412] PM: Adding info for No Bus:tty59
[ 35.809471] PM: Adding info for No Bus:tty60
[ 35.809521] PM: Adding info for No Bus:tty61
[ 35.809571] PM: Adding info for No Bus:tty62
[ 35.809619] PM: Adding info for No Bus:tty63
[ 35.809752] PM: Adding info for No Bus:ptyp0
[ 35.809816] PM: Adding info for No Bus:ptyp1
[ 35.809864] PM: Adding info for No Bus:ptyp2
[ 35.809924] PM: Adding info for No Bus:ptyp3
[ 35.809975] PM: Adding info for No Bus:ptyp4
[ 35.810022] PM: Adding info for No Bus:ptyp5
[ 35.810068] PM: Adding info for No Bus:ptyp6
[ 35.810122] PM: Adding info for No Bus:ptyp7
[ 35.810169] PM: Adding info for No Bus:ptyp8
[ 35.810231] PM: Adding info for No Bus:ptyp9
[ 35.810280] PM: Adding info for No Bus:ptypa
[ 35.810329] PM: Adding info for No Bus:ptypb
[ 35.810377] PM: Adding info for No Bus:ptypc
[ 35.810427] PM: Adding info for No Bus:ptypd
[ 35.810478] PM: Adding info for No Bus:ptype
[ 35.810528] PM: Adding info for No Bus:ptypf
[ 35.810589] PM: Adding info for No Bus:ptyq0
[ 35.810639] PM: Adding info for No Bus:ptyq1
[ 35.810686] PM: Adding info for No Bus:ptyq2
[ 35.810739] PM: Adding info for No Bus:ptyq3
[ 35.810791] PM: Adding info for No Bus:ptyq4
[ 35.810839] PM: Adding info for No Bus:ptyq5
[ 35.810900] PM: Adding info for No Bus:ptyq6
[ 35.810947] PM: Adding info for No Bus:ptyq7
[ 35.810993] PM: Adding info for No Bus:ptyq8
[ 35.811043] PM: Adding info for No Bus:ptyq9
[ 35.811090] PM: Adding info for No Bus:ptyqa
[ 35.811143] PM: Adding info for No Bus:ptyqb
[ 35.811196] PM: Adding info for No Bus:ptyqc
[ 35.811259] PM: Adding info for No Bus:ptyqd
[ 35.811318] PM: Adding info for No Bus:ptyqe
[ 35.811373] PM: Adding info for No Bus:ptyqf
[ 35.811425] PM: Adding info for No Bus:ptyr0
[ 35.811545] PM: Adding info for No Bus:ptyr1
[ 35.811604] PM: Adding info for No Bus:ptyr2
[ 35.811667] PM: Adding info for No Bus:ptyr3
[ 35.811718] PM: Adding info for No Bus:ptyr4
[ 35.811773] PM: Adding info for No Bus:ptyr5
[ 35.811824] PM: Adding info for No Bus:ptyr6
[ 35.811874] PM: Adding info for No Bus:ptyr7
[ 35.811930] PM: Adding info for No Bus:ptyr8
[ 35.811983] PM: Adding info for No Bus:ptyr9
[ 35.812051] PM: Adding info for No Bus:ptyra
[ 35.812111] PM: Adding info for No Bus:ptyrb
[ 35.812167] PM: Adding info for No Bus:ptyrc
[ 35.812220] PM: Adding info for No Bus:ptyrd
[ 35.812274] PM: Adding info for No Bus:ptyre
[ 35.812329] PM: Adding info for No Bus:ptyrf
[ 35.812393] PM: Adding info for No Bus:ptys0
[ 35.812451] PM: Adding info for No Bus:ptys1
[ 35.812504] PM: Adding info for No Bus:ptys2
[ 35.812559] PM: Adding info for No Bus:ptys3
[ 35.812617] PM: Adding info for No Bus:ptys4
[ 35.812671] PM: Adding info for No Bus:ptys5
[ 35.812726] PM: Adding info for No Bus:ptys6
[ 35.812797] PM: Adding info for No Bus:ptys7
[ 35.812852] PM: Adding info for No Bus:ptys8
[ 35.812909] PM: Adding info for No Bus:ptys9
[ 35.812970] PM: Adding info for No Bus:ptysa
[ 35.813028] PM: Adding info for No Bus:ptysb
[ 35.813083] PM: Adding info for No Bus:ptysc
[ 35.813150] PM: Adding info for No Bus:ptysd
[ 35.813210] PM: Adding info for No Bus:ptyse
[ 35.813267] PM: Adding info for No Bus:ptysf
[ 35.813326] PM: Adding info for No Bus:ptyt0
[ 35.813381] PM: Adding info for No Bus:ptyt1
[ 35.813436] PM: Adding info for No Bus:ptyt2
[ 35.813502] PM: Adding info for No Bus:ptyt3
[ 35.813572] PM: Adding info for No Bus:ptyt4
[ 35.813631] PM: Adding info for No Bus:ptyt5
[ 35.813691] PM: Adding info for No Bus:ptyt6
[ 35.813756] PM: Adding info for No Bus:ptyt7
[ 35.813816] PM: Adding info for No Bus:ptyt8
[ 35.813874] PM: Adding info for No Bus:ptyt9
[ 35.813945] PM: Adding info for No Bus:ptyta
[ 35.814007] PM: Adding info for No Bus:ptytb
[ 35.814074] PM: Adding info for No Bus:ptytc
[ 35.814137] PM: Adding info for No Bus:ptytd
[ 35.814201] PM: Adding info for No Bus:ptyte
[ 35.814270] PM: Adding info for No Bus:ptytf
[ 35.814341] PM: Adding info for No Bus:ptyu0
[ 35.814419] PM: Adding info for No Bus:ptyu1
[ 35.814486] PM: Adding info for No Bus:ptyu2
[ 35.814553] PM: Adding info for No Bus:ptyu3
[ 35.814618] PM: Adding info for No Bus:ptyu4
[ 35.814681] PM: Adding info for No Bus:ptyu5
[ 35.814748] PM: Adding info for No Bus:ptyu6
[ 35.814824] PM: Adding info for No Bus:ptyu7
[ 35.814896] PM: Adding info for No Bus:ptyu8
[ 35.814961] PM: Adding info for No Bus:ptyu9
[ 35.815024] PM: Adding info for No Bus:ptyua
[ 35.815097] PM: Adding info for No Bus:ptyub
[ 35.815165] PM: Adding info for No Bus:ptyuc
[ 35.815232] PM: Adding info for No Bus:ptyud
[ 35.815362] PM: Adding info for No Bus:ptyue
[ 35.815434] PM: Adding info for No Bus:ptyuf
[ 35.815566] PM: Adding info for No Bus:ptyv0
[ 35.815636] PM: Adding info for No Bus:ptyv1
[ 35.815701] PM: Adding info for No Bus:ptyv2
[ 35.815773] PM: Adding info for No Bus:ptyv3
[ 35.815859] PM: Adding info for No Bus:ptyv4
[ 35.815931] PM: Adding info for No Bus:ptyv5
[ 35.815999] PM: Adding info for No Bus:ptyv6
[ 35.816071] PM: Adding info for No Bus:ptyv7
[ 35.816141] PM: Adding info for No Bus:ptyv8
[ 35.816211] PM: Adding info for No Bus:ptyv9
[ 35.816282] PM: Adding info for No Bus:ptyva
[ 35.816370] PM: Adding info for No Bus:ptyvb
[ 35.816440] PM: Adding info for No Bus:ptyvc
[ 35.816516] PM: Adding info for No Bus:ptyvd
[ 35.816590] PM: Adding info for No Bus:ptyve
[ 35.816660] PM: Adding info for No Bus:ptyvf
[ 35.816736] PM: Adding info for No Bus:ptyw0
[ 35.816817] PM: Adding info for No Bus:ptyw1
[ 35.816898] PM: Adding info for No Bus:ptyw2
[ 35.816983] PM: Adding info for No Bus:ptyw3
[ 35.817055] PM: Adding info for No Bus:ptyw4
[ 35.817130] PM: Adding info for No Bus:ptyw5
[ 35.817205] PM: Adding info for No Bus:ptyw6
[ 35.817283] PM: Adding info for No Bus:ptyw7
[ 35.817370] PM: Adding info for No Bus:ptyw8
[ 35.817447] PM: Adding info for No Bus:ptyw9
[ 35.817524] PM: Adding info for No Bus:ptywa
[ 35.817606] PM: Adding info for No Bus:ptywb
[ 35.817688] PM: Adding info for No Bus:ptywc
[ 35.817775] PM: Adding info for No Bus:ptywd
[ 35.817866] PM: Adding info for No Bus:ptywe
[ 35.817955] PM: Adding info for No Bus:ptywf
[ 35.818036] PM: Adding info for No Bus:ptyx0
[ 35.818119] PM: Adding info for No Bus:ptyx1
[ 35.818201] PM: Adding info for No Bus:ptyx2
[ 35.818287] PM: Adding info for No Bus:ptyx3
[ 35.818373] PM: Adding info for No Bus:ptyx4
[ 35.818473] PM: Adding info for No Bus:ptyx5
[ 35.818558] PM: Adding info for No Bus:ptyx6
[ 35.818641] PM: Adding info for No Bus:ptyx7
[ 35.818729] PM: Adding info for No Bus:ptyx8
[ 35.818815] PM: Adding info for No Bus:ptyx9
[ 35.818901] PM: Adding info for No Bus:ptyxa
[ 35.819008] PM: Adding info for No Bus:ptyxb
[ 35.819102] PM: Adding info for No Bus:ptyxc
[ 35.819188] PM: Adding info for No Bus:ptyxd
[ 35.819324] PM: Adding info for No Bus:ptyxe
[ 35.819426] PM: Adding info for No Bus:ptyxf
[ 35.819597] PM: Adding info for No Bus:ptyy0
[ 35.819694] PM: Adding info for No Bus:ptyy1
[ 35.819795] PM: Adding info for No Bus:ptyy2
[ 35.819890] PM: Adding info for No Bus:ptyy3
[ 35.819983] PM: Adding info for No Bus:ptyy4
[ 35.820073] PM: Adding info for No Bus:ptyy5
[ 35.820160] PM: Adding info for No Bus:ptyy6
[ 35.820254] PM: Adding info for No Bus:ptyy7
[ 35.820355] PM: Adding info for No Bus:ptyy8
[ 35.820444] PM: Adding info for No Bus:ptyy9
[ 35.820534] PM: Adding info for No Bus:ptyya
[ 35.820632] PM: Adding info for No Bus:ptyyb
[ 35.820727] PM: Adding info for No Bus:ptyyc
[ 35.820823] PM: Adding info for No Bus:ptyyd
[ 35.820918] PM: Adding info for No Bus:ptyye
[ 35.821026] PM: Adding info for No Bus:ptyyf
[ 35.821126] PM: Adding info for No Bus:ptyz0
[ 35.821225] PM: Adding info for No Bus:ptyz1
[ 35.821323] PM: Adding info for No Bus:ptyz2
[ 35.821432] PM: Adding info for No Bus:ptyz3
[ 35.821532] PM: Adding info for No Bus:ptyz4
[ 35.821640] PM: Adding info for No Bus:ptyz5
[ 35.821745] PM: Adding info for No Bus:ptyz6
[ 35.821846] PM: Adding info for No Bus:ptyz7
[ 35.821949] PM: Adding info for No Bus:ptyz8
[ 35.822052] PM: Adding info for No Bus:ptyz9
[ 35.822160] PM: Adding info for No Bus:ptyza
[ 35.822265] PM: Adding info for No Bus:ptyzb
[ 35.822383] PM: Adding info for No Bus:ptyzc
[ 35.822484] PM: Adding info for No Bus:ptyzd
[ 35.822587] PM: Adding info for No Bus:ptyze
[ 35.822699] PM: Adding info for No Bus:ptyzf
[ 35.822801] PM: Adding info for No Bus:ptya0
[ 35.822901] PM: Adding info for No Bus:ptya1
[ 35.823023] PM: Adding info for No Bus:ptya2
[ 35.823134] PM: Adding info for No Bus:ptya3
[ 35.823243] PM: Adding info for No Bus:ptya4
[ 35.823407] PM: Adding info for No Bus:ptya5
[ 35.823600] PM: Adding info for No Bus:ptya6
[ 35.823712] PM: Adding info for No Bus:ptya7
[ 35.823827] PM: Adding info for No Bus:ptya8
[ 35.823946] PM: Adding info for No Bus:ptya9
[ 35.824057] PM: Adding info for No Bus:ptyaa
[ 35.824178] PM: Adding info for No Bus:ptyab
[ 35.824286] PM: Adding info for No Bus:ptyac
[ 35.824397] PM: Adding info for No Bus:ptyad
[ 35.824508] PM: Adding info for No Bus:ptyae
[ 35.824630] PM: Adding info for No Bus:ptyaf
[ 35.824739] PM: Adding info for No Bus:ptyb0
[ 35.824848] PM: Adding info for No Bus:ptyb1
[ 35.824954] PM: Adding info for No Bus:ptyb2
[ 35.825064] PM: Adding info for No Bus:ptyb3
[ 35.825175] PM: Adding info for No Bus:ptyb4
[ 35.825283] PM: Adding info for No Bus:ptyb5
[ 35.825409] PM: Adding info for No Bus:ptyb6
[ 35.825535] PM: Adding info for No Bus:ptyb7
[ 35.825650] PM: Adding info for No Bus:ptyb8
[ 35.825766] PM: Adding info for No Bus:ptyb9
[ 35.825886] PM: Adding info for No Bus:ptyba
[ 35.826009] PM: Adding info for No Bus:ptybb
[ 35.826134] PM: Adding info for No Bus:ptybc
[ 35.826258] PM: Adding info for No Bus:ptybd
[ 35.826379] PM: Adding info for No Bus:ptybe
[ 35.826500] PM: Adding info for No Bus:ptybf
[ 35.826626] PM: Adding info for No Bus:ptyc0
[ 35.826748] PM: Adding info for No Bus:ptyc1
[ 35.826872] PM: Adding info for No Bus:ptyc2
[ 35.827020] PM: Adding info for No Bus:ptyc3
[ 35.827150] PM: Adding info for No Bus:ptyc4
[ 35.827312] PM: Adding info for No Bus:ptyc5
[ 35.827529] PM: Adding info for No Bus:ptyc6
[ 35.827666] PM: Adding info for No Bus:ptyc7
[ 35.827791] PM: Adding info for No Bus:ptyc8
[ 35.827926] PM: Adding info for No Bus:ptyc9
[ 35.828054] PM: Adding info for No Bus:ptyca
[ 35.828184] PM: Adding info for No Bus:ptycb
[ 35.828311] PM: Adding info for No Bus:ptycc
[ 35.828434] PM: Adding info for No Bus:ptycd
[ 35.828555] PM: Adding info for No Bus:ptyce
[ 35.828688] PM: Adding info for No Bus:ptycf
[ 35.828827] PM: Adding info for No Bus:ptyd0
[ 35.828958] PM: Adding info for No Bus:ptyd1
[ 35.829084] PM: Adding info for No Bus:ptyd2
[ 35.829222] PM: Adding info for No Bus:ptyd3
[ 35.829360] PM: Adding info for No Bus:ptyd4
[ 35.829495] PM: Adding info for No Bus:ptyd5
[ 35.829638] PM: Adding info for No Bus:ptyd6
[ 35.829789] PM: Adding info for No Bus:ptyd7
[ 35.829925] PM: Adding info for No Bus:ptyd8
[ 35.830061] PM: Adding info for No Bus:ptyd9
[ 35.830201] PM: Adding info for No Bus:ptyda
[ 35.830348] PM: Adding info for No Bus:ptydb
[ 35.830485] PM: Adding info for No Bus:ptydc
[ 35.830644] PM: Adding info for No Bus:ptydd
[ 35.830783] PM: Adding info for No Bus:ptyde
[ 35.830921] PM: Adding info for No Bus:ptydf
[ 35.831062] PM: Adding info for No Bus:ptye0
[ 35.831202] PM: Adding info for No Bus:ptye1
[ 35.831493] PM: Adding info for No Bus:ptye2
[ 35.831689] PM: Adding info for No Bus:ptye3
[ 35.831836] PM: Adding info for No Bus:ptye4
[ 35.831973] PM: Adding info for No Bus:ptye5
[ 35.832106] PM: Adding info for No Bus:ptye6
[ 35.832247] PM: Adding info for No Bus:ptye7
[ 35.832380] PM: Adding info for No Bus:ptye8
[ 35.832509] PM: Adding info for No Bus:ptye9
[ 35.832657] PM: Adding info for No Bus:ptyea
[ 35.832799] PM: Adding info for No Bus:ptyeb
[ 35.832929] PM: Adding info for No Bus:ptyec
[ 35.833067] PM: Adding info for No Bus:ptyed
[ 35.833203] PM: Adding info for No Bus:ptyee
[ 35.833343] PM: Adding info for No Bus:ptyef
[ 35.833499] PM: Adding info for No Bus:ttyp0
[ 35.833644] PM: Adding info for No Bus:ttyp1
[ 35.833773] PM: Adding info for No Bus:ttyp2
[ 35.833918] PM: Adding info for No Bus:ttyp3
[ 35.834061] PM: Adding info for No Bus:ttyp4
[ 35.834201] PM: Adding info for No Bus:ttyp5
[ 35.834338] PM: Adding info for No Bus:ttyp6
[ 35.834491] PM: Adding info for No Bus:ttyp7
[ 35.834630] PM: Adding info for No Bus:ttyp8
[ 35.834770] PM: Adding info for No Bus:ttyp9
[ 35.834911] PM: Adding info for No Bus:ttypa
[ 35.835057] PM: Adding info for No Bus:ttypb
[ 35.835199] PM: Adding info for No Bus:ttypc
[ 35.835499] PM: Adding info for No Bus:ttypd
[ 35.835680] PM: Adding info for No Bus:ttype
[ 35.835831] PM: Adding info for No Bus:ttypf
[ 35.835971] PM: Adding info for No Bus:ttyq0
[ 35.836107] PM: Adding info for No Bus:ttyq1
[ 35.836250] PM: Adding info for No Bus:ttyq2
[ 35.836399] PM: Adding info for No Bus:ttyq3
[ 35.836555] PM: Adding info for No Bus:ttyq4
[ 35.836693] PM: Adding info for No Bus:ttyq5
[ 35.836832] PM: Adding info for No Bus:ttyq6
[ 35.836969] PM: Adding info for No Bus:ttyq7
[ 35.837108] PM: Adding info for No Bus:ttyq8
[ 35.837245] PM: Adding info for No Bus:ttyq9
[ 35.837396] PM: Adding info for No Bus:ttyqa
[ 35.837557] PM: Adding info for No Bus:ttyqb
[ 35.837709] PM: Adding info for No Bus:ttyqc
[ 35.837851] PM: Adding info for No Bus:ttyqd
[ 35.837997] PM: Adding info for No Bus:ttyqe
[ 35.838152] PM: Adding info for No Bus:ttyqf
[ 35.838303] PM: Adding info for No Bus:ttyr0
[ 35.838471] PM: Adding info for No Bus:ttyr1
[ 35.838627] PM: Adding info for No Bus:ttyr2
[ 35.838788] PM: Adding info for No Bus:ttyr3
[ 35.838940] PM: Adding info for No Bus:ttyr4
[ 35.839091] PM: Adding info for No Bus:ttyr5
[ 35.839312] PM: Adding info for No Bus:ttyr6
[ 35.839594] PM: Adding info for No Bus:ttyr7
[ 35.839776] PM: Adding info for No Bus:ttyr8
[ 35.839931] PM: Adding info for No Bus:ttyr9
[ 35.840083] PM: Adding info for No Bus:ttyra
[ 35.840251] PM: Adding info for No Bus:ttyrb
[ 35.840407] PM: Adding info for No Bus:ttyrc
[ 35.840561] PM: Adding info for No Bus:ttyrd
[ 35.840730] PM: Adding info for No Bus:ttyre
[ 35.840888] PM: Adding info for No Bus:ttyrf
[ 35.841046] PM: Adding info for No Bus:ttys0
[ 35.841204] PM: Adding info for No Bus:ttys1
[ 35.841358] PM: Adding info for No Bus:ttys2
[ 35.841528] PM: Adding info for No Bus:ttys3
[ 35.841697] PM: Adding info for No Bus:ttys4
[ 35.841864] PM: Adding info for No Bus:ttys5
[ 35.842024] PM: Adding info for No Bus:ttys6
[ 35.842184] PM: Adding info for No Bus:ttys7
[ 35.842351] PM: Adding info for No Bus:ttys8
[ 35.842517] PM: Adding info for No Bus:ttys9
[ 35.842684] PM: Adding info for No Bus:ttysa
[ 35.842878] PM: Adding info for No Bus:ttysb
[ 35.843048] PM: Adding info for No Bus:ttysc
[ 35.843218] PM: Adding info for No Bus:ttysd
[ 35.843547] PM: Adding info for No Bus:ttyse
[ 35.843745] PM: Adding info for No Bus:ttysf
[ 35.843911] PM: Adding info for No Bus:ttyt0
[ 35.844087] PM: Adding info for No Bus:ttyt1
[ 35.844259] PM: Adding info for No Bus:ttyt2
[ 35.844432] PM: Adding info for No Bus:ttyt3
[ 35.844601] PM: Adding info for No Bus:ttyt4
[ 35.844764] PM: Adding info for No Bus:ttyt5
[ 35.844932] PM: Adding info for No Bus:ttyt6
[ 35.845096] PM: Adding info for No Bus:ttyt7
[ 35.845284] PM: Adding info for No Bus:ttyt8
[ 35.845452] PM: Adding info for No Bus:ttyt9
[ 35.845626] PM: Adding info for No Bus:ttyta
[ 35.845807] PM: Adding info for No Bus:ttytb
[ 35.845976] PM: Adding info for No Bus:ttytc
[ 35.846142] PM: Adding info for No Bus:ttytd
[ 35.846320] PM: Adding info for No Bus:ttyte
[ 35.846507] PM: Adding info for No Bus:ttytf
[ 35.846688] PM: Adding info for No Bus:ttyu0
[ 35.846865] PM: Adding info for No Bus:ttyu1
[ 35.847049] PM: Adding info for No Bus:ttyu2
[ 35.847230] PM: Adding info for No Bus:ttyu3
[ 35.847595] PM: Adding info for No Bus:ttyu4
[ 35.847803] PM: Adding info for No Bus:ttyu5
[ 35.847979] PM: Adding info for No Bus:ttyu6
[ 35.848161] PM: Adding info for No Bus:ttyu7
[ 35.848338] PM: Adding info for No Bus:ttyu8
[ 35.848511] PM: Adding info for No Bus:ttyu9
[ 35.848683] PM: Adding info for No Bus:ttyua
[ 35.848875] PM: Adding info for No Bus:ttyub
[ 35.849064] PM: Adding info for No Bus:ttyuc
[ 35.849242] PM: Adding info for No Bus:ttyud
[ 35.849422] PM: Adding info for No Bus:ttyue
[ 35.849598] PM: Adding info for No Bus:ttyuf
[ 35.849781] PM: Adding info for No Bus:ttyv0
[ 35.849956] PM: Adding info for No Bus:ttyv1
[ 35.850152] PM: Adding info for No Bus:ttyv2
[ 35.850341] PM: Adding info for No Bus:ttyv3
[ 35.850522] PM: Adding info for No Bus:ttyv4
[ 35.850713] PM: Adding info for No Bus:ttyv5
[ 35.850902] PM: Adding info for No Bus:ttyv6
[ 35.851096] PM: Adding info for No Bus:ttyv7
[ 35.851375] PM: Adding info for No Bus:ttyv8
[ 35.851692] PM: Adding info for No Bus:ttyv9
[ 35.851886] PM: Adding info for No Bus:ttyva
[ 35.852087] PM: Adding info for No Bus:ttyvb
[ 35.852277] PM: Adding info for No Bus:ttyvc
[ 35.852465] PM: Adding info for No Bus:ttyvd
[ 35.852653] PM: Adding info for No Bus:ttyve
[ 35.852863] PM: Adding info for No Bus:ttyvf
[ 35.853056] PM: Adding info for No Bus:ttyw0
[ 35.853251] PM: Adding info for No Bus:ttyw1
[ 35.853446] PM: Adding info for No Bus:ttyw2
[ 35.853641] PM: Adding info for No Bus:ttyw3
[ 35.853835] PM: Adding info for No Bus:ttyw4
[ 35.854040] PM: Adding info for No Bus:ttyw5
[ 35.854242] PM: Adding info for No Bus:ttyw6
[ 35.854439] PM: Adding info for No Bus:ttyw7
[ 35.854637] PM: Adding info for No Bus:ttyw8
[ 35.854838] PM: Adding info for No Bus:ttyw9
[ 35.855041] PM: Adding info for No Bus:ttywa
[ 35.855319] PM: Adding info for No Bus:ttywb
[ 35.855645] PM: Adding info for No Bus:ttywc
[ 35.855854] PM: Adding info for No Bus:ttywd
[ 35.856053] PM: Adding info for No Bus:ttywe
[ 35.856250] PM: Adding info for No Bus:ttywf
[ 35.856441] PM: Adding info for No Bus:ttyx0
[ 35.856634] PM: Adding info for No Bus:ttyx1
[ 35.856842] PM: Adding info for No Bus:ttyx2
[ 35.857059] PM: Adding info for No Bus:ttyx3
[ 35.857264] PM: Adding info for No Bus:ttyx4
[ 35.857465] PM: Adding info for No Bus:ttyx5
[ 35.857662] PM: Adding info for No Bus:ttyx6
[ 35.857867] PM: Adding info for No Bus:ttyx7
[ 35.858064] PM: Adding info for No Bus:ttyx8
[ 35.858285] PM: Adding info for No Bus:ttyx9
[ 35.858488] PM: Adding info for No Bus:ttyxa
[ 35.858703] PM: Adding info for No Bus:ttyxb
[ 35.858917] PM: Adding info for No Bus:ttyxc
[ 35.859131] PM: Adding info for No Bus:ttyxd
[ 35.859515] PM: Adding info for No Bus:ttyxe
[ 35.859779] PM: Adding info for No Bus:ttyxf
[ 35.860003] PM: Adding info for No Bus:ttyy0
[ 35.860213] PM: Adding info for No Bus:ttyy1
[ 35.860419] PM: Adding info for No Bus:ttyy2
[ 35.860644] PM: Adding info for No Bus:ttyy3
[ 35.860855] PM: Adding info for No Bus:ttyy4
[ 35.861065] PM: Adding info for No Bus:ttyy5
[ 35.861292] PM: Adding info for No Bus:ttyy6
[ 35.861502] PM: Adding info for No Bus:ttyy7
[ 35.861711] PM: Adding info for No Bus:ttyy8
[ 35.861919] PM: Adding info for No Bus:ttyy9
[ 35.862130] PM: Adding info for No Bus:ttyya
[ 35.862353] PM: Adding info for No Bus:ttyyb
[ 35.862578] PM: Adding info for No Bus:ttyyc
[ 35.862797] PM: Adding info for No Bus:ttyyd
[ 35.863019] PM: Adding info for No Bus:ttyye
[ 35.863312] PM: Adding info for No Bus:ttyyf
[ 35.863663] PM: Adding info for No Bus:ttyz0
[ 35.863893] PM: Adding info for No Bus:ttyz1
[ 35.864115] PM: Adding info for No Bus:ttyz2
[ 35.864354] PM: Adding info for No Bus:ttyz3
[ 35.864574] PM: Adding info for No Bus:ttyz4
[ 35.864793] PM: Adding info for No Bus:ttyz5
[ 35.865017] PM: Adding info for No Bus:ttyz6
[ 35.865241] PM: Adding info for No Bus:ttyz7
[ 35.865465] PM: Adding info for No Bus:ttyz8
[ 35.865698] PM: Adding info for No Bus:ttyz9
[ 35.865927] PM: Adding info for No Bus:ttyza
[ 35.866162] PM: Adding info for No Bus:ttyzb
[ 35.866392] PM: Adding info for No Bus:ttyzc
[ 35.866614] PM: Adding info for No Bus:ttyzd
[ 35.866840] PM: Adding info for No Bus:ttyze
[ 35.867064] PM: Adding info for No Bus:ttyzf
[ 35.867472] PM: Adding info for No Bus:ttya0
[ 35.867750] PM: Adding info for No Bus:ttya1
[ 35.867979] PM: Adding info for No Bus:ttya2
[ 35.868218] PM: Adding info for No Bus:ttya3
[ 35.868444] PM: Adding info for No Bus:ttya4
[ 35.868672] PM: Adding info for No Bus:ttya5
[ 35.868910] PM: Adding info for No Bus:ttya6
[ 35.869149] PM: Adding info for No Bus:ttya7
[ 35.869374] PM: Adding info for No Bus:ttya8
[ 35.869611] PM: Adding info for No Bus:ttya9
[ 35.869842] PM: Adding info for No Bus:ttyaa
[ 35.870078] PM: Adding info for No Bus:ttyab
[ 35.870308] PM: Adding info for No Bus:ttyac
[ 35.870563] PM: Adding info for No Bus:ttyad
[ 35.870791] PM: Adding info for No Bus:ttyae
[ 35.871028] PM: Adding info for No Bus:ttyaf
[ 35.871339] PM: Adding info for No Bus:ttyb0
[ 35.871717] PM: Adding info for No Bus:ttyb1
[ 35.871956] PM: Adding info for No Bus:ttyb2
[ 35.872213] PM: Adding info for No Bus:ttyb3
[ 35.872449] PM: Adding info for No Bus:ttyb4
[ 35.872687] PM: Adding info for No Bus:ttyb5
[ 35.872921] PM: Adding info for No Bus:ttyb6
[ 35.873163] PM: Adding info for No Bus:ttyb7
[ 35.873401] PM: Adding info for No Bus:ttyb8
[ 35.873647] PM: Adding info for No Bus:ttyb9
[ 35.873908] PM: Adding info for No Bus:ttyba
[ 35.874156] PM: Adding info for No Bus:ttybb
[ 35.874397] PM: Adding info for No Bus:ttybc
[ 35.874647] PM: Adding info for No Bus:ttybd
[ 35.874895] PM: Adding info for No Bus:ttybe
[ 35.875152] PM: Adding info for No Bus:ttybf
[ 35.875609] PM: Adding info for No Bus:ttyc0
[ 35.875894] PM: Adding info for No Bus:ttyc1
[ 35.876146] PM: Adding info for No Bus:ttyc2
[ 35.876407] PM: Adding info for No Bus:ttyc3
[ 35.876663] PM: Adding info for No Bus:ttyc4
[ 35.876911] PM: Adding info for No Bus:ttyc5
[ 35.877166] PM: Adding info for No Bus:ttyc6
[ 35.877436] PM: Adding info for No Bus:ttyc7
[ 35.877694] PM: Adding info for No Bus:ttyc8
[ 35.877956] PM: Adding info for No Bus:ttyc9
[ 35.878212] PM: Adding info for No Bus:ttyca
[ 35.878481] PM: Adding info for No Bus:ttycb
[ 35.878738] PM: Adding info for No Bus:ttycc
[ 35.879007] PM: Adding info for No Bus:ttycd
[ 35.879449] PM: Adding info for No Bus:ttyce
[ 35.879779] PM: Adding info for No Bus:ttycf
[ 35.880045] PM: Adding info for No Bus:ttyd0
[ 35.880308] PM: Adding info for No Bus:ttyd1
[ 35.880574] PM: Adding info for No Bus:ttyd2
[ 35.880848] PM: Adding info for No Bus:ttyd3
[ 35.881126] PM: Adding info for No Bus:ttyd4
[ 35.881394] PM: Adding info for No Bus:ttyd5
[ 35.881660] PM: Adding info for No Bus:ttyd6
[ 35.881932] PM: Adding info for No Bus:ttyd7
[ 35.882196] PM: Adding info for No Bus:ttyd8
[ 35.882465] PM: Adding info for No Bus:ttyd9
[ 35.882742] PM: Adding info for No Bus:ttyda
[ 35.883015] PM: Adding info for No Bus:ttydb
[ 35.883426] PM: Adding info for No Bus:ttydc
[ 35.883742] PM: Adding info for No Bus:ttydd
[ 35.884018] PM: Adding info for No Bus:ttyde
[ 35.884290] PM: Adding info for No Bus:ttydf
[ 35.884562] PM: Adding info for No Bus:ttye0
[ 35.884853] PM: Adding info for No Bus:ttye1
[ 35.885128] PM: Adding info for No Bus:ttye2
[ 35.885417] PM: Adding info for No Bus:ttye3
[ 35.885697] PM: Adding info for No Bus:ttye4
[ 35.885970] PM: Adding info for No Bus:ttye5
[ 35.886245] PM: Adding info for No Bus:ttye6
[ 35.886528] PM: Adding info for No Bus:ttye7
[ 35.886814] PM: Adding info for No Bus:ttye8
[ 35.887091] PM: Adding info for No Bus:ttye9
[ 35.887389] PM: Adding info for No Bus:ttyea
[ 35.887697] PM: Adding info for No Bus:ttyeb
[ 35.887987] PM: Adding info for No Bus:ttyec
[ 35.888272] PM: Adding info for No Bus:ttyed
[ 35.888575] PM: Adding info for No Bus:ttyee
[ 35.888867] PM: Adding info for No Bus:ttyef
[ 35.888966] PM: Adding info for No Bus:hpet
[ 35.889029] PM: Removing info for No Bus:hpet
[ 35.889085] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 35.889112] PM: Adding info for platform:serial8250
[ 35.889238] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.889521] PM: Adding info for No Bus:ttyS0
[ 35.889674] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.889907] PM: Adding info for No Bus:ttyS1
[ 35.890243] PM: Adding info for No Bus:ttyS2
[ 35.890573] PM: Adding info for No Bus:ttyS3
[ 35.891120] PM: Removing info for No Bus:ttyS0
[ 35.891252] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.891621] PM: Adding info for No Bus:ttyS0
[ 35.891892] PM: Removing info for No Bus:ttyS1
[ 35.892014] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.892288] PM: Adding info for No Bus:ttyS1
[ 35.892497] PM: Adding info for No Bus:isa
[ 35.893268] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 35.893536] input: Macintosh mouse button emulation as /class/input/input0
[ 35.893555] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 35.893561] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 35.893925] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 35.893985] PM: Adding info for platform:i8042
[ 35.896817] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.896825] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.896875] PM: Adding info for serio:serio0
[ 35.896969] PM: Adding info for serio:serio1
[ 35.897079] PM: Adding info for No Bus:psaux
[ 35.897118] mice: PS/2 mouse device common for all mice
[ 35.897256] PM: Adding info for platform:eisa.0
[ 35.897307] EISA: Probing bus 0 at eisa.0
[ 35.897332] Cannot allocate resource for EISA slot 4
[ 35.897335] Cannot allocate resource for EISA slot 5
[ 35.897349] EISA: Detected 0 cards.
[ 35.897496] TCP cubic registered
[ 35.897509] NET: Registered protocol family 1
[ 35.897546] Using IPI Shortcut mode
[ 35.897585] Magic number: 15:315:576
[ 35.897730] hash matches device ptyb8
[ 35.898644] Freeing unused kernel memory: 320k freed
[ 35.898728] PM: Adding info for No Bus:vcs1
[ 35.898850] PM: Adding info for No Bus:vcsa1
[ 35.899334] Time: tsc clocksource has been installed.
[ 35.924331] input: AT Translated Set 2 keyboard as /class/input/input1
[ 36.087727] PM: Adding info for No Bus:vcs2
[ 36.087840] PM: Adding info for No Bus:vcsa2
[ 36.088626] PM: Removing info for No Bus:vcs2
[ 36.088734] PM: Removing info for No Bus:vcsa2
[ 36.091902] PM: Adding info for No Bus:vcs2
[ 36.092024] PM: Adding info for No Bus:vcsa2
[ 36.096964] PM: Removing info for No Bus:vcs2
[ 36.097106] PM: Removing info for No Bus:vcsa2
[ 36.099533] PM: Adding info for No Bus:vcs2
[ 36.099635] PM: Adding info for No Bus:vcsa2
[ 36.101399] PM: Removing info for No Bus:vcs2
[ 36.101512] PM: Removing info for No Bus:vcsa2
[ 36.103146] PM: Adding info for No Bus:vcs3
[ 36.103250] PM: Adding info for No Bus:vcsa3
[ 36.104072] PM: Removing info for No Bus:vcs3
[ 36.104182] PM: Removing info for No Bus:vcsa3
[ 36.107380] PM: Adding info for No Bus:vcs3
[ 36.107502] PM: Adding info for No Bus:vcsa3
[ 36.112425] PM: Removing info for No Bus:vcs3
[ 36.112568] PM: Removing info for No Bus:vcsa3
[ 36.114853] PM: Adding info for No Bus:vcs3
[ 36.114953] PM: Adding info for No Bus:vcsa3
[ 36.116800] PM: Removing info for No Bus:vcs3
[ 36.116915] PM: Removing info for No Bus:vcsa3
[ 36.118410] PM: Adding info for No Bus:vcs4
[ 36.118519] PM: Adding info for No Bus:vcsa4
[ 36.119345] PM: Removing info for No Bus:vcs4
[ 36.119463] PM: Removing info for No Bus:vcsa4
[ 36.122588] PM: Adding info for No Bus:vcs4
[ 36.122716] PM: Adding info for No Bus:vcsa4
[ 36.127657] PM: Removing info for No Bus:vcs4
[ 36.127802] PM: Removing info for No Bus:vcsa4
[ 36.130072] PM: Adding info for No Bus:vcs4
[ 36.130175] PM: Adding info for No Bus:vcsa4
[ 36.132009] PM: Removing info for No Bus:vcs4
[ 36.132126] PM: Removing info for No Bus:vcsa4
[ 36.133645] PM: Adding info for No Bus:vcs5
[ 36.133756] PM: Adding info for No Bus:vcsa5
[ 36.134562] PM: Removing info for No Bus:vcs5
[ 36.134675] PM: Removing info for No Bus:vcsa5
[ 36.137954] PM: Adding info for No Bus:vcs5
[ 36.138084] PM: Adding info for No Bus:vcsa5
[ 36.143076] PM: Removing info for No Bus:vcs5
[ 36.143209] PM: Removing info for No Bus:vcsa5
[ 36.145553] PM: Adding info for No Bus:vcs5
[ 36.145655] PM: Adding info for No Bus:vcsa5
[ 36.147448] PM: Removing info for No Bus:vcs5
[ 36.147562] PM: Removing info for No Bus:vcsa5
[ 36.149078] PM: Adding info for No Bus:vcs6
[ 36.149184] PM: Adding info for No Bus:vcsa6
[ 36.149992] PM: Removing info for No Bus:vcs6
[ 36.150109] PM: Removing info for No Bus:vcsa6
[ 36.153289] PM: Adding info for No Bus:vcs6
[ 36.153422] PM: Adding info for No Bus:vcsa6
[ 36.158458] PM: Removing info for No Bus:vcs6
[ 36.158608] PM: Removing info for No Bus:vcsa6
[ 36.160957] PM: Adding info for No Bus:vcs6
[ 36.161058] PM: Adding info for No Bus:vcsa6
[ 36.162880] PM: Removing info for No Bus:vcs6
[ 36.163055] PM: Removing info for No Bus:vcsa6
[ 36.270614] PM: Adding info for No Bus:vcs8
[ 36.270749] PM: Adding info for No Bus:vcsa8
[ 37.446557] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 38.460026] SCSI subsystem initialized
[ 38.470590] libata version 2.00 loaded.
[ 38.476976] ICH2: IDE controller at PCI slot 0000:00:1f.1
[ 38.477006] ICH2: chipset revision 18
[ 38.477009] ICH2: not 100% native mode: will probe irqs later
[ 38.477025] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[ 38.477044] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[ 38.477057] Probing IDE interface ide0...
[ 38.533389] Linux Tulip driver version 1.1.14 (May 11, 2002)
[ 38.618181] usbcore: registered new interface driver usbfs
[ 38.618218] usbcore: registered new interface driver hub
[ 38.618255] usbcore: registered new device driver usb
[ 38.620900] USB Universal Host Controller Interface driver v3.0
[ 38.797317] Floppy drive(s): fd0 is 1.44M
[ 38.867714] FDC 0 is a post-1991 82077
[ 38.881729] PM: Adding info for platform:floppy.0
[ 39.242497] hda: Hewlett-Packard DVD Writer 200, ATAPI CD/DVD-ROM drive
[ 39.242551] PM: Adding info for No Bus:ide0
[ 39.578059] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 39.578107] PM: Adding info for ide:0.0
[ 39.578447] Probing IDE interface ide1...
[ 40.145204] PDC20269: IDE controller at PCI slot 0000:02:01.0
[ 40.145244] PDC20269: chipset revision 2
[ 40.145249] PDC20269: ROM enabled at 0x30020000
[ 40.155202] PDC20269: PLL input clock is 16566 kHz
[ 40.184954] PDC20269: 100% native mode on irq 21
[ 40.184964] ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
[ 40.185026] ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
[ 40.185040] Probing IDE interface ide2...
[ 40.214123] hda: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 40.214139] Uniform CD-ROM driver Revision: 3.20
[ 40.472759] hde: SAMSUNG SP1203N, ATA DISK drive
[ 40.472818] PM: Adding info for No Bus:ide2
[ 40.752337] hdf: Maxtor 6Y160P0, ATA DISK drive
[ 40.808410] ide2 at 0xa000-0xa007,0xa402 on irq 21
[ 40.808454] PM: Adding info for ide:2.0
[ 40.808825] PM: Adding info for ide:2.1
[ 40.809042] Probing IDE interface ide3...
[ 41.487240] hdh: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
[ 41.542922] PM: Adding info for No Bus:ide3
[ 41.543198] ide3 at 0xa800-0xa807,0xac02 on irq 21
[ 41.543222] PM: Adding info for ide:3.1
[ 41.545950] hdh: ATAPI 52X CD-ROM drive, 192kB Cache
[ 41.551393] tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
[ 41.558768] eth0: ADMtek Comet rev 17 at Port 0xb400, 00:04:5A:8A:55:7B, IRQ 21.
[ 41.569846] hde: max request size: 512KiB
[ 41.577309] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 41.577318] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 41.577923] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 41.577969] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000
[ 41.578067] PM: Adding info for usb:usb1
[ 41.578512] PM: Adding info for No Bus:usbdev1.1_ep00
[ 41.579228] usb usb1: configuration #1 chosen from 1 choice
[ 41.579272] PM: Adding info for usb:1-0:1.0
[ 41.579672] hub 1-0:1.0: USB hub found
[ 41.579702] hub 1-0:1.0: 2 ports detected
[ 41.602662] hde: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 41.603472] hde: cache flushes supported
[ 41.603555] hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 >
[ 41.647509] hdf: max request size: 512KiB
[ 41.648068] hdf: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
[ 41.648229] hdf: cache flushes supported
[ 41.648281] hdf: hdf1 hdf2 hdf3 < hdf5<7>PM: Adding info for No Bus:usbdev1.1_ep81
[ 41.682922] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 41.682929] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 41.682963] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 41.682999] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d800
[ 41.683076] PM: Adding info for usb:usb2
[ 41.683132] PM: Adding info for No Bus:usbdev2.1_ep00
[ 41.683152] usb usb2: configuration #1 chosen from 1 choice
[ 41.683167] PM: Adding info for usb:2-0:1.0
[ 41.683192] hub 2-0:1.0: USB hub found
[ 41.683208] hub 2-0:1.0: 2 ports detected
[ 41.686387] hdf6 >
[ 41.786652] PM: Adding info for No Bus:usbdev2.1_ep81
[ 42.261163] Attempting manual resume
[ 42.261169] swsusp: Resume From Partition 33:6
[ 42.261172] PM: Checking swsusp image.
[ 42.344495] PM: Resume from disk failed.
[ 42.381801] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 42.381808] EXT3-fs: write access will be enabled during recovery.
[ 44.859742] kjournald starting. Commit interval 5 seconds
[ 44.859779] EXT3-fs: recovery complete.
[ 44.863854] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.975047] PM: Adding info for No Bus:vcs2
[ 48.975086] PM: Adding info for No Bus:vcsa2
[ 48.977102] PM: Removing info for No Bus:vcs2
[ 48.977150] PM: Removing info for No Bus:vcsa2
[ 48.977398] PM: Adding info for No Bus:vcs3
[ 48.977418] PM: Adding info for No Bus:vcsa3
[ 48.979316] PM: Removing info for No Bus:vcs3
[ 48.979361] PM: Removing info for No Bus:vcsa3
[ 48.979609] PM: Adding info for No Bus:vcs4
[ 48.979632] PM: Adding info for No Bus:vcsa4
[ 48.981559] PM: Removing info for No Bus:vcs4
[ 48.981607] PM: Removing info for No Bus:vcsa4
[ 48.981856] PM: Adding info for No Bus:vcs5
[ 48.981880] PM: Adding info for No Bus:vcsa5
[ 48.983810] PM: Removing info for No Bus:vcs5
[ 48.983857] PM: Removing info for No Bus:vcsa5
[ 48.984103] PM: Adding info for No Bus:vcs6
[ 48.984124] PM: Adding info for No Bus:vcsa6
[ 48.986028] PM: Removing info for No Bus:vcs6
[ 48.986074] PM: Removing info for No Bus:vcsa6
[ 51.482357] NET: Registered protocol family 10
[ 51.482503] lo: Disabled Privacy Extensions
[ 52.714832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.771408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 53.275241] 0000:02:05.0: tulip_stop_rxtx() failed
[ 53.275257] eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
[ 53.581713] iTCO_vendor_support: vendor-support=0
[ 53.864415] Linux agpgart interface v0.101 (c) Dave Jones
[ 53.880894] agpgart: Detected an Intel i845 Chipset.
[ 53.884796] PM: Adding info for No Bus:agpgart
[ 53.884896] agpgart: AGP aperture is 64M @ 0xe8000000
[ 53.893710] input: PC Speaker as /class/input/input2
[ 53.910034] PM: Adding info for No Bus:rtc
[ 53.910095] Real Time Clock Driver v1.12ac
[ 54.020946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 54.176360] parport: PnPBIOS parport detected.
[ 54.176428] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 54.232960] PM: Adding info for No Bus:timer
[ 54.284534] PM: Adding info for No Bus:seq
[ 54.385986] PM: Adding info for No Bus:sequencer
[ 54.386032] PM: Adding info for No Bus:sequencer2
[ 54.785276] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 54.789131] PM: Adding info for platform:iTCO_wdt
[ 54.789273] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 54.789284] iTCO_wdt: No card detected
[ 54.789421] PM: Adding info for No Bus:midiC1D0
[ 54.789481] PM: Adding info for No Bus:midi1
[ 54.789516] PM: Adding info for No Bus:dmmidi1
[ 54.789592] PM: Adding info for No Bus:controlC1
[ 54.789643] PM: Adding info for No Bus:mixer1
[ 54.866148] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 55.178542] intel8x0_measure_ac97_clock: measured 54936 usecs
[ 55.178549] intel8x0: clocking to 48000
[ 55.178615] PM: Adding info for No Bus:pcmC0D1c
[ 55.178732] PM: Adding info for No Bus:adsp
[ 55.178790] PM: Adding info for No Bus:pcmC0D0p
[ 55.178836] PM: Adding info for No Bus:pcmC0D0c
[ 55.178880] PM: Adding info for No Bus:dsp
[ 55.178919] PM: Adding info for No Bus:audio
[ 55.178962] PM: Adding info for ac97:0-0:ALC200,200P
[ 55.179019] PM: Adding info for No Bus:controlC0
[ 55.179079] PM: Adding info for No Bus:mixer
[ 55.672408] fuse init (API version 7.8)
[ 55.672501] PM: Adding info for No Bus:fuse
[ 55.708243] lp0: using parport0 (interrupt-driven).
[ 55.766054] PM: Adding info for No Bus:i2c-0
[ 55.817585] PM: Adding info for i2c:0-0050
[ 55.833543] PM: Adding info for i2c:0-0051
[ 55.906939] PM: Adding info for No Bus:i2c-9191
[ 55.944607] it87: Found IT8712F chip at 0x290, revision 4
[ 55.947116] PM: Adding info for i2c:9191-0290
[ 55.949574] it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
[ 56.017081] Adding 1044184k swap on /dev/disk/by-uuid/5c6a2d8c-54c1-44cb-8f1b-4a159373a120. Priority:-1 extents:1 across:1044184k
[ 56.280711] EXT3 FS on hde7, internal journal
[ 62.311827] eth0: no IPv6 routers present
[ 65.729710] kjournald starting. Commit interval 5 seconds
[ 65.729842] EXT3 FS on hde1, internal journal
[ 65.729849] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.769084] kjournald starting. Commit interval 5 seconds
[ 65.769242] EXT3 FS on hde3, internal journal
[ 65.769250] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.808540] kjournald starting. Commit interval 5 seconds
[ 65.808811] EXT3 FS on hdf5, internal journal
[ 65.808818] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.877452] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 65.974065] NTFS volume version 3.1.
[ 66.124483] kjournald starting. Commit interval 5 seconds
[ 66.124719] EXT3 FS on hdf6, internal journal
[ 66.124727] EXT3-fs: mounted filesystem with ordered data mode.
[ 66.165702] kjournald starting. Commit interval 5 seconds
[ 66.165831] EXT3 FS on hde5, internal journal
[ 66.165837] EXT3-fs: mounted filesystem with ordered data mode.
[ 66.196714] kjournald starting. Commit interval 5 seconds
[ 66.196843] EXT3 FS on hde2, internal journal
[ 66.196851] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.089850] NET: Registered protocol family 17
[ 72.304345] PM: Adding info for No Bus:vcs2
[ 72.307348] PM: Adding info for No Bus:vcsa2
[ 72.310387] PM: Removing info for No Bus:vcs2
[ 72.312963] PM: Removing info for No Bus:vcsa2
[ 72.315635] PM: Adding info for No Bus:vcs3
[ 72.318599] PM: Adding info for No Bus:vcsa3
[ 72.321622] PM: Removing info for No Bus:vcs3
[ 72.324168] PM: Removing info for No Bus:vcsa3
[ 72.326887] PM: Adding info for No Bus:vcs4
[ 72.329810] PM: Adding info for No Bus:vcsa4
[ 72.332825] PM: Removing info for No Bus:vcs4
[ 72.335426] PM: Removing info for No Bus:vcsa4
[ 72.338122] PM: Adding info for No Bus:vcs5
[ 72.341104] PM: Adding info for No Bus:vcsa5
[ 72.344132] PM: Removing info for No Bus:vcs5
[ 72.346683] PM: Removing info for No Bus:vcsa5
[ 72.349395] PM: Adding info for No Bus:vcs6
[ 72.352303] PM: Adding info for No Bus:vcsa6
[ 72.355335] PM: Removing info for No Bus:vcs6
[ 72.357934] PM: Removing info for No Bus:vcsa6
[ 72.397076] PM: Adding info for No Bus:vcs2
[ 72.400040] PM: Adding info for No Bus:vcsa2
[ 72.404450] PM: Removing info for No Bus:vcs2
[ 72.407090] PM: Removing info for No Bus:vcsa2
[ 72.413661] PM: Adding info for No Bus:vcs3
[ 72.416627] PM: Adding info for No Bus:vcsa3
[ 72.421142] PM: Removing info for No Bus:vcs3
[ 72.423755] PM: Removing info for No Bus:vcsa3
[ 72.430312] PM: Adding info for No Bus:vcs4
[ 72.433314] PM: Adding info for No Bus:vcsa4
[ 72.437782] PM: Removing info for No Bus:vcs4
[ 72.440404] PM: Removing info for No Bus:vcsa4
[ 72.446845] PM: Adding info for No Bus:vcs5
[ 72.449849] PM: Adding info for No Bus:vcsa5
[ 72.454297] PM: Removing info for No Bus:vcs5
[ 72.456934] PM: Removing info for No Bus:vcsa5
[ 72.463476] PM: Adding info for No Bus:vcs6
[ 72.466479] PM: Adding info for No Bus:vcsa6
[ 72.470933] PM: Removing info for No Bus:vcs6
[ 72.473592] PM: Removing info for No Bus:vcsa6
[ 72.802517] PM: Adding info for No Bus:vcs4
[ 72.803314] PM: Adding info for No Bus:vcsa4
[ 72.805646] PM: Adding info for No Bus:vcs5
[ 72.806473] PM: Adding info for No Bus:vcsa5
[ 72.818905] PM: Adding info for No Bus:vcs2
[ 72.819699] PM: Adding info for No Bus:vcsa2
[ 72.826180] PM: Adding info for No Bus:vcs3
[ 72.826978] PM: Adding info for No Bus:vcsa3
[ 72.881210] PM: Adding info for No Bus:vcs6
[ 72.884267] PM: Adding info for No Bus:vcsa6
[ 77.668958] Capability LSM initialized
[ 78.037514] PM: Adding info for No Bus:parport0
[ 78.042428] ppdev: user-space parallel port driver
[ 80.402125] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 80.402725] PM: Adding info for No Bus:apm_bios
[ 83.657777] PM: Adding info for No Bus:vcs7
[ 83.662289] PM: Adding info for No Bus:vcsa7
[ 84.081403] [drm] Initialized drm 1.1.0 20060810
[ 84.127383] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 85.727417] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 85.727679] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 85.727700] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 86.026077] [drm] Setting GART location based on new memory map
[ 86.026147] [drm] writeback test succeeded in 1 usecs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 10:07 ` YUP
@ 2007-03-18 15:10 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:22 ` YUP
2007-03-19 12:10 ` Sergei Shtylyov
0 siblings, 2 replies; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-18 15:10 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
Hi,
On Sunday 18 March 2007, YUP wrote:
> Please ignore previous message, I sent wrong file. Here is right dmesg
> output with disabled ata_piix.
[ 40.145204] PDC20269: IDE controller at PCI slot 0000:02:01.0
[ 40.145244] PDC20269: chipset revision 2
[ 40.145249] PDC20269: ROM enabled at 0x30020000
[ 40.155202] PDC20269: PLL input clock is 16566 kHz
[ 40.184954] PDC20269: 100% native mode on irq 21
[ 40.184964] ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
[ 40.185026] ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
[ 40.185040] Probing IDE interface ide2...
[ 40.214123] hda: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 40.214139] Uniform CD-ROM driver Revision: 3.20
[ 40.472759] hde: SAMSUNG SP1203N, ATA DISK drive
[ 40.472818] PM: Adding info for No Bus:ide2
[ 40.752337] hdf: Maxtor 6Y160P0, ATA DISK drive
[ 40.808410] ide2 at 0xa000-0xa007,0xa402 on irq 21
[ 40.808454] PM: Adding info for ide:2.0
[ 40.808825] PM: Adding info for ide:2.1
[ 40.809042] Probing IDE interface ide3...
[ 41.487240] hdh: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
[ 41.542922] PM: Adding info for No Bus:ide3
[ 41.543198] ide3 at 0xa800-0xa807,0xac02 on irq 21
[ 41.543222] PM: Adding info for ide:3.1
[ 41.545950] hdh: ATAPI 52X CD-ROM drive, 192kB Cache
Thanks, does reading from CD/DVD media also work fine now?
It seems that the drive works just fine in PIO mode with pdc202xx_new
IDE driver (it doesn't support ATAPI DMA at the moment) and fails
with pata_pdc2027x libata (even with DMA blacklist patch from Albert).
Thanks,
Bart
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 15:10 ` Bartlomiej Zolnierkiewicz
@ 2007-03-18 15:22 ` YUP
2007-03-18 15:54 ` Bartlomiej Zolnierkiewicz
2007-03-19 12:10 ` Sergei Shtylyov
1 sibling, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-18 15:22 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
Hello Bartek,
>
> Thanks, does reading from CD/DVD media also work fine now?
Yes, drives can read all media cd and dvd I have.
> It seems that the drive works just fine in PIO mode with pdc202xx_new
> IDE driver (it doesn't support ATAPI DMA at the moment) and fails
> with pata_pdc2027x libata (even with DMA blacklist patch from Albert).
Does it mean that I have to recompile all the time kernels from ubuntu
repositories? Is there any possibility to blacklist pata_pdc2027x
module and enable pdc202xx_new (just to compile one and add to the list
of modules) ?
Wishes,
Yarema
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 15:54 ` Bartlomiej Zolnierkiewicz
@ 2007-03-18 15:49 ` YUP
2007-03-18 22:48 ` YUP
2007-03-19 3:31 ` Albert Lee
2 siblings, 0 replies; 47+ messages in thread
From: YUP @ 2007-03-18 15:49 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
I'll do it for sure!!!
Thanks for help again!
Yarema
> You may also want to bring up this problem with Ubuntu developers.
>
> Bart
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 15:22 ` YUP
@ 2007-03-18 15:54 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:49 ` YUP
` (2 more replies)
0 siblings, 3 replies; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-18 15:54 UTC (permalink / raw)
To: YUP; +Cc: albertl, linux-ide
On Sunday 18 March 2007, YUP wrote:
> Hello Bartek,
>
> >
> > Thanks, does reading from CD/DVD media also work fine now?
>
> Yes, drives can read all media cd and dvd I have.
OK, thanks for testing.
The conclusion here is that the problem experienced by Yarema
is clearly some libata regression wrt drivers/ide.
> > It seems that the drive works just fine in PIO mode with pdc202xx_new
> > IDE driver (it doesn't support ATAPI DMA at the moment) and fails
> > with pata_pdc2027x libata (even with DMA blacklist patch from Albert).
>
> Does it mean that I have to recompile all the time kernels from ubuntu
> repositories? Is there any possibility to blacklist pata_pdc2027x
> module and enable pdc202xx_new (just to compile one and add to the list
> of modules) ?
Adding "blacklist pata_pdc2027xx" line to /etc/modprobe.conf should do this.
You may also want to bring up this problem with Ubuntu developers.
Bart
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 15:54 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:49 ` YUP
@ 2007-03-18 22:48 ` YUP
2007-03-19 3:31 ` Albert Lee
2 siblings, 0 replies; 47+ messages in thread
From: YUP @ 2007-03-18 22:48 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: albertl, linux-ide
Just for info: k3b said that cannot add /dev/hdh (Aopen cdrom) to the
list of known devices for reading.
Yarema
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 15:54 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:49 ` YUP
2007-03-18 22:48 ` YUP
@ 2007-03-19 3:31 ` Albert Lee
2007-03-19 8:22 ` YUP
2 siblings, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-19 3:31 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: YUP, albertl, linux-ide
Bartlomiej Zolnierkiewicz wrote:
> On Sunday 18 March 2007, YUP wrote:
>
>>Hello Bartek,
>>
>> >
>> > Thanks, does reading from CD/DVD media also work fine now?
>>
>>Yes, drives can read all media cd and dvd I have.
>
>
> OK, thanks for testing.
>
> The conclusion here is that the problem experienced by Yarema
> is clearly some libata regression wrt drivers/ide.
>
Hi Bart,
Agreed. Given both IDE and windows can read the AOpen drive without problem,
this clearly is libata regression.
I will try to find out the root cause of this libata regression.
Currently I suspect one of the INQUIRY commands sent by sr.c caused trouble:
[ 62.013082] ata2.01: qc timeout (cmd 0xa0)
[ 62.013098] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 62.013160] ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
[ 62.013163] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
[ 69.002638] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 91.984233] ata2: port failed to respond (30 secs, Status 0xd8)
[ 91.984292] ata2: soft resetting port
[ 92.151391] ATA: abnormal status 0x7F on port 0xE08515DF
[ 92.162767] ATA: abnormal status 0x7F on port 0xE08515DF
>
>>>It seems that the drive works just fine in PIO mode with pdc202xx_new
>>>IDE driver (it doesn't support ATAPI DMA at the moment) and fails
>>>with pata_pdc2027x libata (even with DMA blacklist patch from Albert).
>>
>>Does it mean that I have to recompile all the time kernels from ubuntu
>>repositories? Is there any possibility to blacklist pata_pdc2027x
>>module and enable pdc202xx_new (just to compile one and add to the list
>>of modules) ?
>
>
> Adding "blacklist pata_pdc2027xx" line to /etc/modprobe.conf should do this.
> You may also want to bring up this problem with Ubuntu developers.
>
Hi Yurema,
Before doing "blacklist pata_pdc2027xx" and happily use all your drives with
the IDE driver, could you please hold a moment and help me to find out the
root cause of the libata + pata_pdc2027xx + AOpen 56X/AKH problem?
If ok, could you please:
1. Keep the HP drive connected to the on-board Intel controller, the primary port.
(Don't use the on-board secondary port.)
Keep the hard drives connected to where they are.
Make sure the AOpen drive is connected to the Promise adapter.
2. Reconfigure the kernel.
Remove the IDE pdc202xx_new and add the libata pata_pdc2027x driver for debugging.
3. Apply the attached patch to the kernel (2.6.20.3) to gather more debugging info.
Rebuild/reboot the kernel. Something like below should be logged:
"ata2: protocol 6 task_state 4
ata2: protocol 6 task_state 4 (dev_stat 0x58)
ata2: protocol 6 task_state 2
ata2: protocol 6 task_state 2 (dev_stat 0x51)
ata2.01: qc timeout (cmd 0xa0)
ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x12 data 254 in
res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask 0x5 (timeout)"
4. Collect the full dmesg with the first "qc timeout".
--
Thanks for your patience,
Albert
diff -Nrup linux-2.6.20.3/drivers/ata/libata-core.c linux-2.6.20.3-debug/drivers/ata/libata-core.c
--- linux-2.6.20.3/drivers/ata/libata-core.c 2007-03-14 02:27:08.000000000 +0800
+++ linux-2.6.20.3-debug/drivers/ata/libata-core.c 2007-03-19 11:20:33.000000000 +0800
@@ -3296,6 +3296,7 @@ static const struct ata_blacklist_entry
{ "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA },
{ "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
{ "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA },
+ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_NODMA },
{ "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA },
{ "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA },
{ "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA },
@@ -3303,6 +3304,7 @@ static const struct ata_blacklist_entry
{ "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA },
{ "CD-532E-A", NULL, ATA_HORKAGE_NODMA },
{ "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA },
+ { "CD-ROM 56X/AKH", NULL, ATA_HORKAGE_NODMA },
{ "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA },
{ "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
@@ -4371,8 +4373,9 @@ int ata_hsm_move(struct ata_port *ap, st
WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
fsm_start:
- DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+ if ((ap->id == 2) || (ap->id == 4))
+ printk(KERN_ERR "ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state, status);
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -5091,8 +5094,14 @@ inline unsigned int ata_host_intr (struc
struct ata_eh_info *ehi = &ap->eh_info;
u8 status, host_stat = 0;
- VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state);
+ if ((ap->id == 2) || (ap->id == 4)) {
+ printk(KERN_ERR "ata%u: protocol %d task_state %d\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state);
+
+ host_stat = ap->ops->bmdma_status(ap);
+ printk(KERN_ERR "ata%u: host_stat 0x%X\n", ap->id, host_stat);
+
+ }
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
diff -Nrup linux-2.6.20.3/drivers/ata/libata-scsi.c linux-2.6.20.3-debug/drivers/ata/libata-scsi.c
--- linux-2.6.20.3/drivers/ata/libata-scsi.c 2007-03-14 02:27:08.000000000 +0800
+++ linux-2.6.20.3-debug/drivers/ata/libata-scsi.c 2007-03-19 11:20:56.000000000 +0800
@@ -2729,17 +2729,17 @@ static inline ata_xlat_func_t ata_get_xl
static inline void ata_scsi_dump_cdb(struct ata_port *ap,
struct scsi_cmnd *cmd)
{
-#ifdef ATA_DEBUG
struct scsi_device *scsidev = cmd->device;
u8 *scsicmd = cmd->cmnd;
- DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
- ap->id,
- scsidev->channel, scsidev->id, scsidev->lun,
- scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
- scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
- scsicmd[8]);
-#endif
+ if ((ap->id == 2) || (ap->id == 4)) {
+ printk(KERN_ERR "CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ ap->id,
+ scsidev->channel, scsidev->id, scsidev->lun,
+ scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
+ scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
+ scsicmd[8]);
+ }
}
static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 3:31 ` Albert Lee
@ 2007-03-19 8:22 ` YUP
2007-03-19 8:29 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-19 8:22 UTC (permalink / raw)
To: albertl; +Cc: Bartlomiej Zolnierkiewicz, linux-ide
What about ata_piix, have I enable this?
>
> 2. Reconfigure the kernel.
> Remove the IDE pdc202xx_new and add the libata pata_pdc2027x driver for debugging.
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 8:22 ` YUP
@ 2007-03-19 8:29 ` Albert Lee
0 siblings, 0 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-19 8:29 UTC (permalink / raw)
To: YUP; +Cc: albertl, Bartlomiej Zolnierkiewicz, linux-ide
YUP wrote:
> What about ata_piix, have I enable this?
>
It's ok to use either IDE (piix) or libata (ata_piix) to drive the HP drive.
We don't need the log of the HP drive since it seems to work ok.
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-18 15:10 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:22 ` YUP
@ 2007-03-19 12:10 ` Sergei Shtylyov
2007-03-19 19:35 ` YUP
` (2 more replies)
1 sibling, 3 replies; 47+ messages in thread
From: Sergei Shtylyov @ 2007-03-19 12:10 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: YUP, albertl, linux-ide
Hello.
Bartlomiej Zolnierkiewicz wrote:
> It seems that the drive works just fine in PIO mode with pdc202xx_new
> IDE driver (it doesn't support ATAPI DMA at the moment)
There used to be Albert's patch enabling ATAPIT DMA in this driver:
http://marc.info/?l=linux-ide&m=111027913608663
Oh my, that was 2 years ago, and all slipped thru the cracks... :-)
> Thanks,
> Bart
MBR, Sergei
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 12:10 ` Sergei Shtylyov
@ 2007-03-19 19:35 ` YUP
2007-03-20 7:27 ` Albert Lee
2007-03-21 4:52 ` Albert Lee
2007-03-19 23:02 ` YUP
2007-03-23 22:13 ` Bartlomiej Zolnierkiewicz
2 siblings, 2 replies; 47+ messages in thread
From: YUP @ 2007-03-19 19:35 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: Bartlomiej Zolnierkiewicz, albertl, linux-ide
Hi Sergei, Albert and Bartek,
Thanks for the patch. If you dealt with it, could you please apply this
patch to 2.6.20.3 kernel and send me diff? I'm just afraid that I
couldn't do it right.
Albert and Bartek,
please find latest dmsg output with Albert's patch. I quoted here only
output after the first "qc timeout" as Albert requested (see below).
Hope it will help you.
Regards,
Yarema
[ 69.646046] ata4.01: qc timeout (cmd 0xa0)
[ 69.646063] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 69.646077] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 69.646080] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 76.635584] ata4: port is slow to respond, please be patient (Status
0xd8)
[ 99.617183] ata4: port failed to respond (30 secs, Status 0xd8)
[ 99.617196] ata4: soft resetting port
[ 99.784327] ATA: abnormal status 0x7F on port 0xE08815DF
[ 99.795702] ATA: abnormal status 0x7F on port 0xE08815DF
[ 99.956680] ata4: protocol 2 task_state 1 (dev_stat 0x51)
[ 99.956691] ata4: protocol 2 task_state 3 (dev_stat 0x51)
[ 99.956724] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 99.956728] ata4.01: revalidation failed (errno=-5)
[ 99.956735] ata4: failed to recover some devices, retrying in 5 secs
[ 104.953222] ata4: soft resetting port
[ 105.120375] ATA: abnormal status 0x7F on port 0xE08815DF
[ 105.131749] ATA: abnormal status 0x7F on port 0xE08815DF
[ 105.292697] ata4: protocol 2 task_state 1 (dev_stat 0x58)
[ 105.292960] ata4: protocol 2 task_state 2 (dev_stat 0x50)
[ 105.293007] ata4.01: device is on DMA blacklist, disabling DMA
[ 105.293139] ata4: protocol 1 task_state 2
[ 105.293143] ata4: host_stat 0x4
[ 105.293148] ata4: protocol 1 task_state 2 (dev_stat 0x50)
[ 105.456453] ata4: protocol 2 task_state 1 (dev_stat 0x58)
[ 105.456739] ata4: protocol 2 task_state 2 (dev_stat 0x50)
[ 105.456780] ata4.01: configured for PIO4
[ 105.456830] ata4: EH complete
[ 105.456944] CDB (4:0,1,0) 00 00 00 00 00 00 00 00 00
[ 105.457003] ata4: protocol 6 task_state 4 (dev_stat 0x58)
[ 105.457551] ata4: protocol 6 task_state 2
[ 105.457555] ata4: host_stat 0x4
[ 105.457561] ata4: protocol 6 task_state 2 (dev_stat 0x51)
[ 105.457563] ata4: protocol 6 task_state 3 (dev_stat 0x51)
[ 105.457647] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.458233] ata4: protocol 5 task_state 1
[ 105.458237] ata4: host_stat 0x4
[ 105.458242] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.458350] ata4: protocol 5 task_state 1
[ 105.458353] ata4: host_stat 0x4
[ 105.458358] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.458361] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.458410] CDB (4:0,1,0) 43 00 00 00 00 00 00 00 0c
[ 105.458465] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.458914] ata4: protocol 5 task_state 1
[ 105.458918] ata4: host_stat 0x4
[ 105.458923] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.458926] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.458929] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.459005] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.459599] ata4: protocol 5 task_state 1
[ 105.459603] ata4: host_stat 0x4
[ 105.459608] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.459715] ata4: protocol 5 task_state 1
[ 105.459718] ata4: host_stat 0x4
[ 105.459724] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.459726] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.459757] CDB (4:0,1,0) 43 00 00 00 00 00 00 00 0c
[ 105.459811] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.460279] ata4: protocol 5 task_state 1
[ 105.460283] ata4: host_stat 0x4
[ 105.460288] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.460291] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.460294] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.460370] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.460965] ata4: protocol 5 task_state 1
[ 105.460969] ata4: host_stat 0x4
[ 105.460974] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.461081] ata4: protocol 5 task_state 1
[ 105.461084] ata4: host_stat 0x4
[ 105.461089] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.461092] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.461127] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 105.461182] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.461645] ata4: protocol 5 task_state 1
[ 105.461649] ata4: host_stat 0x4
[ 105.461654] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.461657] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.461660] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.461737] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.462330] ata4: protocol 5 task_state 1
[ 105.462333] ata4: host_stat 0x4
[ 105.462339] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.462446] ata4: protocol 5 task_state 1
[ 105.462449] ata4: host_stat 0x4
[ 105.462454] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.462457] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.462485] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 105.462539] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.463010] ata4: protocol 5 task_state 1
[ 105.463014] ata4: host_stat 0x4
[ 105.463019] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.463022] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.463025] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.463101] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.463695] ata4: protocol 5 task_state 1
[ 105.463699] ata4: host_stat 0x4
[ 105.463704] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.463812] ata4: protocol 5 task_state 1
[ 105.463815] ata4: host_stat 0x4
[ 105.463820] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.463823] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.463850] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 105.463905] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.464376] ata4: protocol 5 task_state 1
[ 105.464380] ata4: host_stat 0x4
[ 105.464385] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.464388] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.464391] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.464475] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.465104] ata4: protocol 5 task_state 1
[ 105.465108] ata4: host_stat 0x4
[ 105.465113] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.465219] ata4: protocol 5 task_state 1
[ 105.465222] ata4: host_stat 0x4
[ 105.465228] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.465231] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.465543] CDB (4:0,1,0) 1e 00 00 00 00 00 00 00 00
[ 105.465609] ata4: protocol 6 task_state 4 (dev_stat 0x58)
[ 105.466245] ata4: protocol 6 task_state 2
[ 105.466250] ata4: host_stat 0x4
[ 105.466257] ata4: protocol 6 task_state 2 (dev_stat 0x50)
[ 105.471684] CDB (4:0,1,0) 00 00 00 00 00 00 00 00 00
[ 105.471762] ata4: protocol 6 task_state 4 (dev_stat 0x58)
[ 105.472290] ata4: protocol 6 task_state 2
[ 105.472294] ata4: host_stat 0x4
[ 105.472300] ata4: protocol 6 task_state 2 (dev_stat 0x51)
[ 105.472303] ata4: protocol 6 task_state 3 (dev_stat 0x51)
[ 105.472398] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.472971] ata4: protocol 5 task_state 1
[ 105.472974] ata4: host_stat 0x4
[ 105.472980] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.473087] ata4: protocol 5 task_state 1
[ 105.473090] ata4: host_stat 0x4
[ 105.473095] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.473098] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.473160] CDB (4:0,1,0) 43 00 00 00 00 00 00 00 0c
[ 105.473215] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.473651] ata4: protocol 5 task_state 1
[ 105.473655] ata4: host_stat 0x4
[ 105.473660] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.473663] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.473666] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.473743] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.474371] ata4: protocol 5 task_state 1
[ 105.474374] ata4: host_stat 0x4
[ 105.474380] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.474488] ata4: protocol 5 task_state 1
[ 105.474491] ata4: host_stat 0x4
[ 105.474496] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.474499] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.474530] CDB (4:0,1,0) 43 00 00 00 00 00 00 00 0c
[ 105.474585] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.475052] ata4: protocol 5 task_state 1
[ 105.475056] ata4: host_stat 0x4
[ 105.475061] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.475064] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.475067] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.475143] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.475737] ata4: protocol 5 task_state 1
[ 105.475741] ata4: host_stat 0x4
[ 105.475746] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.475853] ata4: protocol 5 task_state 1
[ 105.475856] ata4: host_stat 0x4
[ 105.475861] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.475864] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.475893] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 105.475948] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.476418] ata4: protocol 5 task_state 1
[ 105.476422] ata4: host_stat 0x4
[ 105.476428] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.476431] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.476434] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.476514] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.477102] ata4: protocol 5 task_state 1
[ 105.477106] ata4: host_stat 0x4
[ 105.477111] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.477219] ata4: protocol 5 task_state 1
[ 105.477222] ata4: host_stat 0x4
[ 105.477227] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.477230] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.477260] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 105.477314] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.477783] ata4: protocol 5 task_state 1
[ 105.477787] ata4: host_stat 0x4
[ 105.477792] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.477795] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.477798] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.477874] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.478468] ata4: protocol 5 task_state 1
[ 105.478471] ata4: host_stat 0x4
[ 105.478477] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.478584] ata4: protocol 5 task_state 1
[ 105.478587] ata4: host_stat 0x4
[ 105.478592] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.478595] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.478623] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 105.478677] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.479148] ata4: protocol 5 task_state 1
[ 105.479152] ata4: host_stat 0x4
[ 105.479157] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.479160] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.479163] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.479239] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.479833] ata4: protocol 5 task_state 1
[ 105.479836] ata4: host_stat 0x4
[ 105.479842] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.479950] ata4: protocol 5 task_state 1
[ 105.479953] ata4: host_stat 0x4
[ 105.479958] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.479961] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 105.480046] CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00
[ 105.480101] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 105.480551] ata4: protocol 5 task_state 1
[ 105.480555] ata4: host_stat 0x4
[ 105.480561] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.480564] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.480567] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 105.480644] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 113.509692] ata4: protocol 5 task_state 1
[ 113.509703] ata4: host_stat 0x0
[ 113.510276] ata4: protocol 5 task_state 1
[ 113.510280] ata4: host_stat 0x0
[ 113.510890] ata4: protocol 5 task_state 1
[ 113.510894] ata4: host_stat 0x0
[ 113.512120] ata4: protocol 5 task_state 1
[ 113.512124] ata4: host_stat 0x0
[ 113.513615] ata4: protocol 5 task_state 1
[ 113.513618] ata4: host_stat 0x0
[ 113.514228] ata4: protocol 5 task_state 1
[ 113.514231] ata4: host_stat 0x0
[ 113.515461] ata4: protocol 5 task_state 1
[ 113.515464] ata4: host_stat 0x0
[ 113.516992] ata4: protocol 5 task_state 1
[ 113.516996] ata4: host_stat 0x0
[ 113.517601] ata4: protocol 5 task_state 1
[ 113.517604] ata4: host_stat 0x0
[ 113.518813] ata4: protocol 5 task_state 1
[ 113.518816] ata4: host_stat 0x0
[ 113.520297] ata4: protocol 5 task_state 1
[ 113.520301] ata4: host_stat 0x0
[ 113.520904] ata4: protocol 5 task_state 1
[ 113.520908] ata4: host_stat 0x0
[ 113.522131] ata4: protocol 5 task_state 1
[ 113.522134] ata4: host_stat 0x0
[ 119.374296] ata4: protocol 5 task_state 1
[ 119.374307] ata4: host_stat 0x0
[ 119.374421] ata4: protocol 5 task_state 1
[ 119.374425] ata4: host_stat 0x0
[ 123.791814] ata4: protocol 5 task_state 1
[ 123.791825] ata4: host_stat 0x0
[ 123.792374] ata4: protocol 5 task_state 1
[ 123.792377] ata4: host_stat 0x0
[ 126.226710] ata4: protocol 5 task_state 1
[ 126.226721] ata4: host_stat 0x0
[ 126.227294] ata4: protocol 5 task_state 1
[ 126.227298] ata4: host_stat 0x0
[ 126.320673] ata4: protocol 5 task_state 1
[ 126.320683] ata4: host_stat 0x0
[ 126.320794] ata4: protocol 5 task_state 1
[ 126.320798] ata4: host_stat 0x0
[ 126.974867] ata4: protocol 5 task_state 1
[ 126.974877] ata4: host_stat 0x0
[ 127.491048] ata4: protocol 5 task_state 1
[ 127.491059] ata4: host_stat 0x0
[ 127.491132] ata4: protocol 5 task_state 1
[ 127.491136] ata4: host_stat 0x0
[ 127.723773] ata4: protocol 5 task_state 1
[ 127.723783] ata4: host_stat 0x0
[ 128.885431] ata4: protocol 5 task_state 1
[ 128.885442] ata4: host_stat 0x0
[ 128.885546] ata4: protocol 5 task_state 1
[ 128.885549] ata4: host_stat 0x0
[ 130.469771] ata4: protocol 5 task_state 1
[ 130.469782] ata4: host_stat 0x0
[ 130.470361] ata4: protocol 5 task_state 1
[ 130.470364] ata4: host_stat 0x0
[ 131.218534] ata4: protocol 5 task_state 1
[ 131.218545] ata4: host_stat 0x0
[ 131.967403] ata4: protocol 5 task_state 1
[ 131.967414] ata4: host_stat 0x0
[ 133.481105] ata4: protocol 5 task_state 1
[ 133.481116] ata4: host_stat 0x0
[ 133.481700] ata4: protocol 5 task_state 1
[ 133.481704] ata4: host_stat 0x0
[ 133.482309] ata4: protocol 5 task_state 1
[ 133.482312] ata4: host_stat 0x0
[ 133.483544] ata4: protocol 5 task_state 1
[ 133.483547] ata4: host_stat 0x0
[ 133.485033] ata4: protocol 5 task_state 1
[ 133.485037] ata4: host_stat 0x0
[ 133.485646] ata4: protocol 5 task_state 1
[ 133.485650] ata4: host_stat 0x0
[ 133.486874] ata4: protocol 5 task_state 1
[ 133.486878] ata4: host_stat 0x0
[ 133.488399] ata4: protocol 5 task_state 1
[ 133.488403] ata4: host_stat 0x0
[ 133.489013] ata4: protocol 5 task_state 1
[ 133.489016] ata4: host_stat 0x0
[ 133.490231] ata4: protocol 5 task_state 1
[ 133.490235] ata4: host_stat 0x0
[ 133.491721] ata4: protocol 5 task_state 1
[ 133.491724] ata4: host_stat 0x0
[ 133.492323] ata4: protocol 5 task_state 1
[ 133.492326] ata4: host_stat 0x0
[ 133.493545] ata4: protocol 5 task_state 1
[ 133.493548] ata4: host_stat 0x0
[ 134.715230] ata4: protocol 5 task_state 1
[ 134.715240] ata4: host_stat 0x0
[ 134.715821] ata4: protocol 5 task_state 1
[ 134.715825] ata4: host_stat 0x0
[ 135.435628] ata4.01: qc timeout (cmd 0xa0)
[ 135.435646] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 135.435660] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 135.435663] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 142.425183] ata4: port is slow to respond, please be patient (Status
0xd8)
[ 165.406773] ata4: port failed to respond (30 secs, Status 0xd8)
[ 165.406786] ata4: soft resetting port
[ 165.573946] ATA: abnormal status 0x7F on port 0xE08815DF
[ 165.585332] ATA: abnormal status 0x7F on port 0xE08815DF
[ 165.746275] ata4: protocol 2 task_state 1 (dev_stat 0x51)
[ 165.746286] ata4: protocol 2 task_state 3 (dev_stat 0x51)
[ 165.746320] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 165.746324] ata4.01: revalidation failed (errno=-5)
[ 165.746330] ata4: failed to recover some devices, retrying in 5 secs
[ 170.742819] ata4: soft resetting port
[ 170.909969] ATA: abnormal status 0x7F on port 0xE08815DF
[ 170.921349] ATA: abnormal status 0x7F on port 0xE08815DF
[ 171.082305] ata4: protocol 2 task_state 1 (dev_stat 0x58)
[ 171.082568] ata4: protocol 2 task_state 2 (dev_stat 0x50)
[ 171.082613] ata4.01: device is on DMA blacklist, disabling DMA
[ 171.082747] ata4: protocol 1 task_state 2
[ 171.082751] ata4: host_stat 0x4
[ 171.082757] ata4: protocol 1 task_state 2 (dev_stat 0x50)
[ 171.246050] ata4: protocol 2 task_state 1 (dev_stat 0x58)
[ 171.246333] ata4: protocol 2 task_state 2 (dev_stat 0x50)
[ 171.246373] ata4.01: configured for PIO4
[ 171.246421] ata4: EH complete
[ 171.246518] CDB (4:0,1,0) 1e 00 00 00 00 00 00 00 00
[ 171.246578] ata4: protocol 6 task_state 4 (dev_stat 0x58)
[ 171.246878] ata4: protocol 6 task_state 2
[ 171.246882] ata4: host_stat 0x4
[ 171.246887] ata4: protocol 6 task_state 2 (dev_stat 0x50)
[ 171.249402] CDB (4:0,1,0) 00 00 00 00 00 00 00 00 00
[ 171.249486] ata4: protocol 6 task_state 4 (dev_stat 0x58)
[ 171.249988] ata4: protocol 6 task_state 2
[ 171.249992] ata4: host_stat 0x4
[ 171.249998] ata4: protocol 6 task_state 2 (dev_stat 0x51)
[ 171.250001] ata4: protocol 6 task_state 3 (dev_stat 0x51)
[ 171.250115] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.250706] ata4: protocol 5 task_state 1
[ 171.250709] ata4: host_stat 0x4
[ 171.250714] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 171.250821] ata4: protocol 5 task_state 1
[ 171.250824] ata4: host_stat 0x4
[ 171.250830] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 171.250833] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 171.250904] CDB (4:0,1,0) 43 00 00 00 00 00 00 00 0c
[ 171.250958] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.251386] ata4: protocol 5 task_state 1
[ 171.251389] ata4: host_stat 0x4
[ 171.251395] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.251398] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.251401] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 171.251478] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.252071] ata4: protocol 5 task_state 1
[ 171.252074] ata4: host_stat 0x4
[ 171.252079] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 171.252187] ata4: protocol 5 task_state 1
[ 171.252190] ata4: host_stat 0x4
[ 171.252196] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 171.252199] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 171.252231] CDB (4:0,1,0) 43 00 00 00 00 00 00 00 0c
[ 171.252284] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.252751] ata4: protocol 5 task_state 1
[ 171.252755] ata4: host_stat 0x4
[ 171.252760] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.252763] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.252766] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 171.252842] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.253437] ata4: protocol 5 task_state 1
[ 171.253440] ata4: host_stat 0x4
[ 171.253445] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 171.253552] ata4: protocol 5 task_state 1
[ 171.253555] ata4: host_stat 0x4
[ 171.253561] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 171.253564] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 171.253592] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 171.253646] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.254119] ata4: protocol 5 task_state 1
[ 171.254123] ata4: host_stat 0x4
[ 171.254129] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.254132] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.254135] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 171.254247] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.254810] ata4: protocol 5 task_state 1
[ 171.254820] ata4: host_stat 0x4
[ 171.254827] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 171.254932] ata4: protocol 5 task_state 1
[ 171.254936] ata4: host_stat 0x4
[ 171.254942] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 171.254945] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 171.255986] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 171.256064] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.256595] ata4: protocol 5 task_state 1
[ 171.256600] ata4: host_stat 0x4
[ 171.256605] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.256608] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.256611] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 171.256703] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.257276] ata4: protocol 5 task_state 1
[ 171.257279] ata4: host_stat 0x4
[ 171.257285] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 171.257392] ata4: protocol 5 task_state 1
[ 171.257395] ata4: host_stat 0x4
[ 171.257400] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 171.257403] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 171.257450] CDB (4:0,1,0) 25 00 00 00 00 00 00 00 00
[ 171.257504] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.257956] ata4: protocol 5 task_state 1
[ 171.257960] ata4: host_stat 0x4
[ 171.257965] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.257968] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.257971] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 171.258084] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.258641] ata4: protocol 5 task_state 1
[ 171.258645] ata4: host_stat 0x4
[ 171.258650] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 171.258758] ata4: protocol 5 task_state 1
[ 171.258761] ata4: host_stat 0x4
[ 171.258766] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 171.258769] ata4: protocol 5 task_state 2 (dev_stat 0x50)
[ 171.258863] CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00
[ 171.258918] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 171.259359] ata4: protocol 5 task_state 1
[ 171.259363] ata4: host_stat 0x4
[ 171.259368] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.259371] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.259374] ata4: protocol 5 task_state 3 (dev_stat 0x51)
[ 171.259451] ata4: protocol 5 task_state 4 (dev_stat 0x58)
[ 172.538040] ata4: protocol 5 task_state 1
[ 172.538051] ata4: host_stat 0x0
[ 172.538145] ata4: protocol 5 task_state 1
[ 172.538150] ata4: host_stat 0x0
[ 173.424869] ata4: protocol 5 task_state 1
[ 173.424880] ata4: host_stat 0x0
[ 173.425452] ata4: protocol 5 task_state 1
[ 173.425456] ata4: host_stat 0x0
[ 173.426060] ata4: protocol 5 task_state 1
[ 173.426064] ata4: host_stat 0x0
[ 173.427291] ata4: protocol 5 task_state 1
[ 173.427295] ata4: host_stat 0x0
[ 173.428809] ata4: protocol 5 task_state 1
[ 173.428812] ata4: host_stat 0x0
[ 173.429410] ata4: protocol 5 task_state 1
[ 173.429414] ata4: host_stat 0x0
[ 173.430643] ata4: protocol 5 task_state 1
[ 173.430647] ata4: host_stat 0x0
[ 173.432169] ata4: protocol 5 task_state 1
[ 173.432172] ata4: host_stat 0x0
[ 173.432782] ata4: protocol 5 task_state 1
[ 173.432785] ata4: host_stat 0x0
[ 173.433995] ata4: protocol 5 task_state 1
[ 173.433999] ata4: host_stat 0x0
[ 173.435542] ata4: protocol 5 task_state 1
[ 173.435546] ata4: host_stat 0x0
[ 173.436143] ata4: protocol 5 task_state 1
[ 173.436147] ata4: host_stat 0x0
[ 173.437382] ata4: protocol 5 task_state 1
[ 173.437386] ata4: host_stat 0x0
[ 174.343900] ata4: protocol 5 task_state 1
[ 174.343911] ata4: host_stat 0x0
[ 174.344021] ata4: protocol 5 task_state 1
[ 174.344025] ata4: host_stat 0x0
[ 175.981991] ata4: protocol 5 task_state 1
[ 175.982004] ata4: host_stat 0x0
[ 175.982068] ata4: protocol 5 task_state 1
[ 175.982072] ata4: host_stat 0x0
[ 183.700872] ata4: protocol 5 task_state 1
[ 183.700884] ata4: host_stat 0x0
[ 183.701438] ata4: protocol 5 task_state 1
[ 183.701442] ata4: host_stat 0x0
[ 187.149097] ata4: protocol 5 task_state 1
[ 187.149108] ata4: host_stat 0x0
[ 187.149222] ata4: protocol 5 task_state 1
[ 187.149226] ata4: host_stat 0x0
[ 192.175325] ata4: protocol 5 task_state 1
[ 192.175336] ata4: host_stat 0x0
[ 192.175442] ata4: protocol 5 task_state 1
[ 192.175446] ata4: host_stat 0x0
[ 193.396823] ata4: protocol 5 task_state 1
[ 193.396834] ata4: host_stat 0x0
[ 193.397412] ata4: protocol 5 task_state 1
[ 193.397416] ata4: host_stat 0x0
[ 193.398020] ata4: protocol 5 task_state 1
[ 193.398024] ata4: host_stat 0x0
[ 193.399255] ata4: protocol 5 task_state 1
[ 193.399259] ata4: host_stat 0x0
[ 193.400756] ata4: protocol 5 task_state 1
[ 193.400760] ata4: host_stat 0x0
[ 193.401364] ata4: protocol 5 task_state 1
[ 193.401368] ata4: host_stat 0x0
[ 193.402591] ata4: protocol 5 task_state 1
[ 193.402594] ata4: host_stat 0x0
[ 193.404122] ata4: protocol 5 task_state 1
[ 193.404125] ata4: host_stat 0x0
[ 193.404736] ata4: protocol 5 task_state 1
[ 193.404739] ata4: host_stat 0x0
[ 193.405943] ata4: protocol 5 task_state 1
[ 193.405946] ata4: host_stat 0x0
[ 193.407427] ata4: protocol 5 task_state 1
[ 193.407430] ata4: host_stat 0x0
[ 193.408033] ata4: protocol 5 task_state 1
[ 193.408037] ata4: host_stat 0x0
[ 193.409256] ata4: protocol 5 task_state 1
[ 193.409260] ata4: host_stat 0x0
[ 201.213244] ata4.01: qc timeout (cmd 0xa0)
[ 201.213261] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
frozen
[ 201.213275] ata4.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0
cdb 0x12 data 254 in
[ 201.213278] res 51/51:03:00:12:00/00:00:00:00:00/b0 Emask
0x5 (timeout)
[ 208.202798] ata4: port is slow to respond, please be patient (Status
0xd8)
[ 226.517486] fuse init (API version 7.8)
[ 226.517573] PM: Adding info for No Bus:fuse
[ 226.556633] lp0: using parport0 (interrupt-driven).
[ 226.626319] PM: Adding info for No Bus:i2c-0
[ 226.679158] PM: Adding info for i2c:0-0050
[ 226.695133] PM: Adding info for i2c:0-0051
[ 226.765520] PM: Adding info for No Bus:i2c-9191
[ 226.804442] it87: Found IT8712F chip at 0x290, revision 4
[ 226.806966] PM: Adding info for i2c:9191-0290
[ 226.809416] it87-isa 9191-0290: Detected broken BIOS defaults,
disabling PWM interface
[ 226.960072] Adding 1044184k swap on
/dev/disk/by-uuid/5c6a2d8c-54c1-44cb-8f1b-4a159373a120. Priority:-1
extents:1 across:1044184k
[ 227.198847] EXT3 FS on sda7, internal journal
[ 230.723686] kjournald starting. Commit interval 5 seconds
[ 230.723853] EXT3 FS on sda1, internal journal
[ 230.723860] EXT3-fs: mounted filesystem with ordered data mode.
[ 230.749428] kjournald starting. Commit interval 5 seconds
[ 230.749625] EXT3 FS on sda3, internal journal
[ 230.749633] EXT3-fs: mounted filesystem with ordered data mode.
[ 230.801490] kjournald starting. Commit interval 5 seconds
[ 230.801742] EXT3 FS on sdb5, internal journal
[ 230.801751] EXT3-fs: mounted filesystem with ordered data mode.
[ 230.878961] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 230.950919] NTFS volume version 3.1.
[ 231.075849] kjournald starting. Commit interval 5 seconds
[ 231.076123] EXT3 FS on sdb6, internal journal
[ 231.076131] EXT3-fs: mounted filesystem with ordered data mode.
[ 231.096927] kjournald starting. Commit interval 5 seconds
[ 231.097091] EXT3 FS on sda5, internal journal
[ 231.097099] EXT3-fs: mounted filesystem with ordered data mode.
[ 231.127698] kjournald starting. Commit interval 5 seconds
[ 231.127853] EXT3 FS on sda2, internal journal
[ 231.127862] EXT3-fs: mounted filesystem with ordered data mode.
[ 231.184388] ata4: port failed to respond (30 secs, Status 0xd8)
[ 231.184399] ata4: soft resetting port
[ 231.351557] ATA: abnormal status 0x7F on port 0xE08815DF
[ 231.363013] ATA: abnormal status 0x7F on port 0xE08815DF
[ 231.523914] ata4: protocol 2 task_state 1 (dev_stat 0x51)
[ 231.523925] ata4: protocol 2 task_state 3 (dev_stat 0x51)
[ 231.523964] ata4.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 231.523968] ata4.01: revalidation failed (errno=-5)
[ 231.523976] ata4: failed to recover some devices, retrying in 5 secs
[ 233.208238] NET: Registered protocol family 17
[ 236.520433] ata4: soft resetting port
[ 236.687575] ATA: abnormal status 0x7F on port 0xE08815DF
[ 236.698947] ATA: abnormal status 0x7F on port 0xE08815DF
[ 236.859904] ata4: protocol 2 task_state 1 (dev_stat 0x58)
[ 236.860163] ata4: protocol 2 task_state 2 (dev_stat 0x50)
[ 236.860206] ata4.01: device is on DMA blacklist, disabling DMA
[ 236.860334] ata4: protocol 1 task_state 2
[ 236.860338] ata4: host_stat 0x4
[ 236.860344] ata4: protocol 1 task_state 2 (dev_stat 0x50)
[ 237.023658] ata4: protocol 2 task_state 1 (dev_stat 0x58)
[ 237.023933] ata4: protocol 2 task_state 2 (dev_stat 0x50)
[ 237.023963] ata4.01: configured for PIO4
[ 237.023990] ata4: EH complete
[ 237.024078] CDB (4:0,1,0) 1e 00 00 00 00 00 00 00 00
[ 237.024136] ata4: protocol 6 task_state 4 (dev_stat 0x58)
[ 237.024466] ata4: protocol 6 task_state 2
[ 237.024470] ata4: host_stat 0x4
[ 237.024476] ata4: protocol 6 task_state 2 (dev_stat 0x50)
[ 237.492179] PM: Adding info for No Bus:vcs2
[ 237.495203] PM: Adding info for No Bus:vcsa2
[ 237.498249] PM: Removing info for No Bus:vcs2
[ 237.500841] PM: Removing info for No Bus:vcsa2
[ 237.503592] PM: Adding info for No Bus:vcs3
[ 237.506509] PM: Adding info for No Bus:vcsa3
[ 237.509627] PM: Removing info for No Bus:vcs3
[ 237.512230] PM: Removing info for No Bus:vcsa3
[ 237.514952] PM: Adding info for No Bus:vcs4
[ 237.517864] PM: Adding info for No Bus:vcsa4
[ 237.520939] PM: Removing info for No Bus:vcs4
[ 237.523511] PM: Removing info for No Bus:vcsa4
[ 237.526211] PM: Adding info for No Bus:vcs5
[ 237.529177] PM: Adding info for No Bus:vcsa5
[ 237.532242] PM: Removing info for No Bus:vcs5
[ 237.534796] PM: Removing info for No Bus:vcsa5
[ 237.537549] PM: Adding info for No Bus:vcs6
[ 237.540488] PM: Adding info for No Bus:vcsa6
[ 237.543578] PM: Removing info for No Bus:vcs6
[ 237.546143] PM: Removing info for No Bus:vcsa6
[ 237.601243] PM: Adding info for No Bus:vcs2
[ 237.604278] PM: Adding info for No Bus:vcsa2
[ 237.608738] PM: Removing info for No Bus:vcs2
[ 237.611399] PM: Removing info for No Bus:vcsa2
[ 237.617946] PM: Adding info for No Bus:vcs3
[ 237.620989] PM: Adding info for No Bus:vcsa3
[ 237.625468] PM: Removing info for No Bus:vcs3
[ 237.628191] PM: Removing info for No Bus:vcsa3
[ 237.634691] PM: Adding info for No Bus:vcs4
[ 237.637729] PM: Adding info for No Bus:vcsa4
[ 237.642211] PM: Removing info for No Bus:vcs4
[ 237.644862] PM: Removing info for No Bus:vcsa4
[ 237.651417] PM: Adding info for No Bus:vcs5
[ 237.654425] PM: Adding info for No Bus:vcsa5
[ 237.658930] PM: Removing info for No Bus:vcs5
[ 237.661557] PM: Removing info for No Bus:vcsa5
[ 237.668159] PM: Adding info for No Bus:vcs6
[ 237.671196] PM: Adding info for No Bus:vcsa6
[ 237.675637] PM: Removing info for No Bus:vcs6
[ 237.678280] PM: Removing info for No Bus:vcsa6
[ 238.048195] PM: Adding info for No Bus:vcs4
[ 238.048999] PM: Adding info for No Bus:vcsa4
[ 238.051342] PM: Adding info for No Bus:vcs5
[ 238.052199] PM: Adding info for No Bus:vcsa5
[ 238.063699] PM: Adding info for No Bus:vcs3
[ 238.064497] PM: Adding info for No Bus:vcsa3
[ 238.076877] PM: Adding info for No Bus:vcs6
[ 238.079930] PM: Adding info for No Bus:vcsa6
[ 238.083802] PM: Adding info for No Bus:vcs2
[ 238.084609] PM: Adding info for No Bus:vcsa2
[ 243.707008] Capability LSM initialized
[ 244.118470] PM: Adding info for No Bus:parport0
[ 244.123012] ppdev: user-space parallel port driver
[ 246.876872] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 246.877503] PM: Adding info for No Bus:apm_bios
[ 250.339650] PM: Adding info for No Bus:vcs7
[ 250.343953] PM: Adding info for No Bus:vcsa7
[ 250.920062] [drm] Initialized drm 1.1.0 20060810
[ 250.989635] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 252.707001] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 252.707263] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 252.707284] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 253.048476] [drm] Setting GART location based on new memory map
[ 253.048548] [drm] writeback test succeeded in 1 usecs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 12:10 ` Sergei Shtylyov
2007-03-19 19:35 ` YUP
@ 2007-03-19 23:02 ` YUP
2007-03-20 15:23 ` Sergei Shtylyov
2007-03-23 22:13 ` Bartlomiej Zolnierkiewicz
2 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-19 23:02 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: Bartlomiej Zolnierkiewicz, albertl, linux-ide
Hi Sergei,
Well, I checked pata_pdc2027x.c code and found that code completely
rewrited. For unexperienced user it is not so easy to apply.
Yarema
> There used to be Albert's patch enabling ATAPIT DMA in this driver:
>
> http://marc.info/?l=linux-ide&m=111027913608663
>
> Oh my, that was 2 years ago, and all slipped thru the cracks... :-)
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 19:35 ` YUP
@ 2007-03-20 7:27 ` Albert Lee
2007-03-20 9:07 ` Albert Lee
2007-03-21 4:52 ` Albert Lee
1 sibling, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-20 7:27 UTC (permalink / raw)
To: YUP; +Cc: Sergei Shtylyov, Bartlomiej Zolnierkiewicz, albertl, linux-ide
YUP wrote:
> Hi Sergei, Albert and Bartek,
>
> Thanks for the patch. If you dealt with it, could you please apply this
> patch to 2.6.20.3 kernel and send me diff? I'm just afraid that I
> couldn't do it right.
>
> Albert and Bartek,
>
> please find latest dmsg output with Albert's patch. I quoted here only
> output after the first "qc timeout" as Albert requested (see below).
> Hope it will help you.
>
Thanks for the help. Your trace is valuable.
It seems we have identified the cause.
The AOpen drive returned 0x51 (check condition) on INQUIRY of 254 bytes,
and it seems to mess up when REQUEST SENSE was issued:
[ 105.480046] CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00
[ 105.480101] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== INQUIRY
[ 105.480551] ata4: protocol 5 task_state 1
[ 105.480555] ata4: host_stat 0x4
[ 105.480561] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 105.480564] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 105.480567] ata4: protocol 5 task_state 3 (dev_stat 0x51) <= check condition
[ 105.480644] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== REQUEST SENSE
[ 113.509692] ata4: protocol 5 task_state 1 <== interrupt. device BSY.
[ 113.509703] ata4: host_stat 0x0 <== device messed up
[ 113.510276] ata4: protocol 5 task_state 1
[ 113.510280] ata4: host_stat 0x0
[ 113.510890] ata4: protocol 5 task_state 1
[ 113.510894] ata4: host_stat 0x0
[ 113.512120] ata4: protocol 5 task_state 1 <== .. loop until time out
This INQUIRY problem can be reliable reproduced:
[ 171.258863] CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00
[ 171.258918] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== INQUIRY
[ 171.259359] ata4: protocol 5 task_state 1
[ 171.259363] ata4: host_stat 0x4
[ 171.259368] ata4: protocol 5 task_state 1 (dev_stat 0x51)
[ 171.259371] ata4: protocol 5 task_state 2 (dev_stat 0x51)
[ 171.259374] ata4: protocol 5 task_state 3 (dev_stat 0x51)<= check condition
[ 171.259451] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== REQUEST SENSE
[ 172.538040] ata4: protocol 5 task_state 1 <== interrupt. device BSY.
[ 172.538051] ata4: host_stat 0x0 <== device messed up
[ 172.538145] ata4: protocol 5 task_state 1
[ 172.538150] ata4: host_stat 0x0
[ 173.424869] ata4: protocol 5 task_state 1 <== .. loop until time out
Except INQUIRY, other commands/REQUEST SENSE are ok.
(ex. TEST UNIT READY)
[ 105.456944] CDB (4:0,1,0) 00 00 00 00 00 00 00 00 00
[ 105.457003] ata4: protocol 6 task_state 4 (dev_stat 0x58) <= TEST UNIT READY
[ 105.457551] ata4: protocol 6 task_state 2
[ 105.457555] ata4: host_stat 0x4
[ 105.457561] ata4: protocol 6 task_state 2 (dev_stat 0x51)
[ 105.457563] ata4: protocol 6 task_state 3 (dev_stat 0x51)<= check condition
[ 105.457647] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== REQUEST SENSE
[ 105.458233] ata4: protocol 5 task_state 1 <== interrupt. device ok.
[ 105.458237] ata4: host_stat 0x4
[ 105.458242] ata4: protocol 5 task_state 1 (dev_stat 0x58)
[ 105.458350] ata4: protocol 5 task_state 1
[ 105.458353] ata4: host_stat 0x4 <== device returns sense data ok.
[ 105.458358] ata4: protocol 5 task_state 1 (dev_stat 0x50)
[ 105.458361] ata4: protocol 5 task_state 2 (dev_stat 0x50)
Hi Yarema,
Could you help to send me the dmesg before the first qc timeout (i.e. before
[ 69.646046] ata4.01: qc timeout (cmd 0xa0)).
We can see how the AOpen drive deal with the first INQUIRY (e.g. 36 bytes).
Thanks.
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-20 7:27 ` Albert Lee
@ 2007-03-20 9:07 ` Albert Lee
0 siblings, 0 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-20 9:07 UTC (permalink / raw)
To: YUP; +Cc: Sergei Shtylyov, Bartlomiej Zolnierkiewicz, linux-ide
Albert Lee wrote:
> YUP wrote:
>
>>Hi Sergei, Albert and Bartek,
>>
>>Thanks for the patch. If you dealt with it, could you please apply this
>>patch to 2.6.20.3 kernel and send me diff? I'm just afraid that I
>>couldn't do it right.
>>
>>Albert and Bartek,
>>
>>please find latest dmsg output with Albert's patch. I quoted here only
>>output after the first "qc timeout" as Albert requested (see below).
>>Hope it will help you.
>>
>
>
> Thanks for the help. Your trace is valuable.
> It seems we have identified the cause.
>
> The AOpen drive returned 0x51 (check condition) on INQUIRY of 254 bytes,
> and it seems to mess up when REQUEST SENSE was issued:
>
> [ 105.480046] CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00
> [ 105.480101] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== INQUIRY
> [ 105.480551] ata4: protocol 5 task_state 1
> [ 105.480555] ata4: host_stat 0x4
> [ 105.480561] ata4: protocol 5 task_state 1 (dev_stat 0x51)
> [ 105.480564] ata4: protocol 5 task_state 2 (dev_stat 0x51)
> [ 105.480567] ata4: protocol 5 task_state 3 (dev_stat 0x51) <= check condition
> [ 105.480644] ata4: protocol 5 task_state 4 (dev_stat 0x58) <== REQUEST SENSE
> [ 113.509692] ata4: protocol 5 task_state 1 <== interrupt. device BSY.
> [ 113.509703] ata4: host_stat 0x0 <== device messed up
> [ 113.510276] ata4: protocol 5 task_state 1
> [ 113.510280] ata4: host_stat 0x0
> [ 113.510890] ata4: protocol 5 task_state 1
> [ 113.510894] ata4: host_stat 0x0
> [ 113.512120] ata4: protocol 5 task_state 1 <== .. loop until time out
>
> This INQUIRY problem can be reliable reproduced:
Hi Yarema,
Could you please apply the attached patch (which adds the AOpen 56X/AKH to
the BLIST_INQUIRY_36 blacklist) on top of previous patches.
(Please keep using the libata + pata_pdc2027x to drive the AOpen 56X.)
Let's see if this can fix the INQUIRY time out problem of the AOpen 56X/AKH.
--
Thanks,
Albert
--- linux-2.6.20.3/drivers/scsi/scsi_devinfo.c 2007-03-14 02:27:08.000000000 +0800
+++ linux-2.6.20.3-patch/drivers/scsi/scsi_devinfo.c 2007-03-20 16:52:29.000000000 +0800
@@ -236,6 +236,7 @@ static struct {
{"XYRATEX", "RS", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"Zzyzx", "RocketStor 500S", NULL, BLIST_SPARSELUN},
{"Zzyzx", "RocketStor 2000", NULL, BLIST_SPARSELUN},
+ {"E-IDE", "CD-ROM 56X/AKH", NULL, BLIST_INQUIRY_36},
{ NULL, NULL, NULL, 0 },
};
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 23:02 ` YUP
@ 2007-03-20 15:23 ` Sergei Shtylyov
0 siblings, 0 replies; 47+ messages in thread
From: Sergei Shtylyov @ 2007-03-20 15:23 UTC (permalink / raw)
To: YUP; +Cc: Bartlomiej Zolnierkiewicz, albertl, linux-ide
Hello.
YUP wrote:
> Well, I checked pata_pdc2027x.c code and found that code completely
> rewrited. For unexperienced user it is not so easy to apply.
This patch was to drivers/ide/pci/pdc202xx_new.c -- and I thought libata
driver had this enabled since then... wait, it *is* enabled there.
> Yarema
>> There used to be Albert's patch enabling ATAPIT DMA in this driver:
>> http://marc.info/?l=linux-ide&m=111027913608663
>> Oh my, that was 2 years ago, and all slipped thru the cracks... :-)
MBR, Sergei
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 19:35 ` YUP
2007-03-20 7:27 ` Albert Lee
@ 2007-03-21 4:52 ` Albert Lee
2007-03-21 9:01 ` YUP
1 sibling, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-21 4:52 UTC (permalink / raw)
To: YUP; +Cc: Sergei Shtylyov, Bartlomiej Zolnierkiewicz, albertl, linux-ide
Hi Yarema,
Thanks for the help.
Some of the dmesgs you sent were truncated by the mailer, etc.
We know it is INQUIRY, but we still have no clue why/how the
INQUIRY or something caused the problem.
Could you please open a bug on http://bugzilla.kernel.org/ and
attach the dmesg there for easier tracking of the problem.
Thanks,
Albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-21 4:52 ` Albert Lee
@ 2007-03-21 9:01 ` YUP
2007-03-22 6:06 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: YUP @ 2007-03-21 9:01 UTC (permalink / raw)
To: albertl; +Cc: Bartlomiej Zolnierkiewicz, linux-ide
Hi Albert,
I attached previous dmesg and today dmesg output from the same kernel
with applied your patches: http://bugzilla.kernel.org/show_bug.cgi?id=8244
Best wishes,
Yarema
> Could you please open a bug on http://bugzilla.kernel.org/ and
> attach the dmesg there for easier tracking of the problem.
>
> Thanks,
>
> Albert
>
>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-21 9:01 ` YUP
@ 2007-03-22 6:06 ` Albert Lee
2007-03-22 7:09 ` Tejun Heo
` (2 more replies)
0 siblings, 3 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-22 6:06 UTC (permalink / raw)
To: YUP
Cc: albertl, Bartlomiej Zolnierkiewicz, linux-ide, Sergei Shtylyov,
Jeff Garzik
Hi Yarema,
Thanks for the detailed log.
It looks like the bad INQUIRY command
"CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00" (INQUIRY, length=254, EVPD=1)
is coming from the user space, not the SCSI mid-layer.
I guess two problems together caused this bug:
1. Ubuntu Linux issues an incorrect INQUIRY command to the drive.
(Other distros seem to have the INQUIRY correct.)
2. The incorrect INQUIRY happens to cause the AOpen drive frozen.
(The HP drive is immune from the incorrect INQUIRY command.
"check condition" is returned for the bad INQUIRY.)
We have two possible solutions here:
a. Patch Ubuntu, such that the incorrect INQUIRY is fixed.
b. Patch kernel, such that the AOpen drives are blacklisted.
Each INQUIRY is inspected for the blacklisted drives.
If the INQUIRY looks wrong, the INQUIRY is rejected.
I guess a. is the preferred solution...
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-22 6:06 ` Albert Lee
@ 2007-03-22 7:09 ` Tejun Heo
2007-03-22 12:37 ` Alan Cox
2007-03-22 14:50 ` Sergei Shtylyov
2 siblings, 0 replies; 47+ messages in thread
From: Tejun Heo @ 2007-03-22 7:09 UTC (permalink / raw)
To: albertl
Cc: YUP, Bartlomiej Zolnierkiewicz, linux-ide, Sergei Shtylyov,
Jeff Garzik
Albert Lee wrote:
> Hi Yarema,
>
> Thanks for the detailed log.
> It looks like the bad INQUIRY command
> "CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00" (INQUIRY, length=254, EVPD=1)
> is coming from the user space, not the SCSI mid-layer.
>
> I guess two problems together caused this bug:
> 1. Ubuntu Linux issues an incorrect INQUIRY command to the drive.
> (Other distros seem to have the INQUIRY correct.)
> 2. The incorrect INQUIRY happens to cause the AOpen drive frozen.
> (The HP drive is immune from the incorrect INQUIRY command.
> "check condition" is returned for the bad INQUIRY.)
>
> We have two possible solutions here:
> a. Patch Ubuntu, such that the incorrect INQUIRY is fixed.
> b. Patch kernel, such that the AOpen drives are blacklisted.
> Each INQUIRY is inspected for the blacklisted drives.
> If the INQUIRY looks wrong, the INQUIRY is rejected.
>
> I guess a. is the preferred solution...
I second Albert's opinion. Please report this to ubuntu people so that
the origin of the problem can be fixed.
Thanks a lot. I admire your ability and patience in tracking these
difficult issues. :-)
--
tejun
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-22 6:06 ` Albert Lee
2007-03-22 7:09 ` Tejun Heo
@ 2007-03-22 12:37 ` Alan Cox
2007-03-23 3:40 ` Albert Lee
2007-03-22 14:50 ` Sergei Shtylyov
2 siblings, 1 reply; 47+ messages in thread
From: Alan Cox @ 2007-03-22 12:37 UTC (permalink / raw)
To: albertl
Cc: albertcc, YUP, Bartlomiej Zolnierkiewicz, linux-ide,
Sergei Shtylyov, Jeff Garzik
> We have two possible solutions here:
> a. Patch Ubuntu, such that the incorrect INQUIRY is fixed.
> b. Patch kernel, such that the AOpen drives are blacklisted.
> Each INQUIRY is inspected for the blacklisted drives.
> If the INQUIRY looks wrong, the INQUIRY is rejected.
>
> I guess a. is the preferred solution...
We have two problems here
#1 Ubuntu got the inquiry command wrong
#2 Until now we considered "INQUIRY" a safe command for SG_IO passthrough.
We can't really take INQUIRY out of SG_IO so do we decide its the
hardware vendors problem or do something cleverer in the filters ?
Alan
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-22 6:06 ` Albert Lee
2007-03-22 7:09 ` Tejun Heo
2007-03-22 12:37 ` Alan Cox
@ 2007-03-22 14:50 ` Sergei Shtylyov
2007-03-23 3:21 ` Albert Lee
2 siblings, 1 reply; 47+ messages in thread
From: Sergei Shtylyov @ 2007-03-22 14:50 UTC (permalink / raw)
To: albertl; +Cc: YUP, Bartlomiej Zolnierkiewicz, linux-ide, Jeff Garzik
Hello.
Albert Lee wrote:
> Thanks for the detailed log.
> It looks like the bad INQUIRY command
> "CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00" (INQUIRY, length=254, EVPD=1)
> is coming from the user space, not the SCSI mid-layer.
> I guess two problems together caused this bug:
> 1. Ubuntu Linux issues an incorrect INQUIRY command to the drive.
> (Other distros seem to have the INQUIRY correct.)
But what is incorrect about sending INQUIRY with EVPD bit?
MBR, Sergei
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-22 14:50 ` Sergei Shtylyov
@ 2007-03-23 3:21 ` Albert Lee
0 siblings, 0 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-23 3:21 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: albertl, YUP, Bartlomiej Zolnierkiewicz, linux-ide, Jeff Garzik,
Alan Cox, Tejun Heo
Sergei Shtylyov wrote:
> Hello.
>
> Albert Lee wrote:
>
>> Thanks for the detailed log.
>> It looks like the bad INQUIRY command
>> "CDB (4:0,1,0) 12 01 00 00 fe 00 00 00 00" (INQUIRY, length=254,
>> EVPD=1)
>> is coming from the user space, not the SCSI mid-layer.
>
>
>> I guess two problems together caused this bug:
>> 1. Ubuntu Linux issues an incorrect INQUIRY command to the drive.
>> (Other distros seem to have the INQUIRY correct.)
>
>
> But what is incorrect about sending INQUIRY with EVPD bit?
Nothing wrong from the SCSI point of view.
However, in the early ATAPI spec (sff-8020i), this EVPD bit is
"reserved". And apprently some imperfect ATAPI CD-ROM drive doesn't
handle it well when EVPD = 1. :(
Hmm, how about the revised version:
1. Ubuntu Linux issues a correct INQUIRY command to the drive
which set EVPD = 1. However, EVPD is "reserved" per early ATAPI
spec and the AOpen 56X/AKH drive times out in this case.
...
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-22 12:37 ` Alan Cox
@ 2007-03-23 3:40 ` Albert Lee
2007-03-23 15:19 ` Douglas Gilbert
0 siblings, 1 reply; 47+ messages in thread
From: Albert Lee @ 2007-03-23 3:40 UTC (permalink / raw)
To: Alan Cox
Cc: albertl, YUP, Bartlomiej Zolnierkiewicz, linux-ide,
Sergei Shtylyov, Jeff Garzik, dougg
Alan Cox wrote:
>>We have two possible solutions here:
>>a. Patch Ubuntu, such that the incorrect INQUIRY is fixed.
>>b. Patch kernel, such that the AOpen drives are blacklisted.
>> Each INQUIRY is inspected for the blacklisted drives.
>> If the INQUIRY looks wrong, the INQUIRY is rejected.
>>
>>I guess a. is the preferred solution...
>
>
> We have two problems here
>
> #1 Ubuntu got the inquiry command wrong
>
> #2 Until now we considered "INQUIRY" a safe command for SG_IO passthrough.
>
> We can't really take INQUIRY out of SG_IO so do we decide its the
> hardware vendors problem or do something cleverer in the filters ?
>
Maybe the SG_IO author has better idea (ccing Doug)?
BTW, in addition to the AOpen "INQUIRY with EVPD" problem, we have
another imperfect ATAPI drive (TORiSAN) that freezes when "READ >= 128KB".
(http://bugzilla.kernel.org/show_bug.cgi?id=6710)
We can limit "dev->max_sectors" to workaround the TORiSAN problem.
But I don't know whether "dev->max_sectors" also works for SG_IO?
If no, some user space application, unaware of the problem,
might send a "correct" READ that locks the drive completely.
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-23 3:40 ` Albert Lee
@ 2007-03-23 15:19 ` Douglas Gilbert
2007-03-26 5:50 ` Albert Lee
0 siblings, 1 reply; 47+ messages in thread
From: Douglas Gilbert @ 2007-03-23 15:19 UTC (permalink / raw)
To: albertl
Cc: Alan Cox, YUP, Bartlomiej Zolnierkiewicz, linux-ide,
Sergei Shtylyov, Jeff Garzik
Albert Lee wrote:
> Alan Cox wrote:
>>> We have two possible solutions here:
>>> a. Patch Ubuntu, such that the incorrect INQUIRY is fixed.
>>> b. Patch kernel, such that the AOpen drives are blacklisted.
>>> Each INQUIRY is inspected for the blacklisted drives.
>>> If the INQUIRY looks wrong, the INQUIRY is rejected.
>>>
>>> I guess a. is the preferred solution...
>>
>> We have two problems here
>>
>> #1 Ubuntu got the inquiry command wrong
>>
>> #2 Until now we considered "INQUIRY" a safe command for SG_IO passthrough.
>>
>> We can't really take INQUIRY out of SG_IO so do we decide its the
>> hardware vendors problem or do something cleverer in the filters ?
Albert,
"Definitions:
....
Reserved: A keyword referring to bits, bytes, words, fields
and code values set aside for future standardization. A
reserved bit, byte, word or field shall be set to zero, or
in accordance with a future version to this standard.
Recipients are not required to check reserved bit, bytes,
words or fields for zero values. ..." [SPC-4 rev 9]
I haven't seen anywhere that says that a recipient may
crash and burn if it receives a non zero value in
a reserved field.
That suggests to me that the ATAPI drive (TORiSAN) should
be black listed.
> Maybe the SG_IO author has better idea (ccing Doug)?
Filtering is madness. We can have:
- ATA commands passing through SCSI commands
- encapsulated SCSI commands (security freaks)
- and of course vendor specific commands
to name a few.
Setting the EVPD bit is to fetch VPD pages (and the
failure shown in this thread is an attempt to fetch
a list of supported VPD pages). The device identification
VPD page (0x83) is very important in FCP, SAS, SAT.
ATA8-ACS allocates 8 bytes in its IDENTIFY DEVICE response
for a wwn. Not sure if any wwn has been proposed for ATAPI
devices.
> BTW, in addition to the AOpen "INQUIRY with EVPD" problem, we have
> another imperfect ATAPI drive (TORiSAN) that freezes when "READ >= 128KB".
> (http://bugzilla.kernel.org/show_bug.cgi?id=6710)
>
> We can limit "dev->max_sectors" to workaround the TORiSAN problem.
> But I don't know whether "dev->max_sectors" also works for SG_IO?
> If no, some user space application, unaware of the problem,
> might send a "correct" READ that locks the drive completely.
Currently only SCSI subsystem LLDs set max_sectors
(although libata might). Can it be set via sysfs?
Recent versions of the sg driver honour max_sectors
and the block layer SG_IO ioctl implementation always
has.
SCSI direct access devices (i.e. SCSI disks) have a VPD
page that supplies block limit (and optimal) values
for data transfers. Linux doesn't currently ask that
particular question. Of course the standard that defines
block limits also defines an error response if it is
exceeded.
Doug Gilbert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-19 12:10 ` Sergei Shtylyov
2007-03-19 19:35 ` YUP
2007-03-19 23:02 ` YUP
@ 2007-03-23 22:13 ` Bartlomiej Zolnierkiewicz
2007-03-26 5:53 ` Albert Lee
2 siblings, 1 reply; 47+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-03-23 22:13 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: YUP, albertl, linux-ide
Hi,
On Monday 19 March 2007, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
>
> > It seems that the drive works just fine in PIO mode with pdc202xx_new
> > IDE driver (it doesn't support ATAPI DMA at the moment)
>
> There used to be Albert's patch enabling ATAPIT DMA in this driver:
>
> http://marc.info/?l=linux-ide&m=111027913608663
applied
> Oh my, that was 2 years ago, and all slipped thru the cracks... :-)
f*ck, indeed and it seems I'm to blame here... :-(
Albert, I want to apologize for losing your patch.
Bart
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-23 15:19 ` Douglas Gilbert
@ 2007-03-26 5:50 ` Albert Lee
0 siblings, 0 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-26 5:50 UTC (permalink / raw)
To: dougg
Cc: albertl, Alan Cox, YUP, Bartlomiej Zolnierkiewicz, linux-ide,
Sergei Shtylyov, Jeff Garzik
Douglas Gilbert wrote:
> Albert Lee wrote:
>
>>Alan Cox wrote:
>>
>>>>We have two possible solutions here:
>>>>a. Patch Ubuntu, such that the incorrect INQUIRY is fixed.
>>>>b. Patch kernel, such that the AOpen drives are blacklisted.
>>>> Each INQUIRY is inspected for the blacklisted drives.
>>>> If the INQUIRY looks wrong, the INQUIRY is rejected.
>>>>
>>>>I guess a. is the preferred solution...
>>>
>>>We have two problems here
>>>
>>>#1 Ubuntu got the inquiry command wrong
>>>
>>>#2 Until now we considered "INQUIRY" a safe command for SG_IO passthrough.
>>>
>>>We can't really take INQUIRY out of SG_IO so do we decide its the
>>>hardware vendors problem or do something cleverer in the filters ?
>
>
> Albert,
> "Definitions:
> ....
> Reserved: A keyword referring to bits, bytes, words, fields
> and code values set aside for future standardization. A
> reserved bit, byte, word or field shall be set to zero, or
> in accordance with a future version to this standard.
> Recipients are not required to check reserved bit, bytes,
> words or fields for zero values. ..." [SPC-4 rev 9]
>
> I haven't seen anywhere that says that a recipient may
> crash and burn if it receives a non zero value in
> a reserved field.
>
Thanks for the advice (also Sergei and Alan's). Yurema did
more test on the Aopen 56X/AKH and it seems has trouble with
other commands, too. (It also chokes on GET_CONFIGURATION, etc.
during request sense.) Agreed it's the drive/firmware problem,
not the reserved EVPD bit nor Ubuntu/hald/scsi_id's fault.
Maybe the best fix is firmware update. I will ask AOpen about
any firmware update available for it.
> That suggests to me that the ATAPI drive (TORiSAN) should
> be black listed.
It's the AOpen 56X/AKH drive that chokes on INQUIRY with EVPD=1.
The TORiSAN drive has another ATAPI DMA problem and max_sector
limitation. Sorry for the mix-up.
>
>
>>Maybe the SG_IO author has better idea (ccing Doug)?
>
>
> Filtering is madness. We can have:
> - ATA commands passing through SCSI commands
> - encapsulated SCSI commands (security freaks)
> - and of course vendor specific commands
>
> to name a few.
>
> Setting the EVPD bit is to fetch VPD pages (and the
> failure shown in this thread is an attempt to fetch
> a list of supported VPD pages). The device identification
> VPD page (0x83) is very important in FCP, SAS, SAT.
> ATA8-ACS allocates 8 bytes in its IDENTIFY DEVICE response
> for a wwn. Not sure if any wwn has been proposed for ATAPI
> devices.
>
>
>>BTW, in addition to the AOpen "INQUIRY with EVPD" problem, we have
>>another imperfect ATAPI drive (TORiSAN) that freezes when "READ >= 128KB".
>>(http://bugzilla.kernel.org/show_bug.cgi?id=6710)
>>
>>We can limit "dev->max_sectors" to workaround the TORiSAN problem.
>>But I don't know whether "dev->max_sectors" also works for SG_IO?
>>If no, some user space application, unaware of the problem,
>>might send a "correct" READ that locks the drive completely.
>
>
> Currently only SCSI subsystem LLDs set max_sectors
> (although libata might). Can it be set via sysfs?
> Recent versions of the sg driver honour max_sectors
> and the block layer SG_IO ioctl implementation always
> has.
It's good to know that the sg driver honors max_sectors.
So, my previous concern about user space app might send commands with
invalid max_sect that kills the TORiSAN drive is solved. :)
>
> SCSI direct access devices (i.e. SCSI disks) have a VPD
> page that supplies block limit (and optimal) values
> for data transfers. Linux doesn't currently ask that
> particular question. Of course the standard that defines
> block limits also defines an error response if it is
> exceeded.
>
Thanks,
Albert
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: libata: CD and dvd devices not recognized
2007-03-23 22:13 ` Bartlomiej Zolnierkiewicz
@ 2007-03-26 5:53 ` Albert Lee
0 siblings, 0 replies; 47+ messages in thread
From: Albert Lee @ 2007-03-26 5:53 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: Sergei Shtylyov, YUP, albertl, linux-ide
Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> On Monday 19 March 2007, Sergei Shtylyov wrote:
>
>>Hello.
>>
>>Bartlomiej Zolnierkiewicz wrote:
>>
>>
>>>It seems that the drive works just fine in PIO mode with pdc202xx_new
>>>IDE driver (it doesn't support ATAPI DMA at the moment)
>>
>> There used to be Albert's patch enabling ATAPIT DMA in this driver:
>>
>> http://marc.info/?l=linux-ide&m=111027913608663
>
>
> applied
Great, thanks Bart.
>
>
>>Oh my, that was 2 years ago, and all slipped thru the cracks... :-)
>
>
> f*ck, indeed and it seems I'm to blame here... :-(
>
> Albert, I want to apologize for losing your patch.
>
It's nice we have the IDE maintainer back. :)
--
albert
^ permalink raw reply [flat|nested] 47+ messages in thread
end of thread, other threads:[~2007-03-26 5:53 UTC | newest]
Thread overview: 47+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-14 22:14 libata: CD and dvd devices not recognized YUP
2007-03-15 3:56 ` Albert Lee
2007-03-15 13:11 ` YUP
2007-03-15 17:32 ` Albert Lee
2007-03-16 10:16 ` YUP
2007-03-16 15:06 ` Albert Lee
2007-03-16 15:50 ` YUP
2007-03-17 13:29 ` Bartlomiej Zolnierkiewicz
2007-03-17 14:39 ` Albert Lee
2007-03-17 15:00 ` Bartlomiej Zolnierkiewicz
2007-03-17 18:38 ` YUP
2007-03-17 18:47 ` YUP
2007-03-17 19:12 ` Bartlomiej Zolnierkiewicz
2007-03-17 19:22 ` YUP
2007-03-17 20:07 ` Bartlomiej Zolnierkiewicz
2007-03-18 10:07 ` YUP
2007-03-18 15:10 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:22 ` YUP
2007-03-18 15:54 ` Bartlomiej Zolnierkiewicz
2007-03-18 15:49 ` YUP
2007-03-18 22:48 ` YUP
2007-03-19 3:31 ` Albert Lee
2007-03-19 8:22 ` YUP
2007-03-19 8:29 ` Albert Lee
2007-03-19 12:10 ` Sergei Shtylyov
2007-03-19 19:35 ` YUP
2007-03-20 7:27 ` Albert Lee
2007-03-20 9:07 ` Albert Lee
2007-03-21 4:52 ` Albert Lee
2007-03-21 9:01 ` YUP
2007-03-22 6:06 ` Albert Lee
2007-03-22 7:09 ` Tejun Heo
2007-03-22 12:37 ` Alan Cox
2007-03-23 3:40 ` Albert Lee
2007-03-23 15:19 ` Douglas Gilbert
2007-03-26 5:50 ` Albert Lee
2007-03-22 14:50 ` Sergei Shtylyov
2007-03-23 3:21 ` Albert Lee
2007-03-19 23:02 ` YUP
2007-03-20 15:23 ` Sergei Shtylyov
2007-03-23 22:13 ` Bartlomiej Zolnierkiewicz
2007-03-26 5:53 ` Albert Lee
2007-03-18 6:42 ` YUP
2007-03-16 22:37 ` YUP
2007-03-17 3:24 ` Albert Lee
2007-03-17 9:09 ` YUP
2007-03-17 10:51 ` Albert Lee
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).