From mboxrd@z Thu Jan 1 00:00:00 1970 From: Craig Metz Subject: Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip Date: Wed, 25 Apr 2007 22:35:33 -0400 Message-ID: <20070426023534.68007582C@rmail.inner.net> References: <010501c78736$aad2e480$0703a8c0@SJAWINXP> Return-path: Received: from rmail.inner.net ([199.33.248.12]:3497 "EHLO rmail.inner.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754680AbXDZCYT (ORCPT ); Wed, 25 Apr 2007 22:24:19 -0400 In-reply-to: <010501c78736$aad2e480$0703a8c0@SJAWINXP> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "Steven J. Ackerman" Cc: linux-ide@vger.kernel.org, htejun@gmail.com In message <010501c78736$aad2e480$0703a8c0@SJAWINXP>, you write: >> Here are the Linux Kernel error messages that are produced by this >> kernel running on a Intel D865GLC motherboard trying to talk to our >> ARC-770 based adaptor on SATA-0 : >> >> ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 10 >> scsi2 : ata_piix ata1.00: CFA, max PIO4, 8005536 sectors: LBA >> ata1.00: ata1: dev 0 multi count 0 ata1.00: qc timeout (cmd 0xef) >> ata1.00: failed to set xfermode (err_mask=0x4) > >Can you give a shot at 2.6.21-rc7. The problem should have been fixed >there. I am also having problems with this device, but on both an ICH5 and on a VIA pre-AHCI SATA controller. I just tried 2.6.21-rc7 - it fails in exactly the same way as with 2.6.20. -Craig