From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 7/15] ide: drop "PIO data" argument from ide_get_best_pio_mode()
Date: Sat, 30 Jun 2007 21:05:20 +0200 [thread overview]
Message-ID: <200706302105.20596.bzolnier@gmail.com> (raw)
* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode()
and convert all users accordingly.
* Remove no longer needed ide_pio_data_t.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-lib.c | 6 +-----
drivers/ide/legacy/ali14xx.c | 2 +-
drivers/ide/legacy/dtc2278.c | 2 +-
drivers/ide/legacy/ht6560b.c | 2 +-
drivers/ide/legacy/qd65xx.c | 2 +-
drivers/ide/legacy/umc8672.c | 2 +-
drivers/ide/mips/au1xxx-ide.c | 2 +-
drivers/ide/pci/aec62xx.c | 2 +-
drivers/ide/pci/alim15x3.c | 3 +--
drivers/ide/pci/atiixp.c | 2 +-
drivers/ide/pci/cmd640.c | 2 +-
drivers/ide/pci/cmd64x.c | 2 +-
drivers/ide/pci/cs5520.c | 2 +-
drivers/ide/pci/cs5530.c | 2 +-
drivers/ide/pci/cs5535.c | 6 +++---
drivers/ide/pci/cy82c693.c | 2 +-
drivers/ide/pci/hpt34x.c | 2 +-
drivers/ide/pci/hpt366.c | 2 +-
drivers/ide/pci/it8213.c | 4 ++--
drivers/ide/pci/it821x.c | 4 ++--
drivers/ide/pci/jmicron.c | 2 +-
drivers/ide/pci/opti621.c | 4 ++--
drivers/ide/pci/pdc202xx_new.c | 2 +-
drivers/ide/pci/pdc202xx_old.c | 2 +-
drivers/ide/pci/piix.c | 2 +-
drivers/ide/pci/sc1200.c | 2 +-
drivers/ide/pci/scc_pata.c | 2 +-
drivers/ide/pci/serverworks.c | 2 +-
drivers/ide/pci/siimage.c | 4 ++--
drivers/ide/pci/sis5513.c | 2 +-
drivers/ide/pci/sl82c105.c | 2 +-
drivers/ide/pci/slc90e66.c | 2 +-
drivers/ide/pci/tc86c001.c | 2 +-
drivers/ide/pci/triflex.c | 2 +-
drivers/ide/ppc/mpc8xx.c | 3 +--
drivers/ide/ppc/pmac.c | 2 +-
include/linux/ide.h | 6 +-----
37 files changed, 43 insertions(+), 53 deletions(-)
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -277,7 +277,6 @@ EXPORT_SYMBOL_GPL(ata_pio_cycle_time);
* @drive: drive to consider
* @mode_wanted: preferred mode
* @max_mode: highest allowed mode
- * @d: PIO data
*
* This routine returns the recommended PIO settings for a given drive,
* based on the drive->id information and the ide_pio_blacklist[].
@@ -286,7 +285,7 @@ EXPORT_SYMBOL_GPL(ata_pio_cycle_time);
* This is used by most chipset support modules when "auto-tuning".
*/
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
+u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
int pio_mode;
struct hd_driveid* id = drive->id;
@@ -335,9 +334,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
if (pio_mode > max_mode)
pio_mode = max_mode;
- if (d)
- d->pio_mode = pio_mode;
-
return pio_mode;
}
Index: b/drivers/ide/legacy/ali14xx.c
===================================================================
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -117,7 +117,7 @@ static void ali14xx_tune_drive (ide_driv
unsigned long flags;
int bus_speed = system_bus_clock();
- pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);
/* calculate timing, according to PIO mode */
time1 = ata_pio_cycle_time(drive, pio);
Index: b/drivers/ide/legacy/dtc2278.c
===================================================================
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -71,7 +71,7 @@ static void tune_dtc2278 (ide_drive_t *d
{
unsigned long flags;
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
if (pio >= 3) {
spin_lock_irqsave(&ide_lock, flags);
Index: b/drivers/ide/legacy/ht6560b.c
===================================================================
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -208,7 +208,7 @@ static u8 ht_pio2timings(ide_drive_t *dr
if (pio) {
unsigned int cycle_time;
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
cycle_time = ata_pio_cycle_time(drive, pio);
/*
Index: b/drivers/ide/legacy/qd65xx.c
===================================================================
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -258,7 +258,7 @@ static void qd6580_tune_drive (ide_drive
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ata_pio_cycle_time(drive, pio);
switch (pio) {
Index: b/drivers/ide/legacy/umc8672.c
===================================================================
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -110,7 +110,7 @@ static void tune_umc (ide_drive_t *drive
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
spin_lock_irqsave(&ide_lock, flags);
Index: b/drivers/ide/mips/au1xxx-ide.c
===================================================================
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -106,7 +106,7 @@ static void auide_tune_drive(ide_drive_t
u8 speed;
/* get the best pio mode for the drive */
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
drive->name, pio);
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -142,7 +142,7 @@ static int aec6260_tune_chipset (ide_dri
static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
Index: b/drivers/ide/pci/alim15x3.c
===================================================================
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -295,7 +295,6 @@ static int ali_get_info (char *buffer, c
static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
int s_time, a_time, c_time;
@@ -307,7 +306,7 @@ static u8 ali15x3_tune_pio (ide_drive_t
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
- pio = ide_get_best_pio_mode(drive, pio, 5, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -155,7 +155,7 @@ static void atiixp_tune_pio(ide_drive_t
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -661,7 +661,7 @@ static void cmd640_tune_drive (ide_drive
return;
}
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ata_pio_cycle_time(drive, mode_wanted);
cmd640_set_mode(index, mode_wanted, cycle_time);
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -228,7 +228,7 @@ static u8 cmd64x_tune_pio (ide_drive_t *
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ata_pio_cycle_time(drive, pio_mode);
cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
Index: b/drivers/ide/pci/cs5520.c
===================================================================
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -126,7 +126,7 @@ static int cs5520_tune_chipset(ide_drive
static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
}
Index: b/drivers/ide/pci/cs5530.c
===================================================================
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -82,7 +82,7 @@ static void cs5530_tunepio(ide_drive_t *
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
Index: b/drivers/ide/pci/cs5535.c
===================================================================
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -89,7 +89,7 @@ static void cs5535_set_speed(ide_drive_t
pioa = speed - XFER_PIO_0;
piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
- 255, 4, NULL);
+ 255, 4);
cmd = pioa < piob ? pioa : piob;
/* Write the speed of the current drive */
@@ -159,7 +159,7 @@ static void cs5535_tuneproc(ide_drive_t
/* cs5535 max pio is pio 4, best_pio will check the blacklist.
i think we don't need to rate_filter the incoming xferspeed
since we know we're only going to choose pio */
- xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
+ xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4);
ide_config_drive_speed(drive, modes[xferspeed]);
cs5535_set_speed(drive, xferspeed);
}
@@ -174,7 +174,7 @@ static int cs5535_dma_check(ide_drive_t
return 0;
if (ide_use_fast_pio(drive)) {
- speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ speed = ide_get_best_pio_mode(drive, 255, 4);
cs5535_set_drive(drive, speed);
}
Index: b/drivers/ide/pci/cy82c693.c
===================================================================
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -330,7 +330,7 @@ static void cy82c693_tune_drive (ide_dri
#endif /* CY82C693_DEBUG_LOGS */
/* first let's calc the pio modes */
- pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
Index: b/drivers/ide/pci/hpt34x.c
===================================================================
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -80,7 +80,7 @@ static int hpt34x_tune_chipset (ide_driv
static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -652,7 +652,7 @@ static int hpt3xx_tune_chipset(ide_drive
static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/it8213.c
===================================================================
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -82,7 +82,7 @@ static void it8213_tuneproc (ide_drive_t
{ 2, 1 },
{ 2, 3 }, };
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
@@ -214,7 +214,7 @@ static int it8213_config_drive_for_dma (
if (ide_tune_dma(drive))
return 0;
- pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, 255, 4);
it8213_tune_chipset(drive, XFER_PIO_0 + pio);
return -1;
Index: b/drivers/ide/pci/it821x.c
===================================================================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -255,7 +255,7 @@ static int it821x_tunepio(ide_drive_t *d
* on the cable.
*/
if (pair) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
/* trim PIO to the slowest of the master/slave */
if (pair_pio < set_pio)
set_pio = pair_pio;
@@ -276,7 +276,7 @@ static int it821x_tunepio(ide_drive_t *d
static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
Index: b/drivers/ide/pci/jmicron.c
===================================================================
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -97,7 +97,7 @@ static void jmicron_tuneproc (ide_drive_
static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
- u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
+ u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5);
if (set_speed)
(void) ide_config_drive_speed(drive, speed);
}
Index: b/drivers/ide/pci/opti621.c
===================================================================
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -147,12 +147,12 @@ static void compute_pios(ide_drive_t *dr
int d;
ide_hwif_t *hwif = HWIF(drive);
- drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO, NULL);
+ drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO, NULL);
+ drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
Index: b/drivers/ide/pci/pdc202xx_new.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -219,7 +219,7 @@ static int pdcnew_tune_chipset(ide_drive
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -145,7 +145,7 @@ static int pdc202xx_tune_chipset (ide_dr
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -219,7 +219,7 @@ static void piix_tune_pio (ide_drive_t *
*/
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -304,7 +304,7 @@ static void sc1200_tuneproc (ide_drive_t
return;
}
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -210,7 +210,7 @@ static void scc_tuneproc(ide_drive_t *dr
unsigned char speed = XFER_PIO_0;
int offset;
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4);
switch (mode_wanted) {
case 4:
speed = XFER_PIO_4;
Index: b/drivers/ide/pci/serverworks.c
===================================================================
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -209,7 +209,7 @@ static int svwks_tune_chipset (ide_drive
static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -189,7 +189,7 @@ static void sil_tune_pio(ide_drive_t *dr
/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair->present) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
if (pair_pio < tf_pio)
tf_pio = pair_pio;
@@ -221,7 +221,7 @@ static void sil_tune_pio(ide_drive_t *dr
static void sil_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -521,7 +521,7 @@ static void config_art_rwp_pio (ide_driv
static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -83,7 +83,7 @@ static u8 sl82c105_tune_pio(ide_drive_t
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
drv_ctrl = get_pio_timings(drive, pio);
Index: b/drivers/ide/pci/slc90e66.c
===================================================================
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -103,7 +103,7 @@ static void slc90e66_tune_pio (ide_drive
static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/tc86c001.c
===================================================================
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -47,7 +47,7 @@ static int tc86c001_tune_chipset(ide_dri
static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
Index: b/drivers/ide/pci/triflex.c
===================================================================
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -96,7 +96,7 @@ static int triflex_tune_chipset(ide_driv
static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
{
- int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ int use_pio = ide_get_best_pio_mode(drive, pio, 4);
(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
}
Index: b/drivers/ide/ppc/mpc8xx.c
===================================================================
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -431,13 +431,12 @@ void m8xx_ide_init_hwif_ports (hw_regs_t
static void
m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
volatile pcmconf8xx_t *pcmp;
ulong timing, mask, reg;
#endif
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
#if 1
printk("%s[%d] %s: best PIO mode: %d\n",
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -627,7 +627,7 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ata_pio_cycle_time(drive, pio);
switch (pmif->kind) {
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1377,12 +1377,8 @@ typedef struct ide_pio_timings_s {
/* active + recovery (+ setup for some chips) */
} ide_pio_timings_t;
-typedef struct ide_pio_data_s {
- u8 pio_mode;
-} ide_pio_data_t;
-
unsigned int ata_pio_cycle_time(ide_drive_t *, u8);
-extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
next reply other threads:[~2007-06-30 19:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-30 19:05 Bartlomiej Zolnierkiewicz [this message]
2007-07-02 17:41 ` [PATCH 7/15] ide: drop "PIO data" argument from ide_get_best_pio_mode() Sergei Shtylyov
2007-07-02 18:14 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706302105.20596.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).