From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 8/15] ide: remove ide_find_best_pio_mode()
Date: Sat, 30 Jun 2007 21:06:01 +0200 [thread overview]
Message-ID: <200706302106.01458.bzolnier@gmail.com> (raw)
* Add ->host_flags to ide_hwif_t to store ide_pci_device_t.host_flags,
assign it in setup-pci.c:ide_pci_setup_ports().
* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags
and teach ide_get_best_pio_mode() about them. Also remove needless
!drive->id check while at it (drive->id is always present).
* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()
and then remove no longer needed ide_find_best_pio_mode().
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-lib.c | 13 +++++++------
drivers/ide/ide-timing.h | 18 ++----------------
drivers/ide/ide.c | 2 ++
drivers/ide/pci/amd74xx.c | 20 ++++++++++++--------
drivers/ide/pci/via82cxxx.c | 22 +++++++++++++---------
drivers/ide/setup-pci.c | 2 ++
include/linux/ide.h | 7 +++++++
7 files changed, 45 insertions(+), 39 deletions(-)
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -291,11 +291,11 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
struct hd_driveid* id = drive->id;
int overridden = 0;
- if (mode_wanted != 255) {
- pio_mode = mode_wanted;
- } else if (!drive->id) {
- pio_mode = 0;
- } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
+ if (mode_wanted != 255)
+ return min_t(u8, mode_wanted, max_mode);
+
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 &&
+ (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
} else {
pio_mode = id->tPIO;
@@ -324,7 +324,8 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
/*
* Conservative "downgrade" for all pre-ATA2 drives
*/
- if (pio_mode && pio_mode < 4) {
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 &&
+ pio_mode && pio_mode < 4) {
pio_mode--;
printk(KERN_INFO "%s: applying conservative "
"PIO \"downgrade\"\n", drive->name);
Index: b/drivers/ide/ide-timing.h
===================================================================
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -106,21 +106,6 @@ static struct ide_timing ide_timing[] =
#define XFER_EPIO 0x01
#define XFER_PIO 0x00
-static short ide_find_best_pio_mode(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- short best = 0;
-
- /* EIDE PIO modes */
- if ((id->field_valid & 2) && (id->capability & 8)) {
- if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 :
- (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 :
- (drive->id->eide_pio_modes & 1) ? XFER_PIO_3 : 0)) return best;
- }
-
- return min_t(u8, id->tPIO, 2);
-}
-
static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT)
{
q->setup = EZ(t->setup * 1000, T);
@@ -210,7 +195,8 @@ static int ide_timing_compute(ide_drive_
*/
if ((speed & XFER_MODE) != XFER_PIO) {
- ide_timing_compute(drive, ide_find_best_pio_mode(drive), &p, T, UT);
+ u8 pio = ide_get_best_pio_mode(drive, 255, 5);
+ ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
}
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -455,6 +455,8 @@ static void ide_hwif_restore(ide_hwif_t
hwif->straight8 = tmp_hwif->straight8;
hwif->bus_state = tmp_hwif->bus_state;
+ hwif->host_flags = tmp_hwif->host_flags;
+
hwif->atapi_dma = tmp_hwif->atapi_dma;
hwif->ultra_mask = tmp_hwif->ultra_mask;
hwif->mwdma_mask = tmp_hwif->mwdma_mask;
Index: b/drivers/ide/pci/amd74xx.c
===================================================================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,5 +1,5 @@
/*
- * Version 2.20
+ * Version 2.21
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
@@ -275,10 +275,8 @@ static int amd_set_drive(ide_drive_t *dr
static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255) {
- amd_set_drive(drive, ide_find_best_pio_mode(drive));
- return;
- }
+ if (pio == 255)
+ pio = ide_get_best_pio_mode(drive, 255, 5);
amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
}
@@ -287,12 +285,14 @@ static int amd74xx_ide_dma_check(ide_dri
{
u8 speed = ide_max_dma_mode(drive);
- if (speed == 0)
- speed = ide_find_best_pio_mode(drive);
+ if (speed == 0) {
+ amd74xx_tune_drive(drive, 255);
+ return -1;
+ }
amd_set_drive(drive, speed);
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ if (drive->autodma)
return 0;
return -1;
@@ -455,6 +455,8 @@ static void __devinit init_hwif_amd74xx(
.autodma = AUTODMA, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
+ | IDE_HFLAG_PIO_NO_DOWNGRADE, \
}
#define DECLARE_NV_DEV(name_str) \
@@ -465,6 +467,8 @@ static void __devinit init_hwif_amd74xx(
.autodma = AUTODMA, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
+ | IDE_HFLAG_PIO_NO_DOWNGRADE, \
}
static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
Index: b/drivers/ide/pci/via82cxxx.c
===================================================================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,6 +1,6 @@
/*
*
- * Version 3.45
+ * Version 3.46
*
* VIA IDE driver for Linux. Supported southbridges:
*
@@ -203,10 +203,8 @@ static int via_set_drive(ide_drive_t *dr
static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255) {
- via_set_drive(drive, ide_find_best_pio_mode(drive));
- return;
- }
+ if (pio == 255)
+ pio = ide_get_best_pio_mode(drive, 255, 5);
via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
}
@@ -223,12 +221,14 @@ static int via82cxxx_ide_dma_check (ide_
{
u8 speed = ide_max_dma_mode(drive);
- if (speed == 0)
- speed = ide_find_best_pio_mode(drive);
+ if (speed == 0) {
+ via82cxxx_tune_drive(drive, 255);
+ return -1;
+ }
via_set_drive(drive, speed);
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ if (drive->autodma)
return 0;
return -1;
@@ -503,7 +503,9 @@ static ide_pci_device_t via82cxxx_chipse
.init_hwif = init_hwif_via82cxxx,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
- .bootable = ON_BOARD
+ .bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
+ | IDE_HFLAG_PIO_NO_DOWNGRADE,
},{ /* 1 */
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
@@ -511,6 +513,8 @@ static ide_pci_device_t via82cxxx_chipse
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
+ | IDE_HFLAG_PIO_NO_DOWNGRADE,
}
};
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -613,6 +613,8 @@ void ide_pci_setup_ports(struct pci_dev
else
ide_hwif_setup_dma(dev, d, hwif);
bypass_legacy_dma:
+ hwif->host_flags = d->host_flags;
+
if (d->init_hwif)
/* Call chipset-specific routine
* for each enabled hwif
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -681,6 +681,8 @@ typedef struct hwif_s {
u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
+ u8 host_flags;
+
u8 atapi_dma; /* host supports atapi_dma */
u8 ultra_mask;
u8 mwdma_mask;
@@ -1245,7 +1247,12 @@ typedef struct ide_pci_enablebit_s {
enum {
/* Uses ISA control ports not PCI ones. */
IDE_HFLAG_ISA_PORTS = (1 << 0),
+ /* single port device */
IDE_HFLAG_SINGLE = (1 << 1),
+ /* don't use legacy PIO blacklist */
+ IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
+ /* don't use conservative PIO "downgrade" */
+ IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3),
};
typedef struct ide_pci_device_s {
next reply other threads:[~2007-06-30 19:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-30 19:06 Bartlomiej Zolnierkiewicz [this message]
2007-07-03 20:20 ` [PATCH 8/15] ide: remove ide_find_best_pio_mode() Sergei Shtylyov
2007-07-03 21:38 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706302106.01458.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).