From: Jim Paris <jim@jtan.com>
To: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Subject: Re: [PATCHSET 4/4] implement PMP support, take 4
Date: Tue, 3 Jul 2007 15:40:12 -0400 [thread overview]
Message-ID: <20070703194012.GA20608@jim.sh> (raw)
In-Reply-To: <468A1808.6070303@gmail.com>
Tejun Heo wrote:
> Jim Paris wrote:
> > Tejun Heo wrote:
> > > * Sil4726 is a bit too quirky. Without the first fan-out port
> > > occupied, the thing acts really weirdly. As long as the first port
> > > is occupied, it works okay.
> >
> > I'll test the 4726 behavior with pulling disks etc including the first
> > port. I'll also search to see if I can find a Windows machine to
> > update the firmware and let you know how things change.
Hi Tejun,
I tested some hotplug and didn't any problems at all. I did:
Unplugged ata1.02
Plugged ata1.02
Unplugged ata1.00
Unplugged ata1.03
Plugged ata1.03
Turned off enclosure entirely
Turned on enclosure
Plugged ata1.00
In all cases, all attached disks were correctly recognized. The log
is appended below. I didn't bother trying to update the firmware
since it seems to be working just fine.
> If the Config Disk device can't stand IDENTIFY. I suppose we're better
> off disabling last two ports on r0. I'll ask SIMG about it and add
> quirks for r0.
OK, I'll gladly test anything you come up with.
Thanks,
-jim
[ 53.323077] ata1.15: Port Multiplier 1.1, 0x1095:0x4726 r0, 6 ports, feat 0x9/0xb
Unplugged ata1.02:
[ 685.221846] ata1.02: hard resetting link
[ 686.201127] ata1.02: SATA link down (SStatus 0 SControl 300)
[ 686.217114] ata1: failed to recover some devices, retrying in 5 secs
[ 691.233422] ata1.02: hard resetting link
[ 691.797006] ata1.02: SATA link down (SStatus 0 SControl 300)
[ 691.828983] ata1.02: limiting SATA link speed to 1.5 Gbps
[ 691.829034] ata1.02: limiting speed to UDMA/100:PIO3
[ 691.829086] ata1: failed to recover some devices, retrying in 5 secs
[ 696.849287] ata1.02: hard resetting link
[ 697.480821] ata1.02: SATA link down (SStatus 0 SControl 310)
[ 697.496808] ata1.02: disabled
[ 698.032416] ata1.02: hard resetting link
[ 698.663364] ata1.02: SATA link down (SStatus 0 SControl 300)
[ 698.679354] ata1: EH complete
[ 698.679979] ata1.02: detaching (SCSI 0:0:2:0)
[ 698.680241] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[ 698.680422] sd 0:0:2:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 698.680511] sd 0:0:2:0: [sdc] Stopping disk
[ 698.680559] sd 0:0:2:0: [sdc] START_STOP FAILED
[ 698.680604] sd 0:0:2:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Plugged ata1.02:
[ 711.466523] ata1.02: hard resetting link
[ 720.807647] ata1.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 720.852090] ata1.02: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 720.852142] ata1.02: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 720.924577] ata1.02: configured for UDMA/100
[ 720.939552] ata1: EH complete
[ 720.939878] scsi 0:0:2:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 720.940104] sd 0:0:2:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[ 720.940161] sd 0:0:2:0: [sdc] Write Protect is off
[ 720.940220] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 720.940328] sd 0:0:2:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[ 720.940382] sd 0:0:2:0: [sdc] Write Protect is off
[ 720.940439] sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 720.940501] sdc: sdc1
[ 720.966807] sd 0:0:2:0: [sdc] Attached SCSI disk
Unplugged ata1.00:
[ 767.021622] ata1.00: hard resetting link
[ 768.000899] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 768.016887] ata1: failed to recover some devices, retrying in 5 secs
[ 773.017199] ata1.00: hard resetting link
[ 773.580790] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 773.612765] ata1.00: limiting SATA link speed to 1.5 Gbps
[ 773.612814] ata1.00: limiting speed to UDMA/100:PIO3
[ 773.612865] ata1: failed to recover some devices, retrying in 5 secs
[ 778.613078] ata1.00: hard resetting link
[ 779.240623] ata1.00: SATA link down (SStatus 0 SControl 310)
[ 779.256610] ata1.00: disabled
[ 779.776220] ata1.00: hard resetting link
[ 780.403767] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 780.419757] ata1: EH complete
[ 780.419813] ata1.00: detaching (SCSI 0:0:0:0)
[ 780.420006] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 780.423967] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 780.424066] sd 0:0:0:0: [sda] Stopping disk
[ 780.424121] sd 0:0:0:0: [sda] START_STOP FAILED
[ 780.424169] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Unplugged ata1.03:
[ 785.512005] ata1.03: hard resetting link
[ 786.491286] ata1.03: SATA link down (SStatus 0 SControl 300)
[ 786.507272] ata1: failed to recover some devices, retrying in 5 secs
[ 791.523581] ata1.03: hard resetting link
[ 792.087166] ata1.03: SATA link down (SStatus 0 SControl 300)
[ 792.119140] ata1.03: limiting SATA link speed to 1.5 Gbps
[ 792.119189] ata1.03: limiting speed to UDMA/100:PIO3
[ 792.119239] ata1: failed to recover some devices, retrying in 5 secs
[ 797.135449] ata1.03: hard resetting link
[ 797.762986] ata1.03: SATA link down (SStatus 0 SControl 310)
[ 797.778973] ata1.03: disabled
[ 798.314580] ata1.03: hard resetting link
[ 798.942118] ata1.03: SATA link down (SStatus 0 SControl 300)
[ 798.958108] ata1: EH complete
[ 798.958163] ata1.03: detaching (SCSI 0:0:3:0)
[ 798.958410] sd 0:0:3:0: [sdd] Synchronizing SCSI cache
[ 798.958585] sd 0:0:3:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 798.958674] sd 0:0:3:0: [sdd] Stopping disk
[ 798.958722] sd 0:0:3:0: [sdd] START_STOP FAILED
[ 798.958767] sd 0:0:3:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Plugged ata1.03:
[ 801.616148] ata1.03: hard resetting link
[ 810.925295] ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 811.327359] ata1.03: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 811.327409] ata1.03: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 811.385625] ata1.03: configured for UDMA/100
[ 811.400946] ata1: EH complete
[ 811.401154] scsi 0:0:3:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 811.401349] sd 0:0:3:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[ 811.401406] sd 0:0:3:0: [sda] Write Protect is off
[ 811.401465] sd 0:0:3:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 811.401569] sd 0:0:3:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[ 811.407812] sd 0:0:3:0: [sda] Write Protect is off
[ 811.407899] sd 0:0:3:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 811.407961] sda: sda1
[ 811.425436] sd 0:0:3:0: [sda] Attached SCSI disk
Turned off the entire enclosure (ata1, ata2, ata5, ata6):
[ 854.744805] ata6: hard resetting link
[ 854.744975] ata5: hard resetting link
[ 856.280406] ata1.15: hard resetting link
[ 856.280954] ata2.15: hard resetting link
[ 856.823499] ata6: SATA link down (SStatus 0 SControl 0)
[ 856.823555] ata6: failed to recover some devices, retrying in 5 secs
[ 856.823614] ata5: SATA link down (SStatus 0 SControl 0)
[ 856.823665] ata5: failed to recover some devices, retrying in 5 secs
[ 858.358371] ata1.15: SATA link down (SStatus 0 SControl 0)
[ 858.358442] ata2.15: SATA link down (SStatus 0 SControl 0)
[ 858.614294] ata1.15: retrying hardreset in 5 secs
[ 858.614464] ata2.15: retrying hardreset in 5 secs
[ 861.823813] ata6: hard resetting link
[ 861.823870] ata5: hard resetting link
[ 863.614493] ata1.15: hard resetting link
[ 863.614552] ata2.15: hard resetting link
[ 863.902286] ata6: SATA link down (SStatus 0 SControl 0)
[ 863.902342] ata6: limiting SATA link speed to 1.5 Gbps
[ 863.902393] ata6.00: limiting speed to UDMA/100:PIO3
[ 863.902440] ata6: failed to recover some devices, retrying in 5 secs
[ 863.902500] ata5: SATA link down (SStatus 0 SControl 0)
[ 863.902551] ata5: limiting SATA link speed to 1.5 Gbps
[ 863.902600] ata5.00: limiting speed to UDMA/100:PIO3
[ 863.902647] ata5: failed to recover some devices, retrying in 5 secs
[ 865.692970] ata1.15: SATA link down (SStatus 0 SControl 0)
[ 865.693041] ata2.15: SATA link down (SStatus 0 SControl 0)
[ 865.948898] ata1.15: limiting SATA link speed to 1.5 Gbps
[ 865.948946] ata1.15: retrying hardreset in 5 secs
[ 865.949120] ata2.15: limiting SATA link speed to 1.5 Gbps
[ 865.949167] ata2.15: retrying hardreset in 5 secs
[ 868.902601] ata6: hard resetting link
[ 868.902658] ata5: hard resetting link
[ 870.953090] ata1.15: hard resetting link
[ 870.953151] ata2.15: hard resetting link
[ 870.985070] ata6: SATA link down (SStatus 0 SControl 10)
[ 870.985125] ata6.00: disabled
[ 870.985181] ata5: SATA link down (SStatus 0 SControl 10)
[ 870.985232] ata5.00: disabled
[ 871.492692] ata6: EH complete
[ 871.492746] ata5: EH complete
[ 871.492798] ata6.00: detaching (SCSI 7:0:0:0)
[ 871.492988] sd 7:0:0:0: [sdr] Synchronizing SCSI cache
[ 871.495331] sd 7:0:0:0: [sdr] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 871.495430] sd 7:0:0:0: [sdr] Stopping disk
[ 871.495698] sd 7:0:0:0: [sdr] START_STOP FAILED
[ 871.495745] sd 7:0:0:0: [sdr] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 871.495911] ata5.00: detaching (SCSI 6:0:0:0)
[ 871.496092] sd 6:0:0:0: [sdq] Synchronizing SCSI cache
[ 871.496400] sd 6:0:0:0: [sdq] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 871.496493] sd 6:0:0:0: [sdq] Stopping disk
[ 871.496671] sd 6:0:0:0: [sdq] START_STOP FAILED
[ 871.496724] sd 6:0:0:0: [sdq] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 873.035564] ata1.15: SATA link down (SStatus 0 SControl 10)
[ 873.035637] ata2.15: SATA link down (SStatus 0 SControl 10)
[ 873.291490] ata1.15: retrying hardreset in 5 secs
[ 873.291663] ata2.15: retrying hardreset in 5 secs
[ 878.291687] ata1.15: hard resetting link
[ 878.295681] ata2.15: hard resetting link
[ 880.370163] ata1.15: SATA link down (SStatus 0 SControl 10)
[ 880.374158] ata2.15: SATA link down (SStatus 0 SControl 10)
[ 880.626087] ata1.15: retrying hardreset in 5 secs
[ 880.630083] ata2.15: retrying hardreset in 5 secs
[ 885.626286] ata1.15: hard resetting link
[ 885.630280] ata2.15: hard resetting link
[ 887.704762] ata1.15: SATA link down (SStatus 0 SControl 10)
[ 887.708757] ata2.15: SATA link down (SStatus 0 SControl 10)
[ 887.960737] ata1.15: Port Multiplier detaching
[ 887.960809] ata1.01: disabled
[ 887.960854] ata1.02: disabled
[ 887.960902] ata1.03: disabled
[ 887.960946] ata1.04: disabled
[ 887.960995] ata1.00: disabled
[ 887.961044] ata1: EH complete
[ 887.961104] ata1.01: detaching (SCSI 0:0:1:0)
[ 887.961302] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[ 887.964553] sd 0:0:1:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.964087] ata2.15: Port Multiplier detaching
[ 887.964111] ata2.00: disabled
[ 887.964115] ata2.01: disabled
[ 887.964117] ata2.02: disabled
[ 887.964119] ata2.03: disabled
[ 887.964121] ata2.04: disabled
[ 887.964124] ata2.00: disabled
[ 887.964130] ata2: EH complete
[ 887.965153] sd 0:0:1:0: [sdb] Stopping disk
[ 887.965784] sd 0:0:1:0: [sdb] START_STOP FAILED
[ 887.965834] sd 0:0:1:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.965991] ata1.02: detaching (SCSI 0:0:2:0)
[ 887.966155] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[ 887.968029] sd 0:0:2:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.968128] sd 0:0:2:0: [sdc] Stopping disk
[ 887.968179] sd 0:0:2:0: [sdc] START_STOP FAILED
[ 887.968225] sd 0:0:2:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.968385] ata1.03: detaching (SCSI 0:0:3:0)
[ 887.968551] sd 0:0:3:0: [sda] Synchronizing SCSI cache
[ 887.968620] sd 0:0:3:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.968714] sd 0:0:3:0: [sda] Stopping disk
[ 887.968764] sd 0:0:3:0: [sda] START_STOP FAILED
[ 887.968812] sd 0:0:3:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.968935] ata1.04: detaching (SCSI 0:0:4:0)
[ 887.969098] sd 0:0:4:0: [sde] Synchronizing SCSI cache
[ 887.969162] sd 0:0:4:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.969255] sd 0:0:4:0: [sde] Stopping disk
[ 887.969303] sd 0:0:4:0: [sde] START_STOP FAILED
[ 887.969352] sd 0:0:4:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.975673] ata2.00: detaching (SCSI 1:0:0:0)
[ 887.975826] sd 1:0:0:0: [sdf] Synchronizing SCSI cache
[ 887.975887] sd 1:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.975979] sd 1:0:0:0: [sdf] Stopping disk
[ 887.976031] sd 1:0:0:0: [sdf] START_STOP FAILED
[ 887.976077] sd 1:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.976201] ata2.01: detaching (SCSI 1:0:1:0)
[ 887.976351] sd 1:0:1:0: [sdg] Synchronizing SCSI cache
[ 887.976412] sd 1:0:1:0: [sdg] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.976505] sd 1:0:1:0: [sdg] Stopping disk
[ 887.976557] sd 1:0:1:0: [sdg] START_STOP FAILED
[ 887.976605] sd 1:0:1:0: [sdg] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.976727] ata2.02: detaching (SCSI 1:0:2:0)
[ 887.976880] sd 1:0:2:0: [sdh] Synchronizing SCSI cache
[ 887.976941] sd 1:0:2:0: [sdh] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.977035] sd 1:0:2:0: [sdh] Stopping disk
[ 887.977083] sd 1:0:2:0: [sdh] START_STOP FAILED
[ 887.977133] sd 1:0:2:0: [sdh] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.977250] ata2.03: detaching (SCSI 1:0:3:0)
[ 887.977401] sd 1:0:3:0: [sdi] Synchronizing SCSI cache
[ 887.977460] sd 1:0:3:0: [sdi] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.977554] sd 1:0:3:0: [sdi] Stopping disk
[ 887.977605] sd 1:0:3:0: [sdi] START_STOP FAILED
[ 887.977651] sd 1:0:3:0: [sdi] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.977779] ata2.04: detaching (SCSI 1:0:4:0)
[ 887.977932] sd 1:0:4:0: [sdj] Synchronizing SCSI cache
[ 887.977993] sd 1:0:4:0: [sdj] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 887.978085] sd 1:0:4:0: [sdj] Stopping disk
[ 887.978135] sd 1:0:4:0: [sdj] START_STOP FAILED
[ 887.978182] sd 1:0:4:0: [sdj] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Turned on the enclosure. ata1.00 is still unplugged:
[ 914.543194] ata6: hard resetting link
[ 914.543595] ata5: hard resetting link
[ 914.769024] ata1: hard resetting link
[ 914.768702] ata2: hard resetting link
[ 916.966675] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 916.967234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 917.110543] ata2.15: Port Multiplier 1.1, 0x1095:0x4726 r0, 6 ports, feat 0x9/0xb
[ 917.111101] ata1.15: Port Multiplier 1.1, 0x1095:0x4726 r0, 6 ports, feat 0x9/0xb
[ 917.222475] ata2.00: hard resetting link
[ 917.223035] ata1.00: hard resetting link
[ 917.786057] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 917.786616] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 917.802043] ata2.01: hard resetting link
[ 917.802603] ata1.01: hard resetting link
[ 924.541684] ata6: hard resetting link
[ 924.541787] ata5: hard resetting link
[ 926.756014] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[ 926.771997] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[ 926.785908] ata5.00: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 926.785957] ata5.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 926.840036] ata6.00: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 926.840085] ata6.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 926.844175] ata5.00: configured for UDMA/100
[ 926.844224] ata5: EH complete
[ 926.844482] scsi 6:0:0:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 926.845662] sd 6:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[ 926.845725] sd 6:0:0:0: [sda] Write Protect is off
[ 926.846006] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 926.846178] sd 6:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[ 926.846234] sd 6:0:0:0: [sda] Write Protect is off
[ 926.846467] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 926.846532] sda: sda1
[ 926.883969] sd 6:0:0:0: [sda] Attached SCSI disk
[ 926.935888] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 926.951868] ata1.02: hard resetting link
[ 927.089749] ata6.00: configured for UDMA/100
[ 927.089804] ata6: EH complete
[ 927.090044] scsi 7:0:0:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 927.091176] sd 7:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[ 927.091246] sd 7:0:0:0: [sdb] Write Protect is off
[ 927.091532] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 927.091709] sd 7:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[ 927.091779] sd 7:0:0:0: [sdb] Write Protect is off
[ 927.091840] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 927.091904] sdb:<6>ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 927.239097] ata2.02: hard resetting link
[ 927.265083] sdb1
[ 927.265218] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 936.408903] ata1.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 936.424890] ata1.03: hard resetting link
[ 936.692139] ata2.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 936.708125] ata2.03: hard resetting link
[ 945.909908] ata1.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 945.925895] ata1.04: hard resetting link
[ 946.017273] ata2.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 946.033259] ata2.04: hard resetting link
[ 955.278454] ata2.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 955.278507] ata2.05: hard resetting link
[ 955.538818] ata1.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 955.538872] ata1.05: hard resetting link
[ 955.842038] ata2.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 955.884453] ata2.00: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 955.884505] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 955.942715] ata2.00: configured for UDMA/100
[ 955.981937] ata2.01: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 955.981986] ata2.01: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.040204] ata2.01: configured for UDMA/100
[ 956.086187] ata2.02: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.086236] ata2.02: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.102401] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 956.144454] ata2.02: configured for UDMA/100
[ 956.145604] ata1.01: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.145653] ata1.01: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.188834] ata2.03: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.188882] ata2.03: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.203868] ata1.01: configured for UDMA/100
[ 956.243730] ata1.02: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.243778] ata1.02: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.247100] ata2.03: configured for UDMA/100
[ 956.288708] ata2.04: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.288757] ata2.04: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.316179] ata1.02: configured for UDMA/100
[ 956.346974] ata2.04: configured for UDMA/100
[ 956.347150] ata2.05: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 956.347199] ata2: failed to recover some devices, retrying in 5 secs
[ 956.353522] ata1.03: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.353571] ata1.03: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.411786] ata1.03: configured for UDMA/100
[ 956.457105] ata1.04: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 956.457154] ata1.04: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 956.515370] ata1.04: configured for UDMA/100
[ 956.515540] ata1.05: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 956.515588] ata1: failed to recover some devices, retrying in 5 secs
[ 961.346535] ata2.05: hard resetting link
[ 961.514408] ata1.05: hard resetting link
[ 961.910126] ata2.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 962.019086] ata2.00: configured for UDMA/100
[ 962.078001] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 962.124914] ata2.01: configured for UDMA/100
[ 962.180368] ata1.01: configured for UDMA/100
[ 962.229307] ata2.02: configured for UDMA/100
[ 962.286784] ata1.02: configured for UDMA/100
[ 962.331715] ata2.03: configured for UDMA/100
[ 962.388299] ata1.03: configured for UDMA/100
[ 962.431532] ata2.04: configured for UDMA/100
[ 962.431706] ata2.05: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 962.445730] ata2.05: limiting SATA link speed to 1.5 Gbps
[ 962.445778] ata2.05: limiting speed to UDMA7:PIO5
[ 962.445829] ata2: failed to recover some devices, retrying in 5 secs
[ 962.491902] ata1.04: configured for UDMA/100
[ 962.492073] ata1.05: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 962.509683] ata1.05: limiting SATA link speed to 1.5 Gbps
[ 962.509733] ata1.05: limiting speed to UDMA7:PIO5
[ 962.509783] ata1: failed to recover some devices, retrying in 5 secs
[ 967.446044] ata2.05: hard resetting link
[ 967.509994] ata1.05: hard resetting link
[ 968.073589] ata2.05: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 968.073782] ata2.05: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 968.073831] ata2: failed to recover some devices, retrying in 5 secs
[ 968.137539] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 968.137715] ata1.05: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 968.137764] ata1: failed to recover some devices, retrying in 5 secs
[ 973.073899] ata2.05: hard resetting link
[ 973.141846] ata1.05: hard resetting link
[ 973.637490] ata2.05: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 973.653479] ata2: EH pending after completion, repeating EH (cnt=4)
[ 973.705439] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 973.721431] ata1: EH pending after completion, repeating EH (cnt=4)
[ 973.781385] ata2: EH complete
[ 973.781599] scsi 1:0:0:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.782745] sd 1:0:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[ 973.782808] sd 1:0:0:0: [sdc] Write Protect is off
[ 973.783091] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.783266] sd 1:0:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[ 973.783322] sd 1:0:0:0: [sdc] Write Protect is off
[ 973.783596] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.783661] sdc: sdc1
[ 973.803836] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 973.804799] scsi 1:0:1:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.806206] sd 1:0:1:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[ 973.806279] sd 1:0:1:0: [sdd] Write Protect is off
[ 973.806567] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.806741] sd 1:0:1:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[ 973.806798] sd 1:0:1:0: [sdd] Write Protect is off
[ 973.807036] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.807099] sdd: sdd1
[ 973.826406] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 973.828828] scsi 1:0:2:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.829925] sd 1:0:2:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[ 973.832408] sd 1:0:2:0: [sde] Write Protect is off
[ 973.836405] sd 1:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.837640] sd 1:0:2:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[ 973.837781] sd 1:0:2:0: [sde] Write Protect is off
[ 973.837955] sd 1:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.838019] sde:<6>ata1: EH complete
[ 973.856112] sde1
[ 973.856258] sd 1:0:2:0: [sde] Attached SCSI disk
[ 973.857341] scsi 1:0:3:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.859574] sd 1:0:3:0: [sdf] 586072368 512-byte hardware sectors (300069 MB)
[ 973.859723] sd 1:0:3:0: [sdf] Write Protect is off
[ 973.860516] sd 1:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.860639] sd 1:0:3:0: [sdf] 586072368 512-byte hardware sectors (300069 MB)
[ 973.860695] sd 1:0:3:0: [sdf] Write Protect is off
[ 973.860757] sd 1:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.860820] sdf: sdf1
[ 973.874922] sd 1:0:3:0: [sdf] Attached SCSI disk
[ 973.877377] scsi 1:0:4:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.879591] sd 1:0:4:0: [sdg] 586072368 512-byte hardware sectors (300069 MB)
[ 973.880372] sd 1:0:4:0: [sdg] Write Protect is off
[ 973.884370] sd 1:0:4:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.888370] sd 1:0:4:0: [sdg] 586072368 512-byte hardware sectors (300069 MB)
[ 973.888433] sd 1:0:4:0: [sdg] Write Protect is off
[ 973.889531] sd 1:0:4:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.889597] sdg: sdg1
[ 973.908066] sd 1:0:4:0: [sdg] Attached SCSI disk
[ 973.908364] scsi 0:0:1:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.912369] sd 0:0:1:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
[ 973.913300] sd 0:0:1:0: [sdh] Write Protect is off
[ 973.915499] sd 0:0:1:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.915780] sd 0:0:1:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
[ 973.915927] sd 0:0:1:0: [sdh] Write Protect is off
[ 973.917297] sd 0:0:1:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.917365] sdh: sdh1
[ 973.931851] sd 0:0:1:0: [sdh] Attached SCSI disk
[ 973.933116] scsi 0:0:2:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.933392] sd 0:0:2:0: [sdi] 586072368 512-byte hardware sectors (300069 MB)
[ 973.933937] sd 0:0:2:0: [sdi] Write Protect is off
[ 973.934204] sd 0:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.937270] sd 0:0:2:0: [sdi] 586072368 512-byte hardware sectors (300069 MB)
[ 973.938128] sd 0:0:2:0: [sdi] Write Protect is off
[ 973.939540] sd 0:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.939607] sdi: sdi1
[ 973.954948] sd 0:0:2:0: [sdi] Attached SCSI disk
[ 973.957276] scsi 0:0:3:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.959079] sd 0:0:3:0: [sdj] 586072368 512-byte hardware sectors (300069 MB)
[ 973.960321] sd 0:0:3:0: [sdj] Write Protect is off
[ 973.961247] sd 0:0:3:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.964181] sd 0:0:3:0: [sdj] 586072368 512-byte hardware sectors (300069 MB)
[ 973.964321] sd 0:0:3:0: [sdj] Write Protect is off
[ 973.964648] sd 0:0:3:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.964710] sdj: sdj1
[ 973.981606] sd 0:0:3:0: [sdj] Attached SCSI disk
[ 973.985261] scsi 0:0:4:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 973.986644] sd 0:0:4:0: [sdq] 586072368 512-byte hardware sectors (300069 MB)
[ 973.986873] sd 0:0:4:0: [sdq] Write Protect is off
[ 973.987098] sd 0:0:4:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.988307] sd 0:0:4:0: [sdq] 586072368 512-byte hardware sectors (300069 MB)
[ 973.988885] sd 0:0:4:0: [sdq] Write Protect is off
[ 973.992324] sd 0:0:4:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 973.992392] sdq: sdq1
[ 974.010309] sd 0:0:4:0: [sdq] Attached SCSI disk
Plugged ata1.00:
[ 998.067505] ata1.00: hard resetting link
[ 999.046782] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1007.515467] ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 1007.515531] ata1: failed to recover some devices, retrying in 5 secs
[ 1012.516856] ata1.00: hard resetting link
[ 1013.080448] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1013.109654] ata1.00: ATA-7: ST3300822AS, 3.AAD, max UDMA/133
[ 1013.109703] ata1.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1013.167921] ata1.00: configured for UDMA/100
[ 1013.184371] ata1: EH pending after completion, repeating EH (cnt=4)
[ 1013.296289] ata1.00: hard resetting link
[ 1013.859874] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1013.967009] ata1.00: configured for UDMA/100
[ 1013.983784] ata1: EH complete
[ 1013.983944] sd 0:0:1:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
[ 1013.984087] sd 0:0:1:0: [sdh] Write Protect is off
[ 1013.984305] sd 0:0:1:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1013.984469] sd 0:0:2:0: [sdi] 586072368 512-byte hardware sectors (300069 MB)
[ 1013.984610] sd 0:0:2:0: [sdi] Write Protect is off
[ 1013.984820] sd 0:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1013.984982] sd 0:0:3:0: [sdj] 586072368 512-byte hardware sectors (300069 MB)
[ 1013.985124] sd 0:0:3:0: [sdj] Write Protect is off
[ 1013.985334] sd 0:0:3:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1013.985534] sd 0:0:4:0: [sdq] 586072368 512-byte hardware sectors (300069 MB)
[ 1013.985678] sd 0:0:4:0: [sdq] Write Protect is off
[ 1013.985912] sd 0:0:4:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1013.986133] scsi 0:0:0:0: Direct-Access ATA ST3300822AS 3.AA PQ: 0 ANSI: 5
[ 1013.986349] sd 0:0:0:0: [sdr] 586072368 512-byte hardware sectors (300069 MB)
[ 1013.986488] sd 0:0:0:0: [sdr] Write Protect is off
[ 1013.986698] sd 0:0:0:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1013.986898] sd 0:0:0:0: [sdr] 586072368 512-byte hardware sectors (300069 MB)
[ 1013.987038] sd 0:0:0:0: [sdr] Write Protect is off
[ 1013.987251] sd 0:0:0:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1013.987314] sdr: sdr1
[ 1014.006839] sd 0:0:0:0: [sdr] Attached SCSI disk
next prev parent reply other threads:[~2007-07-03 19:40 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-01 10:54 [PATCHSET 4/4] implement PMP support, take 4 Tejun Heo
2007-07-01 10:54 ` [PATCH 01/15] libata-pmp: update ata_eh_reset() for PMP Tejun Heo
2007-07-01 10:54 ` [PATCH 04/15] libata-pmp: extend ACPI support to cover PMP Tejun Heo
2007-07-12 20:24 ` Jeff Garzik
2007-07-13 3:05 ` Tejun Heo
2007-07-01 10:54 ` [PATCH 03/15] libata-pmp: hook PMP support and enable it Tejun Heo
2007-07-01 10:54 ` [PATCH 02/15] libata-pmp: implement Port Multiplier support Tejun Heo
2007-07-01 10:54 ` [PATCH 05/15] sata_sil24: replace sil24_update_tf() with sil24_read_tf() Tejun Heo
2007-07-01 10:54 ` [PATCH 08/15] sata_sil24: implement PMP support Tejun Heo
2007-07-01 10:54 ` [PATCH 06/15] sata_sil24: separate out sil24_exec_polled_cmd() Tejun Heo
2007-07-12 20:25 ` Jeff Garzik
2007-07-13 3:06 ` Tejun Heo
2007-07-01 10:54 ` [PATCH 07/15] sata_sil24: separate out sil24_do_softreset() Tejun Heo
2007-07-12 20:26 ` Jeff Garzik
2007-07-01 10:54 ` [PATCH 09/15] sata_sil24: implement PORT_RST Tejun Heo
2007-07-01 10:54 ` [PATCH 13/15] ahci: separate out ahci_exec_polled_cmd() Tejun Heo
2007-07-12 20:26 ` Jeff Garzik
2007-07-01 10:54 ` [PATCH 12/15] ahci: separate out ahci_kick_engine() Tejun Heo
2007-07-12 20:26 ` Jeff Garzik
2007-07-01 10:54 ` [PATCH 11/15] ahci: use deadline instead of fixed timeout for 1st FIS for SRST Tejun Heo
2007-07-01 10:54 ` [PATCH 10/15] libata-pmp: implement qc_defer for command switching PMP support Tejun Heo
2007-07-01 10:54 ` [PATCH 14/15] ahci: separate out ahci_do_softreset() Tejun Heo
2007-07-12 20:26 ` Jeff Garzik
2007-07-01 10:54 ` [PATCH 15/15] ahci: implement PMP support Tejun Heo
2007-07-03 7:39 ` [PATCHSET 4/4] implement PMP support, take 4 Jim Paris
2007-07-03 9:34 ` Tejun Heo
2007-07-03 19:40 ` Jim Paris [this message]
2007-07-12 20:27 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070703194012.GA20608@jim.sh \
--to=jim@jtan.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).