[PATCH] piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)

[PATCH] piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)

[Bartlomiej Zolnierkiewicz]

* Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in
  {piix,slc90e66}_tune_chipset().

* Add PIO1 handling to {piix,slc90e66}_tune_chipset().

* Bump driver version.  

v2:
* Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed
  there (Noticed by Sergei)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
 drivers/ide/pci/piix.c     |   17 ++++++++---------
 drivers/ide/pci/slc90e66.c |   15 +++++++--------
 2 files changed, 15 insertions(+), 17 deletions(-)

Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/ide/pci/piix.c	Version 0.50	Jun 10, 2007
+ *  linux/drivers/ide/pci/piix.c	Version 0.51	Jul 6, 2007
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -109,7 +109,7 @@ static int no_piix_dma;
  *	piix_dma_2_pio		-	return the PIO mode matching DMA
  *	@xfer_rate: transfer speed
  *
- *	Returns the nearest equivalent PIO timing for the PIO or DMA
+ *	Returns the nearest equivalent PIO timing for the DMA
  *	mode requested by the controller.
  */
  
@@ -123,20 +123,14 @@ static u8 piix_dma_2_pio (u8 xfer_rate) 
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
@@ -269,6 +263,7 @@ static int piix_tune_chipset (ide_drive_
 		case XFER_PIO_4:
 		case XFER_PIO_3:
 		case XFER_PIO_2:
+		case XFER_PIO_1:
 		case XFER_PIO_0:	break;
 		default:		return -1;
 	}
@@ -299,7 +294,11 @@ static int piix_tune_chipset (ide_drive_
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 	}
 
-	piix_tune_pio(drive, piix_dma_2_pio(speed));
+	if (speed > XFER_PIO_4)
+		piix_tune_pio(drive, piix_dma_2_pio(speed));
+	else
+		piix_tune_pio(drive, speed - XFER_PIO_0);
+
 	return ide_config_drive_speed(drive, speed);
 }
 
Index: b/drivers/ide/pci/slc90e66.c
===================================================================
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/ide/pci/slc90e66.c	Version 0.14	February 8, 2007
+ *  linux/drivers/ide/pci/slc90e66.c	Version 0.15	Jul 6, 2007
  *
  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
@@ -29,20 +29,14 @@ static u8 slc90e66_dma_2_pio (u8 xfer_ra
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
@@ -136,6 +130,7 @@ static int slc90e66_tune_chipset (ide_dr
 		case XFER_PIO_4:
 		case XFER_PIO_3:
 		case XFER_PIO_2:
+		case XFER_PIO_1:
 		case XFER_PIO_0:        break;
 		default:		return -1;
 	}
@@ -156,7 +151,11 @@ static int slc90e66_tune_chipset (ide_dr
 			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 	}
 
-	slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+	if (speed > XFER_PIO_4)
+		slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+	else
+		slc90e66_tune_pio(drive, speed - XFER_PIO_0);
+
 	return ide_config_drive_speed(drive, speed);
 }
 

Re: [PATCH] piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)

[Sergei Shtylyov]

Bartlomiej Zolnierkiewicz wrote:

> * Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in
>   {piix,slc90e66}_tune_chipset().

> * Add PIO1 handling to {piix,slc90e66}_tune_chipset().

> * Bump driver version.  

> v2:
> * Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed
>   there (Noticed by Sergei)

> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

MBR, Sergei

Re: [PATCH] piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)

[Bartlomiej Zolnierkiewicz]

On Saturday 14 July 2007, Sergei Shtylyov wrote:
> Bartlomiej Zolnierkiewicz wrote:
> 
> > * Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in
> >   {piix,slc90e66}_tune_chipset().
> 
> > * Add PIO1 handling to {piix,slc90e66}_tune_chipset().
> 
> > * Bump driver version.  
> 
> > v2:
> > * Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed
> >   there (Noticed by Sergei)
> 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> 
> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

added