From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?R=FAben?= Fonseca Subject: Re: libata [ata_piix] still no resume from S3 ? Date: Thu, 19 Jul 2007 16:04:36 +0100 Message-ID: <20070719150436.GA9006@0x82.com> References: <20070712162450.GA7132@0x82.com> <469744DB.5070600@gmail.com> <20070714210117.GA20723@0x82.com> <469DD216.5040305@gmail.com> <20070719092053.GA21254@0x82.com> <469F2E4A.1020502@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from relay5.ptmail.sapo.pt ([212.55.154.25]:47500 "HELO sapo.pt" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with SMTP id S1751625AbXGSPD7 convert rfc822-to-8bit (ORCPT ); Thu, 19 Jul 2007 11:03:59 -0400 Content-Disposition: inline In-Reply-To: <469F2E4A.1020502@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: Linux Kernel Mailling List , "linux-ide@vger.kernel.org" On Thu, 19 Jul 2007, Tejun Heo wrote: > R=FAben Fonseca wrote: > > On Wed, 18 Jul 2007, Tejun Heo wrote: > >=20 > >>> irq 23: nobody cared (try booting with the "irqpool" option) > >>> __report_bad_irq > >>> note_interrupt > >>> handle_IRQ_event > >>> handle_fasteoi_irq > >>> do_IRQ > >>> do_IRQ > >>> irq_exit > >>> smp_acpi_timer > >>> common_interrupt > >>> acpi_pm_read > >>> getnstimeofday > >>> ktime_get_ts > >>> ktime_egt > >>> tick_nohz_restart_sched_tick > >>> cpu_idle > >>> start_kernel > >>> unkown_bootoption > >>> =3D=3D=3D=3D=3D > >>> handlers: > >>> (ata_interrupt [libata]) > >>> (tifm_7xx1_isr [tifm_7xx1]) > >>> Disabling IRQ #23 > >>> (...) > >>> ATA: abnormal status 0x7F on port 0x000118cf > >>> > >>> And hard drive never cames up.. have to hard reboot the machine.. > >>> Does it help? > >> Hmmm... That's 'nobody cared' during resume. Please post the resu= lt of > >> 'lspci -nnvvv'. > >=20 > > 09:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Mu= ltimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] > > Subsystem: Sony Corporation Unknown device [104d:81e6] > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr= - Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort-= SERR- > Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes > > Interrupt: pin C routed to IRQ 23 > > Region 0: Memory at dc004000 (32-bit, non-prefetchable) [size=3D4K= ] > > Capabilities: [44] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0+,D1+,D2+,D3ho= t+,D3cold-) > > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- >=20 > Does the problem still occur if you disable the card reader? I wish I could disable this card reader. It is built in on the hardware= , and there are no drivers for Linux. There is no option on the BIOS to disable the device. Is there any way (kernel parameters, magic program, etc) to disable this device without opening my laptop to cut the wires? :D Ruben --=20 Will work for bandwidth