linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH 2/11] ide-pmac: pmac_ide_tune_chipset() fixes
Date: Sun, 22 Jul 2007 20:21:38 +0200	[thread overview]
Message-ID: <200707222021.38796.bzolnier@gmail.com> (raw)


* Don't check check for pmif == NULL (it should never be NULL if we got here).

* Make a local copy of the timings and set the pmif->timings[] only after
  setting the transfer mode on the device (otherwise SELECT_DRIVE() call in
  pmac_ide_do_setfeature() will program new timings before the transfer mode
  is set on the device - this was pointed out by Sergei).  This change makes
  pmac_ide_tune_chipset() behavior match this of pmac_ide_{m,u}dma_enable().

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ppc/pmac.c |   27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -915,14 +915,15 @@ static int pmac_ide_tune_chipset(ide_dri
 	int unit = (drive->select.b.unit & 0x01);
 	int ret = 0;
 	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-	u32 *timings, *timings2;
+	u32 *timings, *timings2, tl[2];
 
-	if (pmif == NULL)
-		return 1;
-		
 	timings = &pmif->timings[unit];
 	timings2 = &pmif->timings[unit+2];
-	
+
+	/* Copy timings to local image */
+	tl[0] = *timings;
+	tl[1] = *timings2;
+
 	switch(speed) {
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 		case XFER_UDMA_6:
@@ -933,19 +934,19 @@ static int pmac_ide_tune_chipset(ide_dri
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 			if (pmif->kind == controller_kl_ata4)
-				ret = set_timings_udma_ata4(timings, speed);
+				ret = set_timings_udma_ata4(&tl[0], speed);
 			else if (pmif->kind == controller_un_ata6
 				 || pmif->kind == controller_k2_ata6)
-				ret = set_timings_udma_ata6(timings, timings2, speed);
+				ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
 			else if (pmif->kind == controller_sh_ata6)
-				ret = set_timings_udma_shasta(timings, timings2, speed);
+				ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
 			else
-				ret = 1;		
+				ret = 1;
 			break;
 		case XFER_MW_DMA_2:
 		case XFER_MW_DMA_1:
 		case XFER_MW_DMA_0:
-			ret = set_timings_mdma(drive, pmif->kind, timings, timings2, speed, 0);
+			ret = set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed, 0);
 			break;
 		case XFER_SW_DMA_2:
 		case XFER_SW_DMA_1:
@@ -961,7 +962,11 @@ static int pmac_ide_tune_chipset(ide_dri
 	ret = pmac_ide_do_setfeature(drive, speed);
 	if (ret)
 		return ret;
-		
+
+	/* Apply timings to controller */
+	*timings = tl[0];
+	*timings2 = tl[1];
+
 	pmac_ide_do_update_timings(drive);	
 
 	return 0;

             reply	other threads:[~2007-07-22 18:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-22 18:21 Bartlomiej Zolnierkiewicz [this message]
2007-07-22 21:55 ` [PATCH 2/11] ide-pmac: pmac_ide_tune_chipset() fixes Benjamin Herrenschmidt
2007-07-23 21:21   ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200707222021.38796.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=benh@kernel.crashing.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).