From: Mikko Rapeli <mikko.rapeli@iki.fi>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, linux-ide@vger.kernel.org
Subject: Re: ST340823A disk size issue
Date: Thu, 2 Aug 2007 23:03:57 +0300 [thread overview]
Message-ID: <20070802200357.GA1178@nalle> (raw)
In-Reply-To: <200708020117.58916.bzolnier@gmail.com>
On Thu, Aug 02, 2007 at 01:17:58AM +0200, Bartlomiej Zolnierkiewicz wrote:
> Mikko, could you please revert any patches that you have applied, uncomment
> #define DEBUG in ide-disk.c, recompile and note the sectors count in the
>
> "hdd: reading: block=78165360 sectors=..."
>
> debug message?
Full log at http://bugzilla.kernel.org/attachment.cgi?id=12235
Here's a summary:
$ egrep hdd\|ide1\|current\ capacity\|native\ \ capacity
dmesg_ide_debug_26221.txt
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide1...
probing for hdd: present=0, media=32, probetype=ATA
hdd: ST340823A, ATA DISK drive
hdd: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hdd: max request size: 128KiB
ide1: start_request: current=0xc18f5c28
hdd: do_special: 0x03
ide1: start_request: current=0xc18f5c28
hdd: do_special: 0x02
ide1: start_request: current=0xc18f5c28
hdd: Host Protected Area detected.
current capacity is 78165360 sectors (40020 MB)
native capacity is 78165361 sectors (40020 MB)
ide1: start_request: current=0xc18f5c28
hdd: Host Protected Area disabled.
hdd: 78165361 sectors (40020 MB) w/1024KiB Cache, CHS=65535/16/63,
UDMA(33)
hdd: cache flushes not supported
hdd:ide1: start_request: current=0xc1e0b578
hdd: reading: block=0, sectors=8, buffer=0xc18b7000
hdd1 hdd2 hdd3
ide1: start_request: current=0xc1e0b578
hdd: reading: block=78165120, sectors=8, buffer=0xc1e54000
ide1: start_request: current=0xc1e0b578
hdd: reading: block=78165352, sectors=1, buffer=0xc1e2e000
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165353, sectors=7, buffer=0xc1e2e200
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x02
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
sector=78165360
hdd: DMA disabled
ide1: reset: master: error (0x00?)
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x03
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x02
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=78165360
ide1: start_request: current=0xc1e0b408
hdd: do_special: 0x02
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=781
65360
ide1: start_request: current=0xc1e0b408
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78230639,
sector=78165360
ide1: reset: master: error (0x00?)
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165360
Buffer I/O error on device hdd, logical block 78165360
ide1: start_request: current=0xc1e0b408
end_request: I/O error, dev hdd, sector 78165296
...
next prev parent reply other threads:[~2007-08-02 20:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-01 9:29 ST340823A disk size issue Mikko Rapeli
2007-08-01 13:05 ` Alan Cox
2007-08-02 12:35 ` Mikko Rapeli
2007-08-01 20:34 ` Bartlomiej Zolnierkiewicz
2007-08-01 21:50 ` Mikko Rapeli
2007-08-01 22:19 ` Bartlomiej Zolnierkiewicz
2007-08-01 22:32 ` Alan Cox
2007-08-01 23:17 ` Bartlomiej Zolnierkiewicz
2007-08-02 11:33 ` Alan Cox
2007-08-02 12:27 ` Bartlomiej Zolnierkiewicz
2007-08-02 13:09 ` Alan Cox
2007-08-02 20:03 ` Mikko Rapeli [this message]
2007-08-02 20:42 ` Alan Cox
2007-08-02 22:34 ` Bartlomiej Zolnierkiewicz
2007-08-02 23:11 ` Mikko Rapeli
2007-08-02 23:35 ` Bartlomiej Zolnierkiewicz
2007-08-05 19:06 ` [PATCH] ST340823A, HPA and libata Mikko Rapeli
2007-08-05 19:32 ` Alan Cox
2007-08-08 13:25 ` Alan Cox
2007-08-15 13:56 ` Mikko Rapeli
2007-09-20 21:37 ` Jeff Garzik
2007-08-02 0:33 ` ST340823A disk size issue Bartlomiej Zolnierkiewicz
2007-08-02 12:17 ` Sergei Shtylyov
2007-08-02 12:38 ` Sergei Shtylyov
2007-08-01 22:25 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070802200357.GA1178@nalle \
--to=mikko.rapeli@iki.fi \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).