From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH] ide-pmac: use ide_tune_dma() (take 2)
Date: Sat, 4 Aug 2007 22:04:01 +0200 [thread overview]
Message-ID: <200708042204.01165.bzolnier@gmail.com> (raw)
* Add missing initialization of hwif->autodma and drive->autodma to
pmac_ide_setup_dma().
* Use ide_tune_dma() in pmac_ide_dma_check().
While at it:
* Fix pmac_ide_dma_check() return value if DMA mode is not programmed
(should be "-1" otherwise ide_set_dma() will try to enable DMA).
* Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always
called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if
->ide_dma_check returns "0").
v2:
* No reason to blacklist all ide_floppy devices and the old code was always
enabling DMA anyway (without even programming controller/device if the
device was ide_floppy).
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
Ben, any update on the testing status of ide-pmac series?
I also merged your patch to my tree but it is lacking description:
http://kernel.org/pub/linux/kernel/people/bart/pata-2.6/patches/ide-pmac-fix-pio-setup-and-enable-autotune.patch
Thanks, Bart.
drivers/ide/ppc/pmac.c | 24 +++++++-----------------
1 file changed, 7 insertions(+), 17 deletions(-)
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1592,23 +1592,10 @@ pmac_ide_destroy_dmatable (ide_drive_t *
static int
pmac_ide_dma_check(ide_drive_t *drive)
{
- int enable = 1;
- drive->using_dma = 0;
-
- if (drive->media == ide_floppy)
- enable = 0;
- if ((drive->id->capability & 1) == 0 && !__ide_dma_good_drive(drive))
- enable = 0;
- if (__ide_dma_bad_drive(drive))
- enable = 0;
-
- if (enable) {
- u8 mode = ide_max_dma_mode(drive);
+ if (ide_tune_dma(drive))
+ return 0;
- if (mode && pmac_ide_tune_chipset(drive, mode) == 0)
- drive->using_dma = 1;
- }
- return 0;
+ return -1;
}
/*
@@ -1842,7 +1829,10 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x00;
break;
- }
+ }
+
+ hwif->autodma = 1;
+ hwif->drives[1].autodma = hwif->drives[0].autodma = hwif->autodma;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
reply other threads:[~2007-08-04 20:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200708042204.01165.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).