From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 1/4] ide: fix hidden dependencies on CONFIG_IDE_GENERIC
Date: Thu, 9 Aug 2007 22:12:48 +0200 [thread overview]
Message-ID: <200708092212.49070.bzolnier@gmail.com> (raw)
Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their
config options lack explicit dependencies on IDE_GENERIC. In the long-term
these host drivers should be fixed to do the probing themselves but for now
fix them by making their config options select CONFIG_IDE_GENERIC.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
arch/cris/arch-v10/drivers/Kconfig | 1 +
arch/cris/arch-v32/drivers/Kconfig | 1 +
drivers/ide/Kconfig | 9 +++++++++
3 files changed, 11 insertions(+)
Index: b/arch/cris/arch-v10/drivers/Kconfig
===================================================================
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -548,6 +548,7 @@ config ETRAX_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
+ select IDE_GENERIC
help
Enable this to get support for ATA/IDE.
You can't use parallel ports or SCSI ports
Index: b/arch/cris/arch-v32/drivers/Kconfig
===================================================================
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -592,6 +592,7 @@ config ETRAX_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
+ select IDE_GENERIC
help
Enables the ETRAX IDE driver.
Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -304,6 +304,7 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
+ default H8300
help
If unsure, say N.
@@ -352,6 +353,7 @@ config BLK_DEV_CMD640_ENHANCED
config BLK_DEV_IDEPNP
bool "PNP EIDE support"
depends on PNP
+ select IDE_GENERIC
help
If you have a PnP (Plug and Play) compatible EIDE card and
would like the kernel to automatically detect and activate
@@ -858,6 +860,7 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
config IDE_ARM
def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+ select IDE_GENERIC
config BLK_DEV_IDE_ICSIDE
tristate "ICS IDE interface support"
@@ -891,6 +894,7 @@ config BLK_DEV_IDE_BAST
config BLK_DEV_GAYLE
bool "Amiga Gayle IDE interface support"
depends on AMIGA
+ select IDE_GENERIC
help
This is the IDE driver for the Amiga Gayle IDE interface. It supports
both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
@@ -922,6 +926,7 @@ config BLK_DEV_IDEDOUBLER
config BLK_DEV_BUDDHA
bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
+ select IDE_GENERIC
help
This is the IDE driver for the IDE interfaces on the Buddha,
Catweasel and X-Surf expansion boards. It supports up to two interfaces
@@ -934,6 +939,7 @@ config BLK_DEV_BUDDHA
config BLK_DEV_FALCON_IDE
bool "Falcon IDE interface support"
depends on ATARI
+ select IDE_GENERIC
help
This is the IDE driver for the builtin IDE interface on the Atari
Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
@@ -943,6 +949,7 @@ config BLK_DEV_FALCON_IDE
config BLK_DEV_MAC_IDE
bool "Macintosh Quadra/Powerbook IDE interface support"
depends on MAC
+ select IDE_GENERIC
help
This is the IDE driver for the builtin IDE interface on some m68k
Macintosh models. It supports both the `Quadra style' (used in
@@ -956,6 +963,7 @@ config BLK_DEV_MAC_IDE
config BLK_DEV_Q40IDE
bool "Q40/Q60 IDE interface support"
depends on Q40
+ select IDE_GENERIC
help
Enable the on-board IDE controller in the Q40/Q60. This should
normally be on; disable it only if you are running a custom hard
@@ -964,6 +972,7 @@ config BLK_DEV_Q40IDE
config BLK_DEV_MPC8xx_IDE
bool "MPC8xx IDE support"
depends on 8xx && IDE=y && BLK_DEV_IDE=y
+ select IDE_GENERIC
help
This option provides support for IDE on Motorola MPC8xx Systems.
Please see 'Type of MPC8xx IDE interface' for details.
reply other threads:[~2007-08-09 20:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200708092212.49070.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).