From: babl <babl1986@gmail.com>
To: linux-ide@vger.kernel.org
Subject: Re: regression problem with Maxtor disk
Date: Mon, 13 Aug 2007 03:36:10 +0400 [thread overview]
Message-ID: <200708130336.10603.babl1986@gmail.com> (raw)
I think, it's sata_nv driver problem. I have same bug too.
MB: ASUS A8N SLI Deluxe (nforce4 sli + sil3114)
Power: FSP Epsilon 700W
/dev/disk/by-id/scsi-SATA_Maxtor_6B200M0_B404ZB9H
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD401LJS0HVJ1CP105426
/dev/disk/by-id/scsi-SATA_WDC_WD3200JD-00_WD-WCAMR1623763
/dev/disk/by-id/scsi-SATA_WDC_WD3200JS-00_WD-WCAPD1127756
/dev/disk/by-id/scsi-SATA_WDC_WD3200JS-00_WD-WCAPD2176538
/dev/disk/by-id/scsi-SATA_WDC_WD3200JS-60_WD-WCAPD2515626
/dev/disk/by-id/scsi-SATA_WDC_WD3200KS-00_WD-WCAPD2510753
/dev/disk/by-id/scsi-SATA_WDC_WD3200KS-00_WD-WCAPD3248212
When I try to copy files from one HDD to another, i have freeses and low
speed. There are soft and hard resets here and regression from UDMA/133 to
PIO.
2.6.18 (HD400LJ):
Aug 13 03:16:52 bobr kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x580000 action 0x2
Aug 13 03:16:52 bobr kernel: ata4.00: (BMDMA stat 0x20)
Aug 13 03:16:52 bobr kernel: ata4.00: tag 0 cmd 0x35 Emask 0x10 stat 0x51 err
0x84 (ATA bus error)
Aug 13 03:16:53 bobr kernel: ata4: soft resetting port
Aug 13 03:16:53 bobr kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 13 03:16:53 bobr kernel: ata4.00: configured for UDMA/100
Aug 13 03:16:53 bobr kernel: ata4: EH complete
Aug 13 03:16:53 bobr kernel: SCSI device sdd: 625142448 512-byte hdwr sectors
(320073 MB)
Aug 13 03:16:53 bobr kernel: sdd: Write Protect is off
Aug 13 03:16:54 bobr kernel: sdd: Mode Sense: 00 3a 00 00
Aug 13 03:16:54 bobr kernel: SCSI device sdd: drive cache: write back
Aug 13 03:17:28 bobr kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x180000 action 0x2 frozen
Aug 13 03:17:28 bobr kernel: ata4.00: (BMDMA stat 0x21)
Aug 13 03:17:28 bobr kernel: ata4.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err
0x0 (timeout)
Aug 13 03:17:35 bobr kernel: ata4: port is slow to respond, please be patient
Aug 13 03:17:59 bobr kernel: ata4: port failed to respond (30 secs)
Aug 13 03:17:59 bobr kernel: ata4: soft resetting port
Aug 13 03:17:59 bobr kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 13 03:17:59 bobr kernel: ata4.00: configured for UDMA/100
Aug 13 03:17:59 bobr kernel: ata4: EH complete
Aug 13 03:18:00 bobr kernel: SCSI device sdd: 625142448 512-byte hdwr sectors
(320073 MB)
Aug 13 03:18:00 bobr kernel: sdd: Write Protect is off
Aug 13 03:18:00 bobr kernel: sdd: Mode Sense: 00 3a 00 00
Aug 13 03:18:00 bobr kernel: SCSI device sdd: drive cache: write back
2.6.23-rc2 (HD401LJ NCQ BLACKLISTED!!!):
Aug 12 23:39:54 bobr kernel: ata5: timeout waiting for ADMA IDLE, stat=0x440
Aug 12 23:39:54 bobr kernel: ata5.00: exception Emask 0x1 SAct 0x0 SErr
0x380000 action 0x2
Aug 12 23:39:54 bobr kernel: ata5.00: CPB resp_flags 0x11: , CMD error
Aug 12 23:39:54 bobr kernel: ata5.00: cmd 25/00:d0:f9:6c:b9/00:01:17:00:00/e0
tag 0 cdb 0x0 data 237568 in
Aug 12 23:39:54 bobr kernel: res 51/84:df:ea:6d:b9/84:00:17:00:00/e0
Emask 0x10 (ATA bus error)
Aug 12 23:39:54 bobr kernel: ata5: soft resetting port
Aug 12 23:39:55 bobr kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
Aug 12 23:39:55 bobr kernel: ata5.00: configured for UDMA/133
Aug 12 23:39:55 bobr kernel: ata5: EH complete
Aug 12 23:39:55 bobr kernel: sd 4:0:0:0: [sde] 781422768 512-byte hardware
sectors (400088 MB)
Aug 12 23:39:55 bobr kernel: sd 4:0:0:0: [sde] Write Protect is off
Aug 12 23:39:55 bobr kernel: sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Aug 12 23:39:56 bobr kernel: sd 4:0:0:0: [sde] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Aug 12 23:40:46 bobr kernel: t. Dev: usb-0000:00:02.0-6/input0, Type: 2, Code:
1, Value: 1
Aug 12 23:40:47 bobr kernel: ata5: EH in ADMA mode, notifier 0x0
notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb
idx 0x0
Aug 12 23:40:47 bobr kernel: ata5: CPB 0: ctl_flags 0xd, resp_flags 0x0
Aug 12 23:40:47 bobr kernel: ata5: timeout waiting for ADMA IDLE, stat=0x400
Aug 12 23:40:47 bobr kernel: ata5: timeout waiting for ADMA LEGACY, stat=0x400
Aug 12 23:40:47 bobr kernel: ata5: limiting SATA link speed to 1.5 Gbps
Aug 12 23:40:47 bobr kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0
action 0x6 frozen
Aug 12 23:40:47 bobr kernel: ata5.00: cmd 25/00:00:79:76:a3/00:02:17:00:00/e0
tag 0 cdb 0x0 data 262144 in
Aug 12 23:40:47 bobr kernel: res 40/00:8f:ba:10:a0/84:01:17:00:00/e0
Emask 0x4 (timeout)
Aug 12 23:40:47 bobr kernel: ata5: hard resetting port
Aug 12 23:40:47 bobr kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl
310)
Aug 12 23:40:47 bobr kernel: ata5.00: configured for UDMA/133
Aug 12 23:40:47 bobr kernel: ata5: EH complete
Aug 12 23:40:47 bobr kernel: sd 4:0:0:0: [sde] 781422768 512-byte hardware
sectors (400088 MB)
Aug 12 23:40:48 bobr kernel: sd 4:0:0:0: [sde] Write Protect is off
Aug 12 23:40:48 bobr kernel: sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Aug 12 23:40:48 bobr kernel: sd 4:0:0:0: [sde] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
There is no connectors and power errors, i try to use many cables and bug is
present. When I try to disable HD401LJ, I see the same bug on WD HDDs on
ata1,2,3,4.... =(
I think, it's a sata_nv or sil3114 driver bug, in this mailing lists there are
many same problems with this chipset.
next reply other threads:[~2007-08-12 23:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-12 23:36 babl [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-08-12 14:14 regression problem with Maxtor disk Lieven Marchand
2007-08-14 9:50 ` Tejun Heo
2007-08-14 23:14 ` Robert Hancock
2007-08-15 7:34 ` Lieven Marchand
2007-08-15 7:53 ` Tejun Heo
2007-08-15 21:22 ` Lieven Marchand
2007-08-15 23:31 ` Robert Hancock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200708130336.10603.babl1986@gmail.com \
--to=babl1986@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).