* [PATCH 1/4] ide: add ide_dev_is_sata() helper
@ 2007-08-19 18:59 Sergei Shtylyov
2007-08-21 20:36 ` Bartlomiej Zolnierkiewicz
2007-08-24 18:49 ` Sergei Shtylyov
0 siblings, 2 replies; 3+ messages in thread
From: Sergei Shtylyov @ 2007-08-19 18:59 UTC (permalink / raw)
To: bzolnier; +Cc: linux-ide, linux-kernel
Make the SATA drive detection code from eighty_ninty_three() into inline
ide_dev_is_sata() helper fixing it along the way to be more strict while
checking word 80 for the reserved values...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
This is against the current Linus tree and unfortunately I was able to only
compile test it since that tree gives MODPOST warning and dies early on bootup.
Well, I also have no SATA drive at hand... :-)
drivers/ide/ide-iops.c | 3 +--
include/linux/ide.h | 13 +++++++++++++
2 files changed, 14 insertions(+), 2 deletions(-)
Index: linux-2.6/drivers/ide/ide-iops.c
===================================================================
--- linux-2.6.orig/drivers/ide/ide-iops.c
+++ linux-2.6/drivers/ide/ide-iops.c
@@ -580,8 +580,7 @@ u8 eighty_ninty_three (ide_drive_t *driv
if (hwif->cbl != ATA_CBL_PATA80)
goto no_80w;
- /* Check for SATA but only if we are ATA5 or higher */
- if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0))
+ if (ide_dev_is_sata(id))
return 1;
/*
Index: linux-2.6/include/linux/ide.h
===================================================================
--- linux-2.6.orig/include/linux/ide.h
+++ linux-2.6/include/linux/ide.h
@@ -1380,6 +1380,19 @@ static inline int ide_dev_has_iordy(stru
return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
}
+static inline int ide_dev_is_sata(struct hd_driveid *id)
+{
+ /*
+ * See if word 93 is 0 AND drive is at least ATA-5 compatible
+ * making sure that word 80 is valid by flipping its MSB --
+ * this trick allows us to filter out reserved values of 0
+ * and 0xffff along with the earlier ATA revisions.
+ */
+ if (id->hw_config == 0 && (id->major_rev_num ^ 0x8000) >= 0x8020)
+ return 1;
+ return 0;
+}
+
u8 ide_dump_status(ide_drive_t *, const char *, u8);
typedef struct ide_pio_timings_s {
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/4] ide: add ide_dev_is_sata() helper
2007-08-19 18:59 [PATCH 1/4] ide: add ide_dev_is_sata() helper Sergei Shtylyov
@ 2007-08-21 20:36 ` Bartlomiej Zolnierkiewicz
2007-08-24 18:49 ` Sergei Shtylyov
1 sibling, 0 replies; 3+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-08-21 20:36 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: linux-ide, linux-kernel
On Sunday 19 August 2007, Sergei Shtylyov wrote:
> Make the SATA drive detection code from eighty_ninty_three() into inline
> ide_dev_is_sata() helper fixing it along the way to be more strict while
> checking word 80 for the reserved values...
>
> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
applied
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/4] ide: add ide_dev_is_sata() helper
2007-08-19 18:59 [PATCH 1/4] ide: add ide_dev_is_sata() helper Sergei Shtylyov
2007-08-21 20:36 ` Bartlomiej Zolnierkiewicz
@ 2007-08-24 18:49 ` Sergei Shtylyov
1 sibling, 0 replies; 3+ messages in thread
From: Sergei Shtylyov @ 2007-08-24 18:49 UTC (permalink / raw)
To: bzolnier; +Cc: linux-ide, linux-kernel
Hello, I wrote:
> Make the SATA drive detection code from eighty_ninty_three() into inline
> ide_dev_is_sata() helper fixing it along the way to be more strict while
> checking word 80 for the reserved values...
> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[...]
> Index: linux-2.6/drivers/ide/ide-iops.c
> ===================================================================
> --- linux-2.6.orig/drivers/ide/ide-iops.c
> +++ linux-2.6/drivers/ide/ide-iops.c
> @@ -580,8 +580,7 @@ u8 eighty_ninty_three (ide_drive_t *driv
> if (hwif->cbl != ATA_CBL_PATA80)
> goto no_80w;
>
> - /* Check for SATA but only if we are ATA5 or higher */
> - if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0))
> + if (ide_dev_is_sata(id))
> return 1;
>
> /*
> Index: linux-2.6/include/linux/ide.h
> ===================================================================
> --- linux-2.6.orig/include/linux/ide.h
> +++ linux-2.6/include/linux/ide.h
> @@ -1380,6 +1380,19 @@ static inline int ide_dev_has_iordy(stru
> return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
> }
>
> +static inline int ide_dev_is_sata(struct hd_driveid *id)
> +{
> + /*
> + * See if word 93 is 0 AND drive is at least ATA-5 compatible
> + * making sure that word 80 is valid by flipping its MSB --
> + * this trick allows us to filter out reserved values of 0
> + * and 0xffff along with the earlier ATA revisions.
> + */
> + if (id->hw_config == 0 && (id->major_rev_num ^ 0x8000) >= 0x8020)
> + return 1;
> + return 0;
> +}
> +
The same could have been achieved more simply:
if (id->hw_config == 0 && (short}id->major_rev_num >= 0x0020
so I'll probably recast...
MBR, Sergei
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-08-24 18:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-19 18:59 [PATCH 1/4] ide: add ide_dev_is_sata() helper Sergei Shtylyov
2007-08-21 20:36 ` Bartlomiej Zolnierkiewicz
2007-08-24 18:49 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).