[PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai

[PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai

[Jason Gaston]

Resend without wordwrap.

This patch adds the Intel Tolapai RAID controller DID's for SATA support.

Signed-off-by:  Jason Gaston <jason.d.gaston@intel.com>

--- linux-2.6.23-rc4/drivers/ata/ahci.c.orig	2007-08-27 18:32:35.000000000 -0700
+++ linux-2.6.23-rc4/drivers/ata/ahci.c	2007-08-28 16:58:11.000000000 -0700
@@ -411,6 +411,8 @@
 	{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
 	{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
 	{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
+	{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

RE: [PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai

[Gaston, Jason D]

>-----Original Message-----
>From: Gaston, Jason D
>Sent: Thursday, August 30, 2007 5:54 PM
>To: jgarzik@pobox.com; Gaston, Jason D
>Cc: linux-ide@vger.kernel.org; linux-kernel@vger.kernel.org
>Subject: [PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel
>Tolapai
>
>Resend without wordwrap.
>
>This patch adds the Intel Tolapai RAID controller DID's for SATA support.
>
>Signed-off-by:  Jason Gaston <jason.d.gaston@intel.com>
>
>--- linux-2.6.23-rc4/drivers/ata/ahci.c.orig	2007-08-27
>18:32:35.000000000 -0700
>+++ linux-2.6.23-rc4/drivers/ata/ahci.c	2007-08-28 16:58:11.000000000 -
>0700
>@@ -411,6 +411,8 @@
> 	{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
> 	{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
> 	{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
>+	{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
>+	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
>
> 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
> 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,


I am having trouble sending these patches.  When I look in the LKML.org message archive, I see "=A0" and "=20" in the messages.  I am using KMail to send these, I have wordwrap turned off and am inserting the patch file.  Does anyone know what I am doing wrong?

Thanks,

Jason

Re: [PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai

[Jeremy Higdon]

On Thu, Aug 30, 2007 at 06:00:26PM -0700, Gaston, Jason D wrote:
> >
> >Resend without wordwrap.
> >
> >This patch adds the Intel Tolapai RAID controller DID's for SATA support.
> >
> >Signed-off-by:  Jason Gaston <jason.d.gaston@intel.com>
> >
> >--- linux-2.6.23-rc4/drivers/ata/ahci.c.orig	2007-08-27
> >18:32:35.000000000 -0700
> >+++ linux-2.6.23-rc4/drivers/ata/ahci.c	2007-08-28 16:58:11.000000000 -
> >0700
> >@@ -411,6 +411,8 @@
> > 	{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
> > 	{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
> > 	{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
> >+	{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
> >+	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
> >
> > 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
> > 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
> 
> 
> I am having trouble sending these patches.  When I look in the LKML.org message archive, I see "=A0" and "=20" in the messages.  I am using KMail to send these, I have wordwrap turned off and am inserting the patch file.  Does anyone know what I am doing wrong?


It seems that you have some 8-bit characters in the email.
The '=20' in the middle of the patch was stripped for me by sendmail,
apparently, but you can see the character before your name in the
'Signed-off-by' line.

Maybe try mutt?