From: Andrew Morton <akpm@linux-foundation.org>
To: Tejun Heo <htejun@gmail.com>
Cc: michal.k.k.piotrowski@gmail.com, bryan@arbores.ca,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: Stardom SATA HSM violation
Date: Wed, 5 Sep 2007 09:53:27 -0700 [thread overview]
Message-ID: <20070905095327.6277d054.akpm@linux-foundation.org> (raw)
In-Reply-To: <46DBCB6C.8080206@gmail.com>
> On Mon, 03 Sep 2007 17:53:00 +0900 Tejun Heo <htejun@gmail.com> wrote:
> Michal Piotrowski wrote:
> > Hi,
> >
> > [Adding linux-ide to CC]
> >
> > On 25/08/07, Bryan Woods <bryan@arbores.ca> wrote:
> >> Hi KML
> >>
> >> I am installing gentoo 2007.0 (kernel 2.6.19) on a dual AMD Opteron server (total of 4 cores). The hard disk is a Stardom 2611-2S-S1 device: actually two 250GB drives in a RAID0 config managed by the device itself - it should appear to the kernel as one SATA drive. If it matters, the underlying HDs are "Seagate Barracuda 7200 10"s. Here's the device:
> >>
> >> http://www.synetic.net/Synetic-Products/Stardoms/SR-2611-SA/Stardom-2611.htm
> >>
> >> During the install and at different points in the process I get an "HSM violation" and the system becomes unresponsive. It looks like a similar situation to:
> >>
> >> http://lkml.org/lkml/2007/6/6/195
> >>
> >> Will more recent kernels work with this hardware (should I keep it and try the install again) or should I switch hardware to something more compatible (like an Adaptec card)?
> >>
> >> Thanks!
> >> Bryan
> >>
> >> --
> >> console output:
> >>
> >> tag 0 cmd 0x39 Emask 0x2 stat 0x58 err 0x0 (HSM violation)
> >> exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> >>
> >> --
> >> Output from hdparm -I /dev/sda:
> >>
> >> /dev/sda:
> >>
> >> ATA device, with non-removable media
> >> Model Number: STARDOM V.36.A0B
> >> Serial Number:
> >> Firmware Revision: V.36.A0B
> >> Standards:
> >> Used: ATA/ATAPI-6 T13 1410D revision 0
> >>
> >> [snip]
> >>
> >> Commands/features:
> >> Enabled Supported:
> >> * SMART feature set
> >> * Power Management feature set
> >> * Advanced Power Management feature set
> >> * 48-bit Address feature set
> >> * Mandatory FLUSH_CACHE
> >> * SATA-I signaling speed (1.5 Gb/s)
> >> * SATA-II signaling speed (3.0 Gb/s)
> >>
> >> --
> >> Parts of dmesg:
> >> libata version 2.00 loaded
> >> sata_nv 0000:00:05.0: version 2.0
> >> ata1: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xCC00 irq 21
> >> ata2: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xCC08 irq 21
> >> scsi0 : sata_nv
> >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> >> ata1.00: ATA-6, max UDMA/133,976794112 sectors: LBA48
> >> ata1.00: ata1: dev 0 multi count 1
> >> ata1.00: applying bridge limits
> >> ata1.00: configured for UDMA/100
>
> Please post full dmesg and full 'hdparm -I' result. Also, if possible,
> please try 2.6.22.5. Even if it doesn't fix the problem, it would
> report error conditions better.
Presumably in the week and a half between Bryan's report and your request,
Bryan has gone off and got an adaptec card. Bryan, it would be helpful if
you could rebuild the original systam and help us get to the bottom of this
bug, thanks.
next prev parent reply other threads:[~2007-09-05 16:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <46CFA08E.6090604@arbores.ca>
2007-08-26 23:10 ` Stardom SATA HSM violation Michal Piotrowski
2007-09-03 8:53 ` Tejun Heo
2007-09-05 16:53 ` Andrew Morton [this message]
2007-09-05 17:23 ` Mark Lord
2007-09-05 19:38 ` Andrew Morton
2007-09-05 23:03 ` Mark Lord
2007-09-07 0:58 ` Tejun Heo
2007-09-07 13:40 ` Mark Lord
2007-09-27 7:05 ` Tejun Heo
2007-09-27 18:37 ` Alan Cox
2007-09-27 23:32 ` Tejun Heo
2007-09-27 23:42 ` Jeff Garzik
2007-09-27 23:52 ` Tejun Heo
2007-09-28 3:56 ` [PATCH] libata drain fifo on stuck DRQ " Mark Lord
2007-09-28 9:48 ` Tejun Heo
2007-09-28 9:56 ` Andrew Morton
2007-09-28 10:01 ` Tejun Heo
2007-09-28 10:27 ` Alan Cox
2007-09-28 13:41 ` [PATCH] libata drain fifo on stuck DRQ HSM violation (try#2) Mark Lord
2007-09-29 6:24 ` Jeff Garzik
2007-09-29 1:05 ` [PATCH] libata drain fifo on stuck DRQ HSM violation Jeff Garzik
2007-09-29 6:28 ` Alan Cox
2007-09-29 12:34 ` Mark Lord
2007-09-28 3:52 ` Stardom SATA " Mark Lord
2007-09-06 15:00 ` Bryan Woods
2007-09-07 0:58 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070905095327.6277d054.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=bryan@arbores.ca \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.k.k.piotrowski@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).