From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 5/13] ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag
Date: Wed, 5 Sep 2007 23:52:57 +0200 [thread overview]
Message-ID: <200709052352.57848.bzolnier@gmail.com> (raw)
Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead
of hwif->err_stops_fifo. As a side-effect this change fixes
hwif->err_stops_fifo not being restored by ide_hwif_restore().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-io.c | 3 ++-
drivers/ide/pci/pdc202xx_new.c | 3 +--
drivers/ide/pci/pdc202xx_old.c | 8 ++++----
include/linux/ide.h | 3 ++-
4 files changed, 9 insertions(+), 8 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -519,7 +519,8 @@ static ide_startstop_t ide_ata_error(ide
}
}
- if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && hwif->err_stops_fifo == 0)
+ if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ &&
+ (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0)
try_to_flush_leftover_data(drive);
if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
Index: b/drivers/ide/pci/pdc202xx_new.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -471,8 +471,6 @@ static void __devinit init_hwif_pdc202ne
hwif->quirkproc = &pdcnew_quirkproc;
hwif->resetproc = &pdcnew_reset;
- hwif->err_stops_fifo = 1;
-
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
if (hwif->dma_base == 0)
@@ -510,6 +508,7 @@ static struct pci_dev * __devinit pdc202
.init_chipset = init_chipset_pdcnew, \
.init_hwif = init_hwif_pdc202new, \
.host_flags = IDE_HFLAG_POST_SET_MODE | \
+ IDE_HFLAG_ERROR_STOPS_FIFO | \
IDE_HFLAG_OFF_BOARD, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -317,8 +317,6 @@ static void __devinit init_hwif_pdc202xx
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
hwif->resetproc = &pdc202xx_reset;
- hwif->err_stops_fifo = 1;
-
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
if (hwif->dma_base == 0)
@@ -393,7 +391,8 @@ static void __devinit pdc202ata4_fixup_i
.init_hwif = init_hwif_pdc202xx, \
.init_dma = init_dma_pdc202xx, \
.extra = 48, \
- .host_flags = IDE_HFLAG_OFF_BOARD, \
+ .host_flags = IDE_HFLAG_ERROR_STOPS_FIFO | \
+ IDE_HFLAG_OFF_BOARD, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
@@ -406,7 +405,8 @@ static ide_pci_device_t pdc202xx_chipset
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
.extra = 16,
- .host_flags = IDE_HFLAG_OFF_BOARD,
+ .host_flags = IDE_HFLAG_ERROR_STOPS_FIFO |
+ IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -799,7 +799,6 @@ typedef struct hwif_s {
unsigned auto_poll : 1; /* supports nop auto-poll */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
- unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
@@ -1261,6 +1260,8 @@ enum {
IDE_HFLAG_NO_LBA48 = (1 << 17),
/* no LBA48 DMA */
IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
+ /* data FIFO is cleared by an error */
+ IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
next reply other threads:[~2007-09-05 21:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-05 21:52 Bartlomiej Zolnierkiewicz [this message]
2007-09-06 8:13 ` [PATCH 5/13] ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag Jeff Garzik
2007-09-08 15:17 ` Alan Cox
2007-09-08 15:15 ` Jeff Garzik
2007-09-08 15:27 ` Alan Cox
2007-09-08 16:42 ` Jeff Garzik
2007-09-08 18:38 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709052352.57848.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).