From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 11/13] opti621: always tune PIO
Date: Wed, 5 Sep 2007 23:56:09 +0200 [thread overview]
Message-ID: <200709052356.09790.bzolnier@gmail.com> (raw)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/opti621.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Index: b/drivers/ide/pci/opti621.c
===================================================================
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002
+ * linux/drivers/ide/pci/opti621.c Version 0.8 Aug 27, 2007
*
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/
@@ -57,9 +57,6 @@
* There is a 25/33MHz switch in configuration
* register, but driver is written for use at any frequency which get
* (use idebus=xx to select PCI bus speed).
- * Use hda=autotune and hdb=autotune for automatical tune of the PIO modes.
- * If you get strange results, do not use this and set PIO manually
- * by hdparm.
*
* Version 0.1, Nov 8, 1996
* by Jaromir Koutek, for 2.1.8.
@@ -332,6 +329,9 @@ static void __devinit init_hwif_opti621
hwif->drives[1].drive_data = PIO_DONT_KNOW;
hwif->set_pio_mode = &opti621_set_pio_mode;
+
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
}
static ide_pci_device_t opti621_chipsets[] __devinitdata = {
reply other threads:[~2007-09-05 21:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709052356.09790.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).