From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 3/3] ide: add CONFIG_IDE_ARCH_OBSOLETE_INIT
Date: Wed, 19 Sep 2007 22:11:03 +0200 [thread overview]
Message-ID: <200709192211.03850.bzolnier@gmail.com> (raw)
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead
of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/Kconfig | 3 +++
drivers/ide/setup-pci.c | 2 +-
include/asm-alpha/ide.h | 1 -
include/asm-arm/ide.h | 1 -
include/asm-arm26/ide.h | 1 -
include/asm-blackfin/ide.h | 1 -
include/asm-i386/ide.h | 1 -
include/asm-ia64/ide.h | 1 -
include/asm-m32r/ide.h | 1 -
include/asm-mips/mach-generic/ide.h | 1 -
include/asm-parisc/ide.h | 1 -
include/asm-powerpc/ide.h | 1 -
include/asm-sh64/ide.h | 1 -
include/asm-sparc/ide.h | 1 -
include/asm-sparc64/ide.h | 1 -
include/linux/ide.h | 8 ++------
16 files changed, 6 insertions(+), 20 deletions(-)
Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -1056,6 +1056,9 @@ endif
config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+config IDE_ARCH_OBSOLETE_INIT
+ def_bool ALPHA || (ARM && !ARCH_L7200) || BLACKFIN || X86 || IA64 || M32R || MIPS || PARISC || PPC || (SUPERH64 && BLK_DEV_IDEPCI) || SPARC
+
endif
config BLK_DEV_HD_ONLY
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -388,7 +388,7 @@ static ide_hwif_t *ide_hwif_configure(st
if (hwif->io_ports[IDE_DATA_OFFSET] != base ||
hwif->io_ports[IDE_CONTROL_OFFSET] != (ctl | 2)) {
memset(&hwif->hw, 0, sizeof(hwif->hw));
-#ifndef IDE_ARCH_OBSOLETE_INIT
+#ifndef CONFIG_IDE_ARCH_OBSOLETE_INIT
ide_std_init_ports(&hwif->hw, base, (ctl | 2));
hwif->hw.io_ports[IDE_IRQ_OFFSET] = 0;
#else
Index: b/include/asm-alpha/ide.h
===================================================================
--- a/include/asm-alpha/ide.h
+++ b/include/asm-alpha/ide.h
@@ -40,7 +40,6 @@ static inline unsigned long ide_default_
}
}
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#ifdef CONFIG_PCI
Index: b/include/asm-arm/ide.h
===================================================================
--- a/include/asm-arm/ide.h
+++ b/include/asm-arm/ide.h
@@ -18,7 +18,6 @@
#endif
#if !defined(CONFIG_ARCH_L7200)
-# define IDE_ARCH_OBSOLETE_INIT
# ifdef CONFIG_ARCH_CLPS7500
# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
# else
Index: b/include/asm-arm26/ide.h
===================================================================
--- a/include/asm-arm26/ide.h
+++ b/include/asm-arm26/ide.h
@@ -26,7 +26,6 @@
#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len)
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) (0)
#endif /* __KERNEL__ */
Index: b/include/asm-blackfin/ide.h
===================================================================
--- a/include/asm-blackfin/ide.h
+++ b/include/asm-blackfin/ide.h
@@ -20,7 +20,6 @@
#define MAX_HWIFS 1
/* Legacy ... BLK_DEV_IDECS */
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
Index: b/include/asm-i386/ide.h
===================================================================
--- a/include/asm-i386/ide.h
+++ b/include/asm-i386/ide.h
@@ -62,7 +62,6 @@ static __inline__ unsigned long ide_defa
}
}
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#ifdef CONFIG_BLK_DEV_IDEPCI
Index: b/include/asm-ia64/ide.h
===================================================================
--- a/include/asm-ia64/ide.h
+++ b/include/asm-ia64/ide.h
@@ -46,7 +46,6 @@ static inline unsigned long ide_default_
}
}
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#ifdef CONFIG_PCI
Index: b/include/asm-m32r/ide.h
===================================================================
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -65,7 +65,6 @@ static __inline__ unsigned long ide_defa
}
}
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#ifdef CONFIG_BLK_DEV_IDEPCI
Index: b/include/asm-mips/mach-generic/ide.h
===================================================================
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -98,7 +98,6 @@ static __inline__ unsigned long ide_defa
}
}
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#ifdef CONFIG_BLK_DEV_IDEPCI
Index: b/include/asm-parisc/ide.h
===================================================================
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -17,7 +17,6 @@
#define MAX_HWIFS 2
#endif
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id))
Index: b/include/asm-powerpc/ide.h
===================================================================
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -74,7 +74,6 @@ static __inline__ unsigned long ide_defa
#endif /* __powerpc64__ */
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#endif /* __KERNEL__ */
Index: b/include/asm-sh64/ide.h
===================================================================
--- a/include/asm-sh64/ide.h
+++ b/include/asm-sh64/ide.h
@@ -19,7 +19,6 @@
/* Without this, the initialisation of PCI IDE cards end up calling
* ide_init_hwif_ports, which won't work. */
#ifdef CONFIG_BLK_DEV_IDEPCI
-#define IDE_ARCH_OBSOLETE_INIT 1
#define ide_default_io_ctl(base) (0)
#endif
Index: b/include/asm-sparc/ide.h
===================================================================
--- a/include/asm-sparc/ide.h
+++ b/include/asm-sparc/ide.h
@@ -18,7 +18,6 @@
#undef MAX_HWIFS
#define MAX_HWIFS 2
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#define __ide_insl(data_reg, buffer, wcount) \
Index: b/include/asm-sparc64/ide.h
===================================================================
--- a/include/asm-sparc64/ide.h
+++ b/include/asm-sparc64/ide.h
@@ -24,7 +24,6 @@
# endif
#endif
-#define IDE_ARCH_OBSOLETE_INIT
#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
#define __ide_insl(data_reg, buffer, wcount) \
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -265,11 +265,7 @@ static inline void ide_std_init_ports(hw
# define ide_init_default_irq(base) (0)
#endif
-/*
- * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
- * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
- */
-#ifdef IDE_ARCH_OBSOLETE_INIT
+#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
static inline void ide_init_hwif_ports(hw_regs_t *hw,
unsigned long io_addr,
unsigned long ctl_addr,
@@ -299,7 +295,7 @@ static inline void ide_init_hwif_ports(h
if (io_addr || ctl_addr)
printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
}
-#endif /* IDE_ARCH_OBSOLETE_INIT */
+#endif /* CONFIG_IDE_ARCH_OBSOLETE_INIT */
/* Currently only m68k, apus and m8xx need it */
#ifndef IDE_ARCH_ACK_INTR
next reply other threads:[~2007-09-19 20:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-19 20:11 Bartlomiej Zolnierkiewicz [this message]
2007-10-02 19:39 ` [PATCH 3/3] ide: add CONFIG_IDE_ARCH_OBSOLETE_INIT Sergei Shtylyov
2007-10-02 21:01 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709192211.03850.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).