From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 9/12] ide-disk: use struct ide_taskfile in __ide_do_rw_disk()
Date: Mon, 8 Oct 2007 23:15:49 +0200 [thread overview]
Message-ID: <200710082315.49176.bzolnier@gmail.com> (raw)
Based on the earlier work by Tejun Heo.
There should be no functionality changes caused by this patch.
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-disk.c | 87 ++++++++++++++++++++++++-------------------------
1 file changed, 43 insertions(+), 44 deletions(-)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -166,6 +166,7 @@ static ide_startstop_t __ide_do_rw_disk(
u8 lba48 = (drive->addressing == 1) ? 1 : 0;
u8 command = WIN_NOP;
ata_nsector_t nsectors;
+ struct ide_taskfile ltf, *tf = <f;
nsectors.all = (u16) rq->nr_sectors;
@@ -186,53 +187,36 @@ static ide_startstop_t __ide_do_rw_disk(
/* FIXME: SELECT_MASK(drive, 0) ? */
+ memset(tf, 0, sizeof(*tf));
+
if (drive->select.b.lba) {
if (lba48) {
- u8 tasklets[10];
-
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
- tasklets[0] = 0;
- tasklets[1] = 0;
- tasklets[2] = nsectors.b.low;
- tasklets[3] = nsectors.b.high;
- tasklets[4] = (u8) block;
- tasklets[5] = (u8)(block >> 8);
- tasklets[6] = (u8)(block >> 16);
- tasklets[7] = (u8)(block >> 24);
- if (sizeof(block) == 4) {
- tasklets[8] = 0;
- tasklets[9] = 0;
- } else {
- tasklets[8] = (u8)((u64)block >> 32);
- tasklets[9] = (u8)((u64)block >> 40);
+ tf->hob_nsect = nsectors.b.high;
+ tf->hob_lbal = (u8)(block >> 24);
+ if (sizeof(block) != 4) {
+ tf->hob_lbam = (u8)((u64)block >> 32);
+ tf->hob_lbah = (u8)((u64)block >> 40);
}
+
+ tf->nsect = nsectors.b.low;
+ tf->lbal = (u8) block;
+ tf->lbam = (u8)(block >> 8);
+ tf->lbah = (u8)(block >> 16);
#ifdef DEBUG
printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n",
- drive->name, tasklets[3], tasklets[2],
- tasklets[9], tasklets[8], tasklets[7],
- tasklets[6], tasklets[5], tasklets[4]);
+ drive->name, tf->hob_nsect, tf->nsect,
+ tf->hob_lbah, tf->hob_lbam, tf->hob_lbal,
+ tf->lbah, tf->lbam, tf->lbal);
#endif
- hwif->OUTB(tasklets[1], IDE_FEATURE_REG);
- hwif->OUTB(tasklets[3], IDE_NSECTOR_REG);
- hwif->OUTB(tasklets[7], IDE_SECTOR_REG);
- hwif->OUTB(tasklets[8], IDE_LCYL_REG);
- hwif->OUTB(tasklets[9], IDE_HCYL_REG);
-
- hwif->OUTB(tasklets[0], IDE_FEATURE_REG);
- hwif->OUTB(tasklets[2], IDE_NSECTOR_REG);
- hwif->OUTB(tasklets[4], IDE_SECTOR_REG);
- hwif->OUTB(tasklets[5], IDE_LCYL_REG);
- hwif->OUTB(tasklets[6], IDE_HCYL_REG);
- hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG);
} else {
- hwif->OUTB(0x00, IDE_FEATURE_REG);
- hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
- hwif->OUTB(block, IDE_SECTOR_REG);
- hwif->OUTB(block>>=8, IDE_LCYL_REG);
- hwif->OUTB(block>>=8, IDE_HCYL_REG);
- hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG);
+ tf->nsect = nsectors.b.low;
+ tf->lbal = block;
+ tf->lbam = block >>= 8;
+ tf->lbah = block >>= 8;
+ tf->device = (block >> 8) & 0xf;
}
} else {
unsigned int sect,head,cyl,track;
@@ -243,13 +227,28 @@ static ide_startstop_t __ide_do_rw_disk(
pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
- hwif->OUTB(0x00, IDE_FEATURE_REG);
- hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
- hwif->OUTB(sect, IDE_SECTOR_REG);
- hwif->OUTB(cyl, IDE_LCYL_REG);
- hwif->OUTB(cyl>>8, IDE_HCYL_REG);
- hwif->OUTB(head|drive->select.all,IDE_SELECT_REG);
- }
+ tf->nsect = nsectors.b.low;
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device = head;
+ }
+
+ if (drive->select.b.lba && lba48) {
+ hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG);
+ hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG);
+ hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG);
+ hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG);
+ hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG);
+ }
+
+ hwif->OUTB(tf->feature, IDE_FEATURE_REG);
+ hwif->OUTB(tf->nsect, IDE_NSECTOR_REG);
+ hwif->OUTB(tf->lbal, IDE_SECTOR_REG);
+ hwif->OUTB(tf->lbam, IDE_LCYL_REG);
+ hwif->OUTB(tf->lbah, IDE_HCYL_REG);
+
+ hwif->OUTB(tf->device | drive->select.all, IDE_SELECT_REG);
if (dma) {
if (!hwif->dma_setup(drive)) {
next reply other threads:[~2007-10-08 21:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-08 21:15 Bartlomiej Zolnierkiewicz [this message]
2007-10-18 12:15 ` [PATCH 9/12] ide-disk: use struct ide_taskfile in __ide_do_rw_disk() Sergei Shtylyov
2007-10-18 12:16 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710082315.49176.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).