From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>, linux-ide@vger.kernel.org
Subject: Re: [PATCH 12/15] ide: remove ->dma_master field from ide_hwif_t
Date: Wed, 24 Oct 2007 23:24:52 +0200 [thread overview]
Message-ID: <200710242324.53080.bzolnier@gmail.com> (raw)
In-Reply-To: <47179309.1090906@ru.mvista.com>
Hi,
On Thursday 18 October 2007, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
>
> >>>>Index: b/drivers/ide/pci/hpt366.c
> >>>>===================================================================
> >>>>--- a/drivers/ide/pci/hpt366.c
> >>>>+++ b/drivers/ide/pci/hpt366.c
> >>>>@@ -845,32 +845,33 @@ static int hpt374_ide_dma_end(ide_drive_
>
> >>> This just asks to be:
>
> >> No, it doesn't cause that way one would only break it.
>
> >>>> static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
> >>>> {
>
> >>> unsigned long base = hwif->extra_base;
>
> >> Sorry for a thinko. All offsets below shoud be really 0x6x, not 0x5x...
>
> > Here we go again... :)
>
> > [PATCH] ide: remove ->dma_master field from ide_hwif_t (take 4)
>
> > * Convert cmd64x, hpt366 and pdc202xx_old host drivers to use
> > pci_resource_start(hwif->pci_dev, 4) instead of hwif->dma_master.
>
> > * Remove no longer needed ->dma_master field from ide_hwif_t.
>
> > v2:
> > * Use the more readable 'hwif->dma_base - (hwif->channel * 8)' instead of
> > pci_resource_start(hwif->pci_dev, 4).
>
> > v3:
> > * Use hwif->extra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2
> > (suggested by Sergei).
>
> Huh? I don't see where you're using extra_base in hpt366.c
Doh, somebody hand me brown paper bag, please...
> > v4:
> > * Correct offsets in hpt3xxn_set_clock().
>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>
> Unfortunately, I have to NAK the patch... :-/
>
> > Index: b/drivers/ide/pci/hpt366.c
> > ===================================================================
> > --- a/drivers/ide/pci/hpt366.c
> > +++ b/drivers/ide/pci/hpt366.c
> > @@ -845,32 +845,33 @@ static int hpt374_ide_dma_end(ide_drive_
> >
> > static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
> > {
> > - u8 scr2 = inb(hwif->dma_master + 0x7b);
> > + unsigned long base = hwif->dma_base - (hwif->channel * 8);
>
> Should be hwif->extra_base - 0x10 or else the following code will touch
> all the wrong/reserved registers; one also can use hwif->extra_base ISO 'base'
> and change all the offsets to 0x6x...
Well, I updated all offsets but I somehow forgot about updating 'base'. :)
> > + u8 scr2 = inb(base + 0x6b);
> >
> > if ((scr2 & 0x7f) == mode)
> > return;
> >
> > /* Tristate the bus */
> > - outb(0x80, hwif->dma_master + 0x73);
> > - outb(0x80, hwif->dma_master + 0x77);
> > + outb(0x80, base + 0x63);
> > + outb(0x80, base + 0x67);
>
> > /* Switch clock and reset channels */
> > - outb(mode, hwif->dma_master + 0x7b);
> > - outb(0xc0, hwif->dma_master + 0x79);
> > + outb(mode, base + 0x6b);
> > + outb(0xc0, base + 0x69);
> >
> > /*
> > * Reset the state machines.
> > * NOTE: avoid accidentally enabling the disabled channels.
> > */
> > - outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70);
> > - outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74);
> > + outb(inb(base + 0x60) | 0x32, base + 0x60);
> > + outb(inb(base + 0x64) | 0x32, base + 0x64);
> >
> > /* Complete reset */
> > - outb(0x00, hwif->dma_master + 0x79);
> > + outb(0x00, base + 0x69);
> >
> > /* Reconnect channels to bus */
> > - outb(0x00, hwif->dma_master + 0x73);
> > - outb(0x00, hwif->dma_master + 0x77);
> > + outb(0x00, base + 0x63);
> > + outb(0x00, base + 0x67);
> > }
>
> Huh? That's wrong -- if you're setting base to the value of the former
> value of hwof->dma_master, the register offsets shouldn't change!
>
> > Index: b/drivers/ide/pci/pdc202xx_old.c
> > ===================================================================
> > --- a/drivers/ide/pci/pdc202xx_old.c
> > +++ b/drivers/ide/pci/pdc202xx_old.c
> > @@ -193,7 +193,7 @@ static void pdc202xx_old_ide_dma_start(i
> > if (drive->media != ide_disk || drive->addressing == 1) {
> > struct request *rq = HWGROUP(drive)->rq;
> > ide_hwif_t *hwif = HWIF(drive);
> > - unsigned long high_16 = hwif->dma_master;
> > + unsigned long high_16 = hwif->extra_base - 16;
> > unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
>
> That 'high_16' is *not* a good name in this case -- it would've been if we
> didn't subtract 16. So, I'd wrote:
>
> unsigned long atapi_reg = hwif->extra_base +
> (hwif->channel ? 0x14 : 0x10);
'high_16' is used for more than 'atapi_reg' (same is true for other places
defining 'high_16' local variable). With five revisions of this patch
needed to hopefully, finally get it right I prefer to defer futher cleanups
to the incremental patches (*hint*).
[PATCH] ide: remove ->dma_master field from ide_hwif_t (take 5)
* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use
pci_resource_start(hwif->pci_dev, 4) instead of hwif->dma_master.
* Remove no longer needed ->dma_master field from ide_hwif_t.
v2:
* Use the more readable 'hwif->dma_base - (hwif->channel * 8)' instead of
pci_resource_start(hwif->pci_dev, 4).
v3:
* Use hwif->extra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2
(suggested by Sergei).
v4:
* Correct offsets in hpt3xxn_set_clock().
v5:
* Use hwif->extra_base in hpt366 for _real_ this time. (Noticed by Sergei)
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-dma.c | 7 -------
drivers/ide/ide.c | 2 --
drivers/ide/pci/cmd64x.c | 8 +++++---
drivers/ide/pci/hpt366.c | 21 +++++++++++----------
drivers/ide/pci/pdc202xx_old.c | 12 ++++++------
include/linux/ide.h | 1 -
6 files changed, 22 insertions(+), 29 deletions(-)
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -1002,11 +1002,6 @@ void ide_setup_dma(ide_hwif_t *hwif, uns
hwif->dma_base = base;
- if (hwif->mate)
- hwif->dma_master = hwif->channel ? hwif->mate->dma_base : base;
- else
- hwif->dma_master = base;
-
if (!(hwif->dma_command))
hwif->dma_command = hwif->dma_base;
if (!(hwif->dma_vendor1))
@@ -1048,8 +1043,6 @@ void ide_setup_dma(ide_hwif_t *hwif, uns
hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio");
}
printk("\n");
-
- BUG_ON(!hwif->dma_master);
}
EXPORT_SYMBOL_GPL(ide_setup_dma);
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -468,7 +468,6 @@ static void ide_hwif_restore(ide_hwif_t
#endif
hwif->dma_base = tmp_hwif->dma_base;
- hwif->dma_master = tmp_hwif->dma_master;
hwif->dma_command = tmp_hwif->dma_command;
hwif->dma_vendor1 = tmp_hwif->dma_vendor1;
hwif->dma_status = tmp_hwif->dma_status;
@@ -602,7 +601,6 @@ void ide_unregister(unsigned int index)
(void) ide_release_dma(hwif);
hwif->dma_base = 0;
- hwif->dma_master = 0;
hwif->dma_command = 0;
hwif->dma_vendor1 = 0;
hwif->dma_status = 0;
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -333,13 +333,14 @@ static void cmd64x_set_dma_mode(ide_driv
static int cmd648_ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ unsigned long base = hwif->dma_base - (hwif->channel * 8);
int err = __ide_dma_end(drive);
u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
- u8 mrdmode = inb(hwif->dma_master + 0x01);
+ u8 mrdmode = inb(base + 1);
/* clear the interrupt bit */
- outb(mrdmode | irq_mask, hwif->dma_master + 0x01);
+ outb(mrdmode | irq_mask, base + 1);
return err;
}
@@ -364,10 +365,11 @@ static int cmd64x_ide_dma_end (ide_drive
static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ unsigned long base = hwif->dma_base - (hwif->channel * 8);
u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
u8 dma_stat = inb(hwif->dma_status);
- u8 mrdmode = inb(hwif->dma_master + 0x01);
+ u8 mrdmode = inb(base + 1);
#ifdef DEBUG
printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -845,32 +845,33 @@ static int hpt374_ide_dma_end(ide_drive_
static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
{
- u8 scr2 = inb(hwif->dma_master + 0x7b);
+ unsigned long base = hwif->extra_base;
+ u8 scr2 = inb(base + 0x6b);
if ((scr2 & 0x7f) == mode)
return;
/* Tristate the bus */
- outb(0x80, hwif->dma_master + 0x73);
- outb(0x80, hwif->dma_master + 0x77);
+ outb(0x80, base + 0x63);
+ outb(0x80, base + 0x67);
/* Switch clock and reset channels */
- outb(mode, hwif->dma_master + 0x7b);
- outb(0xc0, hwif->dma_master + 0x79);
+ outb(mode, base + 0x6b);
+ outb(0xc0, base + 0x69);
/*
* Reset the state machines.
* NOTE: avoid accidentally enabling the disabled channels.
*/
- outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70);
- outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74);
+ outb(inb(base + 0x60) | 0x32, base + 0x60);
+ outb(inb(base + 0x64) | 0x32, base + 0x64);
/* Complete reset */
- outb(0x00, hwif->dma_master + 0x79);
+ outb(0x00, base + 0x69);
/* Reconnect channels to bus */
- outb(0x00, hwif->dma_master + 0x73);
- outb(0x00, hwif->dma_master + 0x77);
+ outb(0x00, base + 0x63);
+ outb(0x00, base + 0x67);
}
/**
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -162,7 +162,7 @@ static u8 pdc202xx_old_cable_detect (ide
*/
static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
{
- unsigned long clock_reg = hwif->dma_master + 0x11;
+ unsigned long clock_reg = hwif->extra_base + 0x01;
u8 clock = inb(clock_reg);
outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
@@ -170,7 +170,7 @@ static void pdc_old_enable_66MHz_clock(i
static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
{
- unsigned long clock_reg = hwif->dma_master + 0x11;
+ unsigned long clock_reg = hwif->extra_base + 0x01;
u8 clock = inb(clock_reg);
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
@@ -193,7 +193,7 @@ static void pdc202xx_old_ide_dma_start(i
if (drive->media != ide_disk || drive->addressing == 1) {
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u32 word_count = 0;
u8 clock = inb(high_16 + 0x11);
@@ -212,7 +212,7 @@ static int pdc202xx_old_ide_dma_end(ide_
{
if (drive->media != ide_disk || drive->addressing == 1) {
ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u8 clock = 0;
@@ -228,7 +228,7 @@ static int pdc202xx_old_ide_dma_end(ide_
static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
u8 dma_stat = inb(hwif->dma_status);
u8 sc1d = inb(high_16 + 0x001d);
@@ -271,7 +271,7 @@ static void pdc202xx_dma_timeout(ide_dri
static void pdc202xx_reset_host (ide_hwif_t *hwif)
{
- unsigned long high_16 = hwif->dma_master;
+ unsigned long high_16 = hwif->extra_base - 16;
u8 udma_speed_flag = inb(high_16 | 0x001f);
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -766,7 +766,6 @@ typedef struct hwif_s {
int rqsize; /* max sectors per request */
int irq; /* our irq number */
- unsigned long dma_master; /* reference base addr dmabase */
unsigned long dma_base; /* base addr for dma ports */
unsigned long dma_command; /* dma command register */
unsigned long dma_vendor1; /* dma vendor 1 register */
next prev parent reply other threads:[~2007-10-24 23:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-01 21:39 [PATCH 12/15] ide: remove ->dma_master field from ide_hwif_t Bartlomiej Zolnierkiewicz
2007-10-01 21:48 ` Jeff Garzik
2007-10-01 22:06 ` Bartlomiej Zolnierkiewicz
2007-10-01 22:31 ` Jeff Garzik
2007-10-02 21:24 ` Bartlomiej Zolnierkiewicz
2007-10-03 12:50 ` Sergei Shtylyov
2007-10-03 22:27 ` Bartlomiej Zolnierkiewicz
2007-10-04 13:27 ` Sergei Shtylyov
2007-10-08 21:03 ` Bartlomiej Zolnierkiewicz
2007-10-18 17:08 ` Sergei Shtylyov
2007-10-24 21:24 ` Bartlomiej Zolnierkiewicz [this message]
2007-10-25 15:01 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710242324.53080.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).