From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 7/15] ide: remove atapi_ireason_t
Date: Wed, 31 Oct 2007 00:28:27 +0100 [thread overview]
Message-ID: <200710310028.27935.bzolnier@gmail.com> (raw)
Remove atapi_ireason_t.
While at it:
* replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-floppy.c | 25 ++++++++++++-------------
drivers/ide/ide-tape.c | 27 +++++++++++++--------------
drivers/scsi/ide-scsi.c | 17 ++++++++---------
include/linux/ide.h | 24 ------------------------
4 files changed, 33 insertions(+), 60 deletions(-)
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -788,12 +788,11 @@ static ide_startstop_t idefloppy_pc_intr
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- atapi_ireason_t ireason;
idefloppy_pc_t *pc = floppy->pc;
struct request *rq = pc->rq;
unsigned int temp;
u16 bcount;
- u8 stat;
+ u8 stat, ireason;
debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
__FUNCTION__);
@@ -852,18 +851,18 @@ static ide_startstop_t idefloppy_pc_intr
bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
hwif->INB(IDE_BCOUNTL_REG);
/* on this interrupt */
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
- if (ireason.b.cod) {
+ if (ireason & 1) {
printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n");
return ide_do_reset(drive);
}
- if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) {
+ if ((ireason & 1) == test_bit(PC_WRITING, &pc->flags)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "ide-floppy: We wanted to %s, ",
- ireason.b.io ? "Write":"Read");
+ (ireason & 1) ? "Write" : "Read");
printk(KERN_ERR "but the floppy wants us to %s !\n",
- ireason.b.io ? "Read":"Write");
+ (ireason & 1) ? "Read" : "Write");
return ide_do_reset(drive);
}
if (!test_bit(PC_WRITING, &pc->flags)) {
@@ -920,15 +919,15 @@ static ide_startstop_t idefloppy_transfe
{
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
- atapi_ireason_t ireason;
+ u8 ireason;
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
printk(KERN_ERR "ide-floppy: Strange, packet command "
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
+ ireason = drive->hwif->INB(IDE_IREASON_REG);
+ if ((ireason & 2) == 0 || (ireason & 1)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
return ide_do_reset(drive);
@@ -968,15 +967,15 @@ static ide_startstop_t idefloppy_transfe
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
- atapi_ireason_t ireason;
+ u8 ireason;
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
printk(KERN_ERR "ide-floppy: Strange, packet command "
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
+ ireason = drive->hwif->INB(IDE_IREASON_REG);
+ if ((ireason & 2) == 0 || (ireason & 1)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
"while issuing a packet command\n");
return ide_do_reset(drive);
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1847,14 +1847,13 @@ static ide_startstop_t idetape_pc_intr (
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- atapi_ireason_t ireason;
idetape_pc_t *pc = tape->pc;
unsigned int temp;
#if SIMULATE_ERRORS
static int error_sim_count = 0;
#endif
u16 bcount;
- u8 stat;
+ u8 stat, ireason;
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 4)
@@ -1965,18 +1964,18 @@ static ide_startstop_t idetape_pc_intr (
bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
hwif->INB(IDE_BCOUNTL_REG);
- ireason.all = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
- if (ireason.b.cod) {
+ if (ireason & 2) {
printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n");
return ide_do_reset(drive);
}
- if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) {
+ if ((ireason & 1) == test_bit(PC_WRITING, &pc->flags)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "ide-tape: We wanted to %s, ",
- ireason.b.io ? "Write":"Read");
+ (ireason & 1) ? "Write" : "Read");
printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n",
- ireason.b.io ? "Read":"Write");
+ (ireason & 1) ? "Read" : "Write");
return ide_do_reset(drive);
}
if (!test_bit(PC_WRITING, &pc->flags)) {
@@ -2070,28 +2069,28 @@ static ide_startstop_t idetape_transfer_
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
- atapi_ireason_t ireason;
int retries = 100;
ide_startstop_t startstop;
+ u8 ireason;
if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = hwif->INB(IDE_IREASON_REG);
- while (retries-- && (!ireason.b.cod || ireason.b.io)) {
+ ireason = hwif->INB(IDE_IREASON_REG);
+ while (retries-- && ((ireason & 2) == 0 || (ireason & 1))) {
printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing "
"a packet command, retrying\n");
udelay(100);
- ireason.all = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
if (retries == 0) {
printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while "
"issuing a packet command, ignoring\n");
- ireason.b.cod = 1;
- ireason.b.io = 0;
+ ireason |= 2; /* set CoD */
+ ireason &= ~1; /* clear IO */
}
}
- if (!ireason.b.cod || ireason.b.io) {
+ if ((ireason & 2) == 0 || (ireason & 1)) {
printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing "
"a packet command\n");
return ide_do_reset(drive);
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -403,10 +403,9 @@ static ide_startstop_t idescsi_pc_intr (
ide_hwif_t *hwif = drive->hwif;
idescsi_pc_t *pc = scsi->pc;
struct request *rq = pc->rq;
- atapi_ireason_t ireason;
unsigned int temp;
u16 bcount;
- u8 stat;
+ u8 stat, ireason;
#if IDESCSI_DEBUG_LOG
printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
@@ -444,13 +443,13 @@ static ide_startstop_t idescsi_pc_intr (
}
bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
hwif->INB(IDE_BCOUNTL_REG);
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(IDE_IREASON_REG);
- if (ireason.b.cod) {
+ if (ireason & 2) {
printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
return ide_do_reset (drive);
}
- if (ireason.b.io) {
+ if (ireason & 1) {
temp = pc->actually_transferred + bcount;
if (temp > pc->request_transfer) {
if (temp > pc->buffer_size) {
@@ -479,7 +478,7 @@ static ide_startstop_t idescsi_pc_intr (
#endif /* IDESCSI_DEBUG_LOG */
}
}
- if (ireason.b.io) {
+ if (ireason & 1) {
clear_bit(PC_WRITING, &pc->flags);
if (pc->sg)
idescsi_input_buffers(drive, pc, bcount);
@@ -508,16 +507,16 @@ static ide_startstop_t idescsi_transfer_
ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
idescsi_pc_t *pc = scsi->pc;
- atapi_ireason_t ireason;
ide_startstop_t startstop;
+ u8 ireason;
if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
printk(KERN_ERR "ide-scsi: Strange, packet command "
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
+ ireason = hwif->INB(IDE_IREASON_REG);
+ if ((ireason & 2) == 0 || (ireason & 1)) {
printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
return ide_do_reset (drive);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -346,30 +346,6 @@ typedef union {
} select_t, ata_select_t;
/*
- * ATAPI Interrupt Reason Register.
- *
- * cod : Information transferred is command (1) or data (0)
- * io : The device requests us to read (1) or write (0)
- * reserved : Reserved
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned cod :1;
- unsigned io :1;
- unsigned reserved :6;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved :6;
- unsigned io :1;
- unsigned cod :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} atapi_ireason_t;
-
-/*
* Status returned from various ide_ functions
*/
typedef enum {
next reply other threads:[~2007-10-30 23:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-30 23:28 Bartlomiej Zolnierkiewicz [this message]
2007-11-02 20:21 ` [PATCH 7/15] ide: remove atapi_ireason_t Bartlomiej Zolnierkiewicz
2007-11-04 14:57 ` Sergei Shtylyov
2007-11-05 20:24 ` Bartlomiej Zolnierkiewicz
2007-11-06 18:01 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710310028.27935.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).