* [PATCH 6/9] ide: remove 'handler' field from ide_task_t
@ 2007-11-02 22:05 Bartlomiej Zolnierkiewicz
2007-11-03 3:00 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 3+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-11-02 22:05 UTC (permalink / raw)
To: linux-ide
* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests
which require custom handlers. Check the flag in do_rw_taskfile() and set
handler accordingly.
* Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to
ide_tf_set_{specify,restore,setmult}_cmd().
* Make {set_geometry,recal,set_multmode}_intr() static.
* Remove no longer needed 'handler' field from ide_task_t.
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-io.c | 41 ++++++++++++++++++-----------------------
drivers/ide/ide-taskfile.c | 28 +++++++++++++++++++---------
include/linux/ide.h | 5 +----
3 files changed, 38 insertions(+), 36 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -637,32 +637,26 @@ static ide_startstop_t drive_cmd_intr (i
return ide_stopped;
}
-static void ide_init_specify_cmd(ide_drive_t *drive, ide_task_t *task)
+static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
- task->tf.nsect = drive->sect;
- task->tf.lbal = drive->sect;
- task->tf.lbam = drive->cyl;
- task->tf.lbah = drive->cyl >> 8;
- task->tf.device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
- task->tf.command = WIN_SPECIFY;
-
- task->handler = &set_geometry_intr;
+ tf->nsect = drive->sect;
+ tf->lbal = drive->sect;
+ tf->lbam = drive->cyl;
+ tf->lbah = drive->cyl >> 8;
+ tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
+ tf->command = WIN_SPECIFY;
}
-static void ide_init_restore_cmd(ide_drive_t *drive, ide_task_t *task)
+static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
- task->tf.nsect = drive->sect;
- task->tf.command = WIN_RESTORE;
-
- task->handler = &recal_intr;
+ tf->nsect = drive->sect;
+ tf->command = WIN_RESTORE;
}
-static void ide_init_setmult_cmd(ide_drive_t *drive, ide_task_t *task)
+static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
- task->tf.nsect = drive->mult_req;
- task->tf.command = WIN_SETMULT;
-
- task->handler = &set_multmode_intr;
+ tf->nsect = drive->mult_req;
+ tf->command = WIN_SETMULT;
}
static ide_startstop_t ide_disk_special(ide_drive_t *drive)
@@ -675,15 +669,15 @@ static ide_startstop_t ide_disk_special(
if (s->b.set_geometry) {
s->b.set_geometry = 0;
- ide_init_specify_cmd(drive, &args);
+ ide_tf_set_specify_cmd(drive, &args.tf);
} else if (s->b.recalibrate) {
s->b.recalibrate = 0;
- ide_init_restore_cmd(drive, &args);
+ ide_tf_set_restore_cmd(drive, &args.tf);
} else if (s->b.set_multmode) {
s->b.set_multmode = 0;
if (drive->mult_req > drive->id->max_multsect)
drive->mult_req = drive->id->max_multsect;
- ide_init_setmult_cmd(drive, &args);
+ ide_tf_set_setmult_cmd(drive, &args.tf);
} else if (s->all) {
int special = s->all;
s->all = 0;
@@ -691,7 +685,8 @@ static ide_startstop_t ide_disk_special(
return ide_stopped;
}
- args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE;
+ args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
+ IDE_TFLAG_CUSTOM_HANDLER;
do_rw_taskfile(drive, &args);
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -151,12 +151,15 @@ static int inline task_dma_ok(ide_task_t
}
static ide_startstop_t task_no_data_intr(ide_drive_t *);
-static ide_startstop_t task_out_intr(ide_drive_t *);
+static ide_startstop_t set_geometry_intr(ide_drive_t *);
+static ide_startstop_t recal_intr(ide_drive_t *);
+static ide_startstop_t set_multmode_intr(ide_drive_t *);
ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = HWIF(drive);
struct ide_taskfile *tf = &task->tf;
+ ide_handler_t *handler;
if (task->data_phase == TASKFILE_MULTI_IN ||
task->data_phase == TASKFILE_MULTI_OUT) {
@@ -175,19 +178,26 @@ ide_startstop_t do_rw_taskfile (ide_driv
switch (task->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
- task->handler = task_out_intr;
hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG);
ndelay(400); /* FIXME */
return pre_task_out_intr(drive, task->rq);
case TASKFILE_MULTI_IN:
case TASKFILE_IN:
- task->handler = task_in_intr;
+ handler = task_in_intr;
/* fall-through */
case TASKFILE_NO_DATA:
+ if (handler == NULL)
+ handler = task_no_data_intr;
/* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */
- if (task->handler == NULL)
- task->handler = task_no_data_intr;
- ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL);
+ if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) {
+ switch (tf->command) {
+ case WIN_SPECIFY: handler = set_geometry_intr; break;
+ case WIN_RESTORE: handler = recal_intr; break;
+ case WIN_SETMULT: handler = set_multmode_intr; break;
+ }
+ }
+ ide_execute_command(drive, tf->command, handler,
+ WAIT_WORSTCASE, NULL);
return ide_started;
default:
if (task_dma_ok(task) == 0 || drive->using_dma == 0 ||
@@ -202,7 +212,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
/*
* set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd.
*/
-ide_startstop_t set_multmode_intr (ide_drive_t *drive)
+static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat;
@@ -220,7 +230,7 @@ ide_startstop_t set_multmode_intr (ide_d
/*
* set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd.
*/
-ide_startstop_t set_geometry_intr (ide_drive_t *drive)
+static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
int retries = 5;
@@ -243,7 +253,7 @@ ide_startstop_t set_geometry_intr (ide_d
/*
* recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd.
*/
-ide_startstop_t recal_intr (ide_drive_t *drive)
+static ide_startstop_t recal_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -918,6 +918,7 @@ enum {
IDE_TFLAG_WRITE = (1 << 15),
IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
IDE_TFLAG_IN_DATA = (1 << 17),
+ IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
};
struct ide_taskfile {
@@ -956,7 +957,6 @@ typedef struct ide_task_s {
};
u32 tf_flags;
int data_phase;
- ide_handler_t *handler;
struct request *rq; /* copy of request */
void *special; /* valid_t generally */
} ide_task_t;
@@ -977,9 +977,6 @@ void ide_pktcmd_tf_load(ide_drive_t *, u
*/
extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
-extern ide_startstop_t set_multmode_intr(ide_drive_t *);
-extern ide_startstop_t set_geometry_intr(ide_drive_t *);
-extern ide_startstop_t recal_intr(ide_drive_t *);
extern ide_startstop_t task_in_intr(ide_drive_t *);
extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 6/9] ide: remove 'handler' field from ide_task_t
2007-11-02 22:05 [PATCH 6/9] ide: remove 'handler' field from ide_task_t Bartlomiej Zolnierkiewicz
@ 2007-11-03 3:00 ` Bartlomiej Zolnierkiewicz
2007-11-29 17:37 ` Sergei Shtylyov
0 siblings, 1 reply; 3+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-11-03 3:00 UTC (permalink / raw)
To: linux-ide
On Friday 02 November 2007, Bartlomiej Zolnierkiewicz wrote:
>
> * Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests
> which require custom handlers. Check the flag in do_rw_taskfile() and set
> handler accordingly.
>
> * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to
> ide_tf_set_{specify,restore,setmult}_cmd().
>
> * Make {set_geometry,recal,set_multmode}_intr() static.
>
> * Remove no longer needed 'handler' field from ide_task_t.
>
> There should be no functionality changes caused by this patch.
except that it doesn't work 8) working version below
[PATCH] ide: remove 'handler' field from ide_task_t (take 2)
* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests
which require custom handlers. Check the flag in do_rw_taskfile() and set
handler accordingly.
* Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to
ide_tf_set_{specify,restore,setmult}_cmd().
* Make {set_geometry,recal,set_multmode}_intr() static.
* Remove no longer needed 'handler' field from ide_task_t.
v2:
* 'handler' in do_rw_taskfile() must be set to NULL initially.
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-io.c | 41 ++++++++++++++++++-----------------------
drivers/ide/ide-taskfile.c | 28 +++++++++++++++++++---------
include/linux/ide.h | 5 +----
3 files changed, 38 insertions(+), 36 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -637,32 +637,26 @@ static ide_startstop_t drive_cmd_intr (i
return ide_stopped;
}
-static void ide_init_specify_cmd(ide_drive_t *drive, ide_task_t *task)
+static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
- task->tf.nsect = drive->sect;
- task->tf.lbal = drive->sect;
- task->tf.lbam = drive->cyl;
- task->tf.lbah = drive->cyl >> 8;
- task->tf.device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
- task->tf.command = WIN_SPECIFY;
-
- task->handler = &set_geometry_intr;
+ tf->nsect = drive->sect;
+ tf->lbal = drive->sect;
+ tf->lbam = drive->cyl;
+ tf->lbah = drive->cyl >> 8;
+ tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
+ tf->command = WIN_SPECIFY;
}
-static void ide_init_restore_cmd(ide_drive_t *drive, ide_task_t *task)
+static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
- task->tf.nsect = drive->sect;
- task->tf.command = WIN_RESTORE;
-
- task->handler = &recal_intr;
+ tf->nsect = drive->sect;
+ tf->command = WIN_RESTORE;
}
-static void ide_init_setmult_cmd(ide_drive_t *drive, ide_task_t *task)
+static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
- task->tf.nsect = drive->mult_req;
- task->tf.command = WIN_SETMULT;
-
- task->handler = &set_multmode_intr;
+ tf->nsect = drive->mult_req;
+ tf->command = WIN_SETMULT;
}
static ide_startstop_t ide_disk_special(ide_drive_t *drive)
@@ -675,15 +669,15 @@ static ide_startstop_t ide_disk_special(
if (s->b.set_geometry) {
s->b.set_geometry = 0;
- ide_init_specify_cmd(drive, &args);
+ ide_tf_set_specify_cmd(drive, &args.tf);
} else if (s->b.recalibrate) {
s->b.recalibrate = 0;
- ide_init_restore_cmd(drive, &args);
+ ide_tf_set_restore_cmd(drive, &args.tf);
} else if (s->b.set_multmode) {
s->b.set_multmode = 0;
if (drive->mult_req > drive->id->max_multsect)
drive->mult_req = drive->id->max_multsect;
- ide_init_setmult_cmd(drive, &args);
+ ide_tf_set_setmult_cmd(drive, &args.tf);
} else if (s->all) {
int special = s->all;
s->all = 0;
@@ -691,7 +685,8 @@ static ide_startstop_t ide_disk_special(
return ide_stopped;
}
- args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE;
+ args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
+ IDE_TFLAG_CUSTOM_HANDLER;
do_rw_taskfile(drive, &args);
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -151,12 +151,15 @@ static int inline task_dma_ok(ide_task_t
}
static ide_startstop_t task_no_data_intr(ide_drive_t *);
-static ide_startstop_t task_out_intr(ide_drive_t *);
+static ide_startstop_t set_geometry_intr(ide_drive_t *);
+static ide_startstop_t recal_intr(ide_drive_t *);
+static ide_startstop_t set_multmode_intr(ide_drive_t *);
ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = HWIF(drive);
struct ide_taskfile *tf = &task->tf;
+ ide_handler_t *handler = NULL;
if (task->data_phase == TASKFILE_MULTI_IN ||
task->data_phase == TASKFILE_MULTI_OUT) {
@@ -175,19 +178,26 @@ ide_startstop_t do_rw_taskfile (ide_driv
switch (task->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
- task->handler = task_out_intr;
hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG);
ndelay(400); /* FIXME */
return pre_task_out_intr(drive, task->rq);
case TASKFILE_MULTI_IN:
case TASKFILE_IN:
- task->handler = task_in_intr;
+ handler = task_in_intr;
/* fall-through */
case TASKFILE_NO_DATA:
+ if (handler == NULL)
+ handler = task_no_data_intr;
/* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */
- if (task->handler == NULL)
- task->handler = task_no_data_intr;
- ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL);
+ if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) {
+ switch (tf->command) {
+ case WIN_SPECIFY: handler = set_geometry_intr; break;
+ case WIN_RESTORE: handler = recal_intr; break;
+ case WIN_SETMULT: handler = set_multmode_intr; break;
+ }
+ }
+ ide_execute_command(drive, tf->command, handler,
+ WAIT_WORSTCASE, NULL);
return ide_started;
default:
if (task_dma_ok(task) == 0 || drive->using_dma == 0 ||
@@ -202,7 +212,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
/*
* set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd.
*/
-ide_startstop_t set_multmode_intr (ide_drive_t *drive)
+static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat;
@@ -220,7 +230,7 @@ ide_startstop_t set_multmode_intr (ide_d
/*
* set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd.
*/
-ide_startstop_t set_geometry_intr (ide_drive_t *drive)
+static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
int retries = 5;
@@ -243,7 +253,7 @@ ide_startstop_t set_geometry_intr (ide_d
/*
* recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd.
*/
-ide_startstop_t recal_intr (ide_drive_t *drive)
+static ide_startstop_t recal_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -918,6 +918,7 @@ enum {
IDE_TFLAG_WRITE = (1 << 15),
IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
IDE_TFLAG_IN_DATA = (1 << 17),
+ IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
};
struct ide_taskfile {
@@ -956,7 +957,6 @@ typedef struct ide_task_s {
};
u32 tf_flags;
int data_phase;
- ide_handler_t *handler;
struct request *rq; /* copy of request */
void *special; /* valid_t generally */
} ide_task_t;
@@ -977,9 +977,6 @@ void ide_pktcmd_tf_load(ide_drive_t *, u
*/
extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
-extern ide_startstop_t set_multmode_intr(ide_drive_t *);
-extern ide_startstop_t set_geometry_intr(ide_drive_t *);
-extern ide_startstop_t recal_intr(ide_drive_t *);
extern ide_startstop_t task_in_intr(ide_drive_t *);
extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 6/9] ide: remove 'handler' field from ide_task_t
2007-11-03 3:00 ` Bartlomiej Zolnierkiewicz
@ 2007-11-29 17:37 ` Sergei Shtylyov
0 siblings, 0 replies; 3+ messages in thread
From: Sergei Shtylyov @ 2007-11-29 17:37 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: linux-ide
Bartlomiej Zolnierkiewicz wrote:
>>* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests
>> which require custom handlers. Check the flag in do_rw_taskfile() and set
>> handler accordingly.
>>* Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to
>> ide_tf_set_{specify,restore,setmult}_cmd().
>>* Make {set_geometry,recal,set_multmode}_intr() static.
>>* Remove no longer needed 'handler' field from ide_task_t.
>>There should be no functionality changes caused by this patch.
> except that it doesn't work 8) working version below
> [PATCH] ide: remove 'handler' field from ide_task_t (take 2)
> * Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests
> which require custom handlers. Check the flag in do_rw_taskfile() and set
> handler accordingly.
> * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to
> ide_tf_set_{specify,restore,setmult}_cmd().
> * Make {set_geometry,recal,set_multmode}_intr() static.
> * Remove no longer needed 'handler' field from ide_task_t.
> v2:
> * 'handler' in do_rw_taskfile() must be set to NULL initially.
> There should be no functionality changes caused by this patch.
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
MBR, Sergei
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-11-29 17:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-02 22:05 [PATCH 6/9] ide: remove 'handler' field from ide_task_t Bartlomiej Zolnierkiewicz
2007-11-03 3:00 ` Bartlomiej Zolnierkiewicz
2007-11-29 17:37 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).