From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartlomiej Zolnierkiewicz Subject: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig Date: Sun, 18 Nov 2007 23:17:04 +0100 Message-ID: <200711182317.04300.bzolnier@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from ug-out-1314.google.com ([66.249.92.174]:48819 "EHLO ug-out-1314.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752908AbXKRWge (ORCPT ); Sun, 18 Nov 2007 17:36:34 -0500 Received: by ug-out-1314.google.com with SMTP id z38so873018ugc for ; Sun, 18 Nov 2007 14:36:34 -0800 (PST) Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Cc: Mikael Starvik * Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig to drivers/ide/Kconfig. * Don't force selecting ide-disk and ide-cd device drivers (please handle this through defconfig if necessary). * Make ETRAX_IDE depend on BROKEN for the time being (it doesn't even compile currently). Cc: Mikael Starvik Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/cris/arch-v10/drivers/Kconfig | 39 ------------------------------------- arch/cris/arch-v32/drivers/Kconfig | 12 ----------- drivers/ide/Kconfig | 35 +++++++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+), 51 deletions(-) Index: b/arch/cris/arch-v10/drivers/Kconfig =================================================================== --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -542,45 +542,6 @@ config ETRAX_RS485_DISABLE_RECEIVER loopback. Not all products are able to do this in software only. Axis 2400/2401 must disable receiver. -config ETRAX_IDE - bool "ATA/IDE support" - select IDE - select BLK_DEV_IDE - select BLK_DEV_IDEDISK - select BLK_DEV_IDECD - select BLK_DEV_IDEDMA - select IDE_GENERIC - help - Enable this to get support for ATA/IDE. - You can't use parallel ports or SCSI ports - at the same time. - - -config ETRAX_IDE_DELAY - int "Delay for drives to regain consciousness" - depends on ETRAX_IDE - default 15 - help - Number of seconds to wait for IDE drives to spin up after an IDE - reset. -choice - prompt "IDE reset pin" - depends on ETRAX_IDE - default ETRAX_IDE_PB7_RESET - -config ETRAX_IDE_PB7_RESET - bool "Port_PB_Bit_7" - help - IDE reset on pin 7 on port B - -config ETRAX_IDE_G27_RESET - bool "Port_G_Bit_27" - help - IDE reset on pin 27 on port G - -endchoice - - config ETRAX_USB_HOST bool "USB host" select USB Index: b/arch/cris/arch-v32/drivers/Kconfig =================================================================== --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -582,18 +582,6 @@ config ETRAX_PE_CHANGEABLE_BITS that a user can change the value on using ioctl's. Bit set = changeable. -config ETRAX_IDE - bool "ATA/IDE support" - depends on ETRAX_ARCH_V32 - select IDE - select BLK_DEV_IDE - select BLK_DEV_IDEDISK - select BLK_DEV_IDECD - select BLK_DEV_IDEDMA - select IDE_GENERIC - help - Enables the ETRAX IDE driver. - config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 Index: b/drivers/ide/Kconfig =================================================================== --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -870,6 +870,41 @@ config BLK_DEV_IDE_BAST Say Y here if you want to support the onboard IDE channels on the Simtec BAST or the Thorcom VR1000 +config ETRAX_IDE + bool "ETRAX IDE support" + depends on CRIS && BROKEN + select BLK_DEV_IDEDMA + select IDE_GENERIC + help + Enables the ETRAX IDE driver. + + You can't use parallel ports or SCSI ports at the same time. + +config ETRAX_IDE_DELAY + int "Delay for drives to regain consciousness" + depends on ETRAX_IDE && ETRAX_ARCH_V10 + default 15 + help + Number of seconds to wait for IDE drives to spin up after an IDE + reset. + +choice + prompt "IDE reset pin" + depends on ETRAX_IDE && ETRAX_ARCH_V10 + default ETRAX_IDE_PB7_RESET + +config ETRAX_IDE_PB7_RESET + bool "Port_PB_Bit_7" + help + IDE reset on pin 7 on port B + +config ETRAX_IDE_G27_RESET + bool "Port_G_Bit_27" + help + IDE reset on pin 27 on port G + +endchoice + config IDE_H8300 bool "H8300 IDE support" depends on H8300