From: "Jan-Simon Möller" <dl9pf@gmx.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: sata NCQ blacklist entry
Date: Sat, 24 Nov 2007 00:50:06 +0100 [thread overview]
Message-ID: <200711240050.07236.dl9pf@gmx.de> (raw)
In-Reply-To: <20071122232109.efdbf1b4.akpm@linux-foundation.org>
Am Freitag 23 November 2007 08:21:09 schrieb Andrew Morton:
> On Tue, 13 Nov 2007 21:55:15 +0100 Jan-Simon M__ller <dl9pf@gmx.de> wrote:
> > Hi!
>
> You removed from cc the guys who are most likely to fix this. Please
> always do reply-to-all.
Sri, will remember that.
>
> > Just using kernel 2.6.24-rc2 (325d22df7b19e0116aff3391d3a03f73d0634ded).
> >
>
> So is this problem (which in another email you attributed to smartd)
Even without smartd in my default runlevel it happens at some point.
> also
> present in 2.6.23?
I compiled and tested 2.6.23.8. Smartd enabled, nothing noticed, dmesg is
really clean:
dmesg | grep ata
ACPI: SSDT 7F6D3C3F, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
PERCPU: Allocating 46888 bytes of per cpu data
Memory: 2042960k/2087744k available (2062k kernel code, 44396k reserved, 982k
data, 324k init)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
libata version 2.21 loaded.
ata1: SATA max UDMA/133 cmd 0xffffc2000034e100 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata2: SATA max UDMA/133 cmd 0xffffc2000034e180 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata3: SATA max UDMA/133 cmd 0xffffc2000034e200 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.12
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x0000000000011810 irq 14
ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x0000000000011818 irq 15
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33
ata4.00: configured for UDMA/33
EXT3-fs: mounted filesystem with ordered data mode.
>
> And is is still present in 2.6.24-rc3?
Went back to 2.6.24-rc3 ...
Yes, but not at boot when smartd is started.
dmesg | grep ata
ACPI: SSDT 7F6D3C3F, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
PERCPU: Allocating 46968 bytes of per cpu data
Memory: 2048732k/2087744k available (2219k kernel code, 38624k reserved, 992k
data, 344k init)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
libata version 3.00 loaded.
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 4347
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 4347
ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 4347
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.12
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33
ata4.00: configured for UDMA/33
EXT3-fs: mounted filesystem with ordered data mode.
ata1.00: exception Emask 0x2 SAct 0x73 SErr 0x0 action 0x2 frozen
ata1.00: spurious completions during NCQ issue=0x0 SAct=0x73
FIS=004040a1:00000008
ata1.00: cmd 60/10:00:d4:82:31/00:00:07:00:00/40 tag 0 cdb 0x0 data 8192 in
ata1.00: status: { DRDY }
ata1.00: cmd 60/08:08:9c:e5:cc/00:00:08:00:00/40 tag 1 cdb 0x0 data 4096 in
ata1.00: status: { DRDY }
ata1.00: cmd 60/10:20:24:61:25/00:00:09:00:00/40 tag 4 cdb 0x0 data 8192 in
ata1.00: status: { DRDY }
ata1.00: cmd 60/58:28:c4:65:25/00:00:09:00:00/40 tag 5 cdb 0x0 data 45056 in
ata1.00: status: { DRDY }
ata1.00: cmd 60/20:30:7c:f6:a3/00:00:05:00:00/40 tag 6 cdb 0x0 data 16384 in
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x2 SAct 0x187 SErr 0x0 action 0x2 frozen
ata1.00: spurious completions during NCQ issue=0x0 SAct=0x187
FIS=004040a1:00000040
ata1.00: cmd 60/08:00:ec:af:10/00:00:04:00:00/40 tag 0 cdb 0x0 data 4096 in
ata1.00: status: { DRDY }
ata1.00: cmd 60/10:08:8c:e6:d8/00:00:04:00:00/40 tag 1 cdb 0x0 data 8192 in
ata1.00: status: { DRDY }
ata1.00: cmd 60/20:10:24:1a:da/00:00:04:00:00/40 tag 2 cdb 0x0 data 16384 in
ata1.00: status: { DRDY }
ata1.00: cmd 61/01:38:15:b3:30/00:00:07:00:00/40 tag 7 cdb 0x0 data 512 out
ata1.00: status: { DRDY }
ata1.00: cmd 61/10:40:1c:b3:30/00:00:07:00:00/40 tag 8 cdb 0x0 data 8192 out
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
Thanks !
Best regards,
Jan-Simon
next prev parent reply other threads:[~2007-11-23 23:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20071107111813.GA9064@dudweiler.stuttgart.redhat.com>
2007-11-07 12:55 ` sata NCQ blacklist entry Tejun Heo
2007-11-08 20:25 ` Luca Tettamanti
2007-11-29 17:17 ` Bjoern Olausson
2007-11-29 22:57 ` Tejun Heo
2007-11-29 23:29 ` Bjoern Olausson
2007-11-29 23:32 ` Bjoern Olausson
[not found] ` <200711132155.15506.dl9pf@gmx.de>
2007-11-23 7:21 ` Andrew Morton
2007-11-23 23:50 ` Jan-Simon Möller [this message]
2007-11-24 18:24 ` Rafael J. Wysocki
[not found] <fa.GsS7Kps/lQSHlhBlf0yXpLzcPLQ@ifi.uio.no>
[not found] ` <fa.V2tP3GajMjY9gJUCTCoOjOocw+0@ifi.uio.no>
2007-11-08 0:10 ` Robert Hancock
[not found] ` <fa.N0UZia/Lx8cvsvXXK1g9So2J6rk@ifi.uio.no>
2007-11-08 23:32 ` Robert Hancock
2007-11-09 0:08 ` Luca Tettamanti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200711240050.07236.dl9pf@gmx.de \
--to=dl9pf@gmx.de \
--cc=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).