From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Subject: [PATCH 2/8] ide: add ide_set_irq() inline helper
Date: Thu, 29 Nov 2007 01:04:21 +0100 [thread overview]
Message-ID: <200711290104.21376.bzolnier@gmail.com> (raw)
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-io.c | 9 +++------
drivers/ide/ide-iops.c | 10 ++++------
drivers/ide/ide-probe.c | 12 ++++--------
drivers/ide/ide-taskfile.c | 3 +--
include/linux/ide.h | 5 +++++
5 files changed, 17 insertions(+), 22 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -939,8 +939,7 @@ static void ide_check_pm_state(ide_drive
if (rc)
printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
SELECT_DRIVE(drive);
- if (IDE_CONTROL_REG)
- HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
+ ide_set_irq(drive, 1);
rc = ide_wait_not_busy(HWIF(drive), 100000);
if (rc)
printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
@@ -1212,15 +1211,13 @@ static void ide_do_request (ide_hwgroup_
}
again:
hwif = HWIF(drive);
- if (hwgroup->hwif->sharing_irq &&
- hwif != hwgroup->hwif &&
- hwif->io_ports[IDE_CONTROL_OFFSET]) {
+ if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) {
/*
* set nIEN for previous hwif, drives in the
* quirk_list may not like intr setups/cleanups
*/
if (drive->quirk_list != 1)
- hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
+ ide_set_irq(drive, 0);
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -688,8 +688,7 @@ int ide_driveid_update(ide_drive_t *driv
*/
SELECT_MASK(drive, 1);
- if (IDE_CONTROL_REG)
- hwif->OUTB(drive->ctl,IDE_CONTROL_REG);
+ ide_set_irq(drive, 1);
msleep(50);
hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG);
timeout = jiffies + WAIT_WORSTCASE;
@@ -769,13 +768,12 @@ int ide_config_drive_speed(ide_drive_t *
SELECT_DRIVE(drive);
SELECT_MASK(drive, 0);
udelay(1);
- if (IDE_CONTROL_REG)
- hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
+ ide_set_irq(drive, 0);
hwif->OUTB(speed, IDE_NSECTOR_REG);
hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
- if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
- hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
+ if (drive->quirk_list == 2)
+ ide_set_irq(drive, 1);
error = __ide_wait_stat(drive, drive->ready_stat,
BUSY_STAT|DRQ_STAT|ERR_STAT,
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -364,22 +364,19 @@ static int try_to_identify (ide_drive_t
* the irq handler isn't expecting.
*/
if (IDE_CONTROL_REG) {
- u8 ctl = drive->ctl | 2;
if (!hwif->irq) {
autoprobe = 1;
cookie = probe_irq_on();
- /* enable device irq */
- ctl &= ~2;
}
- hwif->OUTB(ctl, IDE_CONTROL_REG);
+ ide_set_irq(drive, autoprobe);
}
retval = actual_try_to_identify(drive, cmd);
if (autoprobe) {
int irq;
- /* mask device irq */
- hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
+
+ ide_set_irq(drive, 0);
/* clear drive IRQ */
(void) hwif->INB(IDE_STATUS_REG);
udelay(5);
@@ -667,8 +664,7 @@ static int wait_hwif_ready(ide_hwif_t *h
/* Ignore disks that we will not probe for later. */
if (!drive->noprobe || drive->present) {
SELECT_DRIVE(drive);
- if (IDE_CONTROL_REG)
- hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
+ ide_set_irq(drive, 1);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -83,8 +83,7 @@ void ide_tf_load(ide_drive_t *drive, ide
tf->hob_lbam, tf->hob_lbah);
#endif
- if (IDE_CONTROL_REG)
- hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */
+ ide_set_irq(drive, 1);
if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0)
SELECT_MASK(drive, 0);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1302,4 +1302,9 @@ static inline ide_drive_t *ide_get_paire
return &hwif->drives[(drive->dn ^ 1) & 1];
}
+static inline void ide_set_irq(ide_drive_t *drive, int on)
+{
+ drive->hwif->OUTB(drive->ctl | (on ? 0 : 2), IDE_CONTROL_REG);
+}
+
#endif /* _IDE_H */
next reply other threads:[~2007-11-29 0:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-29 0:04 Bartlomiej Zolnierkiewicz [this message]
2008-07-07 15:47 ` [PATCH 2/8] ide: add ide_set_irq() inline helper Sergei Shtylyov
2008-07-07 17:00 ` Sergei Shtylyov
2008-07-07 18:05 ` Bartlomiej Zolnierkiewicz
2008-07-08 9:13 ` Sergei Shtylyov
2008-07-07 18:00 ` Bartlomiej Zolnierkiewicz
2008-07-08 9:10 ` Sergei Shtylyov
2008-07-11 21:20 ` Bartlomiej Zolnierkiewicz
2008-07-11 9:28 ` Sergei Shtylyov
2008-07-11 12:57 ` Sergei Shtylyov
2008-07-12 10:30 ` Bartlomiej Zolnierkiewicz
2008-07-10 12:11 ` Dubious IRQ masking in ide_config_drive_speed() Sergei Shtylyov
2008-07-11 19:39 ` Bartlomiej Zolnierkiewicz
2008-07-10 21:21 ` Sergei Shtylyov
2008-07-11 21:44 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200711290104.21376.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).